An SCl2 molecule has ______(polar or nonpolar) bonds and a _________(bent, linear, tetrahedral, trigonal planar, trigonal pyramidal) molecular shape. As a result, an SCl2 molecule is ______.(polar or nonpolar)

Avagadros law states that at constant pressure and temperature conditions the volume is directly proportional to number of moles of gas

[tex]\frac{v1}{n1} = \frac{v2}{n2} \\[/tex]

where v1 is volume and n1 is number of moles at first instance

v2 is volume and n2 is number of moles after some of the gas is released

substituting the values in the equation

[tex]\frac{8.00 L}{1.200 mol} = \frac{5.25 L}{n2}[/tex]

n2 = 0.788 mol

after some of the gas is released only 0.788 mol remain

Answer:

a small rock sitting on top of a big rock

a stretched rubber band

Explanation:

A small rock sittin on the top of a big rock has stored energy because of the potential energy that it contains, as well as the stretched rubber band in all the kinetic energy that is stored in the streched rubber band and it is just about to free it as soon as what is keeping it stretched liberates it.

Answer

1. 1cm=10mm, 1kg=1000g and 12in=1 ft

2. 50mm=5cm

    48 in =4ft

     36ft=12 yd

     2.5m=250cm

     1000mL= 1 L

Explanation

if 1cm=10mm then 5cm=?

5×10=50mm

if 12 in =1ft then 48in=?

48/12 =4 ft

if 1m=100cm, then 2.5m=?

2.5×100= 250cm

and when know from capacity that 1000mL is equivalent to 1 liter.

The answer is 0.12 moles of SO2.

The answer is 0.12 moles of SO2

please mark brainiest i just need one more crown so i could be an expert please and thank you =)

Answer:

W = ΔKE = 1/2mv₂⁽²⁾ - 1/2mv₁⁽²⁾

Explanation:

Work means Change In Kinetic Energy.

Kinetic-Energy is equal to change in velocity multiplied by mass and divided by 2

∴ KE = 1/2m²

Change in Kinetic-Energy =KE₂ - KE₁

                                             =1/2mv₂⁽²⁾ - 1/2mv₁⁽²⁾

The work-kinetic energy theorem is expressed by the equation: [tex]\[ W_{\text{net}} = \Delta KE \][/tex]. So, the correct option is: d) [tex]\( W_{\text{net}} = \Delta KE \)[/tex].

The work-kinetic energy theorem states that the net work done on an object is equal to the change in its kinetic energy. Mathematically, it is expressed as [tex]\(W_{\text{net}} = \Delta KE\)[/tex]. Here, [tex]\(W_{\text{net}}\)[/tex] represents the net work done on the object, and [tex]\(\Delta KE\)[/tex] is the change in kinetic energy.

This theorem is fundamental in understanding the relationship between the work done on an object and the resulting change in its motion.

When a net force is applied to an object, it performs work, transferring energy to or from the object. This work leads to a change in the object's kinetic energy, which is associated with its motion. If the net work is positive, the kinetic energy increases, implying an acceleration or an increase in speed.

Conversely, if the net work is negative, the kinetic energy decreases, resulting in deceleration or a decrease in speed. The work-kinetic energy theorem provides a crucial link between the concepts of work and energy in the dynamics of moving objects.

Complete Question:

Which of the following equations expresses the work-kinetic energy theorem?

a) [tex]$\mathrm{ME}_{\mathrm{i}}=\mathrm{ME}_{\mathrm{f}}$[/tex]

c) [tex]$\triangle W=K E$[/tex]

b) [tex]$W_{\text {net }}=P E$[/tex]

d) [tex]$W_{\text {net }}=\Delta K E$[/tex]

diffract through an open doorway in order to propagate into the hallway.

Answer:

Diffract

Explanation:

The diffraction of sound waves is the description of how sound waves bend, change direction, as they travel around the edges of obstacles. The diffraction occurs as a result of the bending of sound waves as they find the path of least resistance to the travel path. The amount and magnitude of the diffraction occurs in proportion to the opening in the obstacle pathway. The diffraction is a property of sound that helps it bend around the corners and obstacles.

Answer:

When selecting a material to use as a light bulb filament, there are several important properties to consider. However, one property that is not important in this context is color. The color of the filament does not affect its functionality or performance as a light source.

The primary function of a light bulb filament is to produce light when an electric current passes through it, and its color does not impact this process. The color of the light emitted by the bulb is determined by other factors, such as the gases or coatings inside the bulb.

When selecting a material for a light bulb filament, important properties to consider include:

1. Resistance: The material should have high electrical resistance to prevent excessive current flow and overheating.

2. Melting Point: The material should have a high melting point to withstand the high temperatures generated by the electric current passing through it.

3. Conductivity: The material should have good electrical conductivity to efficiently carry the current and produce light.

4. Durability: The material should be durable enough to withstand repeated heating and cooling cycles without breaking or deforming.

5. Cost: The material should be cost-effective to produce in large quantities, as light bulbs are commonly used in everyday applications.

By considering these properties, manufacturers can select the most suitable material for the filament, ensuring optimal performance and longevity of the light bulb.

The Answer Is D. Have A Great Day

Answer:

D

Explanation:

Solar energy.

This whole process starts with the solar energy. It also involves the sun within the process. Solar energy is radiant light and heat that comes from the sun. So it seems to fit in with the story that was given.

Best of luck on your assignment!

- Emacathy

Answer:

B) solar energy

Explanation:

Charles' Law is a special case of the ideal gas law. It states that the volume of a fixed mass of a gas is directly proportional to the temperature. This law applies to ideal gases held at a constant pressure, where only the volume and temperature are allowed to change.

Charles' Law is expressed as:

Vi/Ti = Vf/T f

where

Vi = initial volume

Ti = initial absolute temperature

Vf = final volume

T f = final absolute temperature

It is extremely important to remember the temperatures are absolute temperaturesmeasured in Kelvin, NOT °C or °F.

Mark as brainliest x ♡

Answer:

[OH⁻] = 10⁻¹⁴/[H⁺].

Explanation:

∵ [H⁺][OH⁻] = 10⁻¹⁴.

∴ [OH⁻] = 10⁻¹⁴/[H⁺].

Answer:

[tex]Kw = [H+][OH-][/tex]

Explanation:

For a given solution H+ refers to the hydrogen ion concentration and is indicative of the acidity of the solution. The more the [H+] concentration, higher is the acidity. Similarly, OH- refers to the hydroxide ion concentration and reflects the basicity of the solution. A solution with a higher OH- concentration is said to be basic.

The two are related by considering the dissociation of water:

[tex]H2O(l)\rightleftharpoons H+(aq)+ OH-(aq)[/tex]

The dissociation constant for water, Kw is:

[tex]Kw = [H+][OH-]\\\\where\ Kw = 10^{-14} \\\\10^{-14} = [H+][OH-]\\[/tex]

[tex][H+] = \frac{10^{-14}}{[OH-]}[/tex]

= 20,280.25 g or 20.28 Kg

Number of moles, n = Molarity × Volume

Molarity = 6.81 M

Volume = 8.7 L

Number of moles = 6.81 × 8.7

                             = 59.247 moles

Mass = Moles × Molar mass

         = 59.247 ×  34.2 g/mol

          = 20,280.25 or

          = 20.28 Kg

Answer: Its C

Explanation: I did the test and got it correct

The molality of a solution is defined as the number of moles of solute  per kilogram of solvent .The correct option is C.

Molality is a measure of the concentration of a solution because it expresses the amount of solute in a given amount of solvent.It is different from the molarity  which is defined as the number of moles of solute per liter of solution .

The primary advantage of using molality as a measure of concentration is that molality only depends on the masses of solute and solvent, which are unaffected by variations in temperature and pressure. In contrast, solutions prepared volumetrically .

Thus, the correct option is 'C'.

Learn more about molality,here:

https://brainly.com/question/29808886

#SPJ6

Mole measure the number of elementary entities of a given substance that are present in a given sample. Therefore, 1.26×10²³ molecules are there in 24 grams of  FeF[tex]_3[/tex].

The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number.

Mathematically,

mole =given mass ÷ molar mass

given mass of FeF[tex]_3[/tex]=24 grams

Molar mass of FeF[tex]_3[/tex] = 112.84 g/mol

mole =24 ÷ 112.84

        =0.21 moles

number of molecules/atoms=number of moles × 6.022×10²³

number of molecules=0.21 × 6.022×10²³ molecules

                                   = 1.26×10²³ molecules

Therefore, 1.26×10²³ molecules are there in 24 grams of FeF[tex]_3[/tex].

To know more about mole, here:

https://brainly.com/question/15209553

#SPJ2

B: quantity of solute with a specific volome of solvent.

Have a Nice Day :)

Answer: quantity of solute dissolved in a given quantity of solvent

Explanation:-

Dilute : is defined as a solution in which amount of solvent is more than the amount of solute.

Concentrated: is defined as a solution in which amount of solute is more than the amount of solvent.

ppm: ppm is defined as the concentration when 1 part of the solute is  dissolved per 1 million of the solution.

Molarity: Molarity of a solution is defined as the number of moles of solute dissolved per Liter of the solution.

Molality : Molality of a solution is defined as the number of moles of solute dissolved per kg of the solvent.

Normality: Normality of a solution is defined as the number of ram equivalents of solute dissolved per Liter of the solution.

Answer:

Mass in grams of formaldehyde = 196.51 g

Explanation:

No. of molecules of formaldehyde = [tex]3.94 \times 10^{24}[/tex]

Moles is related with number of molecules as:

[tex]mol=\frac{No.\ of\ molecules}{Avogadro's\ no.}[/tex]

Avogadro's no. = [tex]6.02 \times 10^{23}[/tex]

moles of formaldehyde

                [tex]=\frac{3.94\times 10^{24}}{6.02\times 10^{23}} \\=6.544\ mol[/tex]

Molar mass of formaldehyde = 30.03 g/mol

Molar mass is related with mass as:

Mass = Moles × Molar mass

        = 6.544 × 30.03

       = 196.51 g

Use Charle's Law because we are dealing with volume and temperature.

[tex]\frac{v}{t} =\frac{v}{t}[/tex]

v₁= 3017.0 ml

t₂ = 0

v₂= ???

t₂= 273°C

Change all mL's to L because the question says "What is the volume (L)...".

3017.0 mL = 3.017 L

Change the temperature into Kelvins:   Kelvin = Celsius + 273.15

0°C = 273.15 K

273°C = 546.15 K

Now you can plug it in the formula:

[tex]\frac{3.017}{273.15} = \frac{v}{546.15}[/tex]

Then, do cross multiplication.

(3.017) (546.15) = (273.15) v₂

1,647.73 = (273.15 K) v₂

                                         Divide 273.15 on both sides

6.0296 L= V₂

Answer:

= 5.93 %

Explanation:

Volume % of a component is given by the formula;

= (Volume of the component/Total volume of the solution) x 100

Volume of the component = 920 mL

Total volume of the solution = 920 + 58 = 978 mL

Therefore;

Cvolume % = 58 mL/978 mL × 100%

                   = 5.93 %

sample c because it has the highest absorption

The answer to that question would be Activation energy. If would like me to elaborate just let me know. :)

Answer: Activation energy

Explanation:

Activation energy is the minimum energy required to initiate a chemical reaction.

It is the minimum energy required to excite reactant to break bonds and react with each other in the system while creating new products.

Yes, potassium is a metal

the hybridization is probably sp2. it will have 1pi bond. There is a double bond between C and O atoms and that double bond consists of 1 pi bond and 1 sigma bond.

Final answer:

The hybridization of carbon in Cl₂CO is sp² due to three electron domains (two Cl atoms and one double-bonded O atom) resulting in a trigonal planar geometry.

Explanation:

The hybridization of the central carbon atom in Cl₂CO (phosgene) is sp². This is because the carbon atom is bonded to two chlorine atoms and an oxygen atom through a double bond. To determine this, we analyze the electron domains around the carbon atom. With three domains (two single bonds and one double bond), it adopts sp² hybridization, which allows for trigonal planar geometry. It is important to note that the double bond with oxygen consists of one sigma (σ) bond and one pi (π) bond. The pi bond results from the lateral overlap of unhybridized p-orbitals, whereas the sigma bond is formed by the head-to-head overlap of sp² hybrid orbitals from carbon and oxygen.

Atom

A chemical bond forms when the atom of one element interact(s) with an atom of another element.

These are the answers to the incomplete statements:

Land breeze: A land breeze is a wind that blows from land to sea during the night. This is because the land cools down faster than the sea at night, so the air over the land becomes denser and sinks, creating a low-pressure area. The air over the sea is warmer and less dense, so it rises to fill the low-pressure area, creating a wind that blows from land to sea.

Sea breeze: A sea breeze is a wind that blows from sea to land during the day. This is because the sea heats up faster than the land during the day, so the air over the sea becomes less dense and rises, creating a low-pressure area. The air over the land is cooler and denser, so it sinks to fill the low-pressure area, creating a wind that blows from sea to land.

Coriolis effect: The Coriolis effect is a phenomenon that causes moving objects on a rotating Earth to be deflected to the right in the Northern Hemisphere and to the left in the Southern Hemisphere. This is because the Earth's rotation causes a force to act on moving objects, which deflects them to the right in the Northern Hemisphere and to the left in the Southern Hemisphere.

Thermal: A thermal is a rising column of warm air that is created when the sun heats the ground. The warm air rises because it is less dense than the surrounding air. Gliding birds and sailplanes can ride thermals to gain altitude.

Air mass: An air mass is a large body of air with consistent temperature and moisture throughout. Air masses are formed over large areas of land or sea, and they can travel long distances.

Wind: Wind is the flow of air that occurs as a result of a pressure or temperature difference between two air masses. Wind can be caused by the uneven heating of the Earth's surface, by the rotation of the Earth, or by differences in air pressure.

Hurricane: A hurricane is a large, rotating storm that forms over warm tropical oceans. Hurricanes are characterized by strong winds, heavy rain, and high waves. Hurricanes can cause extensive damage to coastal areas.

El Niño–Southern Oscillation (ENSO): El Niño–Southern Oscillation (ENSO) is a climate pattern that occurs in the Pacific Ocean. ENSO is characterized by changes in the ocean temperature and wind patterns, which can have a significant impact on weather patterns around the world. El Niño is a warm phase of ENSO, while La Niña is a cold phase of ENSO.

Find out more on temperature difference here: https://brainly.com/question/31961492

#SPJ6

Step #1: Convert to grams.

120kg × (1000g ÷ 1kg) = 120000g of copper

Step #2: Convert sample mass of copper to moles by dividing sample mass to its atomic weight. Atomic weights could be found in periodic table.

120000g Cu × (1mol Cu ÷ 63.55g Cu) = 1888.277mol Cu

Step #3: Convert moles to atoms by multiplying moles to Avogadro's number.

1888.277mol Cu × (6.022x10^23 ÷ 1mol Cu) = 1.137x10^27 atoms Cu

*I attached a picture to help out with conversions.

There is 120000 grams in a pure copper statue.

Density = mass/volume.

You are given the density and asked to find the mass.  So, you need to find the volume.  According to Archimedes Principle, the volume displaced by an object is equal to the volume of that object.  So, in this problem the volume of the lead is the same as the volume of water that it displaced.  That would be  

95.6 ml - 73.2 ml = 22.4 ml.  

Density = mass/volume

11.3 g/ml = mass/22.4 ml

mass = 11.3 g/ml x 22.4 ml = 253 g (to 3 significant figures)

The problem deals with the concept of density and requires working out the change in volume when a lead cylinder is added to water. The mass of the lead cylinder is found by multiplying the density by the change in volume, providing an answer of approximately 253.2 grams.

The problem you've outlined can be solved using the concept of density. Density is defined as mass per unit volume. In your case, the volume changes when the lead cylinder is added to the water providing the volume of the lead cylinder. This change in volume is calculated as 95.6 mL - 73.2 mL = 22.4 mL. Now, since density is mass/volume, we can find the mass by multiplying density by volume: (11.3 g/mL) * (22.4 mL) = 253.2 grams. So the mass of the lead cylinder is approximately 253.2 grams.

https://brainly.com/question/6107689

#SPJ2

Answer: a principle stating that if a constraint (such as a change in pressure, temperature, or concentration of a reactant) is applied to a system in equilibrium, the equilibrium will shift so as to tend to counteract the effect of the constrain

26.2 kJ of energy are absorbed for every mole of carbon reacted

Answer: D) 26.2 kJ of energy are absorbed for every mole of carbon reacted.

Who cares? unless you wanna be a scientist when you get older. this is pointless

10 mL more water is needed to do so...