Neutron capture reactions.
ExplanationIsotopes of the same element have the same number of protons in each nucleus. However, their nucleus differ in the number of neutrons. Adding one or more neutrons to a nucleus will converts it to a different isotope of the same element.
Neutrons can be produced with a particle accelerator. The researcher might aim fast moving alpha particles [tex]\phantom{}_2^{4}\text{He}[/tex] from the accelerator at a beryllium Be target.
[tex]\phantom{}_4^{9} \text{Be} + \phantom{}_2^4\text{He} \to \phantom{}_{\phantom{1}6}^{12}\text{C} + \phantom{}_{0}^{1} \text{n}[/tex]
Doing so will convert beryllium-9 to carbon-12 and release one neutron.
The neutron produced in this process moves very fast ("fast neutrons"). It might knock protons or alpha particles off the target nucleus. This is undesirable since the nucleus will have a change in its proton number. It will end up belonging to a different element.
The researcher should reduce the speed of those neutrons. Passing neutrons through moderators greatly reduces their speed. Moderators are materials that are rich in light nuclei. They remove the energy of neutrons as the two collide. Examples of moderators are heavy water (D₂O) and graphite (carbon). Slow neutrons are easier to capture than fast-moving ones. Combining those slow-moving neutrons to the source isotope will likely produce a different isotope of the same element.
ReferenceVitz, Ed. et. al, "19.5: Neutron Bombardment", ChemPRIME (Moore et al.), Libretexts Chemistry, 2017
Answer:
D. BY ADDING OR REMOVING NEUTRONS.
Hope this helps!
Explanation:
Why is energy required to remove an electron from an atom?
Electrons in an atom are held there by the force of attraction exerted by the positive charge of the nucleus on the negative charge of the electron. Energy is required to remove an electron from atom to overcome this attractive force.
Ethanol (c2h5oh) melts at -114°c. the enthalpy of fusion is 5.02 kj/mol. the specific heats of solid and liquid ethanol are 0.97 j/gk and 2.3 j/gk, respectively. how much heat (kj) is needed to convert 25.0 g of solid ethanol at -135°c to liquid ethanol at -50°c?
Melting point of ethanol = -114°c
Enthalpy of fusion = 5.02KJ/mol
Specific heat of solid ethanol = 0.97J/gk
specific heat of liquid ethanol = 2.3 j/gk.
mass of ethanol = 25.0g
moles of ethanol = mass/Molar mass = 25.0/46.07 = 0.543 moles
step 1:
solid ethanol at -135 C changing to solid ethanol at -114 C
Q1 = mass x specific heat of solid ethanol x change in Temperature
= 25.0 x 0.97 x [-114 - (-135)]
= 25.0 x 0.97 x [-114+135]
= 25.0 x 0.97 x 21
Q1 = 509.25 J
Step 2: solid ethanol at -114 C is changing to liquid ethanol at -114 C
Q2 = moles x deltaHfusion
= 0.543 x 5.02 KJ
= 2.72586 x 1000 J
Q2 = 2725.86 J
Step 3: liquid ethanol at -114 C is changing to liquid ethanol at -50 C
Q3 = mass x specific heat of liquid ethanol x change in T
= 25.0 x 2.3 x [-50 -(-114)]
= 25.0 x 2.3 x [-50+114]
= 25.0 x 2.3 x 64
Q3 = 3680J
Total heat = Q1 + Q2 + Q3
= 509.25 + 2725.86 + 3680
= 6915.11 J
Total heat = 6.915 KJ
Total heat required to convert 25.0g of solid ethanol at -135 C to liquid ethanol at -50 C is 6.9KJ.
To convert 25.0 g of solid ethanol at -135°C to liquid ethanol at -50°C, the heat required can be calculated through three main steps: heating solid ethanol to its melting point (-114°C), melting the solid ethanol to liquid form, and heating this liquid from -114°C to -50°C. With calculated heat for all three steps, the total heat required comes out to 6.913 kJ.
Explanation:The calculation for this problem is divided into three parts: heating the solid ethanol from -135°C to its melting point (-114°C), melting the solid ethanol at -114°C to liquid ethanol, and finally heating the liquid ethanol from -114°C to -50°C.
Step 1 - Heating solid ethanol to its melting point: The heat required for this can be calculated using the formula q=m*CΔT, where m is the mass of the ethanol, C is the specific heat, and ΔT is the change in temperature. The calculation is q=(25.0 g)*(0.97 J/g°C)*(-114°--135°) which equals 507.75 J, or 0.50775 kJ.
Step 2 - Melting solid ethanol to liquid ethanol: We use the given enthalpy of fusion of ethanol 5.02 kJ/mol. However, first, we need to convert the mass of ethanol to moles, which gives us 0.542 moles. Therefore, the total heat for this step will be (0.542 mol)*(5.02 kJ/mol) = 2.72 kJ.
Step 3 - Heating liquid ethanol from -114°C to -50°C: We use the same q=m*CΔT formula, replacing C with the specific heat of liquid ethanol. The calculation becomes q=(25.0 g)*(2.3 J/g°C)*(-50°--114°) which gives us 3,685 J or 3.685 kJ.
In total, the heat required is the sum of the heat from all three steps: 0.50775 kJ + 2.72 kJ + 3.685 kJ = 6.913 kJ.
Learn more about Solid Ethanol here:https://brainly.com/question/7960529
#SPJ3
Determine the value for the following reaction.
2HI(g) + 2.4 kcal → H2(g) + l2(g)
ΔH = _____
2.4 kcal
-2.4 kcal
0.0024 kcal
-0.0024 kcal
Answer:
ΔH = + 2.4 kcal
Step-by-step explanation:
2HI(g) + 2.4 kcal ⇌ H₂(g) + I₂(g)
Energy is on the left-hand side of the equation, so it is being absorbed by the system.
The thermodynamic convention is that energy going into a system is positive. Thus,
ΔH = + 2.4 kcal
Answer: 2.4 kcal
Explanation:
Endothermic reactions are defined as the reactions in which energy of the product is greater than the energy of the reactants. The total energy is absorbed in the form of heat and [tex]\Delta H[/tex] for the reaction comes out to be positive.
For the given reaction:
[tex]2HI+2.4kcal\rightarrow H_2(g)+I_2(g)[/tex]
Enthalpy change is the net heat absorbed or released during a chemical reaction.
As heat is added to reactants, energy is being absorbed and thus enthalpy for the reaction will be positive and the value will be +2.4 kcal.
If an element in a chemical reaction loses electrons, which of the following describes what happens to that element?
A. It is combusted
B. It is reduced
C. It is rusted
D. It is oxidized
Answer : The correct option is, (D) it is oxidized.
Explanation :
On the basis of electrons, there are two types of reactions :
(1) Oxidation reaction (2) Reduction reaction
Oxidation reaction : When an element loses electrons in a chemical reaction then that element gets oxidized in the chemical reaction and its oxidation number increases.
Reduction reaction : When an element gains electrons in a chemical reaction then that element gets reduced in the chemical reaction and its oxidation number decreases.
Hence, the correct answer is (D).
the equation below shows the decomposition of lead nitrate. how many grams of oxygen are produced when 11.5g NO2 is formed?
2Pb(NO3)2(s) -> 2PbO(s) + 4NO2(g) + O2(g)
Answer: 2 g
Explanation: [tex]2Pb(NO_3)_2(s)\rightarrow 2PbO(s)+4NO_2(g)+O_2(g)[/tex]
As can be seen from the balanced chemical equation, 2 moles of lead nitrate produce 4 moles of nitrogen dioxide.
[tex]2\times 331.2g=662.4g[/tex] of lead nitrate produces [tex]4\times 46=184g[/tex] of nitrogen dioxide.
184 g of nitrogen dioxide will be produced by 662.4 g of lead nitrate
So 11.5 g of nitrogen dioxide will be produced by=[tex]\frac{662.4}{184}\times {11.5}=41.4 g[/tex] of lead nitrate
As can be seen from the balanced chemical equation, 2 moles of lead nitrate produce 1 mole of oxygen.
[tex]2\times 331.2g=662.4g[/tex] of lead nitrate produces 32 g of oxygen.
41.4 g of lead nitrate produces =[tex]\frac{32}{662.4}\times {41.4}=2g[/tex] of oxygen.
Give the correct thermochemical equations for a (cacl2+h2o) pack and (nh4no3+h2o) pack.
In a pack of CaCl2 and H2O, hydrolysis of Ca+2 will occur
This will result in formation of Ca(OH)2.
The reaction is exothermic in nature
so the balanced thermo-chemical equation will be
CaCl2(aq) + H2O (l) ---> Ca(OH)2 + 2HCl + Heat
In a pack of NH4NO3 and H2O hydrolysis of NH4+ will occur as
NH4NO3 (aq) + H2O(l) + Heat ---> NH4OH(aq) + HNO3 (aq)
It is an endothermic reaction
How many grams of carbon monoxide are needed to react with an excess of iron (III) oxide to produce 198.5 grams of iron? Fe2O3(s) + 3CO(g) -----> 3CO2(g) + 2Fe(s) Show all work step by step please!
Fe2O3(s) + 3CO(g) -----> 3CO2(g) + 2Fe(s)
mass of iron = 198.5 g of iron
atomic mass of iron = 55.845g/mol
moles of iron = mass/Atomic mass
= 198.5g/55.845
= 3.5545 moles Fe
moles of carbon monoxide
= 3.5545 moles Fe x 3 moles CO
2 moles Fe
= 5.3317 moles CO
molar mass of CO = 12.01 + 16 = 28.01g/mol
mass of carbon monoxide reacted
= moles x molar mass
= 5.3317 x 28.01
= 149.34g
grams of carbon monoxide needed to react with an excess of iron(II)oxide to produce 198.5g of iron is 149.34g CO
Which of the following is equal to the number of particles in 36 grams of carbon-12?
B. 3 moles
A. 3:1 molar mass
C. 3:1 mole ratio
D. 1:3 molar volume
The quick answer is B
3 moles
A mole has an alternate definition of 6.02 * 10^23 particles or atoms (in this case) that make it up.
A is possible, but it is not the question.
C is possible, but it is not the question.
I've never directly seen D before. It is used with gases (indirectly).
You mix 145 grams of water with 200 grams of ethanol to make a solution. What is the solute and what is the solvent?
The greater amount is the solvent and the lesser amount is the solute.
Hence ethanol(200g) which is the greater amount is the solvent here.
And water (145g) which is lesser is the solute here.
Which explanation best compares the movement of particles in the three states of matter? A. Particles in a gas can only vibrate. In a solid, they slide against each other. In a liquid, they move freely, bouncing and bumping into each other. B. Particles in a solid can only vibrate. In a liquid, they slide against each other. In a gas, they move freely, bouncing and bumping into each other. C. Particles in a liquid can only vibrate. In a gas, they slide against each other. In a solid, they move freely, bouncing and bumping into each other. D. Particles in a solid can only vibrate. In a gas, they slide against each other. In a liquid, they move freely, bouncing and bumping into each other. E. Particles in a liquid can only vibrate. In a solid, they slide against each other. In a gas they move freely, bouncing and bumping into each other.
Answer:
e
Explanation:
how did quantum mechanics change our understanding of atoms?
A. in quantum mechanics, electrons exist in a cloud-shaped area outside the nucleus.
B. in quantum mechanics, photons exist in a cloud-shaped area outside the nucleus.
C. in quantum mechanics, photons are a part of the nucleus along with electrons.
D. in quantum mechanics, photons are a part of the nucleus along with protons.
Answer:
The correct answer is option A.
Explanation:
Schrodinger proposed the mechanic model of atom in which he defined the location of electrons inside an atom by electron cloud in 3-d space. And in order to locate them he introduced the concept of quantum numbers.
Where as photons are the discrete packet or bundle of energy related to electromagnetic radiations.
A non-native organism that is released into a new ecosystem, such as Kudzu in the southeastern United States is called a
A) pioneer species.
B) threatened species.
C) endangered species.
D) non-indigenous species.
Answer is: D) non-indigenous species.
Non-indigenous species or an introduced species is a species living outside its native area, but which has arrived there by human activity, either deliberate or accidental.
Kudzu (Japanese arrowroot) was introduced from Japan into the United States at the Japanese pavilion in the 1876 Centennial Exposition in Philadelphia.
The United States Forest Service estimated the rate of spreading of plant Kudzu to be 2500 acres per year.
Answer:
D. non-indigenous species.
Explanation:
The molarity (M) of an aqueous solution containing 15.6 g of sucrose, C12H22O11, in 65.5 mL of solution is:
6.96 x 10–4 M.
2.47 x 10–2 M.
0.696 M.
1.33 M.
the molecularity of C12H22O11 is = 12x12+22x1+16x11 = 342 g/mol
molarity (M) = moles / V. solution
moles = mass / 342 = 15,6/342 = 0,0456 moles
=> molarity (M) = 0,0456/0,0655 = 0,696 M
To find the molarity of a solution, convert the mass of the solute to moles, convert the volume of the solution to liters, and divide the number of moles by the volume in liters. The molarity of a solution containing 15.6 g of sucrose in 65.5 mL of solution is 0.696 M.
Explanation:The molarity (M) of a solution is calculated using the formula M = mol/L, where mol represents the number of moles of the solute and L represents the volume of the solution in liters. First, we must convert the mass of sucrose to moles. Sucrose, C12H22O11, has a molar mass of approximately 342.3 g/mol. Therefore, 15.6 g / 342.3 g/mol = 0.0456 mol. Next, we convert the volume of the solution to liters: 65.5 mL = 0.0655 L. Finally, we can calculate the molarity of the solution: M = 0.0456 mol / 0.0655 L = 0.696 M. Therefore, the correct answer is 0.696 M.
Learn more about Molarity Calculation here:https://brainly.com/question/15948514
#SPJ11
Balance the equation with the correct coefficients __KCIO3 -> __KCI + ___O2
Answer: The balanced chemical reactions:
[tex]2KClO_3\rightarrow 2KCl+3O_2[/tex]
Explanation:
[tex]aKClO_3\rightarrow bKCl+cO_2[/tex]
The given reaction is an unbalanced reaction
Let 'a','b' and 'c' be the coefficient of [tex]KClO_3, KCl \text{ and } O_2[/tex] respectively.
So, in order to balance this given chemical equation:
a = 2, b = 2, c = 3
[tex]2KClO_3\rightarrow 2KCl+3O_2[/tex]
Answer:
2
2
3
in that order
Explanation:
Which compound is held together by ionic bonds?
A. S02
B. H20
C. CaCl2
D. CH4
Answer is: C. CaCl2.
Name of this chemical compounds is calcium chloride.
Calcium chloride is a inorganic salt with ionic bonds between calcium and chlorine.
It is a colorless crystalline solid at room temperature, highly soluble in water.
Calcium form cation with positive charge 2+ and chlorine form anion with negative charge 1-.
Electron configuration of calcium atom: ₂₀Ca 1s² 2s² 2p⁶ 3s² 3p⁶ 4s².
Atomic number of calcium is 20, it means that it has 20 protons and 20 electrons, so atom of calcium is neutral.
When calcium lost two electrons, it will have 20 protons (positive charge) and 18 electrons (negative charge), which means it has two protons more and it has +2 oxidation number.
How do you think bubbles affect sound in the global ocean?
Final answer:
Bubbles in the ocean alter sound propagation by scattering and absorbing sound, which affects acoustic communication and the operation of sonar. Increased bubbles from thermal pollution can also decrease dissolved oxygen levels, impacting marine life.
Explanation:
The presence of bubbles in the global ocean can significantly affect sound propagation. Bubbles can scatter and absorb sound, altering its speed and direction. Consequently, this can influence acoustic communication and the effectiveness of sonar systems used by marine animals and humans for navigation, communication, and detection. For instance, dolphins rely on echolocation to navigate and hunt in the ocean, and bubbles can disrupt the transmission of these sound waves. Additionally, in areas with a high bubble content due to thermal pollution or natural gas seepage, sound may not travel as predictably, which could have navigational implications for sea life and technological systems.
Another aspect where bubbles can play a role is during thermal pollution events, where the solubility of gases in water decreases as the water temperature increases. This leads to the formation of more bubbles, which can reduce the amount of dissolved oxygen in the water, critically affecting marine life. Moreover, sonar technology, which relies heavily on the transmission of sound for detecting objects underwater, can be affected by the presence of bubbles as they change the medium through which sound waves travel. This can make the sonar less precise or reliable.
Ce procent de impuritati contine un minereu de siderit, daca din 1500kg minereu s-au obtinut 700kg fier 90% ?
FeCO3 ==> Fe + produsi minoritari.
m Fe impur= 700 kg
puritatea (p) = masa pura (mp)/ masa impura (mi) x 100
mp= p x mi / 100 sau mp = p/100 x mi => mp Fe = 90/100 x 700 = 630 kg Fe pur.
M FeCO3= 115.85 kg/kmol
115.85 kg FeCO3 .... 55.85 kg Fe
x kg FeCO3 ........630 kg Fe
x= 630 * 115.85 /55.85 = 1306.81 kg FeCO3 (mp in formula puritatii)
p=mp/mi x 100
mi FeCO3 = 1500 kg
mp FeCO3=1306.81 kg
p=1306.81 / 1500 x 100 = 87.12% puritate Siderit
How has the discovery and usage of the periodic table benefited society?
Select all that apply.
It has enabled scientists to communicate chemical discoveries and results more easily.
It has increased scientists' ability to determine how cations and anions form covalent bonds.
It has increased scientists' ability to predict and discover new elements.
It has led to increased knowledge and usage of elements in technological innovations.
Final answer:
The discovery and usage of the periodic table has benefited society by enabling easy communication of chemical discoveries, predicting and discovering new elements, and driving technological innovations.
Explanation:
The discovery and usage of the periodic table has benefited society in several ways:
It has enabled scientists to communicate chemical discoveries and results more easily. The organized structure of the periodic table allows for efficient sharing of information between researchers.It has increased scientists' ability to predict and discover new elements. By identifying the patterns and trends in the periodic table, scientists can make educated guesses about the existence and properties of elements that have not yet been discovered or synthesized.It has led to increased knowledge and usage of elements in technological innovations. The periodic table provides a framework for understanding the behavior of different elements, allowing scientists to develop new materials and technologies.A 0.1326 g sample of magnesium was burned in an oxygen bomb calorimeter. the total heat capacity of the calorimeter plus water was 5,760 j/°c. if the temperature rise of the calorimeter with water was 0.570°c, calculate the enthalpy of combustion of magnesium. mg(s) + 1/2o2(g) →mgo(s)
The enthalpy of combustion of magnesium is -601.3 kj/mol
calculation
ΔH = cΔT
C( heat capacity) =5,760 j/°c
ΔT = 0.570°c
ΔH = 5760 j/°c x 0.570 °c = 3283.2 j
convert 3283.2 j into Kj
1 kj = 1000 j
kj ? =3283.2 j
by cross multiplication
={ (3283.2 j x 1 kj) / 1000 j} =3.2832 kj
Find the moles of Mg
moles = mass÷ molar mass
from periodic table the molar mass of Mg = 24.3 g/mol
= 0.1326 g÷ 24.3 g/mol =0.00546 moles
find ΔH in KJ/mol
= 3.2832 kj/ 0.00546 moles = 601.3 Kj/mol
since heat is released during combustion the ΔH is = - 601.3 kj/mol
Kevin has 5 fish in his fish tank jasmine has 4 times as many fish as Kevin.How many fish does jasmine have?
Do you think that the mole should be considered a base unit in the SI system? Explain why or why not.
The International System of Units (S.I.) is the modern form of the metric system, and is the most widely used system of measurement.
It comprises a coherent system of units of measurement built
- on seven base units, which are
(the ampere, kelvin, second, metre, kilogram, candela, mole)
- a set of twenty prefixes to the unit names and unit symbols that may be used when specifying multiples and fractions of the units.
The system also specifies names for 22 derived units, such as lumen and watt, for other common physical quantities.
So, the mole not should be .... is a base unit in the SI system
Yes, the mole should be considered as a base unit in the SI unit.
A mole is defined as the physical properties of the real object, the carbon atom. Therefore, it is a base unit.
Mole as a base unit in the SI systemA Mole is a base unit of substances in the international SI unit.It is defined as a collection of exactly 6.022140761023 elementary entities (particles), which can be atoms, molecules, ions, or electrons.Thus, the mole is considered as a base unit in the SI system, because it defined as physical properties of real objects.
Learn more about mole, here:
https://brainly.com/question/15209553
Complete the paragraph to describe the characteristics of silicon tetrachloride molecule (SiH4). the Lewis structure and the table of electronegativities are given.
The bond polarities of SiH4 are _____, the molecular shape is _____, and the molecule is _____.
Blank Options 1: Polar, Nonpolar
Blank Options 2: trigonal pyramidal, trigonal planar, tetrahedral, linear, bent
Blank Options 3: Polar, Nonpolar
Silicon tetrachloride (SiH4) is a covalent tetrahedral molecule with a trigonal pyramidal shape. It is nonpolar and has a low boiling point of 57 °C.
Explanation:Silicon tetrachloride (SiH4) is a covalent tetrahedral molecule with a trigonal pyramidal shape. The Lewis structure for SiH4 would show the silicon atom in the center with four chlorine atoms bonded to it. Each chlorine atom would have a lone pair of electrons, causing the molecule to have a trigonal pyramidal shape.
The electronegativity values of silicon and chlorine are 1.9 and 3.2 respectively, indicating a polar covalent bond between silicon and chlorine. However, due to the symmetry of the molecule, the dipole moments cancel each other out, resulting in a nonpolar molecule. Silicon tetrachloride is a colorless liquid with a low boiling point of 57 °C.
Learn more about Silicon tetrachloride here:https://brainly.com/question/24111044
#SPJ12
Silicon tetrahydride (SiH4) is a nonpolar molecule with a tetrahedral shape due to the central silicon atom being sp³ hybridized. Even though Si-H bonds are polar, the symmetry of the molecule results in a nonpolar overall molecule.
Explanation:The bond polarities of SiH4 are Nonpolar. SiH4, or Silicon tetrahydride, is a covalent molecule with tetrahedral structure, in which Silicon (Si) forms four single bonds with four Hydrogen (H) atoms. Central Silicon atom is sp³ hybridized, which results in a Tetrahedral molecular shape. Even though the Si-H bonds are polar because of the difference in electronegativities of Si and H, the bond dipoles cancel each other because of the molecule's symmetry, making the whole molecule Nonpolar.
Learn more about Silicon Tetrahydride here:
https://brainly.com/question/14657194
#SPJ12
Which statement about gases is true? A. They are made up of particles that always move very slowly. B. They are made up of particles that travel in a curved path when in motion. C. They are made up of hard spheres that vibrate quickly in stationary positions. D. They are made up of hard spheres that are in random motion.
Answer: D. They are made up of hard spheres that are in random motion.
Explanation:
A gas is a state of aggregation of matter in which, under certain conditions of temperature and pressure, its molecules interact weakly with each other, without forming molecular bonds, adopting the shape and volume of the container that contains them and tending to separate everything possible because of its high concentration of kinetic energy.
The molecules of a gas are practically free and have the ability to be distributed throughout the space in which they are contained because the gravitational forces and attraction between them are practically negligible compared to the speed at which they move. .
Therefore, gas molecules do not travel specific trajectories or vibrate in a stationary position, instead they move quickly and randomly through the entire space of the container that contains them.
The true statement about gases is that they are made up of hard spheres that are in random motion, which is option D.
Among the given options, statement D is true. Gases are composed of particles, such as atoms or molecules, that are in constant random motion. These particles move in straight lines until they collide with other particles or the walls of the container, where they undergo elastic collisions. The random motion of gas particles is responsible for their ability to fill the entire volume of the container and to exert pressure on the container walls.
Hence, the correct option is option d.
Learn more about gases here:
https://brainly.com/question/1369730
#SPJ 6
2. A sample of table sugar (sucrose, C12H22O11) has a mass of 1.202 g.
a. Calculate the number of moles of C12H22O11 contained in the sample
and record in Table 1. Show your work.
b. Calculate the moles of each element in C12H22O11 and record in Table
1. Show your work.
c. Calculate the number of atoms of each type in C12H22O11 and record in
Table 1. Show your work.
Please show your work and calulation. Thanks
Answer:
a) [tex]\text{no of moles}=\frac{\text{given mass}}{\text{Molecular mass}}[/tex]
[tex]\text{no of moles of sucrose}=\frac{1.202g}{342g/mol}=0.0035moles[/tex]
b) Moles of carbon in 1 mole of sucrose [tex]C_{12}H_{22}O_{11}[/tex]= 12 moles
Moles of carbon in 0.0035 moles of sucrose [tex]C_{12}H_{22}O_{11}=\frac{12}{1}\times 0.0035=0.042moles[/tex]
Moles of hydrogen in 1 mole of sucrose [tex]C_{12}H_{22}O_{11}[/tex]= 22 moles
Moles of hydrogen in 0.0035 moles of sucrose [tex]C_{12}H_{22}O_{11}=\frac{22}{1}\times 0.0035=0.077moles[/tex]
Moles of oxygen in 1 mole of sucrose [tex]C_12H_22O_11[/tex]= 11 moles
Moles of oxygen in 0.0035 moles of sucrose [tex]C_{12}H_{22}O_{11}=\frac{11}{1}\times 0.0035=0.042moles[/tex]
c) 1 mole of carbon contains [tex]=6.023\times 10^{23}atoms[/tex]
0.042 moles of carbon contain [tex]=\frac{6.023\times 10^{23}}{1}\times 0.042=0.25\times 10^{23}atoms[/tex]
1 mole of hydrogen contains [tex]=6.023\times 10^{23}atoms[/tex]
0.077 moles of hydrogen contain [tex]=\frac{6.023\times 10^{23}}{1}\times 0.077=0.46\times 10^{23}atoms[/tex]
1 mole of oxygen contains [tex]=6.023\times 10^{23}atoms[/tex]
0.042 moles of oxygen contain [tex]=\frac{6.023\times 10^{23}}{1}\times 0.042=0.25\times 10^{23}atoms[/tex]
A 110. ml solution of 0.340 m hcl(aq) is mixed with a solution of 330. ml of 0.150 m hno3(aq). the solution is then diluted to a final volume of 1.00 l. how many moles of h+ are present in the final solution?
The total number of moles of H+ in the mixed solution is 0.079 in the mixed volume of 0.4 L. Thus the number of moles in 1 l solution is 0.197.
What is molarity?Molarity of a solution is the ratio of number of moles to the volume of solution in liters. Molarity is a temperature dependant term. This is the most common concentration term.
Here, the number of moles in 110 ml of 0.340 M HCl is calculated as follows:
number of moles = molarity × volume
= 0.340 × 0.1 l
= 0.034 moles.
Number of moles in 330 ml of 0.15 m nitric acid is 0.3 × 0.15 = 0.045.
Total number of moles in the mixed solution = 0.034 + 0.045 = 0.079. This is the number of moles in the mixed solution of 0.4 L
Hence, the number of moles in 1 liter is 0.4 × 0.079 = 0.197 moles.
To find more on molarity, refer here:
https://brainly.com/question/2817451
#SPJ2
An electron and a proton attract each other as a result of _____ forces.
a. inertial
b. gravitational
c. compression
d. electromagnetic
The correct answer is D. Electromagnetic
Explanation:
Electron and protons are both subatomic particles that differ in their mass and other features including electromagnetic charges. Indeed, protons are positively charged, while electrons are negatively charged. This difference in electromagnetic charges causes electrons to be attracted to electrons, and vice versa due to electromagnetic forces as particles with different charges attract each other while those with the same charges repel each other. Thus, an electron and a proton attract each other as a result of electromagnetic forces.
You need to produce a buffer solution that has a pH of 5.40. You already have a solution that contains 10. mmol (millimoles) of acetic acid. How many millimoles of acetate (the conjugate base of acetic acid) will you need to add to this solution? The pKa of acetic acid is 4.74. Express your answer numerically in millimoles. View Available Hint(s)
Answer:
46. mmol
Step-by-step explanation:
The equation for the equilibrium is:
HA + H₂O ⇌ A⁻ + H₃O⁺
The solution is a buffer, so we can use the Henderson-Hasselbalch equation:
pH = pKa + log([A⁻]/[HA])
5.40 = 4.74 + log([A⁻]/(10.) Subtract 4.74 from each side
0.66 = log([A⁻]/(10.) Take the antilog of each dide
[A⁻]/10. = 10 ^0.66
[A⁻]/10. = 4.57 Multiply each side by 10.
[A⁻] = 46. mmol
You will add 46. mmol of sodium acetate.
The amount of acetate needed to add to the solution is ; 46 mmol
Given data:
pH of buffer solution = 5.4
volume of Solution ( H A ) = 10 mmol
pKa of acetic acid = 4.74
Given that the solution is a buffer solution we will apply Henderson-Hasselbalch equation:
pH = [tex]pKa + log ( [A^-] / [HA] )[/tex] -------- ( 1 )
Insert values into equation 1
[tex]5.40 = 4.74 + log([A^-]/(10 )[/tex]
0.66 = [tex]log([A^-]/(10.)[/tex] -------- ( 2 ) ( after subtracting pKa value from both side )
∴ [tex][A^-]/10. = 10^{0.66}[/tex] ----- ( 3 ) ( antilog )
Multiply both sides of equation 3 by 10
[tex][A^-] = 46 mmol[/tex].
Hence we can conclude that the amount of acetate needed to add to the solution is 46 mmol
Learn more : https://brainly.com/question/23570638
Which electrons in a calcium atom in the ground state have the greatest effect on the chemical properties of calcium
Answer is: the two electrons in the fourth shell.
Atomic number of calcium is 20, it means that it has 20 protons and 20 electrons, so atom of calcium is neutral.
Electron configuration of calcium atom: ₂₀Ca 1s² 2s² 2p⁶ 3s² 3p⁶ 4s²; calcium has two valence electrons (4s²).
In reactions it lose those two electrons ang form cation with positive charge 2+.
Atomic number is the number of protons, which is characteristic of a chemical element.
Beryllium, magnesium,calcium and strontium are alkaline earth metals. The elements have very similar properties.
Alkaline earth metals have in common an outer s- electron shell (two electrons).
Valence electrons have the greatest effect on the chemical properties of calcium
Further explanationElectrons can move the shell up or down by releasing energy or absorbing energy
Excited electrons show higher electron transfer to the shell by absorbing energy
So it can be concluded that there are 2 conditions:
Ground state is the state of electrons filling skins with the lowest energy levels.
Excited state is the state of electrons which occupies a higher energy level
The state of excited electrons can be seen from the presence of electrons which do not fill the skin completely but fill the skin afterwards
Ca has atomic number 20 so the electron configuration is:
1s² 2s² 2p⁶ 3s² 3p⁶ 4s²
This configuration can be said in Ground state conditions
Elemental properties can be determined by its valence electrons (electrons which fill electrons in the outer shell)
The valence electrons of an element indicate in what group and period the element is located in the periodic system so that its properties can be determined
The period of an element is determined from the valence shell (the biggest main quantum number (n) )
Groups of chemical elements are divided into two, namely:
Group A, occupying sub shell s and p
Group B, occupying sub shell d
If we look at valence electrons from Ca atoms then:
period = 4 group = 2ASo that the Ca Atom is located in the alkaline earth group, together with beryllium (Be), magnesium (Mg), strontium (Sr), barium (Ba), and radium (Ra)
So the chemical properties of calcium :
- forming bases - reactive - strong reducing agentLearn moreelement X
brainly.com/question/2572495
electrons and atomic orbitals
brainly.com/question/1832385
about subatomic particles statement
brainly.com/question/3176193
What is the name for the Fe2+ cation?
Iron ion
Iron (II) ion
Ironide
Ferride ion
Answer:
Iron (II) ion.
Explanation:
Fe²⁺ is a cation of ion that lost 2 electrons.It can be named as iron (II) ion.Iron is the name of the metal, and (II) means that it is the cation of Fe metal that lost 2 electrons.While Iron ion may be Fe²⁺ or Fe³⁺.So, the right choice is: iron (II) ion.
Answer:
The correct answer is the option: Iron (II) ion.
Explanation:
Hello! Let's solve this!
El Hierro (Fe) has two valence numbers. Fe + 2 and Fe +3.
The +2 and +3 indicate that iron lost two or three electrons respectively.
In this case the ion is Fe + 2, this cation is called the Iron (II) ion
We conclude that the correct answer is the option: Iron (II) ion.
Why is a bush or tree a more accurate then a line to describe how hominds developed into modern humans
The human “family tree” may be better described as a “family bush,” within which it is impossible to connect a full chronological series of species, leading to Homo sapiens, that experts can agree upon.