5. between the stone and the ground
for a stone at rest on the ground, we have two forces acting on the stone. first is the force on the stone by the earth due to gravity of earth. second is the force applied by the ground in upward direction to balance the force of gravity on the stone.
so first interaction is between earth and stone : earth pulls stone towards it and stone pulls earth towards it by same amount of force.
second interaction is between stone and ground : ground push the stone in upward direction and stone push the ground in down direction by same amount of force.
hence the correct choice is
5. between the stone and the ground
The stone at rest on the ground is not only interacting with the Earth through gravitational force but also interacting with the ground through what's known as a normal force. The ground pushes up on the stone with a force equal to the stone's weight, balancing out the pull of gravity and keeping the stone at rest.
Explanation:The other interaction involving the stone you're asking about is the interaction between the stone and the ground. According to Newton's third law, every action has an equal and opposite reaction. Therefore, as Earth exerts a gravitational force pulling the stone down, the stone exerts an equivalent force onto the Earth. Similarly, the stone's contact with the ground is also a significant interaction. When the stone rests on the ground, the ground exerts a force (the reaction force or the normal force) that balances the weight of the stone, which is the force due to gravity. As a result, the stone doesn't move further downwards.
Learn more about Forces here:https://brainly.com/question/14215609
#SPJ3
Amy has a mass of 30 kg, and she is riding a scateboard traveling 5 m/s. what is her momentum?
Answer:
Momentum (p) = m . v Kg-m/s
= 30 × 5
p = 150 Kg .m/s
Dave throws a tennis ball straight up into the air he throws the ball with mass of 0.07 kg A speed of 28 m/s and there is no air resistance how high does the ball A speed of 28 m/s and there’s no air resistance how high does the ball go
Dave's ball, with a mass of 0.07 kg thrown at 28 m/s, reaches a maximum height of approximately 40 meters. This is calculated using the conservation of energy principle, equating the initial kinetic energy to the potential energy at the ball's highest point.
Explanation:To determine how high the ball goes when Dave throws it straight up into the air, we can use the principles of physics and the conservation of energy. Given that the ball has a mass of 0.07 kg and is thrown at a speed of 28 m/s, we ignore the air resistance as per the question's instruction. The maximum height (h) reached by the ball can be calculated using the equation derived from conservation of mechanical energy: the kinetic energy at the point of release equals the potential energy at the highest point.
The kinetic energy (KE) when the ball is thrown is KE = (1/2)mv^2, where m is the mass and v is the initial velocity. The potential energy (PE) at the highest point is PE = mgh, where g is the acceleration due to gravity (approximately 9.81 m/s^2) and h is the height. When the ball reaches its highest point, its velocity is 0 m/s, so its kinetic energy is also 0, and all the initial kinetic energy has been transferred to potential energy. Therefore, (1/2)mv^2 = mgh.
Solving for h gives us h = (1/2) * (v^2 / g). Plugging in the values, we get h = (1/2) * (28^2 / 9.81) which equals to approximately 40 meters. So, the ball thrown by Dave reaches a height of roughly 40 meters.
A pendulum swings back and forth and has a kinetic energy of 400 j at a particular point in its path. Which of the following is not true
A- both the kinetic and potential energy are decreasing
B- the minimum kinetic energy is zero
C- when the kinetic energy is zero, the potential energy will be 400 J
D- the potential energy increases when the kinetic energy decreases
A pendulum swings performing back and forth motion and having a kinetic energy of 400 J then both the kinetic and potential energy are decreasing. Hence, option A is correct.
What is Kinetic energy?The energy that an object has as a function of motion is known as kinetic energy. It is described as the effort required to move a surplus body from rest to the indicated velocity. The body will hold onto the kinetic energy it acquired during its acceleration until its speed changes.
The body exerts the same amount of effort when slowing from its current pace to a condition at rest. Formally, angular momentum is any term in the Lagrangian of a system having a time derivative. Mathematically, it is represented as [tex]\frac{1}{2} mv^2[/tex].
Therefore, both the kinetic and potential energy is decreasing, so option A is correct.
To know more about Kinetic energy :
https://brainly.com/question/26472013
#SPJ2
Final answer:
The statement that is not true is 'both the kinetic and potential energy are decreasing,' as this violates the conservation of energy in a swinging pendulum. Energy is transferred from potential to kinetic and vice versa, not decreased simultaneously.
Explanation:
The question relates to the conservation of energy in a swinging pendulum, a common topic in high school physics. Specifically, it concerns the relationship between kinetic energy and potential energy during the pendulum's motion.
When a pendulum swings back and forth, its kinetic energy and potential energy are constantly interchanged. At the highest points of the swing, where the pendulum momentarily stops before changing direction, the kinetic energy is zero and all energy is stored as potential energy. On the other hand, at the lowest point in its path, where the pendulum moves fastest, the potential energy is at its minimum and kinetic energy is at its maximum.
Given this information, let us examine the provided statements:
A- This statement is incorrect because, at a particular point, both energies cannot be decreasing at the same time since energy is being transferred from one form to the other.
B- This is true, as the kinetic energy is zero when the pendulum reaches its highest point.
C- When the pendulum's kinetic energy is zero at its highest point, the potential energy equals the total mechanical energy, which would be 400 J if no energy were lost to friction or air resistance.
D- This statement is correct as it follows the principle of energy conversion, where an increase in potential energy is matched by a corresponding decrease in kinetic energy and vice versa.
Therefore, the statement that is not true is A - both the kinetic and potential energy are decreasing. The potential energy increases when the pendulum reaches the highest points of its swing (where the kinetic energy decreases to zero), and the kinetic energy increases as the pendulum swings downward and potential energy decreases.
hich are made of matter? Check all that apply. air bicycles sound waves people clothes sunlight trees
I believe that air, bicycles, people, clothes and trees are matter however sound waves and sunlight are not. :)
Answer:
air, bicycles, people, clothes, trees
Explanation:
what describes why ocean currents are considered convection currents
Convection occurs because the oceanic waters heat up becoming less dense. This water moves above the cooler water, and give off its heat to the surrounding environment. As it cools, it begins to sink, and the process begins again.
The correct answer is Option B.
Explanation: When a fluid is heated unevenly, it starts moving in convection cells, carrying thermal energy from its warmer parts to its colder parts. Such motion due to temperature differences is called a convection current. Ocean currents may be considered convection currents because warm water rises and cold water moves in to replace it. Warm currents carry thermal energy from warmer regions near the equator toward the poles. Cold currents move toward the equator, making the temperature there lower than it would be otherwise.
What's is the difference between the way Aristotle and Galileo studied nature?
Thus, Aristotle believed that the laws governing the motion of the heavens were a different set of laws than those that governed motion on the earth. As we have seen, Galileo's concept of inertia was quite contrary to Aristotle's ideas of motion: in Galileo's dynamics the arrow (with very small frictional forces) continued to fly through the air because of the law of inertia, while a block of wood on a table stopped sliding once the applied force was removed because of frictional forces that Aristotle had failed to analyze correctly.Thus, Aristotle believed that the laws governing the motion of the heavens were a different set of laws than those that governed motion on the earth. As we have seen, Galileo's concept of inertia was quite contrary to Aristotle's ideas of motion: in Galileo's dynamics the arrow (with very small frictional forces) continued to fly through the air because of the law of inertia, while a block of wood on a table stopped sliding once the applied force was removed because of frictional forces that Aristotle had failed to analyze correctly.Thus, Aristotle believed that the laws governing the motion of the heavens were a different set of laws than those that governed motion on the earth. As we have seen, Galileo's concept of inertia was quite contrary to Aristotle's ideas of motion: in Galileo's dynamics the arrow (with very small frictional forces) continued to fly through the air because of the law of inertia, while a block of wood on a table stopped sliding once the applied force was removed because of frictional forces that Aristotle had failed to analyze correctly.Thus, Aristotle believed that the laws governing the motion of the heavens were a different set of laws than those that governed motion on the earth. As we have seen, Galileo's concept of inertia was quite contrary to Aristotle's ideas of motion: in Galileo's dynamics the arrow (with very small frictional forces) continued to fly through the air because of the law of inertia, while a block of wood on a table stopped sliding once the applied force was removed because of frictional forces that Aristotle had failed to analyze correctly.Thus, Aristotle believed that the laws governing the motion of the heavens were a different set of laws than those that governed motion on the earth. As we have seen, Galileo's concept of inertia was quite contrary to Aristotle's ideas of motion: in Galileo's dynamics the arrow (with very small frictional forces) continued to fly through the air because of the law of inertia, while a block of wood on a table stopped sliding once the applied force was removed because of frictional forces that Aristotle had failed to analyze correctly.Thus, Aristotle believed that the laws governing the motion of the heavens were a different set of laws than those that governed motion on the earth. As we have seen, Galileo's concept of inertia was quite contrary to Aristotle's ideas of motion: in Galileo's dynamics the arrow (with very small frictional forces) continued to fly through the air because of the law of inertia, while a block of wood on a table stopped sliding once the applied force was removed because of frictional forces that Aristotle had failed to analyze correctly.Thus, Aristotle believed that the laws governing the motion of the heavens were a different set of laws than those that governed motion on the earth. As we have seen, Galileo's concept of inertia was quite contrary to Aristotle's ideas of motion: in Galileo's dynamics the arrow (with very small frictional forces) continued to fly through the air because of the law of inertia, while a block of wood on a table stopped sliding once the applied force was removed because of frictional forces that Aristotle had failed to analyze correctly.Thus, Aristotle believed that the laws governing the motion of the heavens were a different set of laws than those that governed motion on the earth. As we have seen, Galileo's concept of inertia was quite contrary to Aristotle's ideas of motion: in Galileo's dynamics the arrow (with very small frictional forces) continued to fly through the air because of the law of inertia, while a block of wood on a table stopped sliding once the applied force was removed because of frictional forces that Aristotle had failed to analyze correctly.
Galileo Galilei's mind opens to physics, and nature controls laws that can be mathematically formulated and written in Sagiatori in 1623:
"There is a philosophy in this great book, the book of the universe, which is always open to us, but we can not understand the book if we do not know the language in which it was written and we do not try to learn the letters ... One can not understand even one word of nature and the universe, Human in a large dark lobby ".
2 - Aristotle believed that the nature of the "first engine" eternal is the source of the infinite movement, and that it is valid and exist outside the universe.
Aristotle is one of the ancient Greek scientists who worked on the interpretation of nature based on their competence in observation, reasoning and reasoning, starting with what they considered truthful facts and analyzing them carefully, believing that this would lead them to the correct conclusions.
By following this philosophy, they undoubtedly reached a number of sound conclusions, including that the universe was governed by a particular system, but there was a fundamental weakness in their philosophy, and their ability to observe was limited because they relied only on their abstract senses. . Many scientists, including Aristotle, for example, thought that planets and stars revolve around Earth, an idea that was then self-evident, and Charles Freeman, in his book "Closing Western Thought." Earth is the center of the universe. "
At what point on the hill with the car have zero gravitational potential energy
A) halfway down the hill
B) at the top of the hill
C)at the bottom of the hill
D) it will never have zero gravitational potential energy
Gravitational potential energy of the car is given by formula
[tex]U = mgh[/tex]
here m = mass of the car
g = gravitational field intensity
h = height of the car from reference point
so here from above formula we can say that if height of the car from reference is zero the gravitational potential energy will be zero
So here we generally took the reference point to be at bottom on the ground
so here also the gravitational potential energy will be zero at the ground
so correct answer will be
C)at the bottom of the hill
Answer:
C) up a hill and then rolling back down the other side.
Explanation:
What are two places in your body where you find smooth muscles
Some places where you can find smooth muscles in your body are,
the walls of your blood vessels,
the walls of your stomach,
the intestines,
and the iris of your eye.
those are just some.
if you need different ones, I have more.
hope i could help!Which experiment would be BEST to investigate the effects of wavelength on diffraction patterns?
A) Send pulses down a slinky at a variety of wavelengths and measure the reflected amplitudes.
B) Strike tuning forks of various frequencies and observe the beat frequencies that are created.
C) Shine lasers of various colors at a narrow slit in an index card and measure the distance between the bright spots.
D) Emit sound waves from a car moving at a variety of speeds and listen to the pitch of the sound as it moves towards and past.
Answer:
Shine lasers of various colors at a narrow slit in an index card and measure the distance between the bright spots.
Explanation:
When the light passes through the narrow opening or the obstacles, it bends. This process is called the diffraction of light. The experiment to investigate the wavelength on the diffraction pattern is " to find the wavelength of laser light with the help of diffraction process ".
In this experiment, a laser light, a slit and the detector is placed on the optical bench. Then the laser light is passes on the slit and diffraction pattern can be seen in the screen.
So, the correct option that shows the best experiment to investigate the wavelength on the diffraction pattern is " Shine lasers of various colors at a narrow slit in an index card and measure the distance between the bright spots ".
If a bicyclist is traveling 60 kilometers in two hours her average speed is?
Her average speed would be 30 kilometers in a hour.
Answer: Her average speed would be 30 kilometers per hour because 60 divided by two is 30 which is how you can calculate the average speed if desired.
Hope this helps! :)
Explanation:
An aircraft carrier runway is about 400 m long. The speed of a standard fighter jet is approximately 641 m/s. Assuming a constant acceleration, if a jet fighter is landing on an aircraft carrier at that speed, how long does it have to slow down to a stop before it falls off the runway?
In this question we have given
length of runway=400m
speed of jet=641m/s
we have to find time to cover 400m distance
we know that
[tex]time=distance/Velocity\\therefore\\Time=400/641\\=.624S[/tex]
if jet fighter is landing on an aircraft carrier at speed of 641m/s then it will have .624S to slow down to a stop before it falls off the runway
The time taken by the aircraft to come to rest on the runway is [tex]\boxed{1.25\text{ s}}[/tex].
Explanation:
Given:
The initial speed of the aircraft on the runway is [tex]641\text{ m/s}[/tex].
The final speed of the aircraft on runway is [tex]0\text{ m/s}[/tex].
The distance covered by the aircraft on runway is [tex]400\text{ m}[/tex].
Concept:
The aircraft moves on the runway and comes to rest under the constant acceleration during its motion. In this case, the acceleration acts in the opposite direction of the motion of aircraft.
The average velocity of a body that has constant acceleration during the motion is defined as the mean of the initial and the final velocity of the body.
Write the expression for the average velocity of the aircraft.
[tex]\boxed{v_{avg}=\dfrac{v_{f}+v_{i}}{2}}[/tex]
Substitute the values of initial and final velocity of the aircraft in above expression.
[tex]\begin{aligned}v_{avg}&=\dfrac{0+641}{2}\\&=320.5\text{ m/s}\end{aligned}[/tex]
The time taken by the aircraft to come to rest can be calculated as the ratio of the distance covered to the average speed of the aircraft.
Write the expression for the time taken by aircraft.
[tex]\boxed{T=\dfrac{v_{avg}}{d}}[/tex]
Substitute the values of distance and the average velocity of the aircraft.
[tex]\begin{aligned}T&=\dfrac{400\text{ m}}{320.5\text{ m/s}}\\&=1.248\text{ s}\end{aligned}[/tex]
Thus, the time taken by the aircraft to come to rest on the runway is [tex]\boxed{1.25\text{ s}}[/tex].
Learn More:
1. The average speed of the car in the entire trip is https://brainly.com/question/504792
2. The effect of change in radius on the angular velocity https://brainly.com/question/5813257
3. The distance at which the tennis ball falls after being hit https://brainly.com/question/2843859
Answer Details:
Grade: High School
Subject: Physics
Chapter: Motion in one dimension
Keywords:
Aircraft carrier, runway, fighter jet, initial speed, landing, comes to rest, acceleration, average velocity, constant, distance, time.
A 9.00 kg mass is moving to the right with a velocity of 14.0 m/s. A 12.0kg mass is moving to the left with a velocity of 5.00 m/s. Assuming that these two balls have a head on collision and stick together, what will be the final velocity of the combination?
Answer:
3.143 m/s
Explanation:
m1 = 9 kg
u1 = 14 m/s
m2 = 12 kg
u2 = - 5 m/s
Let the velocity after the collision is V
By using the principle of conservation of momentum
Momentum of two bodies before collision = momentum of two bodies after collision
m1 x u1 + m2 x u2 = (m1 + m2) x V
9 x 14 - 12 x 5 = (9 + 12) x V
126 - 60 = 21 x V
V = 3.143 m/s
Thus, the velocity of the sticked bodies after the collision is given by 3.143 m/s.
To find the final velocity of two colliding masses sticking together, use the conservation of momentum equation. The total momentum before collision equals total momentum after collision, yielding a final velocity of 3.14 m/s to the right.
To find the final velocity of the combination of the two masses after the collision, we can use the principle of conservation of momentum. The total momentum before the collision is equal to the total momentum after the collision.
Step-by-Step Solution:
Determine the initial momenta of each mass:
Momentum of the 9.00 kg mass:
p₁ = m₁v₁
p₁ = 9.00 kg × 14.0 m/s
p₁ = 126 kg·m/s (to the right)
Momentum of the 12.0 kg mass:
p₂ = m₂v₂
p₂ = 12.0 kg × (-5.00 m/s)
p₂ = -60 kg·m/s (to the left)
Add the momenta to find the total initial momentum:
[tex]p_{total[/tex] = p₁ + p₂
[tex]p_{total[/tex] = 126 kg·m/s - 60 kg·m/s
[tex]p_{total[/tex] = 66 kg·m/s
Calculate the total mass after the collision:
[tex]m_{total[/tex] = m₁ + m₂
[tex]m_{total[/tex] = 9.00 kg + 12.0 kg
[tex]m_{total[/tex] = 21.0 kg
Using the conservation of momentum, the combined mass's final velocity (vf) is given by:
[tex]v_f[/tex] = [tex]p_{total[/tex] / [tex]m_{total[/tex]
[tex]v_f[/tex] = 66 kg·m/s / 21.0 kg
[tex]v_f[/tex] = 3.14 m/s
Therefore, the final velocity of the combination after the collision is 3.14 m/s to the right.
Where would the pauses be in the following sentence? The United States is, in many ways, a nation in love with statistics.
a.
after nation and love
c.
after States and with
b.
after is and ways
d.
none of the above.
Please select the best answer from the choices provided
A
B
C
D
The answer is b. after is and ways. You always pause after a comma before moving on to the rest of the sentence.
Answer:
Explanation:
It's none of the above. The sentence is complete the way it stands. There is no need for any more punctuation.
So the answer is D.
In the diagram, the center dot represents the car, and the arrows represent the forces acting on the car Which term describes the forces acting on the car. A- inertial B- buoyant. C- unbalanced. D- balanced
Answer:
C- unbalanced
Explanation:
The arrow to the right has 1000 N less than the rest of the other forces, this means that the forces are unbalanced and the object is moving left.
The sum of the forces along the horizontal component is not equal to that of the vertical, hence the force acting on the car is an unbalanced force
From the given diagram, we have forces acting in the x and y-direction. In order to determine the nature of the forces acting on the car, we will take the sum of the forces acting on the car as shown:
For the horizontal component;
[tex]\sum F_x =+5000 - 6000\\\sum F_x = -1000N[/tex]
Similarly for the vertical component;
[tex]\sum F_y = 6000 - 6000\\\sum F_y = 0N[/tex]
Since the sum of the forces along the horizontal component is not equal to that of the vertical, hence the force acting on the car is an unbalanced force
Learn more here: https://brainly.com/question/20201508
an object of mass 4 kg is placed on an inclined plane at an angle of 60. if the object slides down the plane with an acceleration of 3m/s, what is the coefficient of the kinetic friction
The forces on the y axis are:
N-mgcos(60)=0 , wich becomes
N=mgcos(60)
Rember that the friction force is always contrary to the motion of an object and its formula is f=μ * N
The forces in the x axis are:
-f + mgsin(60)= m * a
-μ*mgcos(60) + mgsin(60)=m*a ,
μ = ( m*a - mgf=μ[sin(60) )/ ( mgcos(90) )
a ramp with a mechanical advantage of 8 lifts objects to a height of 1.5 meters how long is the ramp
Given data:
M.A. = 8 (No units),
Ramp height (h)= 1.5 m, lifted,
Determine how long is the ramp=?
General formula
Mechanical Advantage = (Ramp length) ÷ (Ramp height),
M.A = l ÷ h
8 × 1.5 = l = 12 m long
length of the ramp l ramp = 12 m
The length of the ramp can be found using the mechanical advantage formula. Given a mechanical advantage of 8 and a height of [tex]1.5 m[/tex], the ramp length is [tex]12 m[/tex].
Determining the Length of the Ramp
To determine the length of the ramp, we can use the formula for mechanical advantage (MA) of an inclined plane, which is given by:
MA = Length of ramp / Height of ramp
From the question, we know the mechanical advantage (MA) is 8, and the height of the ramp is 1.5 meters. Let's use the formula to find the length of the ramp:
[tex]8 = \text{Length of ramp} / 1.5[/tex]
[tex]\text{Length of ramp} = 8 \times 1.5 = 12 m[/tex]
Therefore, the ramp is 12 meters long.
Eric, Sheena, and Yael are playing a game. Eric has half as many points as Sheena. Sheena has two fewer points than Yael. Together, the three players have 52 points. How many points does Yael have?
Show the work plssss... Thank you
Lets say that:
Eric is E
Sheena is S
Yael is Y
We know that S+2=Y, E= 1/S and that E+S+Y=52. So, we can insert S+2=Y and E= 1/S into our other equation, which would bring us to (1/2S)+(S+2)+S=52. This is equal to 1/2S+S+2+S=52. We then use algebra to get the answer:
Given:
S+2=Y
E=1/S
E+Y+S=52
Equation:
1/2S+S+2+S=52
1/2S+S+S=52
2.5S=50
S=50/2.5
S=20
And since Yael has 2 more points then Yael then we do 20+2 and get 22.
Hope this helps! <3
Help me with theses 2 questions please.
1. Describe a situation in which an object gains the same amount of GPE(gravitational potential energy) when two different paths are taken to the same point. Explain (using requirements of work) why this is.
2. Explain what equilibrium and spring constant mean in relation to elastic potential energy.
Thanks if you can help with this.
1)
Answer: A inclined plane and staircase reaching the same height. Work depends on initial and final position only.
Explanation:
The amount of work done does not depend on path length. It depends on initial and final position. It is given by gravitational potential energy.
W = m g h
Where, m is the mass of the object, g is the acceleration due to gravity and h is the height.
Let the mass of the object be m. Two different paths ( one inclines plane and another staircase) are taken to same point. The object would gain same gravitational potential energy because it depends on the height through which the object is taken and not the actual path length.
W ∝ h.
2)
Spring constant can be defined as the ratio of amount of force acting spring with the displacement caused due to the force. A deformed elastic object has elastic potential energy stored in it which is equal to the work done to deform the object. It is proportional to the spring constant and amount of stretched distance.
Equilibrium is reached when the net force acting on the spring is zero. In equilibrium state, the object has natural extension. An object is said to possess elastic potential energy when force is applied and object deforms relative to original equilibrium shape or length.
A ____________ is a machine which contains a lever and a wedge that combine to make work easier.
Answer: Simple machine
The movable inclined plane is called wedge.A simple machine is a machine, which contains lever and wedge, is used to push the things apart. The mechanical advantage of a wedge is given by the ratio of length of its slope to its width.Help with the two questions above? Correct answers?
(6) first choice: the frequency appears higher and wavelength is shorter.
The car approaches a stationary observer and so the sound will appear to have shorter wavelength. This creates an effect of its siren to sound with higher frequency than it would do if both were stationary.
(7) The Doppler formula for frequency in the case of a stationary observer and source approaching it is as follows:
[tex]f_O = \frac{v}{v-v_s}\cdot f= \frac{343\frac{m}{s}}{(343-25)\frac{m}{s}}\cdot 400Hz \approx 431Hz[/tex]
The wavelength is then
[tex]\lambda = \frac{343\frac{m}{s}}{431Hz}\approx 0.80 m[/tex]
The third choice "0.80m; 431Hz" is correct
Putting effort at point IV of this lever offers no mechanical advantage because itA)requires a smaller distance
B)requires a greater distanceC)requires a greater forceD)requires a smaller force
Putting effort at point IV of this lever gives no mechanical advantage because it requires a greater force. So the correct answer is C).
Answer:
c
Explanation:
A street ball whose mass is 2.0 kg is rolling at a rate of 2.8 m/so what is its momentum
Given that
mass of ball ( m) = 2 Kg,
velocity (v) = 2.8 m/s ,
Momentum of ball = ?
We know that "Momentum is simply means, mass in motion
Mathematically,
momentum (p) = m.v
= 2× 2.8
= 5.6 Kg.m/s
=
Which statement best describes the motion of a mass on a spring
Answer:
Motion of mass on a spring can be described as "simple harmonic motion (SHM)". Oscillatory motion that follows Hook's law.a truck drives up a hill with a 15 incline. if the truck has a constant speed of 22m/s, what are the horizontal and vertical components of the trucks velocity
Answer:
speed of truck (v) = 22 m/s ,
angle of hill (Θ) =15°
Find
Vertical component (Fv) = ?
Harizontal component (Fh) =?
Vertical component (Fh) = V cosΘ
= 22. cos 15
= 21.25 m/s.
Harizontal component (Fv) = V sinΘ
= 22. sin 15
= 5.69 m/s.
a. The horizontal component of the truck's velocity is 5.69 m/s.
b. The vertical component of the truck's velocity is 21.25 m/s.
Given the following data:
Angle of inclination = 15°Velocity of truck= 22 m/sTo find both the horizontal and vertical components of the truck's velocity:
a. To find the horizontal component of the truck's velocity:
Mathematically, the horizontal component of velocity is given by the formula:
[tex]V_y = Vsin(\theta)\\\\V_y = 22sin(15)\\\\V_y = 22 \times 0.2588[/tex]
Horizontal component, Vy = 5.69 m/s
b. To find the vertical component of the truck's velocity:
Mathematically, the vertical component of velocity is given by the formula:
[tex]V_x = Vcos(\theta)\\\\V_x = 22sin(15)\\\\V_x = 22 \times 0.9659[/tex]
Vertical component, Vx = 21.25 m/s
Read more: https://brainly.com/question/17742679
If Steve throws the football 50 mentees in 3 seconds what is the average speed (velocity) of the football
(50 meters) / (3 seconds) = (50/3) (meters/sec) = (16 and 2/3) meters/sec .
Speed is correct.
It's NOT velocity.
They're different things.
A 15W fluorescent light bulb uses operates for 30 minutes and produces 20kJ of light energy, what is the percent efficiency of the light bulb? Show work.
Given that ;
Energy (work ) Produced by bulb =20 KJ = 20000 J
Input power = 15 KW
Output power given by the bulb = Rate of doing work
= Work ÷ time
= 20000 ÷ 1800 (since 1 min = 60 seconds)
= 11.11 W
Noe, efficiency is the ratio of output power to input power
η = output power ÷ input power
= 11.11 ÷ 15
= 0.74
= 74%
Efficiency of light bulb is 74%
If you liked the procedure, please give me brainliest
Valcanos can have effect on the
When volcanoes erupt, they emit a mixture of gases and particles into the air. Some of them, such as ash and sulphur dioxide, have a cooling effect, because they (or the substances they cause) reflect sunlight away from the earth. Others, such as CO2, cause warming by adding to the the greenhouse effect.
Volcanoes can have long-term effects on the climate, making the world cooler.
Hope this helps☺
According to Newton’s first law of motion, what must happen to move an object at rest?
Answer:
According to Newton’s first law of motion, a force must act on it to move an object at rest.
Explanation:
According to the Newton's first law of motion, for an object to change its velocity (either a change in the magnitude or the direction), there must be a cause to it which is defined as a net external force.
So for an object to move from rest, an external force must be applied to it.
Final answer:
According to Newton's first law of motion, to move an object at rest, a net external force must be applied. This law, also known as the law of inertia, indicates that an object will not change its state of motion without the influence of an external force. This demonstrates the connection between motion and forces.
Explanation:
According to Newton’s first law of motion, for an object at rest to move, it must be acted upon by a net external force. This law, also known as the law of inertia, explains that without such a force, an object will remain in its current state, whether that is at rest or in motion at a constant velocity. The crucial point is that any change in motion - initiating movement from rest, altering speed, or changing direction - requires the influence of a net external force. This force could be anything from a push or pull, to gravity or friction acting on the object.
The common observation that objects naturally tend to slow down and come to a halt is not due to inertia but rather the result of frictional or other forces acting against the object’s motion. Therefore, to move an object at rest, a force must be applied that is greater than the resisting forces, such as friction. This illustrates the fundamental nature of motion and forces as described by Newton’s first law.
What is a benefit of fossil fuel consumption?
A. Renewable resource
B. Cheap energy
C. Low pollution
D. Increased greenhouse gages
The Benefit of Fossil Fuel Consumption among the Given Options is :
B. Cheap Energy
Because :
✿ Fossil Fuels are Non - Renewable.
✿ They result in High Pollution and Greenhouse Gases.
A benefit of fossil fuel consumption is B. Cheap energy.
Fossil fuels, such as coal and natural gas, are widely available and can generate electricity at a relatively low cost. Despite their environmental drawbacks, including high carbon emissions and pollution, the existing infrastructure and technological development around fossil fuels make them an inexpensive energy source.
During a test, what can a student use to identify what type and how many atoms are in a chemical compound?
common names
chemical names
the International Union of Pure and Applied Chemistry
the National Chemistry Society
The correct tool a student can use to identify what type and how many atoms are in a chemical compound is the International Union of Pure and Applied Chemistry (IUPAC) nomenclature.
The IUPAC nomenclature is a systematic method of naming chemical compounds based on their molecular structure. It provides a standardized way to communicate information about the composition and structure of molecules, including the types of atoms present and their arrangement. By using IUPAC names, one can deduce the molecular formula, which indicates the number and type of atoms in the compound.
For example, the IUPAC name for the compound ethanol is ethyl alcohol. From this name, we can determine that the compound contains two carbon atoms (eth- indicates an ethyl group, C2H5), one oxygen atom (the suffix -ol indicates an alcohol group, -OH), and six hydrogen atoms (since the ethyl group has five hydrogen atoms and the alcohol group has one). Thus, the molecular formula for ethanol is C2H6O, which accurately represents the number and type of atoms in the compound.
Common names and chemical names provided by societies like the National Chemistry Society can sometimes be used to identify compounds, but they may not always provide clear information about the molecular structure or the exact number of each type of atom. These names can be ambiguous or vary by region and language, whereas IUPAC nomenclature is internationally recognized and provides a clear and unambiguous description of the compound's composition.
Therefore, the IUPAC nomenclature is the most reliable tool for a student to use during a test to determine the type and number of atoms in a chemical compound.