A post is wrapped two full turns around with a belt. The tension in the belt is 7500 N by exerting a force of 150 N on its free end. Determine the coefficient of static friction between the belt and the post.

Answer:

Option (3)

Explanation:

Nicolaus Copernicus was an astronomer from Poland, who was born on the 19th of February in the year 1473. He played a great role in the field of modern astronomy.

He was the person who contributed to the heliocentric theory. This theory describes the position of the sun in the middle of the universe, and all the planets move around the sun. This theory was initially not accepted, and after about a century it was widely accepted.

This theory describes the present-day motion of the planets around the sun in the solar system. This theory replaced the geocentric theory.

Thus, the correct answer is option (3).

Answer:

I think it is option 'c' in the quiz.

Explanation:

I took the test and got a 100.

Final answer:

To find the Earth's average density, we divide its mass (5.94×10²⁴ kg) by its volume converted to cubic meters (1.08×10²⁴ m³), resulting in a density of approximately 5.5 kg/m³.

Explanation:

An object's average density is defined as the ratio of its mass to its volume (rho = M/V). To calculate the Earth's average density, we use the given mass of the Earth (5.94×10²⁴ kg) and the given volume of the Earth (1.08×10¹² km³).

It's important to convert the volume from cubic kilometers to cubic meters to ensure consistency in units since density is typically expressed in kilograms per cubic meter (kg/m³). There are 1,000,000,000,000 (1×10¹²) cubic meters in one cubic kilometer, so the volume in cubic meters is 1.08×10¹² km³ × 1×1012 m³/km³ = 1.08×1024 m³.

Now, dividing the mass by the volume in consistent units gives:

Density = Mass / Volume = 5.94×10²⁴ kg / 1.08×10²⁴ m³ = 5.5 kg/m³

Therefore, The average density of Earth is roughly 5.5 kg/m³.

Answer:

d. interaction atmosphere and biosphere interaction

Explanation:

hydrosphere, lithosphere, and biosphere interaction.

Answer:

44.1613858478 m/s

Explanation:

t = Time taken

u = Initial velocity = 0

v = Final velocity

s = Displacement = 99.4

a = Acceleration

g = Acceleration due to gravity = 9.81 m/s² = a

[tex]v^2-u^2=2as\\\Rightarrow v=\sqrt{2as+u^2}\\\Rightarrow v=\sqrt{2\times 9.81\times 99.4+0^2}\\\Rightarrow v=44.1613858478\ m/s[/tex]

If air resistance was absent Dan Koko would strike the airbag at 44.1613858478 m/s

Answer:

A) 0.20Joules

Explanation:

The type mechanical energy acting on the body is potential energy since the body is covering a particular height.

Potential Energy = mass×acceleration due to gravity × height

Mass of the body = 0.1kg

acceleration due to gravity = 10m/s²

h is the height of the object when dropping = 1.0meters

Substituting this values in the formula to get the energy of the body on dropping, we have;

PE = 0.1×10×1.0

PE = 1.0Joules

On bouncing back to height of 0.8m, the potential energy becomes

PE = 0.1×10×0.8

PE = 0.8Joules

The mechanical energy lost by the ball as it bounces will approximately be the difference in its potential energy when dropping and when it bounces back i.e 1.0Joules - 0.8Joules = 0.20Joules

0.2 J

mgh (before) = (0.1)(9.8)(1) = 0.98

mgh (after) = (0.1)(9.8)(0.8) = 0.784

0.98-0.784=0.196

0.196 is approximately 0.2.  

Answer:

Explanation:

Given

Charge [tex]Q_1=+5.5\mu C[/tex]

[tex]Q_2=-17\ mu C[/tex]

When the two charges are touch then the net charge on the two sphere will be same after some time

[tex]Q=\frac{Q_1+Q_2}{2}[/tex]

[tex]Q=\frac{5.5-17}{2}=-5.75\ \mu C[/tex]

Now the force between this tow charges are when they are separated with [tex]d=60\ mm[/tex]

[tex]F=\frac{kq_1q_2}{r^2}[/tex]

[tex]F=\frac{9\times 10^9\times (-5.75)^2}{(60\times 10^{-3})^2}[/tex]

[tex]F=82.65\ N[/tex]

Answer: perpendicular to it oscillations.

Explanation: A transverse wave is a wave whose oscillations is perpendicular to the direction of the wave.

By perpendicular, we mean that the wave is oscillating on the vertical axis (y) of a Cartesian plane and the vibration is along the horizontal axis (x) of the plane.

Examples of transverse waves includes wave in a string, water wave and light.

Let us take a wave in a string for example, you tie one end of a string to a fixed point and the other end is free with you holding it.

If you move the rope vertically ( that's up and down) you will notice a kind of wave traveling away from you ( horizontally) to the fixed point.

Since the oscillations is perpendicular to the direction of wave, it is a transverse wave

In a transverse wave, the vibrations move in a direction perpendicular to the direction of wave travel. This distinguishes them from other types of waves. An example is the movement of water waves.

In a transverse wave, the vibrations or disturbances move in a direction perpendicular (at right angles) to the direction of the wave's travel. This is the key characteristic that separates transverse waves from other types of waves. A common example of transverse waves would be waves in a body of water where the water particles move up and down causing the wave to move forward.

https://brainly.com/question/33916729

#SPJ6

Answer:

For the first one it would be screw and for the second one it is a ramp

Explanation:

Hope this helps

Answer:

A

Explanation:

Why is that they truly evaluate both of the theories in the same way.

Explanation:

First, we will calculate the electric potential energy of two charges at a distance R as follows.

                   R = 2r

                      = [tex]2 \times 0.1 m[/tex]

                      = 0.2 m

where,    R = separation between center's of both Q's. Hence, the potential energy will be calculated as follows.

                U = [tex]\frac{k \times Q \times Q}{R}[/tex]

                    = [tex]\frac{8.98 \times 10^{9} \times (3 \times 10^{-6} C)^{2}}{0.1}[/tex]

                    = 0.081 J

As, both the charges are coming towards each other with the same energy so there will occur equal sharing of electric potential energy between these two charges.

Therefore, when these charges touch each other then they used to posses maximum kinetic energy, that is, [tex]\frac{U}{2}[/tex].

Hence,   K.E = [tex]\frac{U}{2}[/tex]

                     = [tex]\frac{0.081}{2}[/tex]

                     = 0.0405 J

Now, we will calculate the speed of balls as follows.

                 V = [tex]\sqrt{\sqrt{\frac{2 \times K.E}{m}}[/tex]

                     = [tex]\sqrt{\sqrt{\frac{2 \times 0.0405}{4 kg}}[/tex]

                     = 0.142 m/s

Therefore, we can conclude that final speed of one of the balls is 0.142 m/s.

Frequency division multiplexing operates by dividing the signal into different frequencies

Explanation:

The technique that is used in the networking is the Frequency Division Multiplexing. using this technique, the existing bandwidths can be partitioned into different frequency bandwidths. These are not interrupting with each other. Each bandwidth can be used for carrying signals individually.

Using this technique many users can share a particular communication medium and they will not be interrupted with each other's communication.Hence this technique can also be termed as Frequency Division Multiple Access.

Frequency Division Multiplexing operates by dividing a signal into different frequencies to enable multiple transmissions at the same time. This method is used in FM radio and television broadcasts, as well as cell phone conversations and computer data transmissions.

Frequency Division Multiplexing (FDM) operates by dividing the signal into different frequencies. This can be seen in how FM (Frequency Modulation) radio signals are used. In FM radio transmission, the information is carried by varying the frequency of the carrier wave and keeping its amplitude constant. This forms different channels on which multiple signals can be transmitted simultaneously without interfering with each other.

Another example is how television broadcasts. Since a vast amount of visual and audio information needs to be carried, each channel requires a larger range of frequencies, these fall under VHF and UHF (high to ultra-high frequencies).

Cell phone conversations and computer data are also transmitted using a similar approach by converting the signal into a sequence of binary ones and zeros. This binary sequence can be transmitted via different frequencies, allowing multiple data transmissions to take place at the same time.

https://brainly.com/question/34388181

#SPJ12

Answer:

D.

Explanation:

It just makes sense. It is a simple answer

Answer: Acoustic or sound wave

Explanation:

Acoustic wave is a type of wave energy that travels through a medium by adiabatic compression and decompression, they have acoustic velocity which is determined by the type and nature of medium they travel through. They are mechanical and longitudinal waves with characteristic features such as amplitude, period, frequency and wavelength.

Answer: 0.5m/s

This value may vary depending on the initial velocity value.

Explanation:

The question is incomplete due to absence of the initial velocity (U) of the rock. Taking the initial velocity as any value say 10m/s at 30° above the horizontal.

Time it will take to reach maximum height (Tmax) will be Usin(theta)/g

Where U is the initial velocity = 10m/s theta = 30° g is the acceleration due to gravity = 10m/s²

Substituting the values in the formula we have;

Tmax = 10sin30°/10

Tmax = sin 30°

Tmax = 0.5second

Therefore, it will take for the rock 0.5s to reach the maximum height of its trajectory if the velocity is 10m/s.

The time varies though depending on the value of the initial velocity.

Answer:

B. 10 days

Explanation:

Answer:

Explanation:

Given

acceleration of a particle is given by [tex]a(t)=pt^2-qt^3[/tex]

[tex]a=\frac{\mathrm{d} v}{\mathrm{d} t}=pt^2-qt^3[/tex]

[tex]dv=(pt^2-qt^3) dt[/tex]

Integrating we get

[tex]\int dv=\int \left ( pt^2-qt^3\right )dt[/tex]

[tex]v=\frac{pt^3}{3}-\frac{qt^4}{4}+c_1[/tex]

at [tex]t=0\ v=0[/tex]

therefore [tex]c_1=0[/tex]

We know velocity is given by

[tex]v=\frac{\mathrm{d} x}{\mathrm{d} t}[/tex]

[tex]vdt=dx[/tex]

integrating

[tex]\int dx=\int \left ( \frac{pt^3}{3}-\frac{qt^4}{4}+\right )dt[/tex]

[tex]x=\frac{pt^4}{12}-\frac{qt^5}{20}+c_2[/tex]

using conditions

at [tex]t=0\ x=0[/tex]

[tex]c_2=0[/tex]

[tex]x=\frac{pt^4}{12}-\frac{qt^5}{20}[/tex]                          

(a) The velocity of the particle as function of time is pt³/3 - qt⁴/4 + C.

(b) The position of the particle as function of time is pt⁴/12 - qt⁵/20 + Ct + C.

The velocity of the particle is the integral of the acceleration of the particle.

The velocity of the particle is calculated as follows;

v = ∫a(t)

v = ∫(pt² - qt³)dt

v = pt³/3 - qt⁴/4 + C

The position of the particle as function of time is the integral of velocity of the particle.

x = ∫v

x = ∫(pt³/3 - qt⁴/4 + C)dt

x = pt⁴/12 - qt⁵/20 + Ct + C

Learn more about velocity and position here: https://brainly.com/question/24445340

Answer:

Explanation:

This question is quite tricky. Not all parameters were provided.

λ = 515nm(nm = namo meters), 515 nm becomes 515 x 10^-9 which in turn becomes 5.15 x 10^-7.

The velocity for the green light wasn't provided but the velocity of greenlight is a constant; velocity of green light(v) = 3.00 × 108 m/s.

frequency of the light =[tex]\frac{velocity of green light}{wavelength of light}\\[/tex]

f =[tex]\frac{3.00 X 108 m/s}{5.15 X 10^{-7} }[/tex]

f=20.971 Hertz

The frequency of light will be "20.971 Hz".

According to the question,

Wavelength,

or,

          [tex]= 5.15\times 10^{-7} \ m[/tex]

Velocity of green,

The frequency of light (f) will be:

= [tex]\frac{Velocity}{Wavelength}[/tex]

= [tex]\frac{3.00\times 108}{5.15\times 10^{-7}}[/tex]

= [tex]20.971 \ Hz[/tex]

Learn more:

https://brainly.com/question/14618870

a)

i) Potential for r < a: [tex]V(r)=\frac{\lambda}{2\pi \epsilon_0} ln(\frac{b}{a})[/tex]

ii) Potential for a < r < b:  [tex]V(r)=\frac{\lambda}{2\pi \epsilon_0} ln\frac{b}{r}[/tex]

iii) Potential for r > b: [tex]V(r)=0[/tex]

b) Potential difference between the two cylinders: [tex]V_{ab}=\frac{\lambda}{2\pi \epsilon_0} ln(\frac{b}{a})[/tex]

c) Electric field between the two cylinders: [tex]E=\frac{\lambda}{2\pi \epsilon_0} \frac{1}{r}[/tex]

Explanation:

a)

Here we want to calculate the potential for r < a.

Before calculating the potential, we have to keep in mind that the electric field outside an infinite wire or an infinite cylinder uniformly charged is

[tex]E=\frac{\lambda}{2\pi \epsilon_0 r}[/tex]

where

[tex]\lambda[/tex] is the linear charge density

r is the distance from the wire/surface of the cylinder

By integration, we find an expression for the electric potential at a distance of r:

[tex]V(r) =\int Edr = \frac{\lambda}{2\pi \epsilon_0} ln(r)[/tex]

Inside the cylinder, however, the electric field is zero, because the charge contained by the Gaussian surface is zero:

[tex]E=0[/tex]

So the potential where the electric field is zero is constant:

[tex]V=const.[/tex]

iii) We start by evaluating the potential in the region r > b. Here, the net electric field is zero, because the Gaussian surface of radius r here contains a positive charge density [tex]+\lambda[/tex] and an equal negative charge density [tex]-\lambda[/tex]. Therefore, the net charge is zero, so the electric field is zero.

This means that the electric potential is constant, so we can write:

[tex]\Delta V= V(r) - V(b) = 0\\\rightarrow V(r)=V(b)[/tex]

However, we know that the potential at b is zero, so

[tex]V(r)=V(b)=0[/tex]

ii) The electric field in the region a < r < b instead it is given only by the positive charge [tex]+\lambda[/tex] distributed over the surface of the inner cylinder of radius a, therefore it is

[tex]E=\frac{\lambda}{2\pi r \epsilon_0}[/tex]

And so the potential in this region is given by:

[tex]V(r)=\int\limits^b_r {Edr} = \frac{\lambda}{2\pi \epsilon_0} (ln(b)-ln(r))=\frac{\lambda}{2\pi \epsilon_0} ln\frac{b}{r}[/tex] (1)

i) Finally, the electric field in the region r < a is zero, because the charge contained in this region is zero (we are inside the surface of the inner cylinder of radius a):

E = 0

This means that the potential in this region remains constant, and it is equal to the potential at the surface of the inner cylinder, so calculated at r = a, which can be calculated by substituting r = a into expression (1):

[tex]V(a)=\frac{\lambda}{2\pi \epsilon_0} ln(\frac{b}{a})[/tex]

And so, for r<a,

[tex]V(r)=\frac{\lambda}{2\pi \epsilon_0} ln(\frac{b}{a})[/tex]

b)

Here we want to calculate the potential difference between the surface of the inner cylinder and the surface of the outer cylinder.

We have:

- Potential at the surface of the inner cylinder:

[tex]V(a)=\frac{\lambda}{2\pi \epsilon_0} ln(\frac{b}{a})[/tex]

- Potential at the surface of the outer cylinder:

[tex]V(b)=0[/tex]

Therefore, the potential difference is simply equal to

[tex]V_{ab}=V(a)-V(b)=\frac{\lambda}{2\pi \epsilon_0} ln(\frac{b}{a})[/tex]

c)

Here we want to find the magnitude of the electric field between the two cylinders.

The expression for the electric potential between the cylinders is

[tex]V(r)=\int\limits^b_r {Edr} = \frac{\lambda}{2\pi \epsilon_0} (ln(b)-ln(r))=\frac{\lambda}{2\pi \epsilon_0} ln\frac{b}{r}[/tex]

The electric field is just the derivative of the electric potential:

[tex]E=-\frac{dV}{dr}[/tex]

so we can find it by integrating the expression for the electric potential. We find:

[tex]E=-\frac{d}{dr}(\frac{\lambda}{2\pi \epsilon_0} (ln(b)-ln(r))=\frac{\lambda}{2\pi \epsilon_0} \frac{1}{r}[/tex]

So, this is the expression of the electric field between the two cylinders.

Learn more about electric fields:

brainly.com/question/8960054

brainly.com/question/4273177

#LearnwithBrainly

Answer:

8.64 seconds

Explanation:

According to the question

[tex]10^{10}\ years=1\ day[/tex]

[tex]1\ year=\dfrac{1}{10^{10}}\ day[/tex]

Humans have lived for [tex]10^6[/tex] years

In one universe day

[tex]10^6\ years=10^6\times \dfrac{1}{10^{10}}=10^{-4}\ day[/tex]

In seconds

[tex]10^{-4}\times 24\times 60\times 60=8.64\ seconds[/tex]

In one universe day humans have lived for 8.64 seconds

Humans have been around for 8.64 'universe seconds'.

The question asks for a conversion of human existence into 'universe seconds' given that humans have been around for approximately 106 years and the universe is approximately 10^10 years old. To answer this, one must conceptualise a 'universe day' as representing the entire 10^10 years of the universe's existence and break it down into 'universe seconds' in the same way that a normal day is broken down into normal seconds.

A regular day has 86,400 seconds (24 hours × 60 minutes per hour × 60 seconds per minute). As humans have existed for 10^6 years in the context of the universe's 10^10 years, we can calculate the fraction of the universe's existence that humans have been present for:

Human existence fraction = (Human years) / (Universe years) = 10^6 / 10^10 = 1 / 10^4

Now, we multiply this fraction by the total number of seconds in a day to find the equivalent 'universe seconds' of human existence:

Universe seconds of human existence = 1 / 10^4 × 86,400

Universe seconds of human existence = 8.64

Therefore, humans have existed for 8.64 'universe seconds' when defining the age of the universe as 1 'universe day'.

When a bungee cord is stretched a distance x, it exerts an opposing force given by the formula F = bx2. Integrated over the distance of stretch, this results in a work done of 2 Joules for a stretch distance of 1 meter and force constant b = 6 N/m^2.

The work done in stretching an elastic object like a bungee cord is given by the integral of the force over the distance of stretch. Given the force exerted by the bungee cord is F = bx^2, where b = 6 N/m^2 and the work W is defined as the integral from 0 to x of F dx, the formula to calculate work done becomes W = ∫from 0 to 1 (bx^2) dx. Solving this integral gives W = (b/3)x^3 evaluated from 0 to 1, which simplifies to W = (6/3) (1) = 2 Joules. So, the correct answer is 2 Joules.

https://brainly.com/question/13090442

#SPJ12

Answer:

qU = Ek = ½mv²

6.00 * 10^-7  * 3000 = ½ * 0.0026 * v²

v² = 0.7222167

v = 0.8498 m/s

Answer : The velocity of an electron is, [tex]6.1\times 10^{6}m/s[/tex]

Explanation :

According to de-Broglie, the expression for wavelength is,

[tex]\lambda=\frac{h}{p}[/tex]

and,

[tex]p=mv[/tex]

where,  

p = momentum, m = mass, v = velocity

So, the formula will be:

[tex]\lambda=\frac{h}{mv}[/tex]       .............(1)

where,

h = Planck's constant = [tex]6.626\times 10^{-34}Js[/tex]

[tex]\lambda[/tex] = wavelength  = [tex]1.2\times 10^{-10}m[/tex]

m = mass  of electron = [tex]9.11\times 10^{-31}kg[/tex]

v = velocity of electron = ?

Now put all the given values in formula 1, we get:

[tex]1.2\times 10^{-10}m=\frac{6.626\times 10^{-34}Js}{(9.11\times 10^{-31}kg)\times v}[/tex]

[tex]v=6.1\times 10^{6}m/s[/tex]

Thus, the velocity of an electron is, [tex]6.1\times 10^{6}m/s[/tex]

4. KE increases by a factor of 16 is the answer

Explanation:

Kinetic energy  = (1/2)mv² = 0.5 mv²

where  

m  = mass, and  v = velocity.

So at 15 mph,  

K E =  0.5 m  (15) ² = 112.5 m

And at 60 mph,  

K E = 0.5 m (60)² = 1800 m

m  is the mass, and not meters.

So, 1800  m/112. 5 m = 16

16 times the Kinetic Energy.

Answer:

348.57 kg

Explanation:

From the law of conservation of momentum,

Total momentum before the small child was picked = Total momentum after the small child was picked

mu + m'u' = V(m+m')................... Equation 1

Where m = mass of the skater, u = initial velocity of the skater, m' = mass of the small child, u' = initial velocity of the small child, V = common velocity after the child was picked.

Note: Assuming the small child was stationary before he was picked, the u' = 0 m/s.

making m' the subject of the equation

m' = (mu-mV)/V........................... Equation 2

Given: m = 80 kg, u = 6 m/s, V = 1.12 m/s.

Substitute into equation 2

m' = [(80×6)-(80×1.12)]/1.12

m' = (480-89.6)/1.12

m' = 390.4/1.12

m' = 348.57 kg.

Thus the mass of the small child = 348.57 kg

Answer:

kinetic frictional force opposes the relative motion between the surfaces in contact of the book and the table.

Explanation:

Final answer:

After deploying the parachute, a skydiver does experience nonzero acceleration as the increased drag causes rapid deceleration until reaching a new lower terminal velocity.

Explanation:

Immediately after deploying her parachute, a skydiver does indeed have a nonzero acceleration. When a parachute opens, it rapidly increases the area exposed to air resistance, causing a significant increase in drag. As a result, the force of air resistance acting on the skydiver greatly exceeds the force of gravity, which causes a rapid deceleration of the skydiver. The magnitude of this deceleration is determined by the net force acting on the skydiver, which now includes the strong opposing force from the parachute's drag. This deceleration continues until the skydiver reaches a new, much lower terminal velocity with the parachute open.

Answer: d= 0.57* l

Explanation:

We need to check that before ladder slips the length of ladder the painter can climb.

So we need to satisfy the equilibrium conditions.

So for ∑Fx=0, ∑Fy=0 and ∑M=0

We have,

At the base of ladder, two components N₁ acting vertical and f₁ acting horizontal

At the top of ladder, N₂ acting horizontal

And Between somewhere we have the weight of painter acting downward equal to= mg

So, we have N₁=mg

and also mg*d*cosФ= N₂*l*sin∅

So,

d=[tex]\frac{N2}{mg}*l[/tex] * tan∅

Also, we have f₁=N₂

As f₁= чN₁

So f₁= 0.357 * 69.1 * 9.8

f₁= 241.75

Putting in d equation, we have

d= [tex]\frac{241.75}{69.1*9.8} *l[/tex] * tan 58

d= 0.57* l

So painter can be along the 57% of length before the ladder begins to slip

Answer:

The weight of the ladder is given as well as the length ;  l = 11.9 m long and weighing W = 46.1 N rests against a smooth vertical wall.

how far along the length of the ladder = x = 4.14m

Explanation:

The detailed step and calculation is as shown in the attached file.

Answer: a) 12.9 m b) 0.40 rad/s² c) 335.4 J d) 1349.06 J

Explanation:

a)

Distance traveled= R∅

where ∅= [tex]\frac{(2\pi )^2 }{(2.8)^2}[/tex] / 2*α

To find α we have

Sum of torque= Iα

F x r x number of children = m*r²/2 * α

26 x [tex]\frac{4.1}{2}[/tex] * 4 = (255) * (4.10/2)² /2 *α

Solving we get,

α= [tex]\frac{213.2}{535.82}[/tex]

α= 0.40

So,

∅= [tex]\frac{(2\pi )^2 }{(2.8)^2}[/tex] / 2*α

Becomes

∅= 6.29

Now,

Distance traveled= 4.1/2 * 6.29

Distance traveled= 12.9 m

b)

Angular acceleration= 0.40

c)

Work done= F x distance traveled

Work done= 26 x 12.9

Work done= 335.4 J

d)

Kinetic energy= [tex]\frac{1}{2}* I * (\frac{2\pi }{2.8})^2[/tex]

Putting values we get,

Kinetic energy= 267.91 * 5.03

Kinetic energy= 1349.06 J

The merry-go-round problem involves calculating the distance each child runs, the angular acceleration, the work done by each child, and the kinetic energy of the system, using principles of rotational dynamics and energy.

We are given a merry-go-round scenario with children exerting force to set it in motion. Let's break down the problem step by step.

(a) Distance run by each child:

(b) Angular acceleration:

(c) Work done by each child:

(d) Kinetic energy of the merry-go-round:

Answer:

40 seconds

Explanation:

Thrusting speed = V

Where V=at

a= F/m

Therefore V = Ft/m

F = 1200kN = 1200000N

t = 20s

m = 8.0 * 104 kg

V = 1200000 * 20 / 80000

V = 300m/s

Time for the spaceship to coast a distance of 12km

Distance = Vt

t = 12000/300 = 40seconds

The time taken for taking the  spaceship to coast this distance is 40 seconds

Thrusting speed = V

Where

V=at

And,  

[tex]a= F\div m[/tex]

Therefore [tex]V = Ft\div m[/tex]

Now  

F = 1200kN

= 1200000N

t = 20s

[tex]m = 8.0 \times 104 kg[/tex]

Now  

[tex]V = 1200000 \times 20 \div 80000[/tex]

V = 300m/s

Time for the spaceship to coast a distance of 12km

Distance = Vt

[tex]t = 12000\div 300[/tex]

= 40seconds

Learn more: brainly.com/question/16911495

Answer:

Case A: - x axis

Case B: - x axis

Case C: no force as the direction of v and B are parallel.

Explanation:

Solution:

- The direction of Force exerted by the magnetic field B with a moving charge q with a velocity of v is given by an expression:

                                     F = q*(v x B)

- Where F: force vector exerted by the field

             v: velocity vector of charged particle q.

             B: magnetic field direction

- The cross product of v with B:

       We will use right hand rule in which our fingers curl from v to B, the direction of the thumb denotes the direction of applied force. Hence,

                                Case A: - x axis

                                Case B: - x axis

                                Case C: no force as the direction of v and B are parallel.

Final answer:

The direction of the magnetic force on a positively charged particle moving through a uniform magnetic field is determined by the right-hand rule 1 (RHR-1). The force is perpendicular to the plane formed by the particle's velocity and the magnetic field. The direction of the force depends on the charge of the particle and is opposite for positive and negative charges.

Explanation:

The direction of the magnetic force on a positively charged particle moving through a uniform magnetic field is determined by the right-hand rule 1 (RHR-1). According to RHR-1, if you point your right thumb in the direction of the particle's velocity (v) and your right fingers in the direction of the magnetic field (B), then your right palm will point in the direction of the magnetic force (F) acting on the particle.

For example, if the particle is moving perpendicular to the magnetic field (B), as shown in the figure, and the particle has a positive charge, then the force (F) will be directed outward from the plane formed by v and B.

It's important to note that the direction of the magnetic force on a negatively charged particle will be in the opposite direction to that on a positively charged particle.