Answer:
Based on the information, the compound is a phospholipid.
Explanation:
Phospholipids are made up of a fatty acid tail which is hydrophobic in nature and a head which comprises of phosphates that is hydrophilic in nature. Hence, phospholipids are amphiphilic compounds so they will be partially soluble in water and will allow water-soluble substances to mix with fats.
Hence, the composition of the substance described in the question confirms that is a phospholipid. As it's structure contains hydrocarbon and phosphorus and might also contain nitrogen.
The chemical compound that is partially soluble in water and contains carbon, hydrogen, oxygen, nitrogen, and phosphorus atoms is likely a phospholipid. Phospholipids are essential components of cell membranes and play a crucial role in maintaining the structure and function of biological membranes.
Phospholipids consist of a hydrophilic (water-attracting) head and two hydrophobic (water-repelling) tails. The hydrophilic head typically contains a phosphate group, which contains both phosphorus and oxygen atoms. The hydrophobic tails are composed of fatty acid chains, consisting of carbon and hydrogen atoms.
The presence of nitrogen in the compound can be attributed to the amino group found in the phospholipid's structure. Phospholipids are amphipathic molecules, meaning they have both hydrophilic and hydrophobic regions, making them suitable for maintaining the solubility of water-soluble substances in fats. These molecules are essential for the formation of biological membranes, where they arrange themselves in bilayers with the hydrophilic heads facing the aqueous environment and the hydrophobic tails oriented inward, creating a stable barrier between aqueous compartments and nonpolar regions.
To learn more about compound, click here.
https://brainly.com/question/14117795
#SPJ3
Is it true that Organisms need water, vitamins and minerals. But they do not need salt to function.
Carbon monoxide is formed when fuels are burned:
with sulfur impurities
without enough oxygen
at high temperatures
that contain lead
Answer:
Without enough oxygen.
Step-by-step explanation:
In the presence of excess oxygen, the combustion of fuel produces carbon dioxide. For example, propane burns according to the equation
C₃H₈ + 5O₂ ⟶ 3CO₂ + 4H₂O
In the presence of a limited amount of oxygen, carbon monoxide is also formed.
C₃H₈ + ⁷/₂O₂ ⟶ 3CO + 4H₂O
The process is called incomplete combustion.
(a) is wrong. Sulfur impurities cause the formation of sulfur dioxide.
(c) is wrong. High temperatures usually lead to more complete combustion.
(d) is wrong. Lead compounds inhibit knocking in gasoline engines, but they do not affect the formation of carbon monoxide.
Which formula below is the correct combination when nitrogen and hydrogen bond covalently? A. N3H B. NH3 C. NH2 D. NH
N and H covalently bond to form the correct formula NH3.
A. N3H
B. NH3
C. NH2
D. NH
When the products of a reaction have more energy than the reactants:
the reaction is exothermic
the reaction is endothermic
the reactants gave up energy
the H is positive
In the equation: MgCl2 + Na3P --> write the chemical formula for the compound that will be formed that contains Mg
3MgCl2 + 2Na3P => Mg3P2 + 6NaCl
The reactants of two chemical equations are listed.
Equation 1: AgNO3 + Zn
Equation 2: AgNO3 + MgCl2
Based on the type of reaction, which reaction can be used to extract silver metal from silver nitrate solution?
Equation 1, because Zn being more reactive, replaces N from AgNO3
Equation 1, because Zn being more reactive, replaces Ag from AgNO3
Equation 2, because Mg being more reactive, exchanges position with Ag in AgNO3
Equation 2, because Mg being more reactive, exchanges position with N in AgNO3
Equation 1, because Zn being more reactive, replaces Ag from AgNO3
Zn being highly reactive can replace Ag from AgNO3 and produce Ag metal.
Equation 1: 2AgNO3(aq) + Zn(s) → 2Ag(s) + Zn(NO3)2
This equation is the right one to extract silver metal from silvernitrate solution as its single displacement reaction.
Answer:
Equation 1, because Zn being more reactive, replaces Ag from AgNO3
Explanation:
The preferential activity of one metal to displace the other in a chemical reaction can be deduced based on the reactivity or activity series.
The elements at the top of the series are highly reactive and can displace metals that fall below them. Both Zn and Mg appear above Ag in the reactivity series and can displace silver from silver nitrate.
1) AgNO3 + Zn → ZnNO3 + Ag
Metallic silver can be extracted through the above single displacement reaction.
2) 2AgNO3 + MgCl2 → 2AgCl + Mg(NO3)2
This is double displacement reaction which instead forms a precipitate of AgCl
Which description correctly identifies the cation, the anion, and the formula for the compound they create? A cation = Cl– anion = H+ formula = HCl B cation = Mg+ anion = Cl– formula = MgCl C cation = Na+ anion = Cl– formula = ClNa D cation = Ca+2 anion = Cl– formula = CaCl2
Answer: D
Cation: [tex]\text{Ca}^{2+}[/tex]Anion: [tex]\text{Cl}^{-}[/tex]Formula: CaCl₂ExplanationCations are ions that carry one or more positive charges. Anions are ions that carry one or more negative charges.Electrons have negative charges. Atoms are originally neutral. They turn positive and form cations when they lose electrons. They turn negative and form anions when they gain electrons.
The superscript next to an ion shows its charge. By convention, the size of the charge is written in front of the sign of the charge. For example, "[tex]1-[/tex]" indicates a negative charge of one. "[tex]2+[/tex]" indicates a positive charge of two.
The choices include only elements from the s block and the p block. They are main group elements. Charges of their ions can be predicted.
In case the name of the element ends in -ium. The element is likely to be a metal. It tends to lose electrons to form a cation. It will lose all its valence electrons in most cases. The number of valence electrons in a main group metal atom (1, 2, 3, etc.) is the same as the last digit of its IUPAC group number. As a result, that number will also be the charge of the ion that it forms.Otherwise, the element is likely to be a nonmetal. It seeks to have eight valence electrons. However, most nonmetals have less than that number. It tends to gain the missing electron or electrons. By doing so, it will form an anion. All of the known nonmetals are in the main group. Like metals from the main group, the number of valence electrons in a nonmetal atom (4, 5, 6, 7, or 8) is the same as the last digit of its IUPAC group number. Subtracting that number from eight will give the number of electrons added to the atom when it forms an anion. The result will also be the charge on the anion that it forms. For example, chlorine Cl has IUPAC group number 17. It has 7 valence electrons. [tex]8 - 1 = 7[/tex]. It will accept one extra electron. As a result, its anion [tex]\text{Cl}^{-}[/tex] will have a charge of -1. The rule above does not work for hydrogen H. An H atom has only one valence electron. It tends to lose that electron to form the [tex]\text{H}^{+}[/tex] ion, with a charge of +1.Also by convention, cations shall go in front of anions in a chemical formula. Their should balance the charge on each other. For example, [tex](+2) + 2 \times (-1) = 0[/tex]. Two ions of charge -1 would combine with one ion of charge +2 to form a neutral compound.
Choice A:
[tex]\text{Cl}^{-}[/tex] is an anion, not a cation.
Choice B:
Magnesium Mg is in IUPAC group 2. It has two valence electrons. It tends to lose both of them to form an [tex]\text{Mg}^{2+}[/tex] ion with a charge of +2. The [tex]\text{Mg}^{+}[/tex] ion with a charge of +1 might be too unstable to become part of an ionic compound.
Choice C:
[tex]\text{Na}^{+}[/tex] is a cation and has a positive charge. By convention, it should go in front of [tex]\text{Cl}^{-}[/tex], which is an anion and has a negative charge. The formula should be NaCl.
Choice D:
Calcium Ca is also in IUPAC group 2. Similar to Mg, it has two valence electrons and tends to form a [tex]\text{Ca}^{2+}[/tex] ion. Each [tex]\text{Ca}^{2+}[/tex] ion shall combine with two [tex]\text{Cl}^{-}[/tex] ions for their charges to balance. Hence the formula CaCl₂.
Option D is the correct choice. The cation is Ca+2, the anion is Cl-, and the compound they form is CaCl2, called Calcium chloride. The chemical formula is written such that the charges balance out.
Explanation:The correct choice that identifies the cation, the anion, and the formula for the compound they create correctly is Option D. The cation in this case is Ca+2 and the anion is Cl–. When these two combine, they form the compound CaCl2, also known as Calcium chloride. In a compound, the cation is always written first followed by the anion. The charges must balance out, hence for Ca+2 (Calcium) and Cl- (Chloride) to balance, two chloride ions are needed for every one calcium ion, hence the formula CaCl2.
Learn more about Chemical Compounds here:https://brainly.com/question/12166462
#SPJ3
Which of the following theories provides information concerning both molecular shape and molecular bonding?
A. molecular orbital theory
B. VSEPR theory
C. quantum mechanical theory
D. Bohr atomic theory
(Not D )
Final answer:
The VSEPR theory provides information about molecular shape and bonding by predicting electron pairs' arrangement around central atoms in a molecule. So the correct option is B.
Explanation:
The theory that provides information about both molecular shape and molecular bonding is the valence-shell electron-pair repulsion (VSEPR) theory. The VSEPR theory predicts the arrangement of electron pairs around each central atom and usually the correct arrangement of atoms in a molecule. This theory considers electron-pair repulsions to determine the geometry of the molecule, which is essential for understanding molecular bonding and shape.
To reconcile the geometries of s, p, and d atomic orbitals with molecular shapes, we introduce the concept of hybrid orbitals. Hybridization is an extension of VSEPR theory and valence bond theory, providing a more complete understanding of how atomic orbitals combine to form the electronic structure of molecules.
Which statement about gases is true? A. They are made up of particles that always move very slowly. B. They are made up of particles that travel in a curved path when in motion. C. They are made up of hard spheres that vibrate quickly in stationary positions. D. They are made up of hard spheres that are in random motion.
Answer: D. They are made up of hard spheres that are in random motion.
Explanation:
A gas is a state of aggregation of matter in which, under certain conditions of temperature and pressure, its molecules interact weakly with each other, without forming molecular bonds, adopting the shape and volume of the container that contains them and tending to separate everything possible because of its high concentration of kinetic energy.
The molecules of a gas are practically free and have the ability to be distributed throughout the space in which they are contained because the gravitational forces and attraction between them are practically negligible compared to the speed at which they move. .
Therefore, gas molecules do not travel specific trajectories or vibrate in a stationary position, instead they move quickly and randomly through the entire space of the container that contains them.
The true statement about gases is that they are made up of hard spheres that are in random motion, which is option D.
Among the given options, statement D is true. Gases are composed of particles, such as atoms or molecules, that are in constant random motion. These particles move in straight lines until they collide with other particles or the walls of the container, where they undergo elastic collisions. The random motion of gas particles is responsible for their ability to fill the entire volume of the container and to exert pressure on the container walls.
Hence, the correct option is option d.
Learn more about gases here:
https://brainly.com/question/1369730
#SPJ 6
In a chemical reaction, the __________ is consumed completely during the reaction. A) stoichiometry B) excess reagent C) ideal compound D) limiting reactant
I believe it is D. because stoichiometry allows people to determine how much reactant is consumed in a chemical reaction.
Final answer:
The answer to the chemical reaction question is D) limiting reactant. It is the substance that is completely used up first in a reaction, determining the maximum amount of product that can be produced.
Explanation:
In a chemical reaction, the limiting reactant is consumed completely during the reaction. The correct answer to the question is D) limiting reactant. A limiting reactant (or limiting reagent) is the substance that is entirely used up first in a chemical reaction, and it limits the amount of product that can be formed. Once the limiting reactant is used up, the reaction cannot proceed further, even if other reactants are still present in excess.
The excess reagent, on the other hand, is the reactant that remains after the reaction has gone to completion because it was present in a larger quantity than necessary according to the stoichiometric ratio defined by the balanced chemical equation.
To determine the limiting reactant in a chemical reaction, it is essential to compare the mole ratio of the reactants to the stoichiometric ratio from the balanced equation. The reactant in the smallest stoichiometric amount is the limiting reactant.
N the reactant side of the chemical equation, there are carbon atoms, hydrogen atoms, and oxygen atoms. In the product side of the chemical equation, there are carbon atoms, hydrogen atoms, and oxygen atoms. The number and kinds of atoms on both sides of the chemical equation are . So, this chemical equation is .
Answer: If the number and kinds of atoms on both sides of the chemical equation are same, the chemical equation is called as balanced chemical equation.
If the number and kinds of atoms on both sides of the chemical equation are different, the chemical equation is called as skeletal chemical equation.
[tex]CH_4+O_2\rightarrow CO_2+H_2O[/tex]
As the number of atoms on both sides of the chemical equation are different, the above equation represents a skeletal chemical equation.
[tex]CH_4+2O_2\rightarrow CO_2+2H_2O[/tex]
As the chemical equations must follow the law of conservation of mass, the number of atoms on both sides of the above chemical equation must be same so as the mass is same on both sides of the equation. So the equation was balanced.
Answer:
In the reactant side of the chemical equation, there are 4 carbon atoms, 12 hydrogen atoms, and 14 oxygen atoms. In the product side of the chemical equation, there are 4 carbon atoms, 12 hydrogen atoms, and 14 oxygen atoms. The number and kinds of atoms on both sides of the chemical equation are the same . So, this chemical equation is balanced
Explanation:
The reactants have 4 carbon atoms, 14 oxygen atoms, and 12 hydrogen atoms. The product has the same numbers and kinds of atoms. So, the equation is balanced.
The _______ elements tend to lose electrons and form positive ions, while the _______ elements tend to gain electrons and form negative ions.
The electropositive elements or metals elements tend to lose electrons and form positive ions, while the electronegative elements or non-metals tend to gain electrons and form negative ions.
What are metals?Metals are electropositive elements with extra electrons in their atom. Hence, they easily loss electron to achieve octet. Metals donate electrons to electron deficient non-metals forming ionic compounds.
Non -metal are located in right side of the periodic table. Except group 18 elements all the non-metals are electron deficient. Some of them such as oxygen, nitrogen, fluorine are highly electronegative and easily gain electrons from metal atoms forming ionic compounds or share electrons from other non-metals forming covalent compounds.
Therefore, metallic elements tend to lose electrons and form positive ions, while the electronegative elements or non-metals tend to gain electrons and form negative ions.
To find more on metals, refer here:
https://brainly.com/question/29404080
#SPJ5
Metals lose electrons and form positive ions, while non-metals gain electrons and form negative ions due to their atomic structure.
Explanation:The metals elements tend to lose electrons and form positive ions, while the non-metals elements tend to gain electrons and form negative ions. This is due to the atomic structure of these elements. Metals have fewer electrons in their outer shell, and thus they can easily lose them to become stable, which leads to the formation of positively charged ions. On the other hand, non-metals have more electrons in their outer shell and thus they need more electrons to become stable. As a result, they tend to receive electrons, forming negatively charged ions.
Learn more about Formation of Ions here:https://brainly.com/question/32135736
#SPJ6
You need to produce a buffer solution that has a pH of 5.40. You already have a solution that contains 10. mmol (millimoles) of acetic acid. How many millimoles of acetate (the conjugate base of acetic acid) will you need to add to this solution? The pKa of acetic acid is 4.74. Express your answer numerically in millimoles. View Available Hint(s)
Answer:
46. mmol
Step-by-step explanation:
The equation for the equilibrium is:
HA + H₂O ⇌ A⁻ + H₃O⁺
The solution is a buffer, so we can use the Henderson-Hasselbalch equation:
pH = pKa + log([A⁻]/[HA])
5.40 = 4.74 + log([A⁻]/(10.) Subtract 4.74 from each side
0.66 = log([A⁻]/(10.) Take the antilog of each dide
[A⁻]/10. = 10 ^0.66
[A⁻]/10. = 4.57 Multiply each side by 10.
[A⁻] = 46. mmol
You will add 46. mmol of sodium acetate.
The amount of acetate needed to add to the solution is ; 46 mmol
Given data:
pH of buffer solution = 5.4
volume of Solution ( H A ) = 10 mmol
pKa of acetic acid = 4.74
Given that the solution is a buffer solution we will apply Henderson-Hasselbalch equation:
pH = [tex]pKa + log ( [A^-] / [HA] )[/tex] -------- ( 1 )
Insert values into equation 1
[tex]5.40 = 4.74 + log([A^-]/(10 )[/tex]
0.66 = [tex]log([A^-]/(10.)[/tex] -------- ( 2 ) ( after subtracting pKa value from both side )
∴ [tex][A^-]/10. = 10^{0.66}[/tex] ----- ( 3 ) ( antilog )
Multiply both sides of equation 3 by 10
[tex][A^-] = 46 mmol[/tex].
Hence we can conclude that the amount of acetate needed to add to the solution is 46 mmol
Learn more : https://brainly.com/question/23570638
Which one of these is the accepted name for the compound n2o5?
a. dinitrogen oxide
b. nitrogen pentaoxide
c. dinitrogen pentoxide
d. dinitrogen pentaoxide
The accepted name for N2O5 is dinitrogen pentoxide.
The accepted name for the compound N2O5 is dinitrogen pentoxide. It is formed by the combination of two nitrogen atoms and five oxygen atoms. The prefix 'di' indicates that there are two nitrogen atoms, and the prefix 'pento' indicates that there are five oxygen atoms.
Learn more about compound name here:https://brainly.com/question/12449358
#SPJ6
Which of the following describes the specific copper ion in the compound, CuS?
Cupride ion
Copper (I) ion
Copper (II) ion
Cupride (I) ion
If a sample of pure silver (Ag) contains 3.35 x 1022 atoms of silver, how many moles of silver are in the sample?
A) 17.9 mol
B) 2.82 mol
C) 0.180 mol
D) 0.0556 mol
the answer is D 0.0556 mol
divide the given number of atoms 3.35x10^22 by 6.02x10^23 Avogadro's number(the number of atoms in one mol of anything) to get the total number of Moles. It's merely a fraction of a whole. 3.35/60.2 if you cancel out the tens. 1.0 mol mercury(the molar mass is the mass number on a periodic table) It couldn't possibly be so few atoms is to be gold or atoms of mercury as there are 6.02x10^23 atoms in a 0.0556 mol.
have a nice day hope this helps !!!!!!!
How many grams of carbon monoxide are needed to react with an excess of iron (III) oxide to produce 198.5 grams of iron? Fe2O3(s) + 3CO(g) --> 3CO2(g) + 2Fe(s)
Please SHOW WORK so I can understand the concept
The grams of carbon monoxide is 148. 68 g
calculation
Fe₂O₃(s) + 3CO (g) → 3 CO₂(g) + 2Fe (s)
Step 1: find the moles of CO
moles = mass÷ molar mass
from periodic table the molar mass of Fe =56 g/mol
moles = 198.5 g÷ 56 g/mol =3.54 moles
Step 2 : use the mole ratio to determine the moles of Co
from given equation Co: Fe is 3: 2
therefore the moles of CO = 3.54 moles x 3/2= 5.31 moles
Step 3 Find mass of Co
mass = moles × molar mass
from periodic table the molar mass of CO = 12+ 16 = 28 g/mol
= 5.31 moles × 28 g/mol = 148.68 g
list 2 extensive properties and 3 intensive properties of a 5.0g, 1 cm3 cube of silver
Properties of matter can be broadly classified into two categories:
Physical properties which usually involve a change in the state of matter and Chemical properties which involve a change in the chemical composition of matter.
Now, physical properties can be further classified as:
Extensive: these depend on the amount of the substance, eg: mass, volume
Intensive: these do not depend on the amount of the substance eg: density, color, melting point, boiling point
Here we are given a 5.0 g and 1 cm3 silver cube :
Therefore:
Extensive properties are-
1) Mass of silver = 5.0 g
2) Volume of silver = 1 cm3
Intensive properties are:
1) Density of silver = mass/volume = 5.0 g/ 1 cm3 = 5.0 g/cm3
2) Melting point of silver = 962 C
3) Color = white/gray
Click the button within the activity, and analyze the relationship between the two reactions that are displayed. The reaction that was on the screen when you started and its derivative demonstrate that the change in enthalpy for a reaction, ΔH, is an extensive property. Using this property, calculate the change in enthalpy for Reaction 2. Reaction 1: C3H8(g)+5O2(g)→3CO2(g)+4H2O(g), ΔH1=â’2043 kJ Reaction 2: 6C3H8(g)+30O2(g)→18CO2(g)+24H2O(g), ΔH2=?
Answer:
-12 258 kJ
Step-by-step explanation:
Reaction 1: C₃H₈(g)+5O2(g) ⟶ 3CO₂(g)+ 4H₂O(g); ΔH₁ = - 2 043 kJ
Reaction 2: 6C₃H₈(g)+30O2(g) ⟶ 18CO₂(g)+ 24H₂O(g); ΔH₂ = -12 258 kJ
Reaction 2 is Reaction 1 multiplied by 6.
ΔH is an extensive property, so you must also multiply ΔH by 6.
Final answer:
The enthalpy change for Reaction 2 is calculated by multiplying the given enthalpy change for Reaction 1 by the factor of six. Since enthalpy is an extensive property, Reaction 2's enthalpy change is –12258 kJ.
Explanation:
ΔH, or change in enthalpy, is an extensive property, which means it is proportional to the amounts of reactants and products in a reaction. In the student's question, we need to calculate the enthalpy change for Reaction 2 based on the given enthalpy change for Reaction 1. We are given that the enthalpy change for Reaction 1, which is the combustion of propane [tex](C_3H_8)[/tex], is [tex]\Delta H_1 = -2043 kJ[/tex]:
[tex]C_3H_8(g) + 5O_2(g) \rightarrow 3CO_2(g) + 4H_2O(g), \Delta 2 \Delta H_1 = -2043 kJ[/tex]
For Reaction 2, the equation is the same but scaled up by a factor of six:
[tex]6C_3H_8(g) + 30O_2(g) \rightarrow 18CO_2(g) + 24H_2O(g), \Delta 2 \Delta H_2 = ?[/tex]
To find ΔH2, we multiply ΔH1 by the scaling factor, which is six, because enthalpy is an extensive property:
[tex]\Delta H_2 = 6 \times \Delta H_1 = 6 \times (-2043 kJ) = -12258 kJ[/tex]
Therefore, the enthalpy change for Reaction 2 is ΔH2 = –12258 kJ.
What is the empirical formula? A compound is used to treat iron deficiency in people. It contains 36.76% iron, 21.11% sulfur, and 42.13% oxygen. The empirical formula is FeSO. Reset Next
Empirical Formula is Fe1S1O4
(the numbers are suppose to be subscript)
Answer: [tex]FeSO_4[/tex]
Solution : Given,
If percentage are given then we are taking total mass is 100 grams.
So, the mass of each element is equal to the percentage given.
Mass of Fe = 36.76 g
Mass of S = 21.11 g
Mass of O = 42.13 g
Step 1 : convert given masses into moles.
Moles of Fe =[tex] \frac{\text{ given mass of Fe}}{\text{ molar mass of Fe}}= \frac{36.76g}{56g/mole}=0.65moles[/tex]
Moles of S = \frac{\text{ given mass of S}}{\text{ molar mass of S}}= \frac{21.11g}{32g/mole}=0.65moles
[/tex]
Moles of O = \frac{\text{ given mass of O}}{\text{ molar mass of O}}= \frac{42.13g}{16g/mole}=2.63[/tex]
Step 2 : For the mole ratio, divide each value of moles by the smallest number of moles calculated.
For Fe = [tex]\frac{0.65}{0.65}=1[/tex]
For S = [tex]\frac{0.65}{0.65}=1[/tex]
For O =[tex]\frac{2.63}{0.65}=4[/tex]
The ratio of Fe : S : O= 1 : 1 : 4
Hence the empirical formula is [tex]Fe_{1}S_{1}O_4[/tex]
What is the molarity of a saline solution that contains 0.900 g NaCl (58.44 g/mol) dissolved in 100.0 mL of solution?
The molarity of a saline solution that contain 0.900 g NaCl (58.44 g/mol) dissolved in 100.0 ml solution is 0.15 M
calculation
Molarity = moles /volume in liters
volume in liters = 100.0 ml / 1000 = 0.1 L
moles = mass÷ molar mass
= 0.900 g ÷58.44 g/mol =0.015 moles
molarity is therefore = 0.015 moles / 0.1 L =0.15 M
Which of the following models best describes the arrangement of valence electrons in metals?
(1 point)
A body-centered cube
Octets of electrons
A rigid array of electrons
A sea of electrons
The arrangement of valence electrons in metals can be best described by the
A sea of electrons.
How much heat is absorbed by a 56g iron skillet when its temperature rises from 7oC to 28oC?
The heat absorbed is calculated with the help of the formula,
Q = mCΔT
Q is heat absorbed, m is mass given as 56 gms, C is the specific heat of iron, that is, 0.449 J/g°C, and delta T is the change in temperature, which is 28 - 7 = 21°C
Thus, Q = 56 × 0.449 × 21 = 528 J
What term is used to describe the energy level of any level higher than the ground state of a particle?
A. Photon state
B. Excited state
C. Higher state
D. Emission state
Answer:
B. Excited state
Explanation:
Energy levels higher than the ground state are called the excited states. This concept is based on the premise that electrons can move round the nucleus in certain permissibe orbits or energy levels.
The ground state is the lowest energy state available to the electron. This is usually the most stable state.
The excited state is any level higher than the ground state. An electron in an energy level has a definite amount of energy associated with it at that level.
The following chemical equation describes the chemical reaction of hydrogen gas and oxygen gas to create water 2H2 + O2 = 2H2O Use what you know about molar relationships to explain how scientists can predict the amount of water produced if they know the amounts of hydrogen and oxygen gases they have to react.
Answer: [tex]2H_2+O_2\rightarrow 2H_2O[/tex]
The molar relationship says that every 1 mole of an element or compound weighs equal to its molecular weight.
As 1 mole of molecular hydrogen [tex]H_2[/tex] weighs 2 g.
2 moles of molecular hydrogen will weigh[tex]=\frac{2}{1}\times {2}=4g[/tex]
1 mole of molecular oxygen [tex]O_2[/tex] weighs 32 g
1 mole of water [tex] H_2O[/tex] weighs = 18g
2 moles of water [tex] H_2O[/tex] weigh=[tex]\frac{18}{1}\times {2}=36g[/tex]
As can be seen from the balanced chemical equation above, 2 moles of hydrogen react with 1 mole of oxygen to produce 2 moles of water.
Thus 4g of [tex]H_2[/tex] combines with 32 g of [tex]O_2[/tex] to give 36 moles of [tex] H_2O[/tex].
The study of chemicals and bonds is called chemistry. There are different types of elements, and these are metals and nonmetals.
The correct answer is 36 mole
What is a mole?A standard scientific unit for measuring large quantities of very small entities such as atoms, molecules, or other specified particles.
According to the question, the 2 moles of water react with the mass of water:-
[tex]\frac{18}{1}*2 = 36g[/tex].
Hence, 36 g is used to react with hydrogen and oxygen.
For more information about the moles, refer to the link:-
https://brainly.in/question/9531558
The molar mass of a solid carboxylic acid is determined by titrating a known mass of the acid with a standardized solution of NaOH to a phenolphthalein endpoint. Which errors will lead to a molar mass that is smaller than the actual molar mass? I. Some of the acid is spilled when being transferred into the titration flask. II.The endpoint is recorded when the solution is dark red in color rather than light pink.
In a titration, a molar mass lower than the actual one could be obtained by spilling part of the acid before titration or recording a dark red color instead of a light pink as the endpoint. These errors would lower the calculated molar mass because either too little acid or too much NaOH is assumed for the reaction.
Explanation:In a titration experiment with a carboxylic acid and a standardized NaOH solution, there are factors that could lead to the measurement of a molar mass that is smaller than its actual value.
Error I: If some of the carboxylic acid is spilled when being transferred into the titration flask, this will decrease the amount of acid available for titration. This leads to an underestimation of the amount of NaOH needed for neutralization and therefore a smaller calculation for molar mass.
Error II: If the endpoint of the titration is recorded when the color is dark red rather than light pink, this means that the end-point has been overshot – too much NaOH has been added. This excess amount would lead to the calculation of a smaller molar mass since an increased volume of NaOH is wrongly assumed to have neutralized the acid.
Titration analysis therefore requires real accuracy both in process and observation to avoid such errors. It is important to determine and record the right endpoint based on a distinct, recognized color change with the suitable indicator, in this case, a change from colorless to light pink with phenolphthalein.
Learn more about Titration errors here:https://brainly.com/question/37817225
#SPJ12
The correct answer is that both errors I and II will lead to a molar mass that is smaller than the actual molar mass.
I. Some of the acid is spilled when being transferred into the titration flask.
When some of the acid is spilled, the mass of the acid that is actually titrated is less than the mass that was intended to be titrated.
Since molar mass is calculated by dividing the mass of the substance by the number of moles of that substance, a smaller mass will result in a smaller calculated molar mass if the number of moles is not adjusted accordingly.
The molar mass (M) is given by:
[tex]\[ M = \frac{m}{n} \][/tex]
where m is the mass of the acid and n is the number of moles of the acid.
If the mass m is smaller due to spillage, and n remains the same (because the titre does not change), then the calculated molar mass M will be smaller.
II. The endpoint is recorded when the solution is dark red in color rather than light pink.
Phenolphthalein is a common acid-base indicator that is colorless in acidic solutions and pink in basic solutions.
The endpoint of the titration is reached when the solution changes from colorless to light pink, indicating that the acid has been neutralized by the NaOH.
If the endpoint is recorded when the solution is dark red, it means that the titration has continued past the true endpoint, adding excess NaOH.
This excess NaOH will not react with the acid (since it's already been neutralized), but it will be included in the calculation of the moles of NaOH used.
The number of moles of acid [tex](\( n_{acid} \))[/tex] is calculated using the moles of NaOH [tex](\( n_{NaOH} \))[/tex] used to reach the endpoint:
[tex]\[ n_{acid} = n_{NaOH} \][/tex]
If [tex]\( n_{NaOH} \)[/tex] is overestimated due to continuing the titration past the endpoint, then [tex]\( n_{acid} \)[/tex] will also be overestimated. Since the mass of the acid m remains unchanged, the calculated molar mass M will be smaller:
[tex]\[ M = \frac{m}{n_{acid}} \][/tex]
In conclusion, both spilling some of the acid and recording the endpoint too late will result in a calculated molar mass that is smaller than the actual molar mass of the carboxylic acid.
What is the net ionic equation for the reaction that is represented by the following total ionic equation?
Problem >>> Image 1
A. >>> Image 2
B. >>> Image 3
C. >>> Image 4
D. >>> Image 5
Answer:
B. >>> Image 3
Step-by-step explanation:
Ionic equation :
6Na⁺(aq) + 2PO₄³⁻(aq) + 3Ca²⁺(aq) + 6Cl⁻(aq) ⟶ 6Na⁺(aq) + 6Cl⁻(aq) + Ca₃(PO₄)₂(s)
=====
Net ionic equation:
Cancel all ions that appear on both sides of the reaction arrow (underlined).
6Na⁺(aq) + 2PO₄³⁻(aq) + 3Ca²⁺(aq) + 6Cl⁻(aq) ⟶ 6Na⁺(aq) + 6Cl⁻(aq) + Ca₃(PO₄)₂(s)
3Ca²⁺(aq) + 2PO₄³⁻(aq )⟶ Ca₃(PO₄)₂(s)
A. >>> Image 2 is wrong, because it is the molecular equation
C. >>> Image 4 is wrong, because it is not balanced.
D. >>> Image 5 is wrong, because the phosphate ion behaves as a unit. It does not break up into phosphorus and oxide ions.
Answer:
B is correct
Explanation:
Edge
**answer asap with explanation please
The table shows the nature of the reactants and products formed in a certain type of chemical reaction.
Nature of Reactants and Products
Reactants
Ionic compound + Ionic compound
Products
Ionic compound + Ionic compound
Which of the following is true about this type of chemical reaction?
It is a single replacement reaction, and all four compounds are different.
It is a double replacement reaction, and all four compounds are different.
It is a single replacement reaction, and each compound has the same set of ions.
It is a double replacement reaction, and each compound has the same set of ions.
Answer:
It is a double replacement reaction, and all four compounds are different.
Step-by-step explanation:
The equation for the reaction is
[tex]\underbrace{\hbox{ ionic compound + ionic compound}}_{\hbox{reactants}} \longrightarrow \underbrace{\hbox{ ionic compound + ionic compound}}_{\hbox{products}}[/tex]
This must be a double replacement reaction, in which the metal cations trade partners and all four compounds are different.
(A) and (C) are wrong, because single replacements involve elements in reactions of the type
element + compound ⟶ element + compound
(D) is wrong because, if each compound retained the same set of ions, there would be no reaction.
Answer:
It is a double replacement reaction, and all four compounds are different.
Explanation:
Just took the FLVS 4.03 Single and Double Replacement Reactions quiz. I got a 100.
URGENT!!!!!20PTS!!!!!!!!
Water is produced from the reaction of hydrogen and oxygen gas, according to the equation below. What is the excess reactant in the reaction of 4.2 moles of hydrogen with 3.0 moles of oxygen? 2H2(g) + O2(g) → 2H2O(l)
Answer: Oxygen is the excess reactant.
Explanation: [tex]2H_2+O_2\rightarrow 2H_2O[/tex]
As can be seen from the given chemical equation, 2 moles of hydrogen gas react with 1 mole of oxygen gas.
4.2 moles of hydrogen gas react with[tex]=\frac{1}{2}\times {4.2}=2.1mole[/tex] of oxygen gas.
Thus hydrogen is the limiting reagent as it limits the formation of product. And oxygen is the excess reagent as it is present in excess. (3-2.1) = 0.9 moles of oxygen are left as such.
All waves on the electromagnetic spectrum travel at the same speed in a vacuum.The speed of these waves in a vacuum is 3x108 m/s.As the wavelength of wave doubles,how does the speed and frequency of the wave change
The wavelength (λ), speed (c) and the frequency (ν) of a wave are related as:
ν = c/λ -----(1)
The speed of the waves is a constant in vacuum i.e. it remains at 3*10⁸ m/s. therefore, it will not change with changes in wavelength or frequency.
Let us consider:
ν1 = initial frequency and λ1 = initial wavelength
ν2 = final frequency and λ2 = final wavelength = 2(λ1)
based on equation (1) we have:
ν1/ν2 = λ2/λ1 = 2(λ1)/λ1 = 2
therefore: ν2 = 1/2(ν1)
The frequency will get reduced by one-half as the wavelength doubles.