An object is 39 cm away from a concave mirrors surface along the principles axis. If the mirrors focal length is 9.50 cm, how far away is the corresponding image?

Answer:

Decrease concentration decrease reaction rate.

Decrease surface area increase reaction rate

A. 237 N. The force of kinetic friction acting on him as he slides across the floor is Fk ≅ 237 N.

The equation of the force of kinetic friction is given by Fk = μk*N, where n = m*g. We know that the coefficient of kinetic friction between Gary's shoes and the wet kitchen floor is μk = 0.21, and Gary has a mass of 115kg. Substituting the values:

Fk = μk*n

Fk = (0.21)(115kg*9.8m/s²)

Fk = 236.67 N

Fk≅ 237 N

Answer:

237 N

Explanation:

A P E X

Answertrue

Explanation:

Baseball Digest is one of the publications on the sport of baseball is a True statement.

Explanation:

The baseball digest is the publication in regard to the baseball sport. It is published by the Grand Stand Publishing LLC in the city of Gurnee, state of Illinois, in United States. It was first published in the year of 1942 in August.  

It is being published in every 2 months in a year thereby, a total of 6 publications in a year. There are other publications as well for baseball namely, Baseball America, Baseball Hobby News, Baseball Register.

Answer:

B. Inelastic collision

Explanation:

There are two types of collision:

- Elastic collision: in an elastic collision, both the total momentum of the objects and the total kinetic energy of the objects involved are conserved before and after the collision

- Inelastic collision: in an inelastic collision, the total momentum of the objects is conserved before and after the collision, while the total kinetic energy is not - in fact, some of the kinetic energy is converted into other forms of energy (such as thermal energy) due to the presence of frictional forces

In particular, a perfectly inelastic collision is an inelastic collision in which the two objects stick together after the collision: in such a situation, the amount of kinetic energy "lost" (=converted into other forms) is maximum.

In the situation described in the problem, the two skaters stick together after the collision, so this is an example of perfectly inelastic collision.

Answer:

Reference point

Explanation:

When describing the motion of an object, a reference point is used in order to measure distances/displacements starting from that point. Most often, the position marked as zero is used as reference point for simplicity.

Distance is a measure of the space covered by an object in motion; it is a scalar, and its value depends on the path taken by the object.

On the contrary, displacement is a vector quantity, whose magnitude is equal to the distance (calculated on a straight line) between the ending location and the starting location of the motion of the object. This means that the displacement does not depend on the path taken by the object, but only on the locations of the initial and final point.

Answer:

Reference Point

Explanation:

This is correct because this is where everything starts.

Answer:true

Explanation:

Answer is Electrons

Answer:

generator

Explanation:

a machine that will convert mechanical, nuclear, or chemical energy into electrical energy.

The internal combustion engine in the car converts the potential chemical energy in gasoline and oxygen into thermal energy which is transformed into the mechanical energy that accelerates the vehicle ( increasing its kinetic energy ) by causing the pressure and performing the work on the pistons.

Answer:

27/5

Explanation:

In Lyman series, the electron returns to the first state while in Balmer series, it returns to the second state (first excited state).

ΔE = h(f₂-f₁) ; f ⇒ frequency

Hence, smaller the value of ΔE, smaller would be the frequency. Hence, to have minimum frequency for any particular spectral line, we'll have to find the minimum value of ΔE. For that to happen in Lyman series, the electron must jump from n=2 to n=1, and from n=3 to n=2 in Balmer series.

Ratio of minimum frequency of Lyman and Balmer series is equal to ratio of ΔE of Lyman to ΔE of Balmer. Minimum value of |ΔE| for Lyman series would be K(1-1/4)=3K/4 and that for Balmer series would be K(1/4-1/9) = 5K/36. Hence, ratio of minimum frequency of Lyman and Balmer series would be (3K/4)÷(5K/36), i.e. ratio = 27/5.

Please let me know if this helped :)

Answer:

C

Explanation:

This is because glass (2400 kg/m^3) is denser than water (1000 kg/m^3).  Water has a refractive index of water is 1.33 while that of glass is 1.54.  This means that because the light is traveling from a medium of lower to higher refractive index, it will slow down and most of it will be reflected back into the water medium.

Answer: D

Explanation: just took the test

Answer:

Transverse wave- Back and forth at right angles to the direction of the wave arrow.

longitudinal wave- bask and forth in the direction of the motion of the motion of the wave.

electromagnetic wave- two alternating waves moving at right angles to each other.

Explanation:

In a longitudinal wave, the particles vibrate at right angles in reference to the wave motion.

In a transverse wave, the particles vibrate parallel to the wave motion

Electromagnetic waves occur as a result of the interaction between two  waves and are normally transverse in nature.  

Answer:

Transverse wave ---> back and forth at right angles to the direction of the motion of the wave.

Electromagnetic wave ----> two alternating waves moving at right angles to each other.

Longitudinal wave ----> back and forth in the direction of the motion of the wave.

Explanation:

The answer is A.68 degrees

i think its (a) too.

Answer:

2020 days

Explanation:

The half life equation is:

A = A₀ (½)^(t / T)

where A is the final amount, A₀ is the initial amount, t is the amount of time, and T is the half life.

Here, A = 1.25 mg, A₀ = 2.50 mg, and T = 2020 days.

1.25 = 2.50 (½)^(t / 2020)

0.5 = ½^(t / 2020)

1 = t / 2020

t = 2020

It takes 2020 days.

The time required before a 2.50-mg sample of 146 61 pm is reduced to 1.25mg is 2020 days.

Half life is the time taken  by a radioactive material for the radioactivity of  to reduce by half its original value.

The half life equation is:

A = A₀ (½)^(t / T)

where A is the final amount, A₀ is the initial amount, t is the amount of time, and T is the half life.

Given is the value of A = 1.25 mg, A₀ = 2.50 mg, and T = 2020 days.

1.25 = 2.50 (½)^(t / 2020)

0.5 = ½^(t / 2020)

1 = t / 2020

t = 2020

Thus, time taken is 2020 days.

Learn more about half life.

https://brainly.com/question/24710827

#SPJ2

Answer:

Send a pic of it so i can mark it.

Explanation:

Hello! :)

C) heat from the sun

Why?

Because the sun’s heat makes the water turn to steam—or what we call “water vapor.”

Hope this helped and I hope I answered in time!

Good luck!

~ Destiny ^_^

Answer: C

Heat From the Sun

How Do I Know?

SCIENCE

Answer:

if i were you i would try to do the work because if you let someone else you wont be able to understand the question

Hello There!

Where is fluid pressure greatest? "2 meters below the surface of a swimming pool."

#13 "the weight of the fluid displaced by the object"

#14 25 N•m

#15 "5"

In an exothermic chemical reaction, energy is stored in the bonds of reactants before the reaction. It's higher than the energy of the products, hence when the reaction takes place, energy is released typically as heat.

In a typical exothermic chemical reaction, energy is stored in the chemical bonds of the reactants before the reaction. This energy is higher than that of the product molecules which arise after the reaction. When the reaction takes place, the stored energy is released as heat. This is why the reaction is called 'exothermic', as 'exo' means 'out' and 'thermic' means 'heat'.

An example of an exothermic reaction is the burning of natural gas. In this process, natural gas (methane) reacts with oxygen and release a large amount of energy as heat and light. So, in simple terms prior to an exothermic reaction, the reactants possess a relatively larger potential energy as compared to the products.

https://brainly.com/question/35869321

#SPJ2

Answer:

a. E=1440KJ

b. E=360KJ

c. E=1.8 J

Explanation:

I have the power (Watts) is expressed as Energy (Joules) / Time (seconds), also I have to[tex]1hour * \frac{60min}{1hour}*\frac{60s}{1min}\\1h=3600s[/tex]

so, for the lightbulb

[tex]100W= \frac{Energy}{3600s*4}\\Energy=100W*14400s\\ E=1440000J =1440KJ[/tex]

Analogously, for the microwave

[tex]1200W= \frac{Energy}{60s*5}\\Energy=1200W*300s\\ E=360000J =360KJ[/tex]

Now, I have to express the efficiency as Heat energy / power * 100 so[tex]1.8= \frac{Heat Energy}{100W}*100\\Heat Energy=1.8J[/tex]

Done

Answer:

In most materials, as heat energy is absorbed, the density decreases. IF a certain object is heated, it might appear bigger than usual because it expands as the molecules inside moves faster than usual. However the mass of it stays the same while the density decreases.

Answer:

It is called a surface wave (rayleigh wave) that transmits its energy with the wind blowing onto its surface.Hope this helps

Answer: 94 cm

Explanation:

The answer is not among the given options, however it can be approximated to 94 cm.

Hooke's law establishes that the elongation of a spring is directly proportional to the modulus of the force [tex]F[/tex] applied to it, as long as the spring is not permanently deformed:  

[tex]F=k (x-x_{o})[/tex] (1)

Where:  

[tex]k[/tex] is the elastic constant of the spring

[tex]x_{o}[/tex] is the length of the spring without applying force.  

[tex]x[/tex] is the length of the spring with the force applied.

According to this, we have a spring where only the force due gravity is applied.  In other words, the force applied is the weigth [tex]W[/tex]:

[tex]W=m.g[/tex] (2)

So, equation (1) can be rewritten as:

[tex]W=k (\Delta x)[/tex] (3)

Isolating [tex]k[/tex]:

[tex]k=\frac{W}{\Delta x}[/tex] (4)  From here we can deduce [tex]k[/tex] is the slope of the line of the graph shown, as follows:

[tex]k=\frac{m_{2}g-m_{1}g}{x-x_{o}}=g\frac{m_{2}-m_{1}}{x-x_{o}}[/tex]

Where:

[tex]m_{2}=400 g=0.4 kg[/tex]

[tex]m_{1}=200 g=0.2 kg[/tex]

[tex]g=9.8\frac{m}{s^{2}}[/tex] is the acceleration due gravity

[tex]x=15 cm=0.15 m[/tex]

[tex]x_{o}=7.5 cm=0.075 m[/tex]

[tex]k=9.8\frac{m}{s^{2}}\frac{0.4 kg-0.2 kg}{0.15 m-0.075 m}[/tex]

[tex]k=26.13 N/m[/tex] (5) This is the spring constant

Now, with the mass [tex]m=2.35 kg[/tex] we can calculate the weight:

[tex]W=m.g=(2.35 kg)(9.8\frac{m}{s^{2}})[/tex]

[tex]W=23.03 N[/tex] (6)

So, knowing [tex]k=26.13 N/m[/tex] and [tex]W=23.03 N[/tex] we can calculate [tex]\Delta x[/tex] from (3):

[tex]\Delta x=\frac{W}{k}[/tex] (7)

[tex]\Delta x=\frac{23.03 N}{26.13 N/m}[/tex] (8)

[tex]\Delta x=0.88 m=88.13 cm[/tex] (9)

The value that is nearest to 88.13 cm is 94 cm

The question is about determining how much a spring would stretch under a certain weight, based on Hooke's law. Without the spring constant or the graph data, it is impossible to provide the exact value. Nonetheless, it is crucial to acknowledge that the stretch (x) can be calculated from the formula of Hooke’s law (F=kx) substituting force (F) with mass times gravity (mg).

This problem is based on Hooke’s law, which is a principle in physics that states that the force needed to extend or compress a spring by a certain distance scales linearly with respect to that distance. The law is usually formulated as F = kx, where F is the force applied, x is the displacement of the spring (how much it is stretched), and k is the spring constant.

In this case, you want to find x (the stretch of the spring) when a certain mass (m) is hung from the spring. According to Newton’s second law, F = ma, where a is the acceleration due to gravity. However, in this context, F can also be thought of as the weight of the mass, which is mg. So, F = mg. Therefore, mg = kx.

Unfortunately, without knowing the value of the spring constant (k), or having the actual data from the graph, it is not possible to calculate how much the spring would stretch when a 2.35 kg mass is hung from it.

https://brainly.com/question/35616799

#SPJ12

Answer:

11 m/s

Explanation:

Impulse equals change in momentum.

I = Δ(mv)

Since mass isn't changing:

I = m Δv

16 Ns = (2.0 kg) (v - 3.0 m/s)

v = 11 m/s

Answer:

It has one proton instead of a neutron (beta-minus decay) or a neutron instead of a proton (beta-plus decay)

Explanation:

- In a beta-minus decay, a neutron in the nucleus turns into a proton, emitting an electron and an anti-neutrino:

[tex]n \rightarrow p + e^- + \bar{\nu}[/tex]

In this process, therefore, the final nucleus will have a proton instead of a neutron. This means that the atomic number Z (number of protons) will increase by one, while the mass number A (number of protons+neutrons) will remain the same.

- In a beta-plus decay, a proton in the nucleus turns into a neutron, emitting a positron and a neutrino:

[tex]p \rightarrow n + e^+ + \nu[/tex]

In this process, therefore, the final nucleus will have a neutron instead of a proton. This means that the atomic number Z (number of protons) will decrease by one, while the mass number A (number of protons+neutrons) will remain the same.

Answer:

Explanation:

If it moves, the object has KE. The formula for KE is

KE = 1/2 mv^2

In order to have a measurable KE, you only need the object to have a mass (m) and a speed(v). If it has those two things, it has KE.

Answer: A device that uses infrared sensors.

Explanation:

Answer:

a device that uses infrared sensors to create pictures that show variations in temperature

Explanation:

Gradpoint

Answer:

5.5 billion years

Explanation:

The answer

Answer:

5 billion years

Explanation:

A star like the Sun is called a main sequence star. It is considered as young age star. Sun is a medium sized star and its mass determines how long it can continue in its present form.

Its heat and light are a result of the thermonuclear fusion reactions that occur in its core. The proton cycle and carbon cycle are responsible for  generating the immense energy which is released in the form of heat and light. The amount of nuclear fuel ( hydrogen helium) present in the sun indicate that it can continue glowing at this state for another 5 or 5.5 billion years more. Sun formed abut 4.6 or 5 billion years ago, as shown from the calculations.  

Answer:

Explanation:

12 + 22 + 11 = 45

There are 45 atoms, and there are three elements: C, H, and O.

You've got some UHF radio waves at the long end of that range.  But most of the range consists of microwaves.

For example:  In the US, the "microwave oven" kitchen appliance cooks with radiation at a wavelength of about 12.2 cm .  

Hi!

So if you drop a basketball from a higher height, it has more time to gather more energy, which it then forces against the ground and causes the ball to bounce.

Hope this helps! Sorry I didn't really use any technical terms!

The basketball do not bounce back to the same height after each drop due to the fact of loss of kinetic energy.

Explanation:

When the basketball or any ball is dropped off from a certain height it falls down under the influence of gravity with the kinetic energy which has been transferred to the ball with hand by dribble.

When the basketball hits the ground with the kinetic energy, it loses some of the energy to the ground and then with the action reaction pair with the ground, is bounced back but with lower energy to a lower height.

Answer:

B. Earth rotates on its axis and orbits the sun.

Explanation:

The model given by Ptolemy was a geocentric model. It described Earth as the center of the universe and remains stationary on its axis.

Copernicus gave a heliocentric model. The sun is at the center of the solar system and Earth revolves around the sun as well as rotates on its axis.

Thus, the correct option is B.

Copernicus's heliocentric model places the Sun at the center with Earth rotating on its axis and orbiting the Sun. This is in contrast to Ptolemy's geocentric model where Earth is at the center.

Nicolaus Copernicus's model of the universe is known as the heliocentric model, which is different from Ptolemy's geocentric model. Copernicus suggested in 1543 that the Sun is at the center of the universe, and Earth, along with the other planets, orbits around it. This model was more straightforward and accurate compared to the Ptolemaic system, which had Earth at the center and required complex mechanisms like epicycles and deferents to describe planetary motions. The correct statement regarding Copernicus's belief is B. Earth rotates on its axis and orbits the sun.