Answer:
tossing it horizontally at a faster speed
Explanation:
The property that objects have to fall when released from a certain height from the ground was well known since ancient times. For much of our history, the free-falling motion of objects was considered natural, ignoring the need for any causative agent. It was not until the seventeenth century that the English scientist Isaac Newton formulated a theory capable of explaining the cause of these movements and describing them precisely: the law of universal gravitation.
Under this law, free fall is a uniformly accelerated motion and causes any object influenced by the acceleration of gravity to move. This explains why the ball, dropped by Cecelia, fell in a straight path to the ground. According to this law, if Cecelia wanted the ball to travel the widest possible path during the fall, she should play the ball horizontally at a faster speed.
A car travels in a straight line for 3.7 h at a constant speed of 71 km/h . what is its acceleration? answer in units of m/s 2 .
Answer:
a=0 m/s2
Explanation:
t=3,7 h=13320 s
v=const=71 km/h=19,7222 m/s ( 71*1000 m/2600 s=19,7222222 m/s)
if the speed is constant
a=Δv/Δt
since Δv= 0m/s since the speed is constant...
if the speed would rise from 0 m/s to 19.72222m/s
then a=(19.7222 m/s)/13320 s
a=0.00148 m/s2
A car travels in a straight line for 3.7 h at a constant speed of 71 km/h . what is its acceleration? answer in units of m/s 2
The image shows one complete cycle of a mass on a spring in simple harmonic motion.
Which describes the system at point D?
A.The velocity has the maximum upward value because the acceleration upward is at a maximum.
B.The net force is at a maximum in the downward direction, so the velocity begins to decrease.
C.The velocity is zero because the net force is zero.
D. The net force is zero, so the acceleration is zero.
Answer:
D. The net force is zero, so the acceleration is zero
Explanation:
In a simple harmonic motion, velocity and acceleration are out-of-phase as follows:
- When the displacement is zero (so, when the spring is in equilibrium position), the acceleration is zero, because the force is zero. In fact, the force is given by Hook's law:
[tex]F=-kx[/tex]
So, when x=0, F=0, and the acceleration is also zero according to Newton's second law:
[tex]a=\frac{F}{m}=0[/tex]
Instead, the velocity is maximum. In fact, the total mechanical energy (sum of kinetic and elastic potential energy) is constant, and since the elastic potential energy:
[tex]U=\frac{1}{2}kx^2[/tex]
is zero at x=0, this means that the kinetic energy is maximum. But the kinetic energy is
[tex]K=\frac{1}{2}mv^2[/tex]
and so, the velocity is also maximum.
- When the displacement is maximum, it is the opposite: the acceleration is maximum (because x is maximum, so the force is maximum), while the velocity is zero, because the elastic potential energy is maximum and so the kinetic energy is zero).
At point D, we are in the first situation (the spring is passing its position of equilibrium, so x=0), therefore the net force is zero and the acceleration is zero.
Answer:
D: The net force is zero, so the acceleration is zero
Explanation:
Amil takes a car trip through the mountains. He drives 25 miles in 30 minutes to get to an outlook. What is the average speed, in meters per second rounded to the nearest hundredth, of Amil's trip to the outlook, if 1 mile is equal to 1609 meters?
To find the average speed of Amil's trip to the outlook, we convert the distance and time units and use the formula Average Speed = Distance / Time. The average speed of Amil's trip is 22.35 meters per second (rounded to the nearest hundredth).
Explanation:To find the average speed of Amil's trip, we can use the formula:
Average Speed = Distance / Time
Amil drove 25 miles in 30 minutes to get to the outlook. To convert the distance from miles to meters, we use the conversion factor: 1 mile = 1609 meters. So, 25 miles is equal to 25 x 1609 = 40225 meters. To convert the time from minutes to seconds, we multiply 30 minutes by 60 to get 1800 seconds. Now we can calculate the average speed:
Average Speed = 40225 meters / 1800 seconds
Average Speed = 22.35 meters per second (rounded to the nearest hundredth).
Which object provides an inertial frame of reference? which object provides an inertial frame of reference? the tip of the moving second hand of a clock a rock thrown vertically upward a pendulum swinging with no air resistance a skydiver falling at terminal velocity?
The object that provides an inertial frame of reference is the skydiver falling at terminal velocity, as it is a scenario where the object moves at constant velocity with no net external force acting upon it.
Explanation:An inertial frame of reference is defined as a reference frame in which an object either remains at rest or moves at a constant velocity, provided no external forces are acting upon it. Among the options given, the skydiver falling at terminal velocity provides an inertial frame of reference. Terminal velocity is a constant speed reached by an object when the drag force from the air resistance is equal to the force of gravity, causing no net force on the skydiver and thus no acceleration. The other objects are either accelerating or experiencing changing velocities which disqualify them as inertial reference frames.
What unit is electronegativity measured in?
Electronegativity is measured on a relative, dimensionless scale known as the Pauling scale. The scale is based on the ability to attract electrons when forming covalent bonds, with fluorine set at 3.98 and other elements scaled against this value. The Pauling scale is the standard despite the abstract nature of electronegativity.
Electronegativity is measured on a relative scale called the Pauling scale. This scale was developed by Linus Pauling in the 1930s. On the Pauling scale, which is the most commonly used scale for measuring electronegativity, electronegativity is dimensionless and has no unit of measure. Fluorine, the most electronegative element, is set at a value of 3.98. All other elements are assigned values from 0 to 4.0 based on their relative ability to attract a bonding pair of electrons compared to fluorine.
The notion of electronegativity is crucial in understanding the chemical behavior of elements, particularly in the formation of covalent bonds. The higher the electronegativity value of an element, the more strongly it tends to attract bonding electrons. Fluorine's high electronegativity makes it an important reference point against which the electronegativities of other elements are measured.
Since electronegativity is an abstract property and cannot be measured directly, the Pauling scale is based on observable quantities such as the strengths of covalent bonds and molecular dipole moments. Different scales may use various methodologies, but the Pauling scale remains the standard for discussed trends in electronegativity.
Calculate the energy in electron volts of X-rays that have a frequency of 3.00 × 1016 Hz.
A) 120 eV
B) 124 eV
C) 366 eV
To calculate the energy of X-rays with a frequency of 3.00 × 10^16 Hz, use Planck's equation to find it to be approximately 124 eV.
The energy of X-rays with a frequency of 3.00 × 10^16 Hz can be calculated using Planck's equation:
E = hf
Given h (Planck's constant) = 6.626 × 10^-34 J-s and f (frequency) = 3.00 × 10^16 Hz, you can calculate the energy:
E = (6.626 × 10^-34 J-s) × (3.00 × 10^16/s) = 1.99 × 10^-17 Joules. Convert this to electron volts by dividing by the charge of an electron:
1 eV = 1.602 × 10^-19 Joules, so:
1.99 × 10^-17 J ÷ (1.602 × 10^-19 J/eV) ≈ 124 eV
Therefore, the correct answer is B) 124 eV.
1) mechanical
2) electrical
3) thermal
4) light
5) chemical
In this system,_________ energy from the moving water of the faucet turns the turbine. The _________ energy of the spinning turbine generates __________ energy which is transformed into __________ energy that causes the temperature of the water to increase. The water then becomes steam and gives off more _________ energy into the atmosphere.
In this hydroelectric energy system, mechanical energy from the moving water turns the turbine, generating electrical energy. This electrical energy is then transformed into thermal energy, increasing the water's temperature. The water eventually becomes steam and releases more thermal energy into the atmosphere.
Explanation:In this system, mechanical energy from the moving water of the faucet turns the turbine. The mechanical energy of the spinning turbine generates electrical energy which is transformed into thermal energy that causes the temperature of the water to increase. The water then becomes steam and gives off more thermal energy into the atmosphere.
How do you solve this system of equations. x+y−z = 0 5.08x − 9.96y = 5.31 9.96y − 14.72z = −10.37?
A ball is thrown straight up into the air, with an initial speed of 18.2 m/. How far has it gone after 1.00 s?
Answer: 13.3 m
I got it right on Acellus
What word doesn't belong: planet, galaxy, sun, moon?
Galaxy is "all-encompassing" of the other words given so it doesn't belong.
What is galaxy?A galaxy is a collection of stars, stellar remnants, interstellar gas, dust, and dark matter that is gravitationally bound. The name comes from the Greek word galaxias, which translates to mean "milky" and refers to the Milky Way galaxy, which houses the Solar System.
Given in the question word doesn't belong: planet, galaxy, sun, moon
So, we can see "galaxy" is "all-encompassing" of the other words given, so it does not belong.
Galaxy is "all-encompassing" of the other words given so it doesn't belong.
To learn more about galaxy refer to the link:
brainly.com/question/24836631
#SPJ5
What is the standard unit used to measure mass?
cubic meters
gram
liter
meter
Answer:
The standard unit used to measure of mass is gram.
(2) is correct option.
Explanation:
S.I is the standard international system of unit.
The S.I unit of mass is kilogram.
1 kg = 1000 gm
So, We can say that,
The standard unit used to measure mass is gram.
Cubic meter is the unit of volume.
Liter is the unit of water.
Meter is the unit of length.
Hence, The standard unit used to measure of mass is gram.
Which of the following is not a simple machine?
A. inclined plane
B. a screw
C. a bike
D. a lever
If it requires 5.0 j of work to stretch a particular spring by 1.8 cm from its equilibrium length, how much more work will be required to stretch it an additional 3.7 cm ?
When a star leaves the main sequence and expands toward the red giant region, what is happening inside the star?
What part of an atom can change during a nuclear reaction but cannot change during a chemical reaction
Answer:
The answer would be The number of protons and neutrons
Neutrons and protons cannot be removed from nucleus from chemical reactions because they are strongly held together but nuclear reactions are strong enough to separate them
Explanation:
Nuclear reactions involve a change in the nucleus of an atom, usually producing a different element. Chemical reactions, on the other hand, involve only a rearrangement of electrons and do not involve changes in the nuclei
Force per unit area defines which of the following?
gravity
pressure
force
temperature
The Answer is Pressure hope it helps
Describe the differences among ultraviolet waves, visible light waves, and infrared waves. how are these waves alike?
What type of bonding is represented in Figure 2-2???
What might happen to the continents if the Atlantic Ocean continues to expand because of movement along this ridge?
beth walked to the school in 80 seconds from a position 100 m west of the school. what was her velocity?
what is the average of 84,56,92,73,and 45
If you are looking for a material that is a good conductor, you will look for a material that will (2 points)
readily accept neutron flow.
resist neutron flow.
readily accept electron flow.
resist electron flow.
A large rock has a mass of 50 kg and is rolling downhill at 3 m/s. What is its momentum?
The momentum of the large rock that has a mass of 50kg and is rolling downhill at 3 m/s is 150kgm/s.
HOW TO CALCULATE MOMENTUM:
The momentum of the rock can be calculated by multiplying the mass of the rock by its velocity:Momentum (p) = mass (kg) × velocity (m/s)According to this question, a large rock has a mass of 50 kg and is rolling downhill at 3 m/s. The momentum is calculated as follows:Momentum (p) = 50kg × 3m/sMomentum (p) = 150kgm/sTherefore, the momentum of the large rock that has a mass of 50kg and is rolling downhill at 3 m/s is 150kgm/s.Learn more about how to calculate momentum at: https://brainly.com/question/20644069?referrer=searchResults
The metric system is based on units of
A: twenty five
B fives
C: sixteen
D: tens
A capacitor is charged to a potential difference of 12v it delivers 40% of its stored energy to a lamp what is the final potential difference across the capacitor
The final potential difference across the capacitor after delivering 40% of its stored energy to a lamp is approximately 9.49V.
Explanation:The question asked is related to the energy stored in a capacitor and its link to the potential difference across it. The energy stored in a capacitor is given by the relation Uc = CV²/2, where C is the capacitance and V is the potential difference. When a capacitor delivers 40% of its stored energy to a lamp, this means a reduction in the stored energy and therefore a corresponding reduction in potential difference as well.
As the stored energy is directly proportional to the square of the potential difference, if the energy reduces to 60% (after delivering 40%), the final potential difference will be the square root of this fraction (sqrt(0.6)) times the initial potential difference. The final potential difference across the capacitor will therefore be sqrt(0.6) * 12V, which is approximately 9.49V.
Learn more about Potential difference here:https://brainly.com/question/23716417
#SPJ11
The purpose of biofeedback is to help subjects __________.
A) control their internal processes
B) understand how fear holds them back
C) determine whether they are sick
D)manipulate computers without a keyboard
The purpose of biofeedback is to help subjects "control their internal processes".
Biofeedback is a kind of treatment that utilizes sensors joined to your body to gauge key body capacities. Biofeedback is expected to enable you to take in more about how your body functions. This data may assist you with developing better power over certain body capacities and address wellbeing concerns.
This feedback causes you center around rolling out inconspicuous improvements in your body, for example, loosening up specific muscles, to accomplish the outcomes you need, for example, decreasing agony. Generally, biofeedback enables you to utilize your musings to control your body, frequently to enhance a wellbeing condition or physical performance.
If you have a soccer field with a length of 25 yards and a width of 50 yards what is the area?
Answer:
1250 SQUARE YARDS
Explanation:
The area of the soccer field given the data from the question is 1250 yard²
Area of rectangleArea = Length × Width
How to determine the area of the rectangleLength = 50 yardWidth = 25 yard Area =?Area = Length × Width
Area = 50 × 25
Area = 1250 yard²
Learn more about area of rectangle:
https://brainly.com/question/20693059
#SPJ6
Which of the following are in the correct order from smallest or largest?
A) milimeter, meter,centimer, kilometer
B) milimeter, centimer, meter, kilometer
C) centimer,milimeter, meter, kilometer
D) meter, milimeter, centimeter, kilometer.
What is the biggest star in our universe?
Answer: The largest known star in the universe is UY Scuti, a hypergiant with a radius around 1,700 times larger than the sun. And it's not alone in dwarfing Earth's dominant star.
Explanation:
Thermal energy produced by friction cannot usually be used to do work. true/false
Answer:
false
Explanation:
Work may be done in positive or negative direction. When a work is done in positive direction, it is called useful work, when work is done in negative direction, it is known as useless work. Any energy associated with friction produces useless work. That is, the work is done in negative direction.
Therefore, thermal energy produced by friction can be used to do work but in negative direction.
The correct option is false.