Answer:
public transportation
mark me as brainliest
Answer:
A) public transportation
Explanation:
public transportation can help reduce the amount of cars that contribute to an accumulation of greenhouse gases
Wrong answers:
not recycling contributes to greenhouse gases by requiring new products to be made and contributing to land fills
cutting down more trees both requires tools that create greenhouse gases and lowers the number of trees that could help absorb greenhouse gases
Therefore, the correct answer is A) public transportation
what takes place during a redox reaction
In a redox reaction, one substance is oxidized (loses electrons) while another substance is reduced (gains electrons). An example is the reaction between hydrogen and fluorine.
Explanation:During a redox reaction, one substance gets oxidized, meaning it loses electrons, while another substance gets reduced, meaning it gains the electrons that were lost by the oxidized substance. This simultaneous oxidation and reduction is why these reactions are referred to as 'redox' reactions. For example, in the reaction between hydrogen and fluorine, H2 + F2 → 2HF, hydrogen is oxidized, as it loses an electron, and fluorine is reduced, as it gains the electron lost by hydrogen.
Learn more about redox reaction here:https://brainly.com/question/31600276
#SPJ6
which of the following for an object should be known to calculate its density
Density = mass / volume
therefore, both mass and volume are needed
the first one represents volume
The Space it occupies is the answer
Rutherford's research was primarily involved with: electron distribution defining the components of nuclei using electromagnetic energy
Answer is: defining the components of nuclei.
Rutherford theorized that atoms have their charge concentrated in a very small nucleus.
This was famous Rutherford's Gold Foil Experiment: he bombarded thin foil of gold with positive alpha particles (helium atom particles, consist of two protons and two neutrons).
Rutherford observed the deflection of alpha particles on the photographic film and notice that most of alpha particles passed straight through foil.
That is different from Plum Pudding model, because it shows that most of the atom is empty space.
Rutherford conducted research that led to the first splitting of the atom in a nuclear reaction.
Ernest Rutherford's research primarily focused on defining the components of nuclei, leading to the discovery of the atomic nucleus and a planetary model of the atom, which advanced the understanding of the atom's structure.
Ernest Rutherford, a pioneering physicist, is renowned for his groundbreaking work that led to the modern understanding of atomic structure. His research involved defining the components of nuclei through experiments with alpha particles. Rutherford's shocking discovery was that atoms consist of a tiny, dense, positively charged nucleus, revolutionizing the atomic model at the time.
Unlike the previous plum pudding model, which assumed a uniform distribution of electrons within a positively charged atom, Rutherford proposed that electrons orbit this central nucleus, analogous to planets orbiting the sun. This model represented a significant shift from the thought that electrons were uniformly distributed throughout the atom's volume. Rutherford's planetary model laid the foundation for the quantum mechanical principles that describe electron distribution in contemporary atomic theory.
Rutherford's experiments involved directing a beam of alpha particles, emitted from the radioactive decay of radium, at thin gold foil. Along with his colleagues Hans Geiger and Ernest Marsden, Rutherford observed the scattering of these particles, leading to the conclusion that a massive positive charge (the nucleus) occupied a minute portion of the atom's space.
please help tia!
Referring to the previous question, who had used more power ; the man who walked up the hill or the man who bicycled up the hill?
They both used the same amount of power
The one who walked
Neither of them used power
The one who bicycled
CO2+ H2O --> C6 H12 O6 +O2
hello there the answer is 6 H2O + 6 CO2 = C6H12O6 + 6 O2
Answer:
Photosynthesis
Explanation:
explain how heat transfer is occurring through convection, radiation AND conduction in this picture.
Heat is type of energy can be transferred in three different ways:
1) direction contact through collisions (also called conduction).
Thermal conductuction is the transfer of heat through physical contact.
Thermal conduction is the transfer of heat by microscopic collisions of particles.
Heat spontaneously flows from a hotter (in this example hot liquid) to a colder body (in this example spoon).
2) through a fluid making a current created by less dense fluids floating and more dense fluids sinking (also called convection).
Stirring hot liquid with spoon.
3) by waves traveling with or without a medium (also called radiation).
Waves radiate from hot liquid.
Heat is transferred through conduction, convection, and radiation, often occurring simultaneously. Conduction involves direct contact, convection is the movement of warm fluids, and radiation transfers energy via electromagnetic waves. These processes can be observed in a system like a fireplace, where all three mechanisms contribute to heat transfer.
Explanation:Heat Transfer: Conduction, Convection, and RadiationIn the context of heat transfer, conduction, convection, and radiation are three core mechanisms that allow energy to be transferred as heat. Whenever a temperature difference exists, these mechanisms facilitate the movement of heat.
Conduction: This type of heat transfer occurs through stationary matter by physical contact. For example, heat transferring from the burner of a stove through the bottom of a pan to the food is achieved by conduction.Convection: Convection involves the macroscopic movement of a fluid (either gas or liquid). Heat is carried by the fluid as it moves, such as in the case of hot water rising within a pot on a stove, allowing colder water to sink and get heated at the bottom, thus setting up a circulation pattern.Radiation: Radiation is the transfer of energy through electromagnetic waves without the need for a medium. An example is the heat we feel from the Sun, where the energy is transferred through the vacuum of space.In scenarios like a fireplace, these three methods of heat transfer are evident:
Heat radiates into the room, warming it up.The structure of the fireplace and the adjacent wall conduct heat into the room, albeit at a slower pace.Convection occurs as warm air rises and escapes up the chimney, drawing in colder air from the surrounding space, which then gets heated by the fire.a certain skin lotion is a fine mixture of water and various oils. this lotion is cloudy and cannot be separated into oil and water by filtration. moreover, it’s compon do not separate when left standing. what type of mixture is it
Final answer:
The lotion is a colloid, which is a stable mixture of water and oils that remains consistent without separation and exhibits the Tyndall effect.
Explanation:
The skin lotion described is a type of mixture known as a colloid. In this colloid, the water and oils do not separate upon standing, nor can they be easily filtered apart. The mixture is cloudy because the particles are large enough to scatter light, which is also known as the Tyndall effect. Typical lotions are oil-in-water emulsions that use substances to keep the mixture consistent without separation. Despite the presence of water and oils, which are generally immiscible, the formulation of lotions ensures that they remain stable and homogenous through the use of emulsifiers.
Ascorbic acid, or vitamin C (C6H8O6, molar mass = 176 g/mol), is a naturally occurring organic compound with antioxidant properties. A healthy adult’s daily requirement of vitamin C is 70-90 mg. A sweet lime contains 2.88×10−4 mol of ascorbic acid. To determine whether the ascorbic acid in a sweet lime meets the daily requirement, calculate the mass of ascorbic acid in 2.88×10−4 mol of ascorbic acid.
Answer:
5.07×10^-2
Explanation:
in case they want it to be written out instead of the plain answer
In which of these ways can volcanoes help build up land?
I need help with #26
Radioactive substances decay and emit alpha, beta, positron, and gamma particles in the process of converting to stable nuclei. An alpha particle has two protons and two neutrons, is relatively heavy and deflected by electrical and magnetic fields. Beta particles are fast moving electrons which are greatly deflected by electrical and magnetic fields. Gamma particles (highly energetic) are neutral and not deflected electrical and magnetic fields. Positron is positively charged beta particle. Opposite charges attract each other. So we can say that alpha particle and positron being positively charged are attracted towards the negative plate. Alpha particle is heavy, so it is slightly deflected towards the negative plate. Beta particle being negatively charged is deflected towards the positive plate and gamma particle is neutral and not deflected in the electrical field.
Therefore, the correct answer is,
A. Beta particle
B. Gamma particle
C. Alpha particle
D. Positron
The correct answer indicating the particle deflected towards the positive plate is option A, the Beta particle. Options B (Gamma particle), C (Alpha particle), and D (Positron) are not deflected towards the positive plate in an electric field.
In the context of radioactive decay, the behavior of particles in electric and magnetic fields provides clues to their charge and mass.
Beta particles, being fast-moving electrons, are negatively charged and deflect towards the positive plate.
Gamma particles, being neutral, remain unaffected by electric and magnetic fields.
Alpha particles, although positively charged, are heavy and only slightly deflected towards the negative plate.
Positrons, being positively charged, would be attracted towards the negative plate.
Therefore, the correct answer indicating the particle deflected towards the positive plate is option A, the Beta particle. Options B (Gamma particle), C (Alpha particle), and D (Positron) are not deflected towards the positive plate in an electric field.
Learn more about radioactive decay here:
https://brainly.com/question/23959901
#SPJ6
the normal boiling point of liquid x is less than of y which is less than that of z which of the following is in the correct order of increasing vapor pressure of the three liquids at stp?
XYZ is the answer
mark brainliest if helpful
The correct order of increasing vapor pressure at STP for the liquids X, Y, and Z is Z, Y, X, because vapor pressure is inversely related to boiling point. Option B is correct.
The student has asked to arrange liquids X, Y, and Z in the correct order of increasing vapor pressure at Standard Temperature and Pressure (STP). Liquids boil when their vapor pressure becomes equal to the external pressure. As per the given information, the normal boiling point of X is less than that of Y, which is less than that of Z. It is known that the vapor pressure of a liquid is inversely related to its boiling point.
Therefore, the liquid with the lower boiling point will have a higher vapor pressure at a given temperature. Hence, since X has the lowest boiling point, followed by Y, then Z, the correct order of increasing vapor pressure at STP would be Z, Y, X.
Hence, B. is the correct option.
The complete question is:
The normal boiling point of liquid X is less than that of Y, which is less than that of Z. Which of the following is the correct order of increasing vapor pressure of the three liquids at STP?
A) X, Y, Z
B) Z, Y, X
C) Y, X, Z
D) X, Z, Y
E) Y, Z, X
Maple trees and tulips are classified as autotrophs because they both which
a) produce gametes by the process of mitosis
b) produce carbon dioxide and water as metabolic wastes
c) are able to obtain complex organic materials
d) are able to synthesize organic molecules from inorganic raw materials
d) are able to synthesize organic molecules from inorganic raw materials
Hope it helps
Maple trees and tulips are classified as autotrophs because D. are able to synthesize organic molecules from inorganic raw materials.
An autotroph refers to the organism that is able to produce its own food through the use of water, light, and carbon dioxide.
Due to the fact that autotrophs produce their food, they're called producers too. Autotrophs produce their food through the process of photosynthesis. Since maple trees and tulips are also able to synthesize organic molecules from inorganic raw materials, they are autotrophs.
Read related link on:
https://brainly.com/question/10253663
chemicals integrate to kill insects and other pests that damage crops are
I believe the answer is pesticides
Hello,
Farmer's use many chemicals on their crops. The specific chemical you are looking for is Insecticides. Insecticides are specifically for crops, and it is used to kill insects and bugs. There are three different kinds of pesticides, and the one that mainly kills bugs in insecticides
- I . A -
a television remote control operates at 319 THz, what is the wavelength of the infrared light in nanometers?
Given:
Frequency (ν) = 319 THz
To determine:
The wavelength corresponding to the given frequency
Explanation:
Wavelength (λ) and Frequency(ν) are related as:
λ = c/ν
where c = speed of light = 3*10⁸ m/s
Now:
SI unit of frequency is Hertz (Hz) also expressed as cycles per second
i.e 1 Hz = 1 s⁻¹
1 Terahertz (THz) = 10¹² Hz
therefore the given frequency ν = 319 *10¹² s⁻¹
λ = 3 * 10⁸ ms⁻¹/319 *10¹² s⁻¹ = 940 * 10⁻⁹ m
since 1 nanometer (nm) = 10⁻⁹ m
The wavelength is λ = 940 nm
Ans: The infrared wavelength = 940 nm
How many atoms of oxygen are in three units of aluminum sulfate
Al2(SO4)3 is the formula for one aluminum sulfate atom.
There is 4 oxygen atoms in one so in 3 they would have 12
12 Oxygen Atoms
Please mark brainliest which would help alot :3
What kind of bond is present in HCl
Answer:
ionic
Explanation:
What do you, a complex, multicellular organism, have in common with this single-celled algae that lives in the ocean? A) We have nothing in common. B) We have similar cell structure. C) We have the exact same cell parts. D) We both need salt water to survive.
Answer:
The answer is "B". We have similar cell structure.
Explanation:
We have similar cell structure. The algae is made of one cell. We are made of many, many cells. The cells that make up complex living things are different from each other.
The thing that a complex, multicellular organism, has in common with single-celled algae that live in the ocean is B. We have a similar cell structure.
Cells are referred to as the building blocks of life. Cells are important for every organism. It should be noted that while a unicellular organism and one cell, the multicellular organisms have two or more cells. It should be noted that the unicellular organisms and the multicellular organisms have the same cell structure. In this case, the unicellular organisms and the multicellular organisms both have cytoplasm and plasma membranes. They also contain DNA and ribosomes which are important for gene expression.In conclusion, the correct option is B
Read related link on:
https://brainly.com/question/17745638
what is a difference between a decomposition ans synthesis/combination reaction
A composition reaction produces a single substance from multiple reactants. A decomposition reaction produces multiple products from a single reactant.
Hope This Helped
How are electromagnetic waves affected as the frequency of the waves increases?
A) energy and wavelength increase
B) energy and wavelength decrease
C) energy decreases, wavelength increases
D) energy increases, wavelength decreases
As the frequency is how many waves pass a fixed point in certain amount of times. This means that the waves get closer together and, therefore, the wavelength decreases. It also means that the wave has more energy.
Answer: D) Energy increases, wavelength decreases
When the frequency of the waves increases, its energy increases, while the wavelength decreases.
• A travelling disturbance, which mediates energy from one place to another is known as a wave.
• The tendency to do work or cause a change is known as the energy.
• Waves can be determined with the help of frequency and wavelength.
• In a given unit of time, the number of complete wavelengths is known as frequency.
• With the increase of the size of wavelengths, its energy and frequency decreases.
• There are two basic kind of waves, that is, electromagnetic and mechanical waves.
• The waves, which can travel through a medium or a vacuum is known as the electromagnetic waves.
• The waves with long wavelengths comprise less energy than waves with short wavelengths.
Thus, correct answer is option d, that is, energy increases, wavelength decreases.
To know more about:
https://brainly.com/question/21043141
What is the density of the table tennis ball ? Record your answer to the nearest hundredth
The density of a table tennis ball cannot be determined without knowing its mass and volume.
Explanation:The density of a table tennis ball is the mass of the ball divided by its volume.
Since we do not have the mass or volume of the table tennis ball, we cannot calculate its density.
The density of an object is typically measured in grams per cubic centimeter (g/cm³) or kilograms per cubic meter (kg/m³).
Learn more about Density of table tennis ball here:https://brainly.com/question/29139183
#SPJ12
Table tennis ball's density can't be provided directly without specific mass or volume data. However, it's generally understood to be less than water's density since it floats in water. You can measure the ball’s mass and volume yourself to calculate the density.
Explanation:The density of an object can be calculated by dividing its mass by its volume. We don't have specific mass or volume values for a table tennis ball provided, so we cannot directly provide a density value. However, you can usually find this information on the ball packaging or from the manufacturer. Alternatively, you could calculate it yourself by measuring the mass of the ball using a scale, and the volume by displacement method in a liquid.
Remember, the unit of density is often expressed as grams per cubic centimeter (g/cm³) or kilograms per cubic meter (kg/m³) depending upon the unit system being used. If we were to compare a table tennis ball generally to water, which has a density of 1 g/cm³, we could say that the table tennis ball has a much lower density because it floats on water.
Learn more about Table Tennis Ball Density here:https://brainly.com/question/29139183
#SPJ12
The four main economic systems include...
I would say traditional, command, market and mixed.
Hope this helped
Mind marking me brainliest. Thank you!
A sample of air with a volume of 2.20m3 at a pressure of 105 KPa and a temperature of 30c is cooled to 10c and the pressure is reduced to 75.0 KPa.
What is the new volume?
6.9
1.34
2.56
43.0
2.88
Answer: The answer is 2.88 m3
Explanation: Since temperature, pressure and volume are given in the question, the general gas equation will be useful in calculating the new volume.
General gas equation,
(P1V1)/T1 = (P2V2) /T2 ................ (1)
Where,
P1 = Initial pressure
P2 = Final pressure
V1 = Initial volume
V2 = Final volume
T1 = Initial temperature in kelvin
T2 = Final temperature in Kelvin
Hence, from the question :
P1 = 105 KPa = 105,000 Pa
P2 = 75 KPa = 75,000 Pa
V1 = 2.20 m3
V2 =?
T1 = 30 °C = (273+30) K = 303 K
T2 =10 °C = (273+10) K = 283 K
Therefore, substitute these value into the general gas equation as given in eq (1) above.
V2 = (P1V1T2) /P2V1
V2 = (105000×2.2×283)/ (75000×303)
V2 = 2.88 m3
help me with this please!!
heterogeneous mixtures are those that are mixed, but not evenly. so you can see the different parts. compound is something made up of 2 or more elements. so, K will be a compound, as they are giving you the chemical formula, and showing there are 2 elements. and L is the heterogeneous mixture, as, even though it is crushed, the rocks can be picked apart.
What is the relationship between diatomic molecules and diatomic elements? Name One example of a diatomic element.
Answer:
Diatomic molecules are molecules made of two atoms. The atoms can be of the same element (diatomic elements) like in H2, N2, and O2, or of different elements (diatomic compounds) like in HCl, NaCl, and KBr.
In contrast, monatomic elements consist of single atoms, like Ar, He and Ne.
If a refrigerator is a heat pump that follows the first law of thermodynamics, how much heat was removed from food inside of the refrigerator if it released 258J of energy to the room?
In the first law of thermodynamics, it states when heat is converted into energy, where as the total energy in the room could transform into another but can never be created or destroyed. If you release 258J of energy in the room, 258J would also be removed from the food according to the isolating system.
Your answer would be 258J.
Visible light, X Rays infrared radiation and radio waves all have the same
The common feature of visible light, X-rays, infrared radiation, and radio waves is that they all represent types of electromagnetic radiation, possessing different wavelengths and energy levels, but all moving at the speed of light.
Explanation:Visible light, X-rays, infrared radiation, and radio waves all fall under the umbrella of electromagnetic radiation, which consists of waves of energy that move through space at the speed of light. This spectrum includes, from longest wavelength to shortest: radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays. The important common feature between all these types of rays is that they travel at the same speed in a vacuum, which is the speed of light, at approximately 299,792 kilometers per second.
Each type of electromagnetic radiation is characterized by its wavelength and frequency, which determine its position in the electromagnetic spectrum. For example, X-rays have shorter wavelengths and thereby more energy, enabling them to penetrate human tissue. Visible light has wavelengths ranges from 380 to 740 nm, frequencies visible to the human eye. Infrared radiation and radio waves have longer wavelengths and lesser energy.
Learn more about Electromagnetic Radiation here:https://brainly.com/question/10759891
#SPJ11
The equation that describes the process of photosynthesis
the last choice is the equation for photosynthesis
whoch of the following statments doesnt describe the structure of a atowhich of the following do not describe the structure of an atom inside the nucleus of an atom are protons and neutrons protons are positively charged subatomic co-product electrons are negatively charged subatomic particles most of the mass of the atom comes from the electron cloud
Answer : The incorrect option is, The most of the mass of the atom comes from the electron cloud.
Explanation :
There are three basic particles of an atom which are neutrons, protons and electrons.
The nucleus which is present in the center of an atom that contains the neutrons and the protons. The protons are positively charged and neutrons has no charge.
The outer region of an atom contains the electrons and the electrons are negatively charged.
As per given options, the statement which is the most of the mass of the atom comes from the electron cloud is incorrect statement because the most of the mass comes from the nucleus in which protons and neutrons are present.
What is the correct chronological order of scientists contributing to the modern periodic table? Lavoisier, Newlands, Moseley, Dobereiner, and Mendeleev Lavoisier, Dobereiner, Newlands, Mendeleev, and Moseley Moseley, Mendeleev, Newlands, Dobereiner, and Lavoisier
Answer: The correct order is :
Lavoisier, Dobereiner, Newlands, Mendeleev, and Moseley
Explanation:
In 1789, the Lavoisier given the periodic table distribution by placing the elements into two groups of metals and non metals.
In 1817, the Dobereiner attempted to classify elements in a periodic table by placing them group of three with similar chemical and physical properties. these groups were named as triads .
In 1864 , the Newlands classified total 62 elements into eight groups according to their respective physical properties. And were also known as Law of Octaves.
In 1869, the Mendeleev classified the periodic table on the basis of atomic mass. In which elements were arranged in increasing order of their atomic masses.
In 1913, Moseley classified the periodic table on the basis of increasing number of protons in the elements.
Answer:
Number 2
Explanation:
From edge
Which statement is true about a proton and a neutron?
1) they have the same masses and different charges
2)they have the same masses and different charges
3) they have different masses and the same charge
4) they have different masses and different charges
Final answer:
The true statement is that protons and neutrons have approximately the same masses and different charges. Hence option 1- 'They have the same masses and different charges' is the correct answer.
Explanation:
The statement that is true about a proton and a neutron is that they have approximately the same masses and different charges. Both the proton and neutron have masses close to 1 atomic mass unit (amu), but they have different charges: the proton has a positive charge (+1), while the neutron is electrically neutral (0 charge).
Protons and neutrons, which reside in the nucleus of an atom, are considered the primary contributors to the atom's mass, as their mass is approximately 1836 times greater than that of an electron. Despite their similar masses, protons and neutrons differ significantly in their electric charge, which is crucial for understanding atomic structure and nuclear chemistry.