Answer:
0.72 M
Explanation:
Given data
Initial volume of the H₂SO₄ solution (V₁): 200 mLVolume of water added (VH₂O): 300 mLInitial concentration of the H₂SO₄ solution (C₁): 1.8 MStep 1: Calculate the final volume (V₂)
The final volume of the solution is equal to the sum of the initial volume of the solution and the volume of water.
[tex]V_2 = V_1 + VH_2O = 200 mL + 300mL = 500mL[/tex]
Step 2: Calculate the concentration of the diluted solution (C₂)
We will use the dilution rule.
[tex]C_1 \times V_1 = C_2 \times V_2\\C_2 = \frac{C_1 \times V_1}{V_2} = \frac{1.8M \times 200mL}{500mL}= 0.72 M[/tex]
Devin is watching two runners at the park. The runners are the same weight, and the speed that each of them is running is not changing.
Devin wants to know which runner has the most energy of motion. What would he need to find out about the runners in order to determine this?
Answer:
Reeeeeeeeeerereeeee
Reeeee reee reee ree ree re
Answer:
the speed of which they are running.
Explanation:
what is the best definition of nuclear fusion
Answer:
A nuclear fusion is a nuclear reaction in which atomic nuclei of low atomic number fuse to form a heavier nucleus with the release of energy.
Answer:
Nuclear fusion is the joining of two or more nuclei into one nucleus
Explanation:
ap3x approved
10.3 5-Methylcyclopentadiene undergoes homolytic bond cleavage of a bond to form a radical that exhibits five resonance structures. Determine which hydrogen atom is abstracted and draw all five resonance structures of the resulting radical.
Answer:
Explanation:
CHECK THE FILE BELOW FOR THE ANSWER
Methanol, ethanol, and n−propanol are three common alcohols. When 1.00 g of each of these alcohols is burned in air, heat is liberated as indicated. Calculate the heats of combustion of these alcohols in kJ/mol. (a) methanol (CH3OH), −22.6 kJ kJ/mol (b) ethanol (C2H5OH), −29.7 kJ Enter your answer in scientific notation. × 10 kJ/mol (c) n−propanol (C3H7OH), −33.4 kJ Enter your answer in scientific notation. × 10 kJ/mol
The heats of combustion for methanol, ethanol, and n-propanol, when expressed in kJ/mol, are -0.710 × 10³ kJ/mol, -0.644 × 10³ kJ/mol, and -0.56 × 10³ kJ/mol, respectively. This shows that the amount of heat liberated decreases as the molecular weight of the alcohol increases.
Explanation:The heat of combustion of a substance is defined as the amount of heat energy released when 1 mole of a substance is completely burned in oxygen. Here, the heats of combustion for methanol (CH3OH), ethanol (C2H5OH), and n−propanol (C3H7OH) are given in kJ/g, and we need to convert them into kJ/mol.
To do this conversion, you first need to find the molar mass of each alcohol. You can do this by adding up the atomic masses of each element in the molecule.
Using the atomic masses in g/mol from the periodic table, we have: Methanol (CH3OH): 12.01 + 3(1.01) + 16 + 1.01 = 32.05 g/mol; Ethanol (C2H5OH): 2(12.01) + 5(1.01) +16 + 1.01=46.07 g/mol; n-Propanol (C3H7OH): 3(12.01) + 7(1.01) + 16 + 1.01 = 60.1 g/mol.
Next, divide the heat of combustion given in kJ/g by the molar mass calculated in g/mol to obtain the heat of combustion in kJ/mol:
Methanol: -22.6 kJ/g ÷ 32.05 g/mol = -0.710 × 10³ kJ/mol (scientific notation)
Ethanol: -29.7 kJ/g ÷ 46.07 g/mol = -0.644 × 10³ kJ/mol (scientific notation)
n-Propanol: -33.4 kJ/g ÷ 60.1 g/mol = -0.56 × 10³ kJ/mol (scientific notation)
So, the heats of combustion for the alcohols are: Methanol: -0.710 × 10³ kJ/mol, Ethanol: -0.644 × 10³ kJ/mol, and n-Propanol: -0.56 × 10³ kJ/mol. As you can see, the amount of heat liberated per mole decreases as the molecular mass of the alcohol increases.
Learn more about Heat of combustion here:https://brainly.com/question/38340398
#SPJ12
a) A 25.3 mg sample of sodium carbonate is present in a container.
i) Write the formula of sodium carbonate:
Answer:
Formula of sodium carbonate is [tex]Na_{2}CO_{3}[/tex].
Explanation:
Sodium carbonate is an ionic compound consists of [tex]Na^{+}[/tex] and [tex]CO_{3}^{2-}[/tex] ions.
In a formula unit of sodium carbonate, there should be two [tex]Na^{+}[/tex] ions and one [tex]CO_{3}^{2-}[/tex] ion to maintain charge neutrality.
In general, formula of an ionic compound consists of [tex]A^{x+}[/tex] and [tex]B^{y-}[/tex] ions is written as : [tex]A_{y}B_{x}[/tex] ([tex]x\neq y[/tex]) and AB ([tex]x= y[/tex])
If x or y is equal to 1 then it is not written explicitly in formula.
So, formula of sodium carbonate = [tex]Na_{2}CO_{3}[/tex]
Final answer:
The formula for sodium carbonate is Na₂CO₃; it is used for various purposes in chemical experiments such as stoichiometry, titration, and hydration analysis.
Explanation:
The formula for sodium carbonate is Na₂CO₃. In the context of these questions, sodium carbonate is often used in stoichiometric calculations, titrations, determining solubility of compounds, and calculating the formula of a hydrated compound by heating the sample to remove water of hydration. A sample of sodium carbonate is specified in different quantities across various experimental setups, which highlights its versatile use in chemical reactions and in the preparation of specific molar concentration solutions.
Which option is a solution that is 20% (v/v) methanol in water?
Answer:
Explanation:
1.The solution contains 20 mL of methanol and 100 mL of water.
2.The solution contains 20 mL of methanol and 80 mL of water.
3.The solution contains 20 g of methanol and 100 mL of water.
4.The solution contains 20 g of methanol and 80 mL of water.
Answer:
20 % volume/volume methanol in water contains 20 mL of methanol and 80 mL of water.
Explanation:
Total volume of the solution= 20 + 80 = 100 mL
Which compound contains a triple bond?
Answer: C2H2
Explanation: Because each of the lines represent one bond, and because there are three lines (bonds) between the carbons, it means that they are bonded by three bonds, also known as a triple bond.
The triple bond that we have is shown by image D.
What is a triple bond?Two atoms share three pairs of electrons in a triple bond, making a total of six electrons present in the bond. Multiple bonds are formed between the atoms as a result of the sharing of electrons, offering a high degree of stability.
Two pi (π) bonds and a sigma (σ) bond define a triple bond. Atomic orbitals overlap head-on to form the sigma bond, whereas side-to-side overlap produces the two pi bonds.
Learn more about triple bond:https://brainly.com/question/35909332
#SPJ3
A weather balloon has a volume of 200.0 L at a pressure of 760 mm Hg. As it rises, the pressure decreases to 282 mm Hg. What is the new volume of the balloon? (Assume constant temperature)
Answer:
The new volume of the balloon is 539 L
Explanation:
As the volume increases, the gas particles (atoms or molecules) take longer to reach the walls of the container and therefore collide less times per unit time against them. This means that the pressure will be less because it represents the frequency of gas strikes against the walls. In this way, pressure and volume are related, determining Boyle's law that says:
"The volume occupied by a given gas mass at constant temperature is inversely proportional to the pressure"
Boyle's law is expressed mathematically as:
Pressure * Volume = constant
o P * V = k
Having an initial state 1 and an final state 2 will be fulfilled:
P1 * V1 = P2 * V2
So, in this case, you know:
P1= 760 mmHgV1= 200 LP2= 282 mmHgV2= ?Replacing:
760 mmHg*200 L= 282 mmHg*V2
Solving:
[tex]V2=\frac{760 mmHg*200 L}{282 mmHg}[/tex]
V2=539 L
The new volume of the balloon is 539 L
Using Boyle's Law, we calculated the new volume of the weather balloon as approximately 538.7 L when the pressure decreases from 760 mm Hg to 282 mm Hg at constant temperature.
To find the new volume of the weather balloon when the pressure changes, we can use Boyle's Law, which states that the product of the initial pressure and volume is equal to the product of the final pressure and volume, assuming constant temperature.
The formula is:
P₁V₁= P₂V₂
Given: P₁ = 760 mm Hg, V₁ = 200.0 L, P₂ = 282 mm Hg
We need to find V₂.
Rearranging the formula to solve for V₂:
V₂= (P₁V1₁ / P₂)
Substituting the given values:
V₂ = (760 mm Hg * 200.0 L) / 282 mm Hg
V₂ = 152000 mm Hg L / 282 mm Hg
V₂ ≈ 538.7 L
Therefore, the new volume of the balloon is approximately 538.7 L.
Which will not appear in the equilibrium constant expression for the reaction below?
H2O(g) + C(s) +
H2() + CO(g)
[H20]
[C]
[H2]
[CO]
Concentration of C, [C] will not appear in the equilibrium constant expression for the reaction.
What is meant by equilibrium constant ?Ratio of product of concentration of the products to the product of concentration of reactants.
Here,
H₂O(g) + C(s) ⇆ H₂ + CO
The expression for equilibrium constant for the reaction is given by,
K = [H₂] [CO]/ [H₂O] [C]
where K is the equilibrium constant of the reaction.
We know, the concentration of solids does not change in a reaction and therefore the concentration is taken as unity.
In the given reaction, since the reactant C is in solid form, its concentration is taken as 1.
So, K = [H₂] [CO]/ [H₂O]
As a result, the concentration of C, [C] will not be included in the expression for equilibrium constant.
Hence,
Concentration of C, [C] will not appear in the equilibrium constant expression for the reaction.
To learn more about equilibrium constant, click:
https://brainly.com/question/19671384
#SPJ7
In the reaction H2O(g) + C(s) → H2(g) + CO(g), the component that does not appear in the equilibrium constant expression is C(s), carbon in its solid form. This is because pure solids do not change concentration and do not affect the state of equilibrium.
Explanation:To answer which component will not appear in the equilibrium constant expression for the reaction H2O(g) + C(s) → H2(g) + CO(g), we need to understand how equilibrium expressions are formed. The equilibrium constant expression for a reaction is based on the balanced chemical equation and includes the concentrations of the gaseous and aqueous species, raised to the power of their coefficients in the balanced equation. Pure solids and pure liquids are not included in the expression because their concentrations don't change during the reaction.
In the given reaction, C(s), which is carbon in its solid form, does not appear in the equilibrium constant expression because as a pure solid, its concentration is constant and does not affect the state of equilibrium. Therefore, the equilibrium constant expression for this reaction would be K = [CO][H2], excluding both the water (H2O) because it is in gaseous form and included in the expression, and the carbon (C) because it is a solid.
A hydrogen atom transitions from the n = 6 excited state to the n = 3 excited state, emitting a photon. a) What is the energy, in electron volts, of the electron in the n = 6 state? How far from the nucleus is the electron? b) What is the energy, in electron volts, of the photon emitted by the hydrogen atom? What is the wavelength of this photon? c) How many different possible photons could the n = 6 electron generate by dropping to a lower level (not just the n = 3 state)? d) After reaching the n = 3 state, the electron absorbs an photon with an energy of 50 eV, which ionizes the hydrogen atom (i.e., the electron reaches n=infinity). What is the wavelength of the electron after it is ejected from the hydrogen ato
Answer:
Explanation:
a ) energy, in electron volts, of the electron in the n = 6 state
= -13.6 / 6² eV
= - .378 eV .
b )
energy of n=3
= - 13.6 / 3²
= - 1.5111 eV
Difference = - .378 + 1.511
= 1.133 eV
the energy, in electron volts, of the photon emitted by the hydrogen atom
= 1.133 eV
c ) No of possible photons
= 6C₂
= 15
d) energy at n = 3
= - 1.5111 eV
50 eV energy is added to it so its energy
= 50 - 1.5111 eV
= 48.4889 eV .
From De broglie wavelength formula
λ = h / √ mE , m is mass of electron , E is kinetic energy h is plank's constant.
λ = 6.6 x 10⁻³⁴ / √ ( 9.1 x 10⁻³¹ x 48.4889 x 1.6 x 10⁻¹⁹ )
= 6.6 x 10⁻³⁴ / 26.57 x 10⁻²⁵
= .248 x 10⁻⁹ m
= .248 nm .
which term is defined as the sum of protons and neutrons in an atomic number?
a) charge number
b) mass number
c) atomic number
d) balance number
Answer: B) Mass Number
Answer:
C. Mass Number
Explanation:
took the test and got 100% so i know its right
Write the balanced half‑reaction that occurs at the anode in a hydrogen‑oxygen fuel cell in which an acidic electrolyte is used. A hydrogen fuel cell. H 2 flows into the cell at the negative electrode. O 2 flows into the cell at the positive electrode. Electrons travel through an external circuit from the negative to the positive electrode. Between the two electrodes is an electrolyte solution. Arrows in the electrolyte point from the negative electrode to the positive electrode. anode half-reaction: Write the balanced half‑reaction that occurs at the cathode in a hydrogen‑oxygen fuel cell in which an acidic electrolyte is used. cathode half-reaction: Write the balanced overall cell reaction. overall cell reaction:
Answer:
Cathode: O2 + 4H+ +4e--------> 2H20
Anode: 2H2 -4e- ---------> 4H+
Overall: 2H2 + O2 → 2H2O
Explanation:
A hydrogen-oxygen fuel cell is an alternative cell to rechargeable cells and batteries. In this cell, hydrogen and oxygen is used to produce voltage and water is the only byproduct.
At the cathode (positive electrode):
O2 + 4H+ +4e--------> 2H2O
At the anode (negative electrode);
2H2 -4e- ---------> 4H+
Adding the two half reactions we have:
2H2 + O2 + 4H+ + 4e- -----------> 2H2O + 4H + 4e-
The overall reaction after cancelling out the like terms in the reaction is:
2H2 (g) + O2 (g) --------> 2H2O (l)
The hydrogen fuel cell is an electrochemical cell in which hydrogen is oxidized and oxygen is reduced.
A fuel cell is an electrochemical cell in which oxygen enters into the positive cathode and hydrogen flows into the negative cathode. Hydrogen is oxidized and oxygen is reduced during the electrochemical reaction.
At the negative electrode;
2H2(g) -----> 4H^+(aq)+ 4e
At the positive electrode;
O2(g) + 4H^+(aq) + 4e -----> 2H2O(l)
The overall reaction is;
2H2(g) + O2(g) -----> 4H^+(aq) + 2H2O(l)
Learn more: https://brainly.com/question/14191541
A 35.161 mg sample of a chemical known to contain only carbon, hydrogen, sulfur, and oxygen is put into a combustion analysis apparatus, yielding 62.637 mg of carbon dioxide and 25.641 mg of water. In another experiment, 31.321 mg of the compound is reacted with excess oxygen to produce 13.54 mg of sulfur dioxide. Add subscripts to the formula provided to correctly identify the empirical formula of this compound. Do not change the order of the elements.
Answer:
The empirical formulae is C6H12S02
Explanation:
1. First we need to obtain the mass of each element in the sample and compound formed
Carbon = (62.637 mg * 12.011 g/mol / 44.009 g/mol) = 17.094 mg of Carbon
Hydrogen = ( 25.641 mg * (2 *1..008 g/mol) / 18.015 g/mol) = 2.869 mg of Hydrogen
Sulphur = (13.54 mg * 32.066 g/mol / 64.066 g/mol) = 6.777 mg of Sulphur
2. Next is to determine the percentage composition. Here we divide the respective mass by the mass of the sample
Carbon = 17.094 / 35.161 * 100 = 48.62 %
Hydrogen = 2.869/ 35.161 *100 = 8.16 %
Sulphur = 6.777/ 31.321 *100 = 21.64 %
Oxygen = (100 - (48.62 + 8.16 + 21.64)) = 21.58 %
3. Next is to divide the mass assuming there are 100 mg by the respective atomic masses to obtain the number of moles
Carbon = 48.62 / 12.011 = 4.048 mol
Hydrogen = 8.16 / 1.008 = 8.095 mol
Sulphur = 21.64 / 32.066 = 0.675 mol
Oxygen = 21.58 / 16.000 = 1.348 mol
Next is to divide by the smallest value
Carbon = 4.048/ 0.675 =5.997 = 6
Hydrogen = 8.095 / 0.675 =11.993 =12
Sulphur = 0.675/ 0.675 = 1
Oxygen = 1.348 / 0.675 = 1.997 = 2
So therefore the empirical formulae of the sample is C6H12SO2
Chlorophenols impart unpleasant taste and odor to drinking water at concentrations as low as 5 mg/m3. They are formed when the chlorine dis- infection process is applied to phenol-containing waters. What is the threshold for unpleasant taste and odor in units of (a) mg/L, (b) mg/L, (c) ppmm, and (d) ppbm
Answer:
See explaination
Explanation:
Chlorine’s disinfection properties have helped improve the lives of billions of people around the world. Chlorine also is an essential chemical building block, used to make many products that contribute to public health and safety, advanced technology, nutrition, security and transportation.
Please kindly check attachment for the step by step solution of the given problem.
The threshold for unpleasant taste and order in the respective units are;
A) 0.005 mg/L
A) 0.005 mg/LB) 5 μg/L
A) 0.005 mg/LB) 5 μg/LC) 0.005 ppm
A) 0.005 mg/LB) 5 μg/LC) 0.005 ppmD) 5 ppb
We are given the concentration of chlorophenols as; M = 5 mg/m³
A) Converting mg/m³ to mg/L means that;
1 mg/m³ = 0.001 mg/L. Thus;
5 mg/m³ = (5 × 0.001)/1
>> 0.005 mg/L
B) Converting mg/m³ to μg/L means that;
1 mg/m³ = 1 μg/L
Thus; 5 mg/m³ = 5 × 1/1 μg/L
>> 5 μg/L
C) Converting mg/m³ to ppm gives;
1 mg/m³ = 0.001 ppm
Thus;
5 mg/m³ = (5 × 0.001)/1 ppm
>> 0.005 ppm
D) Converting mg/m³ to ppb gives;
1 mg/m³ = 1 ppm
Thus;
5 mg/m³ = 5 × 1/1 ppb
>> 5 ppb
Read more at; https://brainly.com/question/14703996
Compared to the ideal angle, you would expect the actual angle between the bromine-oxygen bonds to be
The expected bond angle between bromine and oxygen, based on hybridization and molecular geometry, would likely be slightly less than the ideal tetrahedral angle of 109.5°, due to electron repulsion effects.
Explanation:The bond angle between bromine and oxygen can be predicted using the concepts of hybridization and molecular geometry. If bromine and oxygen were to form a molecule similar to water (H₂O), one might expect a tetrahedral geometry because the valence orbitals of oxygen consist of one 2s orbital and three 2p orbitals. These combine during hybridization to form four hybrid orbitals that point toward the corners of a tetrahedron. The ideal bond angle for a tetrahedron is 109.5°. However, due to the effects of lone pair repulsion, the actual bond angle would likely be less, similar to how the H-O-H bond angle in water is experimentally found to be 104.5°.
Learn more about Bond Angle here:https://brainly.com/question/13782150
#SPJ12
The actual angle between the bromine-oxygen bonds in BrO3⁻ is expected to be less than 120° due to the presence of the lone pair on the central bromine atom.
The ideal bond angle for a sp³ hybridized central atom is 109.5°. However, the presence of lone pairs on the central atom can distort the bond angles. Lone pairs are more electron-rich than bonding pairs, so they repel the bonding pairs more strongly. This repulsion causes the bond angles to decrease.
In the case of BrO3⁻, the central bromine atom is sp³ hybridized and has one lone pair. The lone pair will repel the two bonding pairs between the bromine and oxygen atoms. This repulsion will cause the bond angles between the bromine and oxygen atoms to decrease from the ideal angle of 120°.
The actual bond angle between the bromine-oxygen bonds in BrO3⁻ has been measured to be 107.1°. This is slightly less than the ideal angle of 120°, as expected.
For more such information on: angle
https://brainly.com/question/1309590
#SPJ6
The question probable may be:
Compared to the ideal angle 120 ,the central atom Br lone pair 1 How you would expect the actual angle between the bromine-oxygen bonds to be
What’s the largest number?
○ 2 x 10^1
○ 5 x 10^3
○ 3 x 10^4
○ 7 x 10^-6
Answer:
3 x 10^4
Explanation:
○ 2 x 10^1 = 20
○ 5 x 10^3 = 5,000
○ 3 x 10^4 = 30,000
○ 7 x 10^-6 = 7/1,000,000
Answer:
kpkgcv gvpspmspabfdpmt
ball has a volume of 5.27 liters and is at a temperature of 27.0°C. A pressure gauge attached to the ball reads 0.25 atmosphere. The atmospheric pressure is 1.00 atmosphere.
Answer:
The absolute pressure inside the ball is 1.25atm.
Explanation:
Given-
Volume, V = 5..27L
Temperature, T = 27°C
Gauge Pressure, Pg = 0.25 atm
Atmospheric pressure, Patm = 1 atm
Absolute pressure, Pabs = ?
We know,
Therefore, absolute pressure inside the ball is 1.25atm.
Answer:
The absolute pressure inside the ball is 1.25 atmospheres.
The ball contains 0.267 moles of air
Explanation:
Compare the number of valence electrons for each to whether or not they donate or receive electrons
Answer:
Valency electrons is the number outermost electron present in atom of an element . The valency electron of an atom determines the kind of bonding an element undergoes. The valency electrons determines whether an atom of element will either donate electrons or receive electrons.
Explanation:
Valency electrons is the number outermost electron present in atom of an element . The valency electron of an atom determines the kind of bonding an element undergoes. The valency electrons determines whether an atom of element will either donate electrons or receive electrons.
Elements donates or receive electron to attain or fulfill the octet rule and this account for the stability. Most metallic elements donates electrons and because they have few valency electrons , this also contributes to their ability to loose electrons easily . Metallic elements like sodium, magnesium, calcium etc loose electrons during bonding with other non metals. When metals loose electrons they form cations
Non metallic element have high number of valency electron and they tend to receive electrons from metallic elements to attain stability . When they gain electron they form anions.
An example of bonding that involves donating and receiving are bonding between Na and Cl atoms to form NaCl . The metallic sodium loose one electron while the chlorine atom gains one electron to attain the octet rule.
When ignited, solid ammonium dichromate decomposes in a fiery display. This is the reaction for a "volcano" demonstration. The decomposition produces nitrogen gas, water vapor, and chromium(III) oxide. The temperature is constant at 25°C.
Substance H0f (kJ/mol) S0 (kJ/mol . K)
a. Cr2O3 (g) -1140 0.0812
b. H2O (I) -242 0.1187
c. N2 (g) 0 0.1915
d. (NH4)2 Cr2O7 - 22.5 0.1137
Answer:
Your question is half unfinished, regarding the chromium III oxide the correct option that expresses the inorganic formula of said compound is "A"
Explanation:
In the reaction an initial salt reacts giving as product water vapor, nitrogen gas and an oxide that is chromium oxide.
Chromium oxide is an oxide that adopts the structure of corundum, compact hexagonal. It consists of an anion oxide matrix with 2/3 of the octahedral holes occupied by chromium. Like corundum, Cr2O3 is a tough, brittle material.
It is used as a pigment, green in color.
Consider these generic half-reactions. Half-reaction E° (V) X+(aq)+e−⟶X(s) 1.52 Y2+(aq)+2e−⟶Y(s) −1.17 Z3+(aq)+3e−⟶Z(s) 0.84 Identify the strongest oxidizing agent. X+ Y2+ X Z Y Z3+ Identify the weakest oxidizing agent. X Z3+ Y Y2+ Z X+ Identify the strongest reducing agent. Z3+ X+ Y2+ Z X Y Identify the weakest reducing agent. Y Z X+ X Y2+ Z3+ Which substances can oxidize Z ?
The strongest reducing agent Y2+ and the weakest reducing agent is X+.
The more positive the reduction potential of a specie is, the better it serves as an oxidizing agent and is better able to accept electrons. In a nutshell, the specie that has a higher positive reduction potential is a better oxidizing agent. The reducing agent is the specie that has the most negative reduction potential.
Looking the half reaction equations;
X+(aq)+e−⟶X(s) 1.52 VY2+(aq)+2e−⟶Y(s) −1.17 V Z3+(aq)+3e−⟶Z(s) 0.84 VWe can see that the strongest oxidizing agent is X+, the weakest oxidizing agent is Y2+, the strongest reducing agent Y2+ and the weakest reducing agent is X+.
Learn more: https://brainly.com/question/14191541
Final answer:
The strongest oxidizing agent is Y2+(aq), the weakest oxidizing agent is X+(aq), the strongest reducing agent is Z3+(aq), the weakest reducing agent is Y(s), and substances with a higher reduction potential than Z3+(aq) can oxidize Z.
Explanation:
The strongest oxidizing agent can be identified by looking at the reduction potentials of the half-reactions. The half-reaction with the highest reduction potential is Y2+ → Y(s), with a reduction potential of -1.17 V. Therefore, Y2+(aq) is the strongest oxidizing agent.
The weakest oxidizing agent can be identified by looking at the reduction potentials of the half-reactions. The half-reaction with the lowest reduction potential is X+(aq) → X(s), with a reduction potential of 1.52 V. Therefore, X+(aq) is the weakest oxidizing agent.
The strongest reducing agent can be identified by looking at the reduction potentials of the half-reactions. The half-reaction with the highest reduction potential is Z3+(aq) → Z(s), with a reduction potential of 0.84 V. Therefore, Z3+(aq) is the strongest reducing agent.
The weakest reducing agent can be identified by looking at the reduction potentials of the half-reactions. The half-reaction with the lowest reduction potential is Y(s) → Y2+(aq), with a reduction potential of -1.17 V. Therefore, Y(s) is the weakest reducing agent.
Substances that have a higher reduction potential than Z3+(aq), which is 0.84 V, can oxidize Z.
Pure substances cannot be separated by physical means into simpler substances. True or False?
Answer:
true
Explanation:
Bison are found in grasslands.
They spend much of their time in herds eating grasses and other small plants.
What kind of teeth do bison likely have?
Answer: Broad, flat teeth for grinding.
Explanation:
Bison are large herbivorous mammals. These belong to the family of Bovidae. They create habitat on the Great Plains and grassland for many different species. Bison are called a keystone species. As the bison forage they cause aeration of soil. This promotes plant growth. They have broad, and flat teeth which help them to grind food. These mammals appear in herd which helps in maintaining a balanced ecosystem.
Consider the following reaction at equilibrium. What effect will adding 1.4 mole of He to the reaction mixture have on the system? 2 H2S(g) + 3 O2(g) ⇌ 2 H2O(g) + 2 SO2(g) Consider the following reaction at equilibrium. What effect will adding 1.4 mole of He to the reaction mixture have on the system? 2 H2S(g) + 3 O2(g) ⇌ 2 H2O(g) + 2 SO2(g) The reaction will shift to the left in the direction of reactants. No effect will be observed. The reaction will shift to the right in the direction of products. The equilibrium constant will increase. The equilibrium constant will decrease.
Adding 1.4 moles of He to the reaction mixture will have no effect on the equilibrium of the system.
Explanation:Adding 1.4 moles of He to the reaction mixture will have no effect on the system. The equilibrium of the reaction will not shift to the left or right, and there will be no change in the equilibrium constant. This is because He is considered an inert gas and does not participate in the reaction.
Learn more about Effect of adding He to a reaction mixture here:https://brainly.com/question/16201332
#SPJ12
Click to review the online content. Then answer the question(s) below, using complete sentences. Scroll down to view additional questions.
Online Content: Site 1
What factors can contribute to the process of desertification? (Site 1)
Answer:
Some of the factors include:
i. climate change
ii. urbanization
iii. overgrazing
iv. deforestation
v. natural disasters e.g yearly occurrence of wild fire in Austrailian forests
vi. soil erosion
Explanation:
Desertification is a process by which a fertile land degenerates into a desert due to some activities. These activities can either be natural or due to human activities, causing a land to become a desert. It has major effects on plants and animals (either domestic, wild or human).
In the world today, desertification is majorly caused by overgrazing and climate change. But other factors that can contribute to the process of desertification are; soil erosion, urbanization, deforestation, natural disasters etc.
Answer:
There are several reasons why the number of snow leopards is decreasing. Historically, and occasionally still today, snow leopards were hunted for their thick, soft fur.Other times snow leopards are killed by ranchers when the leopards attack their livestock. Humans now use some of the snow leopard’s habitat for farming and mining. This can make the snow leopards or their prey move to different habitats. Conservation groups are working to protect snow leopards and their habitat. Because of this the leopard species has decreased significantly.
Explanation:
Got 100%
Which process is a chemical change?
TIL
00
burning a match
boiling water
melting ice
O breaking glass
Answer:
Burning a match is a chemical change while the rest are physical changes.
Explanation:
Burning a match represents a chemical change, where a substance transforms into new substances with distinct chemical properties. In contrast, boiling water, melting ice, and breaking glass are examples of physical changes, altering the substance's form but not its identity.
Explanation:Among the given options, burning a match is a chemical change. A chemical change is a process that involves a substance changing into a new substance with different chemical properties. In this case, when a match is burned, it undergoes a chemical reaction leading to the formation of new substances such as heat, light, water vapor, and carbon dioxide, which were not there before the match was lit. On the other hand, boiling water, melting ice, and breaking glass are all examples of physical changes, which involve changes in the form of a substance but do not change the identity of the substance itself.
Learn more about Chemical Change here:https://brainly.com/question/23693316
#SPJ5
Which is an example of a beneficial mutation?
Answer:
b.one that results in lighter flower petal colors without changing the plant’s ability to reproduce
Explanation:
on edge
Beneficial mutations improve the survival and reproductive chances of an organism. Examples include mosquitos' resistance to insecticides, the color change in peppered moths during the Industrial Revolution, and the Antennapedia mutation in Drosophila.
Explanation:A beneficial mutation can be understood as the type of mutation that improves an organism's chances of survival and reproduction. For instance, consider the case of mosquitoes. The mutation that has provided them with resistance to some insecticides is an example of a beneficial mutation. This resistance has allowed them to survive even when faced with these chemicals, thus enhancing their chances of propagation.
Similarly, during the Industrial Revolution, peppered moths underwent a beneficial mutation where their coloration turned from light to dark. As industrial pollution darkened the environment, the dark coloration assisted in camouflage, aiding their survival.
The mutant allele can also interfere with the normal gene's function or its distribution in the body, which can result in beneficial mutations. For example, the Antennapedia mutation in Drosophila that allowed for the development of legs in place of antennae. However, whether a mutation is beneficial or not primarily depends on its effects on the organism's ability to mature sexually and reproduce successfully.
Learn more about Beneficial Mutation here:https://brainly.com/question/30587070
#SPJ5
Question 18 A chemist must prepare of sodium hydroxide solution with a pH of at . He will do this in three steps: Fill a volumetric flask about halfway with distilled water. Weigh out a small amount of solid sodium hydroxide and add it to the flask. Fill the flask to the mark with distilled water. Calculate the mass of sodium hydroxide that the chemist must weigh out in the second step. Round your answer to significant digits.
Answer:
9.0 g
Explanation:
There is some info missing. I think this is the original question.
A chemist must prepare 0.9 L of sodium hydroxide solution with a pH of 13.40 at 25°C. He will do this in three steps: Fill a volumetric flask about halfway with distilled water. Weigh out a small amount of solid sodium hydroxide and add it to the flask. Fill the flask to the mark with distilled water. Calculate the mass of sodium hydroxide that the chemist must weigh out in the second step. Round your answer to 2 significant digits.
Step 1: Calculate the pOH
We use the following expression.
pH + pOH = 14.00
pOH = 14.00 - pH = 14.00 - 13.40 = 0.60
Step 2: Calculate [OH⁻]
We use the following expression.
pOH = -log [OH⁻]
[OH⁻] = antilog -pOH = antilog -0.60 = 0.25 M
Step 3: Calculate [NaOH]
NaOH is a strong base that releases 1 OH⁻. Then, [NaOH] = 0.25 M
Step 4: Calculate the mass of NaOH
The molar mass of NaOH is 40.00 g/mol. The mass required to prepare 0.9 L of a 0.25 M solution is:
[tex]0.9 L \times \frac{0.25mol}{L} \times \frac{40.00g}{mol} = 9.0 g[/tex]
Consider the reaction.
2 upper N upper o upper c l double-headed arrow 2 upper N upper O (g) plus upper C l subscript 2 (g).
At equilibrium, the concentrations are as follows.
[NOCl] = 1.4 ´ 10–2 M
[NO] = 1.2 ´ 10–3 M
[Cl2] = 2.2 ´ 10–3 M
What is the value of Keq for the reaction expressed in scientific notation?
Answer: The value of Keq for the reaction expressed in scientific notation is [tex]1.6\times 10^{-5}[/tex]
Explanation:
Equilibrium constant is defined as the ratio of concentration of products to the concentration of reactants each raised to the power their stoichiometric ratios.
For the given chemical reaction:
[tex]2NOCl(g)\rightarrow 2NO(g)+Cl_2(g)[/tex]
The expression for [tex]K_{eq}[/tex] is written as:
[tex]K_{eq}=\frac{[NO]^2\times [Cl_2]}{[NOCl]^2}[/tex]
[tex]K_{eq}=\frac{(1.2\times 10^{-3})^2\times (2.2\times 10^{-3})}{(1.4\times 10^{-2})^2}[/tex]
[tex]K_{eq}=1.6\times 10^{-5}[/tex]
The value of Keq for the reaction expressed in scientific notation is [tex]1.6\times 10^{-5}[/tex]
Answer:
its A
Explanation:
Need help ASAP!!!!!!!
Give TWO examples of energy conversion that produces unwanted forms of energy.
For example, consider the energy used by an electric fan. The amount of electrical energy used is greater than the kinetic energy of the moving fan blades. Because energy is always conserved, some of the electrical energy flowing into the fan's motor is obviously changed into unusable or unwanted forms.
In a car engine, the chemical energy in the fuel converts into mechanical energy, but also produces unwanted heat and sound energy. In electric lighting, electrical energy becomes light energy, but also generates unnecessary heat energy.
Explanation:Examples of Energy ConversionThe first example is a car engine. When a car engine operates, the chemical energy in the fuel is converted into mechanical energy that moves the car. However, this process also produces unwanted forms of energy, such as heat and sound energy. The heat is generated due to the combustion of fuel, and the sound is created due to the movement of engine parts. This wasted energy reduces the overall efficiency of the energy conversion process.
The second example is electric lighting. The electrical energy that is input into the lightbulb gets converted into light energy, which is useful. But at the same time, unwanted heat energy is also produced. This heat energy is unhelpful and represents inefficiency in the energy conversion process.
Learn more about Energy Conversion here:https://brainly.com/question/33439849
#SPJ3