Answer:
The order of this half-life reaction is zero. This is a zero order reaction.
Explanation:
Step 1: Data given
At the pressure P0,1 of 55.5 kPa, the half-life is 340 s
At the pressure P0,2 of 28.9 kPa, the half-life is 178 s
Step 2: Calculate the order
(n-1) = ((log (t1/2P0,1 / t1/2P0,2)) / (log (P0,2 /P0,1)))
⇒ with t1/2P0,1 = the half-life at a pressure of 55.5 kPa = 340 s
⇒ with t1/2P0,2 = the half-life at a pressure of 28.9 kPa = 178 s
⇒ with P0,1 = the pressure of 55.5 kPa
⇒ with P0,2 = the pressure of 28.9 kPa
(n-1) = (log (340/178)) / log( 28.9/55.5)
(n-1) = log (1.91) / log(0.52)
(n-1) = 0.281 / -0.284
n-1 = -1
n = 0
The order of this half-life reaction is zero. This is a zero order reaction.
the molecular mass of a compound of carbon and hydrogen is 42. its empirical formula is
Answer:
Empyrical formula is CH₂
Explanation:
A compound of carbon and hydrogen which has a molar mass of 42 g/m, is the propene, alkene of 3 carbons.
CH₂ == CH --- CH₃
As the molecular formula is C₃H₆, the empyrical formula (which is the simplest chemical formula with the minimum amount in whole numbers between its atoms ) is CH₂
Why can the positive ions be considered to be fixed during the electrons’ oscillations?
Final answer:
Positive ions, which form the nucleus, are considered fixed during the electrons’ oscillations due to their significantly larger mass, which makes them relatively stationary compared to the lightweight and mobile electrons. In atomic models, this assumption simplifies the study of electronic behavior.
Explanation:
Positive ions can be considered to be fixed during the electrons’ oscillations because of their relatively large mass compared to electrons. In the context of atomic physics and the Bohr model, positive ions are essentially the nucleus of an atom, which is comprised of protons and neutrons. These particles are much heavier than the electrons and thus remain relatively stationary when the electrons oscillate or move in their orbits.
Within the atom, cations, which are positive ions, are created when elements lose one or more electrons. For example, group 1 elements in the periodic table lose one electron easily due to their electronic configuration, leading to a positive charge. The difference in mass means that while the electrons, which are lightweight and mobile, can oscillate or change their energy states quickly, the heavier protons in the nucleus (the cations) do not move significantly during these processes. Consequently, in many atomic models and explanations of electronic behavior, the positive ions are often treated as if they are fixed in place.
is the bonds that cause gaseous Cl2 to become liquid when cooled intramolecular or intermolecular
Answer:
Intermolecular
Explanation:
When a gas is cooled, attractive forces between molecules increases as the temperature is reduced and the average kinetic energy of the molecules decreases, intermolecular attraction becomes more significant and the gas condenses to liquid.
The change from gaseous Cl2 to liquid Cl2 when cooled is due to intermolecular forces, which are the attractions between Cl2 molecules and are weaker than the intramolecular forces that bond atoms within a molecule.
Explanation:The transition of gaseous Cl2 into a liquid when cooled involves forces known as intermolecular forces, which are attractions between molecules. These are different from intramolecular forces, which are the bonds that hold atoms together within a molecule. When Cl2 is cooled, the kinetic energy of its molecules decreases, allowing the intermolecular forces to bring them closer together, resulting in a liquid state. It's important to differentiate between these two types of forces, as intermolecular forces govern changes of state, such as from gas to liquid, whereas intramolecular forces are responsible for holding the atoms within a single molecule together and require significantly more energy to break.
2 MnO4-(aq) + 10 Br-(aq) + 16 H+(aq) → 2 Mn2+(aq) + 5 Br2(aq) + 8 H2O(l). How many electrons are transferred in the reaction represented by the balanced equation above?
Answer : The number of electrons transferred are, 10
Explanation :
Rules for the balanced chemical equation in acidic solution are :
First we have to write into the two half-reactions.
Now balance the main atoms in the reaction.
Now balance the hydrogen and oxygen atoms on both the sides of the reaction.
If the oxygen atoms are not balanced on both the sides then adding water molecules at that side where the less number of oxygen are present.
If the hydrogen atoms are not balanced on both the sides then adding hydrogen ion [tex](H^+)[/tex] at that side where the less number of hydrogen are present.
Now balance the charge.
The given balanced redox reaction is,
[tex]2MnO_4^-(aq)+10Br^-{aq)+16H^+(aq)\rightarrow 2Mn^{2+}(aq)+5Br_2(aq)+8H_2O(l)[/tex]
Step 1: Separate the skeleton equation into two half-reactions.
Oxidation : [tex]Br^-\rightarrow Br_2[/tex]
Reduction : [tex]MnO_4^-\rightarrow Mn^{2+}[/tex]
Step 2: Balance all atoms other than H and O.
Oxidation : [tex]2Br^-\rightarrow Br_2[/tex]
Reduction : [tex]MnO_4^-\rightarrow Mn^{2+}[/tex]
Step 3: Balance O.
Oxidation : [tex]2Br^-\rightarrow Br_2[/tex]
Reduction : [tex]MnO_4^-\rightarrow Mn^{2+}+4H_2O[/tex]
Step 4: Balance H.
Oxidation : [tex]2Br^-\rightarrow Br_2[/tex]
Reduction : [tex]MnO_4^-+8H^+\rightarrow Mn^{2+}+4H_2O[/tex]
Step 5: Balance the charge.
Oxidation : [tex]2Br^-\rightarrow Br_2+2e^-[/tex]
Reduction : [tex]MnO_4^-+8H^++5e^-\rightarrow Mn^{2+}+4H_2O[/tex]
Step 6: Equalize electrons transferred.
Oxidation : [tex]2Br^-\rightarrow Br_2+2e^-[/tex] × 5
Reduction : [tex]MnO_4^-+8H^++5e^-\rightarrow Mn^{2+}+4H_2O[/tex] × 2
and,
Oxidation : [tex]10Br^-\rightarrow 5Br_2+10e^-[/tex]
Reduction : [tex]2MnO_4^-+16H^++10e^-\rightarrow 2Mn^{2+}+8H_2O[/tex]
Step 7: Add the two half-reactions.
[tex]2MnO_4^-(aq)+16H^+(aq)+10Br^-(aq)\rightarrow 2Mn^{2+}(aq)+8H_2O(l)+5Br_2(aq)[/tex]
In this reaction, there are 10 number of electrons transferred.
Hence, the number of electrons transferred are, 10
The total number of electrons transferred in the reaction is 10.
The number of electrons transferred can be given by half reactions:
Oxidation reaction: [tex]\rm Br^-\rightarrow\;Br_2[/tex]
Reduction reaction : [tex]\rm MnO_4^-\;\rightarrow\;Mn^2^+[/tex]
The transfer of electrons can be balanced with the addition of a water molecule to the reaction. If the hydrogen atoms are not balanced on both sides then add hydrogen ion at that side where the less number of hydrogen is present. The electron transfer will be:
Oxidation reaction : [tex]\rm 2\;Br^-\;\rightarrow\;Br_2\;+\;2\;e^-[/tex]
Reduction reaction : [tex]\rm MnO_4^-\;+\;H^+\;+\;5\;e^-\;\rightarrow\;Mn^2^+\;+\;2\;H_2O[/tex].
By balancing the equation and electron transfer:
[tex]\rm 2\;MnO_4^-\;+\;16\;H^+\;10\;Br^-\;\rightarrow\;2\;Mn^2^+\;8\;H_2O\;+\;5\;Br_2[/tex]
The total number of electrons transferred in the reaction is 10.
For more information about the electron transfer, refer to the link:
https://brainly.com/question/1160226
At a certain temperature, 4.0 mol NH3 is introduced into a 2.0 L container, and the NH3 partially dissociates by the reaction. 2 NH3(g) N2(g) 3 H2(g) At equilibrium, 2.0 mol NH3 remains. What is the value of K for this reaction?
Answer:
K = 3.37
Explanation:
2 NH₃(g) → N₂(g) + 3H₂(g)
Initially we have 4 mol of ammonia, and in equilibrium we have 2 moles, so we have to think, that 2 moles have been reacted (4-2).
2 NH₃(g) → N₂(g) + 3H₂(g)
Initally 4moles - -
React 2moles 2m + 3m
Eq 2 moles 2m 3m
We had produced 2 moles of nitrogen and 3 mol of H₂ (ratio is 2:3)
The expression for K is: ( [H₂]³ . [N₂] ) / [NH₃]²
We have to divide the concentration /2L, cause we need MOLARITY to calculate K (mol/L)
K = ( (2m/2L) . (3m/2L)³ ) / (2m/2L)²
K = 27/8 / 1 → 3.37
Answer:
The value of K for this reaction is 1.69
Explanation:
Step 1: Data given
Moles of NH3 = 4.0 moles
Volume of the container = 2.0 L
At the equilibrium 2.0 moles NH3 remains
Step 2: The balanced equation
2 NH3(g) → N2(g) + 3H2(g)
Step 3: Initial number of moles
NH3: 4.0 moles
N2: 0 moles
H2: 0 moles
Step 4: Number of moles at the equilibrium
NH3: 2.0 moles
This means there reacts 2.0 moles of NH3
For 2 moles of NH3 we have 1 mol of N2 and 3 moles of H2
There will be produced 1 mol of N2 and 3 moles of H2
Step 5: Calculate molarity
Molarity = moles / volume
Molarity of NH3 = 2.0 moles / 2.0 L = 1 M
Molarity of N2 = 1.0 mol / 2.0 L = 0.5 M
Molarity of H2 = 3.0 mol / 2.0 L = 1.5 M
Kc = ([H2]³[N2]) / [NH3]²
Kc = (1.5³ * 0.5) / (1²)
Kc = 1.69
The value of K for this reaction is 1.69
Item 5 A solution of methanol, CH3OH, in water is prepared by mixing together 128 g of methanol and 108 g of water. The mole fraction of methanol in the solution is closest to
Final answer:
To find the mole fraction of methanol in the solution, calculate the moles of methanol and water in the mixture. The mole fraction of methanol is 0.4.
Explanation:
To find the mole fraction of methanol in the solution, we need to calculate the moles of methanol and water in the mixture. The formula for mole fraction (X) is the moles of the component divided by the total moles in the solution.
First, we calculate the moles of methanol by dividing the mass of methanol by its molar mass:
Moles of methanol = 128 g / 32.04 g/mol = 4 mol
Next, we calculate the moles of water by dividing the mass of water by its molar mass:
Moles of water = 108 g / 18.02 g/mol = 6 mol
The total moles in the solution is the sum of the moles of methanol and water:
Total moles = 4 mol + 6 mol = 10 mol
Finally, we can calculate the mole fraction of methanol:
Mole fraction of methanol = Moles of methanol / Total moles = 4 mol / 10 mol = 0.4
The mole fraction of methanol in the solution is 0.4.
A mixture of two or more elements at least one of which is a metal is called
Answer:
Alloy
Explanation:
Alloy: An alloy is a substance prepared by adding one or more element to a base or parent metal to obtain desirable products. The added element are usually metals or carbon. An alloy can be considered as a uniform mixture.
Examples of Alloy:
⇒ Brass is an alloy that contains 60 - 80% of copper and 20- 40% of zinc.
⇒Bronze is an alloy that contains 90% of copper and 10% of tin.
⇒ Steel is an alloy that contains 99.8% of iron and 0.2% of carbon.
Uses of Alloys:
⇒ They are used for making coins and medals
⇒ They are used in the construction of aircraft, ships and cars.
⇒They are used for making electromagnet.
When two atoms share electrons in order to have a completed outer shell, the bond is referred to as a:________.
Answer:
Covalent bond
Explanation:
Ionic bond- When 1 atom totally transfers 1 or more electron to another atom in order to reach stability.
Covalent bond- Is when 2 atoms share there electrons instead of transferring them so they both would be at a stable configuration.
Chromium may help lower the risk of __________ by increasing the effectiveness of _____.
Answer:
type 2 diabetes
insulin
Explanation:
type 2 diabetes is a chronic condition that affects the way the body processes blood sugar. A patient with type 2 diabetes in the body either doesn't produce enough insulin, or it resists insulin.
As Chromium levels can be below normal in people with type 2 diabetes. Research studies shows that taking drugs that contains chromium such as chromium picolinate can help increase the effectiveness of insulin levels and help insulin work in people with type 2 diabetes.
____ releases no sulfur when burned, has a higher net energy yield than other fossil fuels, and can be extracted and used without refining.
Answer:
Natural Gas
Explanation:
Naturally occurring hydrocarbon gas are popularly referred to as natural gas or fossil gas. It components include majorly methane gas, other higher alkanes, little percentage of CO₂, N₂, H₂S (hydrogen sulfide) etc. They are produced as a result of exposure of plant and animal matter to intense heat and pressure under the surface of the Earth over millions of years.When fossil gas/natural gas are burned, they release no sulphur content and there is usually a higher net energy yield than other fossil fuels.
Natural gas is a non-renewable hydrocarbon used as a source of energy such as electric generation, fuels for vehicles etc due to their higher net energy yield.
If 5.0 grams of sucrose, C12H22O11, are dissolved in 10.0 grams of water, what will be the boiling point of the resulting solution?
Answer : The boiling point of the resulting solution is, [tex]100.6^oC[/tex]
Explanation :
Formula used for Elevation in boiling point :
[tex]\Delta T_b=i\times k_b\times m[/tex]
or,
[tex]T_b-T^o_b=i\times k_b\times \frac{w_2\times 1000}{M_2\times w_1}[/tex]
where,
[tex]T_b[/tex] = boiling point of solution = ?
[tex]T^o_b[/tex] = boiling point of water = [tex]100^oC[/tex]
[tex]k_b[/tex] = boiling point constant = [tex]0.52^oC/m[/tex]
m = molality
i = Van't Hoff factor = 1 (for non-electrolyte)
[tex]w_2[/tex] = mass of solute (sucrose) = 5.0 g
[tex]w_1[/tex] = mass of solvent (water) = 10.0 g
[tex]M_2[/tex] = molar mass of solute (sucrose) = 342.3 g/mol
Now put all the given values in the above formula, we get:
[tex](T_b-100)^oC=1\times (0.52^oC/m)\times \frac{(5.0g)\times 1000}{342.3\times (10.0g)}[/tex]
[tex]T_b=100.6^oC[/tex]
Therefore, the boiling point of the resulting solution is, [tex]100.6^oC[/tex]
If you have 20.0 g of CO2, how many atoms of Oxygen (O) are present in the sample?
There are 1.25 moles of oxygen atoms in 20 g of O2, calculated by converting the mass to moles using the molar mass.
To determine the number of moles of oxygen atoms in 20 g of [tex]\(O_2\)[/tex], we first need to find the molar mass of [tex]\(O_2\)[/tex]. Oxygen [tex](\(O\))[/tex] has an atomic mass of approximately 16 g/mol. Since [tex]\(O_2\)[/tex] molecules contain two oxygen atoms, the molar mass of [tex]\(O_2\) is \(2 \times 16 \, \text{g/mol} = 32 \, \text{g/mol}\).[/tex]
Next, we use the formula:
[tex]\[ \text{Number of moles} = \frac{\text{Mass}}{\text{Molar mass}} \][/tex]
Substituting the given mass of [tex]\(20 \, \text{g}\)[/tex] and the molar mass of [tex]\(O_2\) (\(32 \, \text{g/mol}\)):[/tex]
[tex]\[ \text{Number of moles} = \frac{20 \, \text{g}}{32 \, \text{g/mol}} \][/tex]
[tex]\[ \text{Number of moles} = 0.625 \, \text{mol} \][/tex]
Since each molecule of [tex]\(O_2\)[/tex] contains 2 oxygen atoms, the number of moles of oxygen atoms is twice the number of moles of [tex]\(O_2\)[/tex]:
[tex]\[ \text{Number of moles of oxygen atoms} = 2 \times 0.625 \, \text{mol} = 1.25 \, \text{mol} \][/tex]
Therefore, there are [tex]\(1.25 \, \text{mol}\)[/tex] of oxygen atoms in [tex]\(20 \, \text{g}\)[/tex] of [tex]\(O_2\)[/tex].
The question probable maybe:
How many moles of oxygen atoms are there in 20 g of O2?
According to the equation above, how many moles of potassium chlorate, KClO3, must be decomposed to generate 1.0 L of O2 gas at standard temperature and pressure?
Answer:
Moles of potassium chlorate = 0.02976 moles
Explanation:
At standard pressure and temperature,
22.4 L of a gas consists of 1 mole
Thus, given, volume of [tex]O_2[/tex] = 1.0 L
So,
1 L of a gas consists of [tex]\frac{1}{22.4}[/tex] mole
Moles of oxygen gas = 0.04464 moles
The reaction is shown below as:-
[tex]2KClO_3\rightarrow 2KCl+3O_2[/tex]
3 moles of oxygen gas are produced when 2 moles of potassium chlorate undergoes reaction.
So,
1 mole of oxygen gas are produced when [tex]\frac{2}{3}[/tex] moles of potassium chlorate undergoes reaction.
Thus,
0.04464 mole of oxygen gas are produced when [tex]\frac{2}{3}\times 0.04464[/tex] moles of potassium chlorate undergoes reaction.
Moles of potassium chlorate = 0.02976 moles
From the decomposition reaction 2KClO₃(s) → 2KCl(s) + 3O₂(g), the number of moles of KClO₃ to be decomposed to generate 1.0 L of O₂ gas at standard temperature and pressure (STP) is 0.030.
The balanced chemical reaction for the decomposition of potassium chlorate (KClO₃) is the following:
2KClO₃(s) → 2KCl(s) + 3O₂(g) (1)
We can find the number of moles of O₂ gas with the Ideal gas equation:
[tex] PV = nRT [/tex]
Where:
P: is the pressure = 1.0 atm (at STP conditions)
V: is the volume = 1.0 L
R: is the gas constant = 0.082 L*atm/(K*mol)
T: is the temperature = 273 K (at STP conditions)
n: is the number of moles =?
The number of moles of O₂ gas is:
[tex] n_{O_{2}} = \frac{PV}{RT} = \frac{1.0 atm*1.0 L}{0.082 L*atm/(K*mol)*273 K} = 0.045 \:moles [/tex]
From reaction (1), we have that 2 moles of KClO₃ produce 3 moles of O₂, so the number of moles of KClO₃ resulting from the decomposition is:
[tex] n_{KClO_{3}} = \frac{2\:moles\:KClO_{3}}{3\:moles\:O_{2}}*0.045\:moles\:O_{2} = 0.030 \:moles [/tex]
Therefore, the number of KClO₃ moles to be decomposed is 0.030.
Find more here:
https://brainly.com/question/4147359?referrer=searchResults
I hope it helps you!
Pentane is a straight-chain hydrocarbon with the molecular formula C5H12. How many additional structural isomers can be constructed using this molecular formula?
Answer:
3
Explanation:
Firstly, we need to define the phenomenon know as isomerism. It is a phenomena in which 2 or more organic compounds have the same molecular formula but different structural arrangements.
In this special case of pentane, we are looking at other compounds whose molecular formulas are also C5H12 but have a different structure from that of pentane. It must be noted that two isomers might belong to the same homologous series or belong to a different homologous series entirely.
The first isomer is 2-methylbutane also known trivially as isopentane. It has the same molecular formula as said earlier with a methyl group substituted for a hydrogen atom on the second carbon of the principal chain of the molecule.
The second one is n-pentane itself. This is the normal straight chain pentane in its linear form.
The third one is 2-ethylpropane or dimethylpropane trivially knows as neopentane.
Pentane (C₅H₁₂) has three structural isomers: pentane, isopentane, and neopentane. These isomers differ in their carbon chain arrangement and have distinct properties, including boiling points. This brings the total number of structural isomers to three.
Pentane (C₅H₁₂) is a straight-chain hydrocarbon with a molecular formula that allows for three structural isomers. These isomers are:
Pentane – where all five carbon atoms are in a continuous chain.Isopentane (methylbutane) – which has a CH₃ branch off the second carbon atom of the continuous chain.Neopentane (dimethylpropane) – which has two CH₃ branches off the second carbon atom of the continuous chain.Therefore, besides the straight-chain version (pentane), there are two additional structural isomers for pentane, bringing the total number of isomers to three. Each of these isomers possesses unique properties, such as different boiling points: pentane (36.1°C), isopentane (27.7°C), and neopentane (9.5°C).
A 4.00 g sample of a metal (specific heat = 0.600 J g-1°C-1 is heated to 75 degrees Celcius and then dropped into 165 g of water in a calorimeter. What is the final temperature of the water if the initial temperature is 28 degrees Celcius? The specific heat capacity of water is 4.184 J/g.°C.
Answer:
28.16 °C
Explanation:
Considering that:-
Heat gain by water = Heat lost by metal
Thus,
[tex]m_{water}\times C_{water}\times (T_f-T_i)=-m_{metal}\times C_{metal}\times (T_f-T_i)[/tex]
Where, negative sign signifies heat loss
Or,
[tex]m_{water}\times C_{water}\times (T_f-T_i)=m_{metal}\times C_{metal}\times (T_i-T_f)[/tex]
For water:
Mass = 165 g
Initial temperature = 28 °C
Specific heat of water = 4.184 J/g°C
For metal:
Mass = 4.00 g
Initial temperature = 75 °C
Specific heat of water = 0.600 J/g°C
So,
[tex]165\times 4.184\times (T_f-28)=4.00\times 0.600\times (75-T_f)[/tex]
[tex]690360\left(T_f-28\right)=2400\left(75-T_f\right)[/tex]
[tex]692760T_f=19510080[/tex]
[tex]T_f = 28.16\ ^0C[/tex]
Hence, the final temperature is 28.16 °C
At constant temperature, the behavior of a sample of a real gas more closely approximates that of an ideal gas as its volume is increased because the:_________
(A) Collisions with the walls of the container become less frequent
(B) Average molecular speed decreases
(C) Molecules have expanded
(D) Average distance between molecules becomes greater
(E) Average molecular kinetic energy decreases
Answer: D
Explanation:
The molecular theory of gases states that there are no intermolecular forces between gases. Gas molecules are separated from each other such that individual molecules are far apart from each other. When volume is increased, gas molecules spread out from each other and the distance between them increases thus approximating the situation in ideal gases.
Final answer:
The behavior of a sample of a real gas more closely approximates that of an ideal gas as its volume is increased because the average distance between molecules becomes greater.
Explanation:
The behavior of a sample of a real gas more closely approximates that of an ideal gas as its volume is increased at constant temperature because the average distance between molecules becomes greater. In an ideal gas, the molecules are assumed to have zero volume, while in real gases, the molecules have small but measurable volumes. As the volume of the gas increases, the intermolecular distances become larger, reducing the frequency of molecule-wall collisions. This behavior is described by Avogadro's law, which states that increasing the number of gas molecules requires a proportional increase in the container volume to yield a constant number of collisions per unit wall area per unit time.
A laboratory technician drops a 0.0850 kg sample of unknown material, at a temperature of 100.0∘C, into a calorimeter. The calorimeter can, initially at 19.0∘C, is made of 0.150 kg of copper and contains 0.200 kg of water. The final temperature of the calorimeter can is 26.1∘C.
Answer:
1013.32 J/kg.K
Explanation:
The heat transferred by a changing in temperature without phase change can be calculated by:
Q = m*c*ΔT
Where m is the mass, c is the specific heat, and ΔT is the change in temperature (final - initial).
The values of c for water and copper can e found in thermodynamics tables:
cwater = 4.19x10³ J/kg.K
ccopper = 0.39x10³ J/kg.k
By the conservation of energy:
Qwater + Qcopper + Qmaterial = 0
0.200*4.19x10³*(26.1 - 19.0) + 0.150*0.39x10³*(26.1 - 19.0) + 0.085*c*(26.1 - 100) = 0
5949.8 + 415.35 - 6.2815c = 0
6.2815c = 6365.15
c = 1013.32 J/kg.K
The specific heat capacity of the unknown material is 1013.32 J/kg°C.
A calorimeter is used to measure the specific heat capacity of an unknown material. The calorimeter contains 0.200 kg of water and 0.150 kg of copper. A 0.085-kg sample of the unknown material is dropped into the calorimeter, and the temperature of the calorimeter increases from 19.0°C to 26.1°C. The specific heat capacities of water and copper are 4186 J/kg°C and 385 J/kg°C, respectively.
Heat transfer equation: Q = m * c * ΔT
Values of c for water and copper:
c_water = 4.19e3 J/kg°C
c_copper = 0.39e3 J/kg°C
Conservation of energy: Q_water + Q_copper + Q_material = 0
Calculations:
0.200 * 4.19e3 * (26.1 - 19.0) + 0.150 * 0.39e3 * (26.1 - 19.0) + 0.085 * c_material * (26.1 - 100) = 0
5949.8 + 415.35 - 6.2815c = 0
6.2815c = 6365.15
c_material = 1013.32 J/kg°C
Learn more about specific heat capacity here:
https://brainly.com/question/29792498
#SPJ6
The question probable may be;
The complete question is: A laboratory technician drops a 0.0850-kg sample of unknown solid material, at 100.0∘C, into a calorimeter. The calorimeter can, initially at 19.0∘C, is made of 0.150 kg of copper and contains 0.200 kg of water. The final temperature of the calorimeter can and contents is 26.1∘C. Compute the specific heat of the sample.
40 POINTS How is a salt created? (3 points)
Answer:
When cation of metal and anion of non metal are combine they form salt.
Explanation:
When cation of metal and anion of non metal are combine they form salt. Consider the example of sodium chloride.
Sodium chloride is salt and also an ionic compound. The electronegativity of chlorine is 3.16 and for sodium is 0.93. There is large difference is present. That's why electron from sodium is transfer to the chlorine. Sodium becomes positive and chlorine becomes negative ion. Both atoms are bonded together electrostatic attraction occur between anion and cations and form salt sodium chloride.
Salt is formed during the neutralization reaction of acid and base.
For example:
When sodium hydroxide and hydrochloric acid react they form sodium chloride and water.
NaOH + HCl → NaCl + H₂O
Answer:
salt is a rock
Explanation:
1. emitted from a cathode ray tube electrons 2. discovered the neutron nucleus 3. discovered the electron Dalton 4. postulated the quantum atom J. J. Thomson 5. discovered the proton Bohr 6. father of atomic theory Rutherford 7. location of most of the mass of the atom Chadwick
Answer:
1. Dalton..........Father of Atomic theory
2. Bohr..........Postulated the quantum atom
3. nucleus..........location of the most of the mass of the atom
4. Chadwick..........discovered the neutron
5. Rutherford..........discovered the proton
6. electrons..........emitted from a cathode-ray tube
7. J.J. Thomson..........discovered the electron
Explanation:
The question is incomplete.Here is the cmplete question.
Match these items.
1. Dalton...... emitted from a cathode-ray tube
2. Bohr.......... discovered the neutron
3. nucleus.......... discovered the electron
4. Chadwick........ postulated the quantum atom
5. Rutherford........... discovered the proton
6. electrons ............father of atomic theory
7. J. J. Thomson.............location of most of the mass of the atom
1) Dalton is the father of atomic theory
He proposed that matter comprises of indivisible particles called atoms. Atoms are the building block of a matter. All atoms of an element are identical. Atoms of different elements differ from each other in terms of size and mass.
2. Bohr postulated the quantum atom
He proposed that electrons revolve around the nucleus in orbits. Each orbit is labelled by an integer 'n’. This integer is the quantum number. Electrons can move between shells by emitting or absorbing energy.
3. Nucleus is the location of most of the mass of the atom
The entire mass (almost 99%) of atom is concentrated in the nucleus containing protons and neutrons. Electrons orbiting around have negligible mass compared the protons and neutrons.
4. Chadwick discovered the neutron.
In an experiment, Chadwick bombarded beryllium atoms with alpha rays. He noticed that beryllium emitted neutral rays as a result. Unlike gamma rays, the rays did not create photo electric effect when they hit charged electroscope. He concluded that they are neutrons instead.
5. Rutherford discovered the proton
In his famous gold foil experiment, he bombarded positively charged alpha rays to gold foil as saw a large proportion of them being deflected. He concluded that the atoms must have positively charged particles that caused the deflection.
6. Electrons are emitted from a cathode-ray tube
When electricity is passed through the cathode in the tube, electrons in the outermost orbit gain enough energy to break out from it
7. J. J. Thomson discovered the elections.
In the cathode-ray tube, Thompson observed that the rays emitted from the cathode are deflected towards to the positively charged plate. He concluded that cathode rays composed of negatively charged particles, i.e. electrons.
Answer:
Correct matches below.
Explanation:
Dalton - Father of Atomic Theory
Chadwick - Discovered the neutron
J.J Thomson - Discovered the electron
Bohr - Postulated the quantum atom
Rutherford - Discovered the proton
Nucleus - Location of most of the mass in the atom
Electrons - Emitted from a cathode-ray tube
Explain why metals conduct electricity in their solid forms, but ionic compounds do not.
Explanation:
Metals in their solid form contain free electrons( mobile in nature), these free electrons are responsible for electricity conduction in solids metals.
Whereas in ionic compounds ions are stationary and they do not conduct electricity, however, their when dissolved in water, their ions dissociate and they start conducting electricity.
"Ethanol, C 2H 5OH, is made from fermenting grain and can be blended with gasoline to make "gasohol." If the combustion of "gasohol" produces carbon dioxide and water, what is the coefficient of oxygen in the balanced equation?
Answer:
The coefficient of oxygen in the balanced equation is equal to 3.
Explanation:
The combustion reaction of ethanol in the "gasohol" produces carbon dioxide and water as follows:
CH₃CH₂OH + O₂ → CO₂ + H₂O (1)
To find the coefficient of oxygen in equation (1), we need to balance it. The balanced reaction is the next:
CH₃CH₂OH + 3O₂ → 2CO₂ + 3H₂O
In the balanced equation, we have the same number of carbon, hydrogen, and oxygen atoms in the products than in the reactants. Therefore, the coefficient of oxygen in the balanced equation is equal to 3.
I hope it helps you!
Final answer:
The coefficient of oxygen in the balanced chemical equation for the combustion of ethanol is 3.
Explanation:
The combustion of ethanol, C₂H₅OH, when it is blended with gasoline to make 'gasohol' involves a reaction with oxygen to produce carbon dioxide and water.
The balanced chemical equation for this combustion is C₂H₅OH(l) + 3O₂(g) --> 2CO₂(g) + 3H₂O(g).
Therefore, the coefficient of oxygen in the balanced equation is 3, indicating that three molecules of diatomic oxygen are required for the complete combustion of one molecule of ethanol.
Lighters are usually fueled by butane (c4h10). when 1 mole of butane burns at constant pressure, it produces 2658 kj of heat and does 3 kj of work.
Answer:
ΔE = -2661 KJ/mole
ΔH = -2658 KJ/mole
Explanation:
ΔH = q - PΔV
ΔE = q + w
First, to find ΔE:
The reaction PRODUCES 2658 kJ of h (q), and does 3 kJ of work (w).
2658 kJ(q) + 3 kJ(w) = 2661 kJ, BUT the reaction PRODUCES heat, which means ΔE is negative.
ΔE = -2661 KJ/mole
Second, to find ΔH:
ΔH = q - PΔV
ΔH = 2658 kJ(q) - PΔV
Now, the question states that butane burns at a constant pressure; that just translates to the pressure of the reaction is equal to 0.
ΔH = 2658 KJ(q) - (0)ΔV
ΔH = 2658 KJ - 0
ΔH = 2658 kJ, BUT, like before, the reaction PRODUCES heat, which also mean ΔH is negative.
ΔH = -2658 KJ/mole
I hope this helped! Have a nice week.
An 8.89 g sample of an aqueous solution of nitric acid contains an unknown amount of the acid. If 27.1 mL of 0.581 M potassium hydroxide is required to neutralize the nitric acid, what is the percent by mass of nitric acid in the mixture?
Answer:
The percent by mass of nitric acid in the mixture is 11.1 %
Explanation:
Step 1: Data given
Mass of HNO3 = 8.89 grams
Volume of KOH = 27.1 mL = 0. 0271 L
Molarity of KOH = 0.581 M
Step 2: The balanced equation
HNO 3 + KOH → KNO 3 + H 2 O
Step 3: Calculate the moles of KOH
Moles of KOH = molarity KOH * volume
Moles KOH = 0.581 M * 0.0271 L
Moles KOH = 0.0157 moles
Step 4: Calculate moles of HNO3
For 1 mol of KOH we need 1 mol of HNO3
For 0.0157 moles of KOH we need 0.0157 moles of HNO3
Step 5: Calculate mass of HNO3
Mass KOH = moles KOH * molar mass KOH
Mass KOH = 0.0157 moles * 63.01 g/mol
Mass KOH = 0.989 grams
Step 6: Calculate mass % HNO3 in sample
mass % = (0.989 grams / 8.89 grams)*100%
mass % = 11.1 %
The percent by mass of nitric acid in the mixture is 11.1 %
Problem 2: 1. Represent a molecule of 1-butene [1] 2. 1-Butene reacts with a molecule of bromine,Br2. (reaction 1) a. Is bromine polar or apolar? Explain [1] b. Write the equation for the reaction. Identify nucleophile and electrophile in the reaction. Show the mechanism of the reaction stepwise using curved arrows. Specify the type of reaction. [4] c. Why does the reaction take place with bromine? [2] d. What is the name of the main product? [1]
Answer:
See explanation below
Explanation:
The drawing of the molecule and mechanism, you can see it in the attached pictures.
Now, answering the theorical questions:
The 1-butene is like this:
CH2 = CH - CH2 - CH3
If this molecule reacts with bromine (Br2) the reaction and product formed is:
CH2 = CH - CH2 - CH3 + Br2 -----------> Br-CH2 - CH(Br) - CH2 - CH3
The product formed is called 1,2 - dibromo - butane, and the reaction with halides like bromine is called halogenation. In this case, alkenes halogenation, so, we become a alkene like the 1-butene with a halide like bromine to form an alkane with halides. This reaction is taking place in conditions of Sn1, although this is an addition (Two steps, see picture below for mechanism).
The bromine, has a high electronegativity (2.9) this is even bigger than the iodine (2.7), so, when the bromine acts as a nucleophile in a SN2 or SN1 reaction (like this one), bromine atom becomes slightly more negative, and iodine atom becomes slightly more positive, so strictly speaking, the molecule is slightly polar. When the difference of the electronegativities is below of 0.4, we can say that the molecule is non-polar.
Because of the explanation above, the reaction is taking place with bromine, because it has a higher electronegativity, even more than the chlorine, so the molecule is more polar and can have a better reaction with the 1-butene than the chlorine. Has a better nucleophyle attack and also, is a great leaving group.
The picture below will show the mechanism:
Identify the type of reaction and then balance the equation for each of the following reactions.
( Fill in the blank )
________ 1. ____ Al2O3 ____ Al + ____ O2
________ 2. ____ Mg + ____ HNO3 -> ____ Mg(NO3)2 + ____ H2
________ 3. ____ C6H6 + ____ O2 -> ____ CO2 + ____ H2O
________ 4. ____ Ag + ____ S -> ____ Ag2S
________ 5. ____ Ca(OH)2 + ____ H3PO4 -> ____ Ca3(PO4)2 + ___HOH
Answer:
The answer to your question is below
Explanation:
There are 4 types of chemical reactions:
- Synthesis is when two elements or compounds form only one compound.
- Decomposition is when 1 compound is broken into 2 or more products.
- Single replacement is when one element is replaced by another element.
- Double replacement is when the cations of two compounds are interchanged.
1.- Decomposition 2 Al₂O₃ ⇒ 4 Al + 3O₂
2.- Single replacement Mg + 2HNO₃ ⇒ Mg(NO₃)₂ + H₂
3.- Combustion 2C₆H₆ + 15O₂ ⇒ 12CO₂ + 6H₂O
4.- Synthesis 2Ag + S ⇒ Ag₂S
5.- Double replacement 3Ca(OH)₂ + 2H₃PO₄ ⇒ Ca₃(PO₄)₂ + 6 H₂O
Draw the product of the following reaction between a ketone and an alcohol.
Answer:
The product of the reaction between a ketone and an alcohol is initially a hemiketal which yields a ketal on further reaction with another alcohol molecule.
The structure is found in the attachment.
Explanation:
This reaction is a nucleophilic addition to the carbonyl group. In organic chemistry, a nucleophilic addition reaction is an addition reaction where a chemical compound with an electron-deficient or electrophilic double or triple bond, a pi (π) bond, reacts with electron-rich reactant, termed a nucleophile, with the elimination of the double bond and creation of two new single, or sigma (σ), bonds.
In the reaction between a ketone and an alcohol, the carbonyl group of the ketone serves as the electrophile while the hydroxyl group of the alcohol is the nucleophile. The first product is known as a hemiketal because a single alcohol group has been aded to the carbonyl group of the ketone. Further nucleophilic additon of an alcohol group initiated by the presence of an acid e.g hydrochloric acid, results in the formation of a ketal which has two alcohol group added to the original ketone.
Final answer:
The reaction between a ketone and an alcohol can produce a hemiketal or ketal, depending on the reaction conditions and the excess of alcohol. A hemiketal is formed when the alcohol reacts with the ketone to form a new carbon-oxygen bond, while a ketal is formed when a second molecule of alcohol reacts to convert the hemiketal into a stable compound.
Explanation:
In the reaction between a ketone and an alcohol, the product formed is called a hemiketal or ketal, depending on the reaction conditions and the presence of excess alcohol. A hemiketal is formed when the alcohol reacts with the ketone to form a new carbon-oxygen bond, while a ketal is formed when a second molecule of alcohol reacts to convert the hemiketal into a stable compound.
For example, if we take the ketone acetone (CH3C=O) and react it with ethanol (CH3CH2OH), we can form a hemiketal:
CH3C(OC2H5)(OH)
If we add excess ethanol, the hemiketal can react with a second molecule of ethanol to form a ketal:
CH3C(OC2H5)2
The reaction can also occur between other ketones and alcohols, resulting in the formation of different hemiketals or ketals.
Given the chemical formula, KNO3, what is the percent nitrogen in the compound?
A) 13.86%
B) 14.01%
C) 38.36%
D) 47.48%
please help
Answer:
The answer to your question is letter A
Explanation:
Process
1.- Calculate the molar mass of KNO₃
KNO₃ molecular mass = 39.1 + 14.01 + (3 x 16)
= 39.1 + 14.01 + 48
= 101.11 g
2.- Use a rule of three to find the percent of nitrogen
101.11 g of KNO₃ --------------- 100%
14.01 g of N --------------- x
x = (14.01 x 100) / 101.11
x = 13.86%
Which statements accurately describe nonmetals? Select all that apply. Nonmetals are moldable and easily shaped. Most nonmetals are gases at room temperature. Nonmetals fracture easily under pressure. Most nonmetals are liquids at room temperature.
Most nonmetals are gases at room temperature. This statement accurately describe nonmetals
Nonmetals are periodic table elements that lack the characteristic properties of metals. They can be found in the upper right-hand corner of the periodic table, to the right of the zigzag line that divides metals and nonmetals. Nonmetals are easily formed and moldable. False; nonmetals are brittle and typically break when moulded or shaped. At normal temperature, the majority of nonmetals are gases. That is correct.
Oxygen, nitrogen, and carbon dioxide are a few examples. Under pressure, nonmetals easily fracture. True, however nonmetals are often brittle in their solid state and hence cannot resist pressure without deforming. At room temperature, the majority of nonmetals are liquids. This is not correct. The majority of nonmetals do not exist in liquid form. They exist in both gaseous and solid states.
To know more about non metals, here:
https://brainly.com/question/28650063
#SPJ3
The amide bond in a protein has a negative ΔG°' of hydrolysis under physiological conditions in the cell. In other words, the peptide bond is thermodynamically unstable, yet proteins are an important component of the cell and do not just fall apart sponstaneously. Why?
Answer:
The hydrolysis rate is significantly low because the energy of the transition state for hydrolysis is significantly high
Explanation:
In the given problem, It was stated that the peptide bond is not stable thermodynamically. Peptide bonds are typically formed between molecules with carboxyl groups and molecules with amino groups. Therefore, it can be inferred that the hydrolysis rate is significantly low because the energy of the transition state for hydrolysis is significantly high.
Use the problem below to answer the question: 34 grams of carbon reacted with an unlimited amount of H2O. The reaction is: C + H2O → CO + H2 The atomic mass of C is 12.01 g/mole. The atomic mass of H2 is 2.016 g/mole. Finish the problem by choosing the correct format for dimensional analysis.
Final answer:
In this problem, 1 mole of CO₂ is produced for every mole of carbon atoms and 1 mole of H₂O is produced for every 2 moles of hydrogen atoms. By using these ratios, the masses of carbon and hydrogen in the original sample can be calculated from the masses of CO₂ and H₂O, and their molar masses.
Explanation:
Upon combustion, 1 mol of CO₂ is produced for each mole of carbon atoms in the original sample. Similarly, 1 mol of H₂O is produced for every 2 mol of hydrogen atoms present in the sample. The masses of carbon and hydrogen in the original sample can be calculated from these ratios, the masses of CO₂ and H₂O, and their molar masses. Because the units of molar mass are grams per mole, we must first convert the masses from milligrams to grams: