A film with n = 1.60 is deposited on glass. what is the thinnest film that will produce constructive interference in the reflection of light with a wavelength of 510 nm ?

To find the momentum of the electron after collision with a photon, the momentum of the photon must be calculated first using Planck's constant and the wavelength of the photon. The kinetic energy of the electron depends on the specific details of the conservation of energy and momentum in the collision, which are not provided.

The question involves calculating the momentum of the electron and the kinetic energy of the electron after it collides with a photon. This scenario is explored in the context of compton scattering, which is a common topic in high school and college physics classes.

To find the momentum of the electron, we use the relationship for the momentum (p) of a photon, which is given by p = h/λ, where h is Planck's constant (6.63 × 10-34 m² kg/s) and λ is the wavelength of the photon. For an 0.828-nm photon, this yields a momentum that the electron will take after the collision.

However, without additional information on the scattering angle or final energy/wavelength of the photon, we cannot accurately determine the momentum or the kinetic energy of the electron, as these values depend on the specifics of the conservation of energy and momentum in the collision process.

https://brainly.com/question/13435570

#SPJ3

A concave mirror is curved inward in the middle, more like a cave. Because the mirror is curved inward, the angle of the light surface can be focused similar to that of the camera. They can form real images that are projected out in front of the mirror at the place where light focuses. When the object is located at the center of the curvature the image formed will also be at the curvature. The image will be inverted and the magnification value is equal to 1 which will become a real image because the ray of light converges at the location of the formed image.

Answer:

The object must be farther from the mirror than the focal point

Explanation:

gradpoint lesson

The components of Earth's life support system are air, water, soil, and living organisms.  

The life support system is necessary for living organisms. It elements are necessary to promote living organisms and give sustainable life to living organisms.

It is a system that provides all the substances which is essential for the living. It is the combination of equipment that allows the survival in environment.

Life support systems offer food, oxygen, water, and the disposition of carbon and wastes. It includes the atmosphere(air), hydrosphere (water), biosphere (living organisms), and geosphere (soil).

The atmosphere offers air (oxygen) for living organisms to breathe. Hydrosphere offers water for living organisms and the geosphere offers shelter for living organisms.

Hence the components of Earth's life support system are air, water, soil, and oxygen.

To learn more about the Life support system:

https://brainly.com/question/11724650

#SPJ3

To solve this problem, we assume that the wavelength of the light in air is 500 nanometers.

For this case we only need the refractive index of the polystyrene. For an antireflective coating, we need a quarter of wave thickness at the wavelength in the air. Which means that the antireflective coating needs to be as thick as 1/4 of the wavelength, divided by the coating’s refractive index. This is expressed mathematically in the form:

x = λ / (4 * n)

where,

x = thickness

λ = wavelength of light

n = index of refraction of polystyrene

Substituting:

x = 500 nm / (4 * 1.49)
x = 500 nm / 5.96
x = 83.90 nm

The minimum thickness of the film required assuming that the wavelength of the light in air is 500 nanometers is; 83.9 nm

We are given;

Index of refraction of polystyrene; η_p = 1.49

Index of refraction of Fabulite; η_f = 2.409

Wavelength of the light in air; λ = 500 nm

In this question, it will be discovered that light will first of all be reflected two times, first from the upper layer of coating and then from the interface between the coating and the polystyrene material.

The additional path travelled by the light in coating is 2t while the path difference is 2tη_p.

Thus, minimum thickness of film required will be gotten from the formula used in destructive interference which is;

2tη_p = λ/2

t = λ/2 * 1/2η_p

t = λ/(4η_p)

t = 500/(4 * 1.49)

t = 83.9 nm

Read more about Destructive Interference at; https://brainly.com/question/3541385

The relationship of the two is that, the sound intensity is inversely proportional to the square of the distance of the source.

I α 1 / r^2

Where I = intensity and r = distance from source

From this, we can equate two conditions 1 and 2:

I1 / I2 = r2^2 / r1^2

So when r2 = 2 r1, the intensity becomes:

I1 / I2 = (2r1 / r1)^2

I1 / I2 = 4

I2 = I1 / 4

So when we double the distance of the source, the intensity of the sound reduces by a factor of 4 (divided by 4).

The correct answer is[tex]\(\boxed{\omega \approx 479.0 \text{ rad/s}}\)[/tex].

To determine the angular velocity of the head when[tex]\(\theta = 30^\circ\),[/tex] we need to integrate the angular acceleration with respect to time. However, since angular acceleration is given as a function of [tex]\(\theta\)[/tex], we will use the relationship between angular acceleration [tex](\(\alpha\))[/tex], angular velocity[tex](\(\omega\))[/tex], and angle [tex](\(\theta\))[/tex] to find the angular velocity as a function of [tex]\(\theta\).[/tex]

The relationship between angular acceleration, angular velocity, and angle is given by:

[tex]\[\alpha = \frac{d\omega}{dt} = \frac{d\omega}{d\theta} \cdot \frac{d\theta}{dt} = \omega \frac{d\omega}{d\theta}\][/tex]

Since[tex]\(\alpha\)[/tex]is a function of [tex]\(\theta\)[/tex], we can write:

[tex]\[\omega \frac{d\omega}{d\theta} = 700\cos\theta + 70\sin\theta\][/tex]

To find [tex]\(\omega\),[/tex] we separate variables and integrate:

[tex]\[\int \omega \, d\omega = \int (700\cos\theta + 70\sin\theta) \, d\theta\][/tex]

Integrating both sides, we get:

[tex]\[\frac{\omega^2}{2} = 700\sin\theta - 70\cos\theta + C\][/tex]

where [tex]\(C\)[/tex] is the constant of integration. To find [tex]\(C\)[/tex], we use the initial condition that the head is initially at rest, which means[tex]\(\omega = 0\)[/tex] when [tex]\(\theta = 0\)[/tex]. Plugging these values into the equation, we find:[tex]\[0 = 700\sin(0) - 70\cos(0) + C\]\[C = 70\][/tex]

Now we have the constant[tex]\(C\)[/tex], and we can find the angular velocity when [tex]\(\theta = \frac{\pi}{6}\) radians (or \(30^\circ\)):[/tex][tex]\[\frac{\omega^2}{2} = 700\sin\left(\frac{\pi}{6}\right) - 70\cos\left(\frac{\pi}{6}\right) + 70\] \[\frac{\omega^2}{2} = 700\left(\frac{1}{2}\right) - 70\left(\frac{\sqrt{3}}{2}\right) + 70\] \[\frac{\omega^2}{2} = 350 - 35\sqrt{3} + 70\] \[\frac{\omega^2}{2} = 420 - 35\sqrt{3}\][/tex]

Multiplying both sides by 2 to solve for[tex]\(\omega^2\)[/tex]:

[tex]\[\omega^2 = 2(420 - 35\sqrt{3})\]\[\omega^2 = 840 - 70\sqrt{3}\][/tex]

Taking the square root of both sides to find [tex]\(\omega\)[/tex]:

[tex]\[\omega = \sqrt{840 - 70\sqrt{3}}\][/tex]

Now we can calculate the numerical value:

[tex]\[\omega \approx \sqrt{840 - 70 \times 1.732}\] \[\omega \approx \sqrt{840 - 121.24}\] \[\omega \approx \sqrt{718.76}\] \[\omega \approx 479.0 \text{ rad/s}\][/tex]

Therefore, the angular velocity of the head[tex]when \(\theta = 30^\circ\) is approximately \(\boxed{479.0 \text{ rad/s}}\)[/tex]

The force the ground exerts on him is 650 N.

The push or pull on an object with mass that causes it to change its velocity.

According to law of newton

"Every action has an equal and opposite reaction."

This means that the ground is exerting the same amount of force as the man, 650 N.

To learn more about Force here

https://brainly.com/question/13191643

#SPJ2

The boat takes 7.75 seconds to reach the buoy and its velocity when it reaches the buoy is 0 m/s.

To solve this problem, we can use the equations of motion under constant acceleration. Let's start with part (a).

Given:

Initial velocity, v0 = 31.0 m/s

Final velocity, v = 0 m/s (since the boat reaches the buoy and stops)

Acceleration, a = -4.00 m/s2

We can use the equation:

v = v0 + at

Substituting the given values, we have:

0 = 31.0 - 4.00t

4.00t = 31.0

t = 7.75 s

Therefore, it takes the boat 7.75 seconds to reach the buoy.

Now, let's move on to part (b).

To find the final velocity, we can use the same equation:

v = v0 + at

Substituting the known values:

v = 31.0 - 4.00(7.75)

v = 31.0 - 31.0

v = 0 m/s

Therefore, the velocity of the boat when it reaches the buoy is 0 m/s.

The wavelength of a standing wave is equivalent to:

wavelength = 2 l / n

Where l is the length of the string and n is the number of segments.

so, wavelength = 2 (0.2 m) / 5 
wavelength = 0.08m      (ANSWER)

Answer:

[tex]\lambda=80\ cm[/tex]

Explanation:

It is given that,

Length of the string, L = 200 cm = 2 m

Frequency, f = 120 Hz

It vibrates in 5 distinct segments such that there is fifth harmonics. For a string fixed at both ends, the wavelength is given by :

[tex]\lambda=\dfrac{2}{5}L[/tex]

[tex]\lambda=\dfrac{2}{5}\times 2[/tex]

[tex]\lambda=0.8\ m[/tex]

[tex]\lambda=80\ cm[/tex]

So, the wavelength of the string fixed at both ends is 80 cm. Hence, this is the required solution.

Answer:

I = 0.667 A

Explanation:

A capacitor behaves like a short circuit at t = 0 immediately after the switch is closed, therefore we can discard it from the equation, the resistance is given in watts or power units equivalent to current by voltage and the ammeter behave like a short circuit by nature.

Considering all of the above, the circuit looks like a battery in series with a resistor, therefore, we can use the power equation to solve the problem as follow:

P = I*V

4W = I*6V

I = 0.667 A  

I believe that L is in feet while t is in seconds. To find for the hang time, all we have to do is to plug in the value of L in feet in the equation.

4 inches is equivalent to 4/12 feet or 0.33 feet, therefore the total L is:

L = 4.33 ft

Using the equation to find for t:

L = 4 t^2

4.33 = 4 t^2

t = 1.04 s

To calculate the hang time for a basketball player with a vertical leap of 4 feet 4 inches, solve the equation l = 4[tex]t^2[/tex] to find that the hang time is approximately 1.041 seconds.

The vertical leap l is related to the hang time t by the equation l = 4[tex]t^2[/tex]. To find the hang time for a basketball player with a vertical leap of 4 feet 4 inches (which is 4.333 feet), we plug this value into the equation and solve for t:

4.333 = 4[tex]t^2[/tex]

[tex]t^2[/tex] = 4.333 / 4

[tex]t^2[/tex] = 1.08325

t = [tex]\sqrt{(1.08325)[/tex]

t ≈ 1.041

Hence, the hang time for this leap is approximately 1.041 seconds.

To find the initial speed of the car when the brakes were first applied, you can use the formula: v^2 = u^2 + 2as. Plugging in the given values, we find that the car was traveling at approximately 28.3 ft/s (or 19.3 mph) when the brakes were first applied.

To find the initial speed of the car when the brakes were first applied, you can use the formula:

v^2 = u^2 + 2as

Plugging in the values into the formula, we get:

0 = u^2 + 2(8)(100)

Solving for u, we find that the car was traveling at approximately 28.3 ft/s (or 19.3 mph) when the brakes were first applied.

https://brainly.com/question/12905184

#SPJ3

To answer this problem, we will use the formula for gravitational force:

F = G m1 m2 / r^2

Where,

G = gravitational constant (6.67 * 10^-11)

m = mass of a body

r = distance between two bodies

To have a net gravitational force equal to zero acting on body of mass 1 kg, then the forces of 1 kg and 10 kg bodies and 1 kg and 5 kg bodies should be equal.

F1 (1 kg and 10 kg) = F2 (1 kg and 5 kg)

Therefore,

(1 kg) (10 kg) / (2 m)^2 = (1 kg) (5 kg) / r2^2

Calculating for r2 (distance of another body 5 kg from body of mass 1 kg):

r2^2 = 2

r2 = 1.41 m       (ANSWER)

Therefore another body of mass 5 kg should be placed 1.41 m from body of mass 1 kg to have a net gravitational force equal to zero.

Answer:

The acceleration of the bike that speeds up from 0m/s to 9m/s in 3 seconds is 3m/s². Details about acceleration can be found below.

The acceleration of a moving body can be calculated by dividing the change in velocity of the body by the time taken.

According to this question, a bike speeds up from 0m/s to 9m/s in 3 seconds. The acceleration can be calculated as follows:

a = (9m/s - 0m/s)/3 seconds

a = 9m/s ÷ 3s

a = 3m/s²

Therefore, the acceleration of the bike that speeds up from 0m/s to 9m/s in 3 seconds is 3m/s².

Learn more about acceleration at: https://brainly.com/question/12550364

#SPJ2

The types of chemical reactions are

a) Combination reaction.

b) Decomposition reaction.

c) Displacement reaction.

d) Double Displacement reaction.

e) Precipitation Reaction.

In a chemical reaction, one or more chemicals , also known as reactants are changed into one or more other substances, known as products. In a chemical reaction, the atoms that make up the reactants are rearranged to produce various products.

Chemical equations, which depict the reactants and products of the reaction using chemical symbols and chemical formulae, can be used to represent chemical reactions. The relative numbers of atoms or molecules participating in the reaction are indicated by the coefficients placed in front of the chemical formulae.

Given data ,

The types of chemical reactions are given as

Combination reaction, Decomposition reaction , Displacement reaction , Double Displacement reaction , Precipitation Reaction

And , the characteristics of a chemical reaction are evolution of gas , formation of a precipitate , change in color or temperature and state , formation of new substances

Thermodynamic and kinetic characteristics govern the many types of chemical processes, and they may be modeled by a number of factors including energy, entropy, and Gibbs free energy change.

Hence , the types of chemical reactions are solved

To learn more about chemical reactions click :

https://brainly.com/question/21590658

#SPJ6

The term for the surface or material that underlies a two-dimensional work of art is 'substrate'. It plays a critical role in the final appearance of the artwork, and its understanding is key to appreciating a given piece of art.

The surface or material that underlies a two-dimensional work of art is called the substrate. This term refers to the material on which the artwork is created. For example, in a painting, the substrate could be the canvas. Similarly, for a drawing, the substrate might be a piece of paper. The substrate plays a vital role in the final appearance of the artwork.

One can relate the concept of substrate in art to Aristotle's explanation of substance as a composite of matter and form. In his perspective, the form is the unchanging purpose or idea informing each particular instance, while the substrate (in his terminology, matter or material cause) contributes to the physical properties of the artwork. Therefore, understanding the substrate is an essential aspect of appreciating a given piece of art.

https://brainly.com/question/36266386

#SPJ11

Answer:

Average temperature of the cup of coffee.

Explanation:

If for a sample of population it’s related with statistics.

But in a parameter the whole population should be considered in a survey.  

When the all customers in consideration of this survey it’s considered as a parameter.  

Further explanation:  

Parameters are numbers which are summarize data for an entire population. But statistics are used to summarize data by using a sample.  

An unknown population average is known as a parameter. A known sample average is known as a statistic. Here the survey has done with all the customers come to the shop daily. This is considered to be a parameter. If it is a statistic they should select a specific sample of customers.  

But since all the customers comes to the shop has been considered in the survey this is a parameter of average temperature of sup of coffee consume by customers.  

Learn more:

1. statistic https://brainly.com/question/12999800 (answer by ardni313)

Keywords:

Average temperature, statistic, samples and parameter

The parameter defines the statistical attributes or measures which is derived from a population. Since the average measure of temperature of coffee is derived from a total population, it is a parameter.

Therefore, the average temperature of value of the coffee is derived from the population. Hence, it is the Parameter.

Learn more : https://brainly.com/question/14254277

The potential difference vab between points a and b when the switch s is open can be calculated using the formula VAB = Ed where E is the electric field intensity and d is the distance between the points.

The potential difference vab between points a and b when the switch s is open can be calculated using the formula VAB = Ed, where E is the electric field intensity and d is the distance between the points. The potential difference is measured in volts (V).

https://brainly.com/question/30893775

#SPJ12