.
In an experiment, 1 mol of propane is burned to form carbon dioxide and water.



How many moles of oxygen are needed for the reaction?

Answer:

Correct answer for Plato users

Explanation:

Molarity is the number of moles of solute in one liter of the solution. Mathematically, M = n/V. Where Molarity of the solution is M, Number of moles of solute is n, and volume of the solution is V.

Calculate the mass in 1000 mL of the solution. Density of acetic acid is 1.00 g/mL.

Density = 1.00 g/mL. 1.0 mL has mass 1.00 g. 1000.0 mL has mass = (1000.0 mL/ 1.0 mL) * 1.00 g = 1000.0 g. hence, the mass in 1000.0 mL of the solution if 1000.0 g.

Calculate the mass contained of 5.00 % acetic acid as follows: 5.00 % of 1040 g = (5.00 / 100) * 1000.0 g = 50.0 g. Hence, the mass contained of 5.00 % acetic acid is 50.0 g.

Calculate the number of moles of acetic acid. Number of moles = Mass / Molar mass = 50.0 g / 60.0 g/mol = 0.8333 mol. Hence, the number of moles of acetic acid is 0.8333 mol.

Calculate the molarity of the solution, M = n / V = 0.8333 mol / 1.0 L = 0.8333 M

Therefore, the molarity of the solution if 0.8333 M

Atoms of different element can not have same atomic number because only same type of atoms combine to form element. The name of element with atomic number of 20 is calcium.

Element generally consist of atoms or we can atoms combine to form element. Atoms of an element is always same, means all the properties of all atoms of one type of element is same. Two or more than two atoms with different physical or chemical properties can not combine together to form an element.

The atomic number of fluorine is 9 and  atomic number of sodium is 11. If we add the atomic number of these two then we get 20 which is atomic number of calcium. Calcium belongs to group number 2 of periodic table.

Therefore the name of element with atomic number of 20 is calcium.

To know more about element, here:

https://brainly.com/question/8460633

#SPJ5

The mixture of sodium chloride and potassium chloride sampled was composed of 51.1% chloride (Cl-) ions by mass, after reacting it with silver nitrate (AgNO3). The remaining 48.9% of the mixture is constituted by sodium and potassium ions.

The premise of this question revolves around a precipitation reaction between sodium chloride and potassium chloride with silver nitrate (AgNO3). Firstly, we ascertain the number of moles of Cl- ions that precipitated by the AgNO3. We ascertain this by multiplying the volume of AgNO3 that reacted (0.0229 L) with its molarity (0.1000 M), yielding 0.00229 moles of Cl- ions. This value represents the total amount of NaCl and KCl in the original mixture.

Next, to find the mass of Cl in the sample, we multiply the moles of Cl- by its molar mass: 0.00229 mol * 35.45 g/mol = 0.0811 g. We know that the mass of the original sample was 0.1586 g, meaning the sample was 51.1% chloride by mass (0.0811 g / 0.1586 g).

Consequently, the mixture of sodium chloride and potassium chloride was composed of 51.1% chloride by mass and 48.9% of sodium and potassium ions.

https://brainly.com/question/29762381

#SPJ12

The rate of diffusion decreases with increasing molar mass of the gas, therefore the gas diffuses more quickly. As a result, the molar masses will be determined in order to decide which gas will diffuse the fastest. Here Xe has the highest molar mass, so it will be slowest.

According to Graham's law, the rate of effusion of a gas is inversely proportional to the square root of its molar mass, which roughly resembles the rate of diffusion. Light gases thus have a tendency to disperse and effuse at a much faster rate than heavy gases.

Xenon has a molar mass of 131.29 g/mol. Xe is the chemical symbol for xenon. The molar mass of a xenon is equal to its atomic mass because there is only one xenon atom in it.

Thus the correct option is C.

To know more about diffusion, visit;

https://brainly.com/question/94094

#SPJ6

To know if a reaction would occur, we refer to the reactivity series. Looking at the reactivity series, the zinc is at the upper list than nickel, therefore we could say that a reaction would occur. This would actually be a replacement reaction:

NiCl2  +  Zn  -->  ZnCl2  +  Ni

Answer is: yes, reaction occurs.

Reactivity series is an empirical progression of a series of metals, arranged by their reactivity from highest to lowest (alkaline metals have highest reactivity and Noble metals lowest reactivity).

Metal higher in the reactivity series will displace another, zinc is more reactive than nickel.

Chemical reaction: Zn(s) + NiCl₂(aq) → ZnCl₂(aq) + Ni(s).

Ionic reaction: Zn(s) + Ni²⁺(aq) + 2Cl⁻(aq) → Zn²⁺(aq) + 2Cl⁻(aq) + Ni(s).

Net ionic reaction: Zn(s) + Ni²⁺(aq) → Zn²⁺(aq) + Ni(s).

Zinc metal is oxidized (from oxidation number 0 to +2) and nickel is reduced (from oxidation number +2 to 0).

Answer:

The answer is chemical reaction- gas produced.

Explanation:

The complete question is:

"The baking soda looked like it dissolved in the vinegar. Sarah and Connor watched as the balloon expanded and filled with a gas. Was this a physical or chemical reaction and why?  

A) chemical - gas produced  

B) physical - water bottle got hot  

C) physical - baking soda dissolved  

D) chemical - baking soda disappeared"

A chemical reaction is a process by which one or more substances, called reactants, are transformed into one or more other substances with different properties, called products.

That is, in a chemical reaction, the bonds between the atoms that form the reactants are broken, reorganizing and forming new bonds, thus giving rise to one or more substances different from the initial ones.

Some indications of a chemical change are:

So, the answer is chemical reaction- gas produced.

Final answer:

Chloroethylene, or vinyl chloride, does not have isomeric forms due to its unique molecular structure that allows for only one arrangement of its atoms, unlike compounds that can exhibit cis-trans isomerism.

Explanation:

Chloroethylene, often referred to as vinyl chloride, does not exhibit isomerism because its molecular structure allows for only one unique arrangement of its atoms. Unlike compounds such as 1,2-dichloroethene, where the presence of a double bond creates the possibility for cis-trans isomerism due to restricted rotation, chloroethylene's structure does not allow for such variability. The presence of the double bond in chloroethylene binds it in a specific structural configuration, with no alternative spatial arrangements for its atoms, thereby precluding the existence of isomers. In summary, chloroethylene can only exist in one structural form and does not have isomeric forms.

The percentage abundance of each isotope, given that nitrogen atomic weight is 14.007, are:

How to calculate the percentage abundance of each isotope?

First, we shall obtain the percentage abundance of N-14. Details below:

[tex]Atomic\ weight = \frac{Mass\ \times\ abundance}{100} \\\\14.007 = \frac{14\ \times\ A}{100}\ +\ \frac{15\ \times\ (100 - A)}{100}\\\\14.007 = \frac{14A}{100}\ +\ \frac{1500\ -\ 15A}{100}\\\\14.007 = 0.14A\ + 15\ -\ 0.15A\\\\14.007 - 15 = 0.14A\ -\ 0.15A\\\\-0.993 = -0.01A\\\\A = \frac{-0.993}{y-0.01} \\\\A = 99.3\%[/tex]

Thus,

Percentage abundance of 2nd isotope, N-15 = 100 - A

= 100 - 99.3

= 0.7%

Final answer:

To find rich fertile soil, one should look towards regions with former glacial activity near rivers, such as the Midwest's glacial till or river valleys and deltas. Wetlands and lighter human exploitation contribute to fertility, while climates with heavy rainfall and high temperatures accelerate nutrient depletion, hence the need for careful soil management in such regions.

Explanation:

Rich, fertile soil is most often found in regions where natural conditions are favorable for agriculture. This includes areas that have been influenced by glacial activity, such as the Midwest of the United States, where glaciers have deposited glacial till from the Canadian Shield, contributing to some of the most fertile soils in the world. Additionally, the presence of wetlands has also enhanced soil fertility by accumulating organic carbon.

Another significant factor contributing to soil fertility is the geographic location in relation to water bodies. For instance, glacial activity areas near big rivers or regions prone to flooding result in increased fertility due to the rich sediments brought in by the water. Cultural and historical examples include the Egyptians along the Nile River and the societies in Southern Asia along the Mekong River. These fertile lands have often led to the development of early human settlements and subsequent agricultural growth.

Soil fertility can, however, be diminished due to certain conditions. High precipitation rates and temperatures, especially as one moves closer to the equator, can lead to intensive leaching of soil nutrients, and without careful management, the soil can quickly become less fertile. Therefore, regions with moderated climates, such as those found in river valleys and deltas, typically possess the highest soil fertility and are most conducive for agricultural practices without the immediate need for irrigation or heavy fertilization.

Nitrogen could form 3 covalent bonds if each of its unpaired electrons participates in one bond.

Nitrogen atom forms 3 bonds based on octet rule, because it has 5 valence electrons. That means it needs 3 bonds or three more electrons.

Keywords: Chemical bond, covalent bond, atom  

Level: High school  

Subject: Chemistry  

Topic: structure and bonding  

Sub-topic: Covalent bond

[tex]\boxed{{\text{3}}\;{\text{covalent bonds}}}[/tex] are formed by nitrogen if each of its unpaired electrons participates in one bond.

Further Explanation:

The bond that is formed by the mutual sharing of electrons between the bonded atoms is called a covalent bond. It is also known as a molecular bond. Covalent compounds are those compounds which are formed by the electron sharing between two or more non-metals.

The octet rule is the rule in accordance to which the elements have the tendency to bond with other elements and acquire eight electrons in their valence shells. This results in achieving a stable noble gas configuration.

For example, the formation of NaCl occurs according to the octet rule. The electronic configuration of sodium is   [tex]{\text{1}}{{\text{s}}^{\text{2}}}{\text{2}}{{\text{s}}^{\text{2}}}{\text{2}}{{\text{p}}^{\text{6}}}{\text{3}}{{\text{s}}^{\text{1}}}[/tex]while that of chlorine is [tex]{\text{1}}{{\text{s}}^{\text{2}}}{\text{2}}{{\text{s}}^{\text{2}}}{\text{2}}{{\text{p}}^{\text{6}}}{\text{3}}{{\text{s}}^{\text{2}}}{\text{3}}{{\text{p}}^{\text{5}}}[/tex].

Chlorine is one electron short of the stable noble gas configuration and sodium can achieve stable configuration by losing an electron. So sodium loses an electron and forms cation and chlorine gains that electron to complete its octet.

The atomic number of nitrogen is 7. Its ground state electronic configuration is [tex]{\mathbf{1}}{{\mathbf{s}}^{\mathbf{2}}}{\mathbf{2}}{{\mathbf{s}}^{\mathbf{2}}}{\mathbf{2}}{{\mathbf{p}}^{\mathbf{3}}}[/tex] . The partial orbital diagram is the diagrammatic representation of the distribution of electrons in the valence shell only. In case of nitrogen, the valence shell is 2.

Nitrogen has five electrons in its valence shell. Out of these five electrons, two are paired while three remain unpaired. If all three unpaired electrons are to be used, it will accept three electrons from the neighboring atoms to make three covalent bonds.

Learn more:  

1. Difference between heat and temperature: https://brainly.com/question/914750  

2. Solubility in grams per liter: https://brainly.com/question/5325606

Answer details:  

Grade: High School

Subject: Chemistry

Chapter: Ionic and covalent compounds

Keywords: covalent bonds, nitrogen, unpaired electrons, bond, partial orbital diagram, configuration, valence shell, mutual sharing, octet rule.

Final answer:

The chemical equation for the decomposition of ammonium nitrate to nitrous oxide and water is NH₄NO₃ (s) → N₂O (g) + 2H₂O (g). By applying the ideal gas law to the experimental conditions provided, we calculated the value of the gas constant (R) to be approximately 0.0821 L·atm/(mol·K).

Explanation:

To address the student's question regarding the reaction involving ammonium nitrate (NH₄NO₃) and the production of nitrous oxide (N2O), we first need to write a balanced chemical equation for the thermal decomposition:

NH₄NO₃ (s) → N₂O (g) + 2H₂O (g)

Next, to find the gas constant, we apply the ideal gas law equation PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

First, convert pressure from mmHg to atm (1 atm = 760 mmHg) and temperature from Celsius to Kelvin (K = °C + 273.15).

To find the number of moles (n), use the molecular weight of N₂O (44.01 g/mol) and the mass of the gas:

Now, substitute the values into the ideal gas law equation and solve for R:

Final answer:

In a monosaccharide, the number of hydrogen atoms is usually double the number of carbon atoms. Therefore, if a monosaccharide has 11 oxygen atoms, it likely contains 6 carbon atoms and 12 hydrogen atoms.

Explanation:

In a monosaccharide, the number of hydrogen atoms is usually double the number of carbon atoms. This is because each carbon atom forms bonds with either a hydrogen atom or an oxygen atom. Since the monosaccharide in this question has 11 oxygen atoms, we can assume it has 6 carbon atoms (since glucose, a hexose sugar, has 6 carbon atoms) and thus 12 hydrogen atoms.

Answer:

Chromium (Cr)

Explanation:

To know this, we first need to know, in which group and period of the periodic table is this element. Then, we can identify the element by calculating the atomic number.

In this case, let's write again the electron configuration:

1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d⁴

Now, with the electron configuration we can know the group in which this element is, the period, and the atomic number which will give us the identity of the element.

The period can be identified, by watching the electron configuration and look into the numbers that accompanies the orbitals (The orbitals are the letters s, p and d), and see which one has the highest number. In this case, we have the 4s² , the number 4 is the highest, so the period of this element is period 4.

Now that we know the period, let's determine the group. The group can be determined, watching the electrons of the last cap of the electron configuration (electrons are the numbers superscripted). Now, if the element pass the 3rd period we have to sum the electrons of the previous d cap. In this case, it was. So, we sum 4 electrons of the d orbytal from the previous cap, and the 2 electrons from the 4s, therefore the group of the element is the group 6 (Or column 6 of the table).

Now we know that it's on group 6 and period 4, the final confirmation will be the atomic number of the element. For this, we have to count all the electrons of all capes in the configuration.

Doing this, we have that the sum of all electrons is:

2+2+6+2+6+2+4 = 24

The atomic number of the element is 24.

So to conclude, the element which electron configuration is 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d⁴, group 6 and period 4, is Chromium (Cr)

Answer:

if so,then it forms metal halides like NaF,NaCl,KCl,NaBr etc...

In an ecosystem with young rivers the common characteristic is steep stream as the young rivers do not have other mentioned characteristics.

Ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.

Energy enters the system through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .Living organisms also influence the quantity of biomass present.By decomposition of dead plants and animals by microbes nutrients are released back in to the soil.

Learn more about ecosystem,here:

https://brainly.com/question/13979184

#SPJ5

In acid-base neutralization reactions, water (H₂O) and a salt are usually produced. For example, the reaction between HCl and Mg(OH)₂ forms magnesium chloride (MgCl₂), and the reaction between H₂SO₄ and KOH forms potassium sulfate (K₂SO₄).

In most acid-base neutralization reactions, the chemical substance produced is water (H2O) and a salt. The general formula for an acid-base neutralization reaction is:

Acid (aq) + Base (aq) → Salt (aq) + Water (l)

An example of a balanced chemical equation for the neutralization reaction between hydrochloric acid (HCl) and magnesium hydroxide (Mg(OH)2) would be:

HCl(aq) + Mg(OH)2(aq) → MgCl2(aq) + 2H2O(l)

The salt formed in this reaction is magnesium chloride (MgCl2).

For the neutralization of sulfuric acid (H2SO4) with potassium hydroxide (KOH), the balanced chemical equation is:

H2SO4(aq) + 2KOH(aq) → K2SO4(aq) + 2H2O(l)

Here, the salt formed is potassium sulfate (K2SO4).