A circuit that has only a single path for current to flow through is best classified into which category? a series circuit an open circuit a parallel circuit a short circuit

It is because of the differences in specific heats. The specific heat of water is much higher than that of lead. It takes more heat to raise water to a boiling point and keep it there than it takes lead to maintain a temperature of of 300oC.

It's all due to specific heat. The answer, though poorly worded, is the last choice.

Answer:

because water's specific heat is much greater than that of lead, therefore this amount of lead cannot contain as much heat.

Answer:

Gravity pulls objects toward Earth.

The rate of acceleration due to gravity is 9.8 m/s2.

Weight on Earth’s surface is a result of gravity’s pull.

Explanation:

these are the answers for e2020

Gravity is a fundamental force that gives weight to objects and causes freefall. On Earth, it also causes the ocean tides and affects time, making it pass slower closer to Earth's surface. In our universe, it plays a vital role in the dynamics of celestial bodies.

Gravity is a force of attraction that exists between any two masses, any two bodies, any two particles. It is mathematically described as: F = G *(m1*m2)/r^2 where F is the force of attraction between the two bodies, m1 and m2 are the two masses, r is the distance between the centers of the two masses and G is the gravitational constant.

On Earth, gravity gives weight to physical objects and causes the ocean tides. The force of Earth's gravity comes from the object's mass and the acceleration due to gravity, which is approximately 9.8 m/s^2 at sea level. When an object is in freefall, the only force acting upon it is gravity.

Gravity also affects time and space, causing time to pass more slowly closer to the surface of the Earth compared to further away. This concept is known as time dilation. In essence, gravity is a crucial force that plays a key role in the structure and lifecycle of planets and the orbital movement of celestial bodies.

https://brainly.com/question/31321801

#SPJ2

Question: Two 1-kg point masses a distance d apart each exert a gravitational attraction F on the other one. If 1 kg is now added to each mass, the gravitational attraction exerted by each will be

Answer: 4f

Explanation:  a gravitational force is propotional to a square of distance between two point masses so we separate the masses to a distance

question answered by

(jacemorris04)

We know that the gravitational force is proportional to (m₁) · (m₂).

Now we want to know the force between (2·m₁) · (2·m₂).

Well, that's just the same as (2·2) · (m₁)·(m₂), which is  4 · (m₁)·(m₂) ... four times the original force.

So in this question, the new pair of gravitational forces will be 4·F in each direction.

This can be viewed as a decrease in the wavelength of the wave. A decrease in wavelength at a constant speed is associated with an increase in frequency since waves follow the equation v=f*λ, where λ is the wavelength and f is the frequency.

The initial speed doesn’t matter.  To reach the maximum height, you need to launch straight up ... 90 degrees above horizontal.

Answer:

90 degree

Explanation:

The height for the projectile motion is given by

H = u^2 Sin^2 theta/ 2g

Height is maximum when sin theta is maximum.

Sin theta is maximum when it's value is 1.

So the value of theta is 90 degree.

Answer:

the second one

Explanation:

play and get champs

if you invite me i will gift you.

X

Hot air rises = it's less dense than cold air = falls

Answer: X

Explanation:

In the given diagram, air moves as a result of convection currents. The air at the bottom, near the space heater gets heated up. As temperature rises, the density of air reduces. It becomes less dense and rises up. The least dense is at W. As the air rises, it gets cooled and becomes more dense and heavier and thus, sinks down. The highest density of air would be at X.

Answer:

(C) (see image of it attached)

Answer: circuit C

Explanation:

A DC voltage source supplies current in single direction. It is represented by alternate small and big straight lines.

An Ac voltage source supplies alternating current i.e. the current changes direction.

In the given circuit diagrams, only circuit C has a DC voltage source.

Answer:

1.6 kg

Step-by-step Solution:

Since Force = mass × acceleration we have:

F = 8N

a= 5 m/s^2

m = ?

By plugging the values above into F=ma we obtain:

[tex]F=ma\\\\8=m(5)\\\\\frac{8}{5}=\frac{m(5)}{5}\\\\m=\frac{8}{5}=1.6[/tex]

Therefore, the Chromebook has a mass of 1.6 kilograms.

Using Newton's second law of motion, we estimate that the mass of the chromebook would be 1.6 kg if it is thrown with a force of 8N and an acceleration of 5m/s².

In order to find the mass of the chromebook, we can use Newton's second law of motion, which states that Force equals Mass times Acceleration (F = ma).

If Mrs. Reichelt throws the chromebook with a force of 8N and it accelerates at 5m/s2, we can rearrange the equation as follows: Mass equals Force divided by Acceleration (m = F/a).

m = 8N / 5m/s2

As a result, the mass of the chromebook is 1.6 kg.

Learn more about Newton's second law here:

https://brainly.com/question/13447525

#SPJ6

63x1/2 + 65x0.3 + 67x1/5

=

64.4 average atomic mass

Answer:

3.339 N

Explanation:

In this problem, the box is moving at constant velocity, so the box is in motion and therefore we can consider only the kinetic friction.

The resultant of the forces acting on the box must be equal to the product of mass and acceleration:

[tex]F_{net}=ma[/tex]

However, the box is moving at constant velocity, so the acceleration is zero: a=0. Therefore,

[tex]F_{net}=0[/tex] (1)

There are two forces acting on the box:

- The push: F

- The kinetic friction on the box, equal to

[tex]-\mu_k mg[/tex]

where [tex]\mu_k = 0.1113[/tex] is the coefficient of kinetic friction and (mg)=30 N is the weigth of the box, and where the negative sign means it is in the opposite direction of the motion.

Therefore, eq.(1) becomes

[tex]F-\mu mg =0\\F= \mu mg=(0.1113)(30 N)=3.339 N[/tex]

Milli- ... thousandth ... 0.001

Centi- ... hundredth ... 0.01

Micro- ... millionth ... 0.000 001

Kilo- ... thousand ... 1,000

Mega- ... million ... 1,000,000

Answer:

Explanation:

first notice some physics; the mass of the ball (projectiles) is not germane. A 2 ton elephant launched at U = 28 m/s will go just as high, which is H = U^2/2g = 28^2/(2*9.8) = 40 meters.

The process of calculating the height reached by the ball involves equating the kinetic energy at the beginning of its trajectory with the potential energy at its highest point. By assigning values to the mass and initial speed variables in the equation (1/2 × m × v² = m×g×h), we find that the ball reaches a height of approximately 40 meters.

The subject of this question is physics, specifically a concept known as projectile motion. When Dave throws the tennis ball straight up into the air, the ball has initial kinetic energy but loses this energy as it gains potential energy, causing it to decelerate until it reaches its maximum height and momentarily stops before falling back down.

We can calculate the height using the formula for kinetic and potential energy. The initial kinetic energy (K.E) is given by the formula 1/2 × m × v², where m is the mass of the ball and v is the initial velocity of the ball. The potential energy (P.E) at the highest point is given by the formula m×g×h, where g is the acceleration due to gravity and h is the height. Therefore, the initial kinetic energy equals the maximum potential energy (1/2 × m × v² = m×g×h)

Since we know the mass (0.07 kg) of the ball and the speed (28 m/s) at which it was thrown, we can substitute these values into the equation to calculate the maximum height, h.

So, h = (1/2 × m × v²) / (m×g) = (1/2 × 0.07 kg × (28 m/s)²) / ( 0.07 kg × 9.8 m/s²). Therefore, the tennis ball will reach a height of approximately 40 meters.

https://brainly.com/question/29545516

#SPJ3

Answer:

Force  = 375 Newton or 375 kg m/s²

Explanation:

Force is the product of the mass of a body and the acceleration . Force is usually the push or pull of the mass of an object that is accompanied by the motion(acceleration). Force is a vector quantity  because it has both magnitude and direction. Example is when you throw a ball you apply a push, with the mass of the ball and the acceleration computed you can calculate the force applied .

Mathematically, force can be represented as

Force = mass × acceleration

F = ma

Force is measured in Newton or Kg m/s²

From the question;

mass  = 125 kg

acceleration = 3 m/s²

Force = 125 × 3 = 375 Newton or 375 kg m/s²

Force  = 375 Newton or 375 kg m/s²

Answer: 2.3 m/s/s

Explanation:

The car is traveling at a constant speed of 12 m/s and after acceleration, the speed is 26 m/s so the acceleration of the car will be 2.33 m/s².

The ratio of velocity to time is referred to as acceleration. It is a vector quantity with SI unit m/s².

There are several types of acceleration :

According to the question,

The initial velocity of the car, (u) is given as 12 m/s,

The final velocity of the car, (v) is given as 26 m/s and,

The time, (t) is given as 6 seconds

Use the equation of motion,

v = u + at

26 = 12 + (a)6

a = 14/6

a = 2.33 m/s².

Hence, the acceleration of the car is 2.33 m/s².

To know more about the Acceleration :

https://brainly.com/question/12550364

#SPJ2

the ball's momentum is 10 × 1.5 = 15 kg m/s

Answer : The momentum of ball is, 15 kg.m/s

Explanation :

Momentum : It is defined as the motion of a moving body. Or it is defined as the product of mass of velocity of an object.

Formula of momentum is:

[tex]p=mv[/tex]

where,  

p = momentum  = ?

m = mass  = 1.5 kg

v = velocity = 10 m/s

Now put all the given values in the above formula, we get:

[tex]p=(1.5kg)\times (10m/s)[/tex]

[tex]p=15kg.m/s[/tex]

Therefore, the momentum of ball is 15 kg.m/s

m1=3600 kg

m2=900 kg

G1=m1g

G2=m2g

G2/G1=m2g/m1g=m2/m1=3600/900=4

Answer:

The answer is B. 1/4

Explanation:

Both objects are on the same planet therefore gravity acts the same upon each.

Object C mass is 3600 kg.

Object D mass is 900 kg.

The mass of Object C is 4 times the mass of Object D. (3600 / 900=4)

The mass of Object D is 1/4 times the mass of Object C. (900 / 3600=1/4)

Mass is proportional to weight. The more the mass, the more the weight.

Object C is heavier. Object D is lighter.

It's asking for the weight ratio of Object D to Object C therefore 900 is divided by 3600 to come to 1/4.

Position ' C ' is the middle of the swing.  That's where the weight is the lowest.

It's also the place where the weight is moving the fastest, so that means it's the place where the kinetic energy is greatest.

Answer:

At point C

Explanation:

The velocity of the pendulum is maximum at its mean position, i.e., at C.

Formula for Kinetic energy is given by

[tex]K = 1\div 2\times m\times v^{2}[/tex]

As velocity is maximum at C so kinetic energy is also maximum at C.

Answer:

4 Ohms

Explanation:

The challenging part in this circuit is the bridged setup (diamond-shaped arrangement made of the 4 Ohm resistors). In general, this would first need to be transformed using the Wye-Delta transform to be solved, but in this case we can make a valid simplification: since the diamond arrangement is completely symmetrical, the voltage at the top and the bottom tip of the "diamond" will be identical and no current flows through the 4 Ohm bridge, hence, this resistor can be removed without changing the resulting resistance. After this, it is easy to see that the equivalent resistance of the modified "diamond" is just 4 Ohms.

The remaining top parallel branch of the circuit will be 8 Ohms, and the bottom parallel branch is nominally 8 Ohms. The resulting resistance therefore is 4 Ohms.

(The answer is not 2 Ohms!)

The superior and inferior vena cava are the two main blood vessels that bring de-oxygentated blood back to the heart after the blood's done a circuit of the body to offload its oxygen to organs and muscles and tissues and cells, etc. The blood from these vessels enters the right atrium of the heart. Once the atrium is full of blood it contracts, pushing the blood through the open tricuspid valve into the right ventricle of the heart. The tricuspid valve closes shut once the blood is in the right ventricle, preventing the blood from returning to the right atrium. While the valve is closed, the ventricle contracts, pushing the blood out of the heart through the pulmonic valve, into the pulmonary artery, where it is carried directly to the lungs where it gets a new supply of oxygen attached to it. The freshly oxygenated blood courses along the pulmonary vein from the lungs back to the heart, entering the heart's left atrium. When the left atrium is full of blood, it empties by contraction, through the open mitral valve, into the left ventricle of the heart. The mitral valve then closes, so the blood cannot retrace its path. The left ventricle then contracts, pushing the blood out of the heart through the aortic valve into the big blood vessel called the aorta, from where it courses round the body delivering oxygen again.

Answer:

Explanation:

W = work done by the spring on the toy car = 196 Joules

m = mass of the toy car = 2 kg

v₀ = initial velocity of the car when at rest = 0 m/s

v = final velocity of the car after spring does work on it = ?

According to work-change in kinetic energy, net work done on an object is same as the change in kinetic energy of the object . hence

Net work done = Final kinetic energy - initial kinetic energy

W = (0.5) m (v² - v₀²)

inserting the values

196 = (0.5) (2) (v² - (0)²)

v² = 196

v = sqrt(196)

v = 14 m/s

The final velocity of the toy cars is 14 m/s

Given data:

The mass of toy car is, m = 2 kg.

The work performed by the spring is, W = 196 J.

In the given problem, the work done by the spring provides the necessary kinetic energy to the toy car. Therefore, work -energy theorem can be applied.

According to work-energy theorem, the work done on an objects is equal to the change in kinetic energy of the object .So,

W = KE

Solving as,

[tex]W = \dfrac{1}{2} mv^{2} \\\\196=\dfrac{1}{2} \times 2 \times v^{2}\\v = 14 \;\rm m/s[/tex]

Thus, we can conclude that the final velocity of the toy cars is 14 m/s .

Learn more about the kinetic energy from here;

https://brainly.com/question/17858145

B. model; it is the model of the sun

Answer: B

Explanation: a light bulb

There are no statements that describe the Curies' work well on the list of choices you provided.

(And their name was "Curie", not "Cutie".)

there is  no answer choices

The answer is Radio Waves

Given data

height (h) = 25 m ,

velocity (v) = ?

we know that,

                     v²-u² = 2as

                      initial velocity (u) = 0,

                                                a = g = 9.8 m/s ,

                  Now the equation becomes,

                                     v² = 2 × g × h

                                         = 2 × 9.8 × 25

                                     v² = 490.5

                                     v = √490.5

                                    v = 22.1 m/s

Therefore answer is C , i.e., 22 m/s (If you like this procedure, give me brainiest)

Answer:

c

Explanation:

p=m•v=25•4=100 kg•m/s

As asked in question the momentum of the 25kg object moving at 4 m/s is 100 kilogram meters per second (kg·m/s).

To calculate the momentum of a 25-kilogram object moving at a speed of 4 meters per second, you can use the formula for momentum:

Momentum (p) = Mass (m) × Velocity (v)

Where:

Mass (m) is 25 kilograms (kg)

Velocity (v) is 4 meters per second (m/s)

Now, plug in these values:

Momentum (p) = 25 kg × 4 m/s = 100 kg·m/s

So, the momentum of the 25kg object moving at 4 m/s is 100 kilogram meters per second (kg·m/s).

To know more about momentum, here
brainly.com/question/30677308

#SPJ3

Answer:

tim e (t) = 20 min.

            = 20 × 60 = 1200 s ,

Work ( W) = 4560000 J

                 = 4560 KJ ,

Determine:

                 Power output (P) = Work ÷ time

                                              = 4560 ÷  1200

                                            P  = 3.8 KW

Given that:

Mass (m) = 20 g = 0.02 Kg,

temperature (T₁) = -10°C = -10+273 = 263 K

temperature (T₂) = 10°C = 10+273 = 283 K

Specific heat of water (Cp) = 4.187 KJ/Kg k

We know that Heat transfer (Q) = m. Cp.( T₂ - T₁)

                                                    = 0.02 × 4.187 × (283-263)

                                                 Q = 1.67 KJ

Heat transferred is 1.67 KJ

The number-labels don't show in the picture, so we don't know the number of the correct one.

The correct path is the one shown in the upper-right panel.  The path of the light beam forms the shape of the letter ' V ', with the point at the bottom, down on the book.