scientific theory
hope this helps :)
Answer:
B. scientific theory
Explanation:
The scientific theory explains the phenomenon observed in the natural world. It is based upon the scientific method. To arrive at the scientific theory a hypothesis is formed, experiments are designed and conducted, resulted evaluated, analyzed and conclusions are reached. scientific theory are based upon experiments that are tested under controlled conditions.
What does a particular point on a line of a phase diagram represent ?
Answer:
it is the point where the material turns to gas
Explanation:
Answer: The melting point or boiling point of a substance at a specific pressure
Explanation: That was the correct answer apex.
what is the percentage yield of carbon disulfide if the reaction of 32.0g of sulfur dioxide produces 12.0g of carbon disulfide?
= 63.04 %
Explanation;The balanced equation for the reaction;
5 C + 2 SO2 → CS2 + 4 CO
We can calculate the theoretical yield;
= (32.0 g SO2) / (64 g C/mol) x (1/2) x (76.1418 g CS2/mol)
= 19.035 g CS2 in theory
But;
Percentage yield = Actual yield/theoretical yield × 100%
= (12.0 g) / ( 19.035 g) × 100%
= 0.6304 × 100%
= 63.04%
Final answer:
To calculate the percentage yield of carbon disulfide, we can compare the actual yield to the theoretical yield. Using stoichiometry, we can calculate the theoretical yield based on the given masses of sulfur dioxide and carbon disulfide. The percentage yield is found to be 31.5%.
Explanation:
To calculate the percentage yield of carbon disulfide in this reaction, we need to compare the actual yield (12.0g) to the theoretical yield. The theoretical yield can be calculated using stoichiometry by converting the mass of sulfur dioxide (32.0g) to moles, and then using the mole ratio between sulfur dioxide and carbon disulfide in the balanced equation.
First, let's find the moles of sulfur dioxide:
32.0g SO2 * (1 mol SO2 / 64.06g SO2) = 0.500 mol SO2
According to the balanced equation, 1 mol of SO2 produces 1 mol of carbon disulfide. So, the theoretical yield of carbon disulfide is also 0.500 mol.
Now, we can convert the theoretical yield from moles to grams:
0.500 mol CS2 * (76.14g CS2 / 1 mol CS2) = 38.07g CS2
Finally, we can calculate the percentage yield:
Percentage yield = (Actual yield / Theoretical yield) * 100
Percentage yield = (12.0g / 38.07g) * 100 = 31.5%
what is the bronsted acid of NO2- + H2O HNO2 + OH-
H2O -Bronsted Acid
Explanation;Bronsted-Lowry acids are H+ donors , while Bronsted-Lowry bases are H+ acceptors .A reaction of a Bronsted-Lowry acid and a Bronsted base is a neutralization reaction that is characterized by H+ transfer.The above reaction is an example of base ionization or dissociation where;B (aq) + H2O (l) → BH+ (aq) + OH– (aq)
That is; Base + Acid will give a conjugate acid + hydroxide ion
In our case; NO2- + H2O → HNO2 + OH- ; H2O is the H+ donor and thus, it is a Bronsted Acid.In the gender reaction water acts as the Bronsted acid because it donates a proton to the nitrite ion which in turn acts as the Bronsted base.
Explanation:In the given equation NO2- + H2O -> HNO2 + OH-, the Bronsted acid is H2O. According to the Bronsted-Lowry definition an acid is a substance that can donate a proton (H+), and a base is a substance that can accept a proton. In this reaction water (H2O) donates a proton to the nitrite ion (NO2-) and hence it is the Bronsted acid. The nitrite ion is the Bronsted base because it accepts a proton from water to form nitrous acid (HNO2).
Learn more about Bronsted acid here:https://brainly.com/question/148529
#SPJ3
If 100.0 ml of HCI stock solution is used to make 500.0-ml of a 0.675 M HCI dilution, what is the molarity of the stock solution ?
Answer:
3.375 M.
Explanation:
It is known that the no. of millimoles of HCl before dilution = the no. of millimoles of HCl after dilution.∵ (MV) before dilution = (MV) after dilution.
∴ M before dilution = (MV) after dilution / V before dilution = (0.675 M)(500.0 mL)/(100.0 mL) = 3.375 M.
A chemist needs 22.0 grams of phenol, C6H5OH, for an experiment. how many molecules of phenol would this be?
0.234 mol C[tex]C_{6} H_{5} OH[/tex]
The number of molecules would be - 1.410*[tex]10^{23}[/tex] molecules in 22 grams of phenols.
The molecular formula of Phenol is C6H5OH
, Therefore, molecular weight:
= 6(Mass of carbon) + 6(Mass of hydrogen) + 1 (Mass of oxygen)
= 6 × 12.0107 + 6 × 1.00784 + 15.999 × 1
= 94.11
=> The number of moles of phenols:
=> No of mol of phenol = weight/Mwt
[tex]\frac{weight}{molecular\ weight}\\\\= \frac{22}{94.11}\\[/tex]
= 0.234 moles
=> The number of molecules of phenol would be in 22 grams:
molecules = [tex]6.022 \times 10^{23} *\ (number\ of\ moles)[/tex]
[tex]6.022 \times 10^{23} \times (0.234)\\= 1.410 \times 10^{23}[/tex]
Thus, the number of molecules would be - 1.410 [tex]\times 10^{23}[/tex] molecules.
Learn more:
https://brainly.com/question/22016398
49 POINTS!!! PLEASE HELP ME HURRY!!!
Find the volume of each figure to the nearest tenth.
V = L x W x H
V = 11 x 5 x 6
V = 330
the volume is V = 330 cm
V=L*W*H
What is the period of a wave if the wavelength is 100 and the speed is 200
Wavelength and frequency are inversely proportional to each other. ... Even though the wave speed is calculated by multiplying wavelength by frequency, an alteration in wavelength does not affect wave speed. Rather, an alteration in wavelength affects the frequency in an inverse manner.
❤️Hello!❤️ This is simple question and easy to understand.
so first you use a formula to calculate frequency of the wave.
v _ stands for velocity a.k.a speed
f_ stands for frequency which you have to find.
(pronounced lemda)_ stands for wavelength.
Then you gonna place all your values according to you have in the formula as shown then solve for f.
Finally, you use the time formula
where
T_ is period a.k.a time which equal to the reciprocal of frequency or equal to 1/f.
Simply input your values according to the formula and you your answer as 0.5s Hope this helps! ↪️ Autumn ↩️
How are meteorites and meteors different?
Meteorites are found in space and meteors are not.
Meteorites usually burn up in the atmosphere, but meteors do not.
Meteorites are larger than meteors.
Meteorites have struck the Earth's surface, but meteors have not.
Meteors are a streak of light. A meteorite is when it hits Earth's surface. So, it would be D.
Final answer:
Meteorites have struck the Earth's surface, but meteors have not. Meteorites are meteoroids that land on Earth, whereas meteors are glowing gases in the atmosphere that do not reach the surface.
Explanation:
Meteorites are meteoroids that survive the journey through the atmosphere and hit the Earth's surface. On the other hand, meteors are the glowing trail of gases formed as meteoroids heat up in the atmosphere but do not reach the Earth's surface.
Meteorites can be found on Earth, providing valuable information about our solar system, while most meteors burn up before reaching the surface. The distinction between meteorites and meteors lies in their fate upon entering the Earth's atmosphere.
Emma sings into a microphone. The sound is transferred from the microphone to a loudspeaker that is plugged into the wall. Her voice comes out of the loudspeaker and sounds much louder than before.
In this system, sound energy is being transformed into _______ energy and then back into _______ energy.
Electrical energy and back to sound energy
Electrical then back into sound
Why do you think the process to create a protected area takes so long?
The process to create a protected area takes a long time because there's numerous things that have to be taken in account and sorted out before the area gets that kind of legal status.
Usually there's people living in the area that is supposed to be protected, though it is mostly small settlements. The people living there are connected with that area, use the resources, and their lives are largely based and dependent on it. In order for any problems to be avoided, these people should all be educated, deals to be made with them, and properly negotiated so that the area wouldn't have any damage, but also them to be able to sustain themselves.
The boundaries of the area are also complicated, it it takes time to sort out what parts should be included and what not. Basically to set the priorities.
People should be employed to protect and take care of the area, so they have to undergo a training, education, and to get familiar with it.
The legalization of the area as such can sometimes too make problems and take some time.
Which arrow represents the activation energy of the forward reaction
B) B
Explanation;Activation energy is the least possible amount of energy which is required to start a reaction or the amount of energy available in a chemical system for a reaction to take place.A reaction won’t occur unless atoms or molecules of reactants come together. This happens only if the particles are moving, and movement takes energy. Reactants have to overcome forces that push them apart. The energy is called activation energy.The activation energy for the forward reaction is represented by the arrow from the reactants to the transition state in a reaction diagram.
Explanation:In a reaction diagram, the activation energy for the forward reaction is represented by the arrow from the reactants to the transition state. This arrow shows the energy barrier that must be overcome for the reaction to occur. The activation energy is the minimum amount of energy that reactant particles must have in order to successfully collide and form products.
NEED HELP ASAP
Which statements describe competition for shelter? Check all that apply.
A. Bees work together to construct a beehive.
B. Two prairie dogs fight over underground space.
C. Several monkeys work to create a space for their young.
D. A pack of lions roar to protect their territory from other lions.
E. Penguins push each other to find room on a floating iceberg.
Answers are B, D and E. A and C are cooperation for shelter.
Explanation:
Competition means when more than one person or individual is competing for a certain thing.
For example, two prairie dogs fight over underground space.
This means that both the dogs are fighting to have a house for themselves.
Thus, we can conclude that statements which describe competition for shelter are as follows.
Two prairie dogs fight over underground space.A pack of lions roar to protect their territory from other lions.Penguins push each other to find room on a floating iceberg.What is the porcent of H in NH3
Answer:
17.65 %.
Explanation:
To calculate the % of H in NH₃:% H = [Atomic mass of (3H)/molar mass of NH₃] x 100 = [(3 x 1.0)/(17)] x 100 = 17.65 %.
Convert 23.92inHg to torr.
= 607.568 Torr
Explanation;1 in of mercury is equivalent to 25.4 Torr
Therefore;
23.92 InHg will be equal to;
23.92 × 25.4
= 607.568 Torr
Which statement best describes the use of a chemical indicator in a titration ?
A chemical indicator in a titration experiment must change the color of the solution near the equivalence point.
An elements atomic number is 117 how many electrons would an atom of this element have?
117 because the number of protons and neutrons are the same as the atomic mass.
Final answer:
A neutral atom with an atomic number of 117 would have 117 electrons. The valence shell of element 117 (Tennessine) is likely to have 7 electrons, similar to other halogens, though high atomic number elements can be unpredictable due to their instability.
Explanation:
If an element has an atomic number of 117, it means that a neutral atom of this element would have 117 protons in its nucleus. According to the basic rules of atomic structure, a neutral atom has the same number of protons and electrons. Therefore, an atom of this element would have 117 electrons.
Regarding the valence shell electron configuration, since element 117 (Tennessine, Ts) is in the 17th group of the periodic table and is part of the halogens, its valence shell could be similar to that of other halogens. Considering the periodic trends and the fact that it belongs to the 7th period of the table, its valence shell would likely have 7 electrons. However, due to its high atomic number and unstable nature, the element's chemistry might not entirely follow the trends observed in lighter elements.
Which type of fire is sometimes set as a way to protect a forest?
Surface fire
Explanation;Surface fires are type of forest fires that may burn primarily as a surface fire, spreading along the ground as the surface litter and undergrowth on the forest floor and is engulfed by the spreading flames.They are the easiest fires to put out and cause the least damage to the forest. Surface fires create the least amount of destruction.These fires protects the forest by releasing the nutrients that would otherwise decompose slowly, having little benefit to the ecosystem.Additionally, these fires allow more open spaces for new and different kinds of vegetation to grow and receive sunlight.when iron rusts it no longer conducts electricity this is because
it has gone through the process of a chemical reaction, and is no longer in its original form, which makes it lose its means of conductivity
Final answer:
Iron rusts when exposed to oxygen and water, forming a red-brown hydrated metal oxide called rust. This rust is a poor conductor of electricity compared to iron metal. The rust continually flakes off, exposing fresh metal surface susceptible to further oxidation.
Explanation:
Iron rusts when it is exposed to oxygen and water. The rust that forms on iron is a red-brown hydrated metal oxide known as Fe2O3 xH2O. When iron rusts, it no longer conducts electricity because the rust is a poor conductor compared to the original iron metal. The rust flakes off continuously, exposing a fresh metal surface that is vulnerable to further reaction with oxygen and water.
A particle that has a negative charge:
A)Electrons
B)Neutrons
C)Protons
D)Non-polar Molecule
Answer:
A) electrons
Explanation:
protons are positive , neutrons are neutral , and electrons are negative , and non-polar does not have a charge . so electrons is correct
The particle that has negative charge is electron
What are Electrons?An electron is a negatively charged subatomic particleElectrons in atoms exist in spherical shells of various radii, representing energy levels. The larger the spherical shell, the higher the energy contained in the electron..
Why Other Options are Incorrect?Neutrons is incorrect because it is totally neutral it neither contains positive charge nor contains negative chargeProtons contains positive charge hence the option is incorrectNonpolar molecule is one whose charge distribution is spherically symmetric when averaged over time
Hence Electrons is the correct option (A)
Learn more about Electrons here
https://brainly.com/question/371590
#SPJ2
What is a light year?
A.The distance light travels in one earth year
B.The distance light travels from the sun to the earth
C.The distance light travels in one orbit of the moon
D.The time it takes light to travel across the universe
Final answer:
A light year is the distance light is able to travel in one year in space, which is approximately 9.5 trillion kilometers. It is often used by astronomers to measure large distances between celestial objects such as stars and galaxies. Correct answer to the student's question is option A.
Explanation:
A light year is a unit of distance equal to the distance light travels in one year. When light travels in the vacuum of space, it moves at a speed of about 300,000 kilometers per second(km/s), which is the fastest speed anything can travel in the universe.
Therefore, the true answer to the question is A.
The distance light travels in one earth year. This equates to approximately 9.5 trillion kilometers.
Light-years are commonly used by astronomers to measure vast distances in the universe. For example, the nearest star to us, Proxima Centauri, lies about 4.24 light years away from Earth, and the Andromeda Galaxy, our closest large galactic neighbor, is roughly 2.5 million light years distant.
When we observe celestial bodies like stars and galaxies, we see them as they were years, centuries, or even millennia ago because their light has taken that long to reach us.
a sound waves frequency is 4 hz and its wavelength is 8 meters. what is the waves speed
Answer:
32 m/s
Explanation:
Frequency is the number of waves that pass a particular point in 1 second
Wavelength is the distance between 2 crests or 2 troughs
Speed = frequency x wavelength
Substituting the values
Speed = 4 Hz x 8 m
Speed = 32 m/s
Waves speed is 32 m/s
The speed of the sound wave is 32 meters per second.
To find the speed of the wave, we can use the relationship between speed, frequency, and wavelength, which is given by the equation:
[tex]\[ \text{Speed} = \text{Frequency} \times \text{Wavelength} \][/tex]
Given that the frequency of the sound wave is 4 Hz (hertz) and the wavelength is 8 meters, we can plug these values into the equation:
[tex]\[ \text{Speed} = 4 \, \text{Hz} \times 8 \, \text{m} \] \[ \text{Speed} = 32 \, \text{m/s} \][/tex]
Therefore, the speed of the sound wave is 32 meters per second. This is a fundamental relationship in wave mechanics, where the speed of a wave is the product of its frequency and its wavelength.
Thermal energy is the _____ and internal energy is the _____
Answers.
Average kinetic energy of the particles in an object.
Total energy of particles in an object.
Total translation kinetic energy of the particles in an object.
Answer:
Thermal energy is the Total translation kinetic energy of the particles in an object and internal energy is the Total energy of particles in an object
Explanation:
Answer:
Thermal is total translation kinetic energy of the particles in an object and Internal energy is the total energy of particles in an object
Explanation:
A book is resting on a table. The book has
A)kinetic energy only.
B)potential energy only.
C)both kinetic and potential energy.
D)neither kinetic or potential energy.
Hey there!
The correct answer should be B. Potential Energy Only
Potential energy is the energy stored in an object because it isn’t moving/isn’t in motion
Hope this helps you!
God bless ❤️
xXxGolferGirlxXx
NEED HELP ASAP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Which types of heat transfer involve heat flow from hot objects to colder objects?
A.
convection and conduction, but not radiation
B.
convection and radiation, but not conduction
C.
convection, conduction, and radiation
D.
convection, but not conduction or radiation
A.
convection and conduction, but not radiation
The answer is A, thank you boredpanda for checking my answer probably accendintly.
Hope this helps!
Which of the following is true for the equilibrium constant of a reaction? Its value remains constant at different temperatures. It is a ratio of coefficients of reactants to products. It is represented by the symbol K. Its value is always less than 1.
Answer:
Option C :-It is represented by K.
Explanation:
Equilibrium constant is the ratio of products to reactants.
It has a constant value at specific temperature. If temperature changes, K also changes.
It has a value in the range of 0.001 to 1000.
Answer: Option (c) is the correct answer.
Explanation:
Equilibrium reaction means when rate of forward reaction is equal to rate of backward reaction.
And, relationship between the amount of products and the amount of reactants present in an equilibrium reaction at a given temperature is known as equilibrium constant.
Equilibrium constant is denoted by 'K'.
For example, [tex]xA + yB \rightarrow zC[/tex]
The equilibrium constant for this reaction will be as follows.
K = [tex]\frac{[C]^{z}}{[A]^{x}[B]^{y}}[/tex]
Therefore, it is the ratio of products to reactants. And, if value of K > 1 then it means that the mixture contains mostly products whereas K < 1 means that the mixture contains mostly reactants.
Hence, we can conclude that out of the given options it is represented by the symbol K, is true for the equilibrium constant of a reaction.
Which functional group is found in an ester
RCOOR. the answer is first option
Why are gases less soluble at higher temperature
As the temperature is increased all the molecules including the gas molecules get more kinetic energy, they move faster, and more of them can escape from the solution when they hit the surface meaning fewer molecules stay inside, hence lower solubility.
Final answer:
The solubility of gases in liquids decreases with rising temperature because added thermal energy increases kinetic energy, enabling the gas molecules to overcome the attraction of the solvent molecules and escape back into the gas phase.
Explanation:
The solubility of gases in liquids is affected by temperature. As temperature increases, the kinetic energy of molecules in both the solvent and the solute also increases. Specifically for gases like HCl, NH₃, and SO₂, which are soluble under standard conditions, an increase in temperature causes these gas molecules to have a greater tendency to escape from the attraction of the solvent molecules and revert to the gas phase due to the rise in kinetic energy. Therefore, this leads to a decrease in their solubility within the solvent.
For example, when we heat a solvent that has a gas dissolved in it, we provide thermal energy that overcomes the attractive forces between the gas and solvent molecules. This process is similar to how increased temperature results in higher vapor pressure in pure liquids because thermal energy overcomes the attractive forces between the molecules, allowing them to enter the gas phase.
In summary, the dissolution of most gases is an exothermic process, meaning it releases heat, but when heat is added to the system, it facilitates the separation of the gas from the solution, thus decreasing gas solubility with the rise in temperature
Which of the following statements about air masses is true?
A.
Air masses are areas of condensed water vapor, which are also known as clouds.
B.
Air masses are responsible for creating holes in the ozone layer.
C.
Air masses maintain the same moisture and temperature as they move over new areas.
D.
Air masses are created by patterns of heating and cooling of the Earth's surface.
Answer:
The correct answer is: D. Air masses are created by patterns of heating and cooling of the Earth's surface.
Explanation:
The air masses can be simply be divided into warm and cold ones, further they can be moist or not. The formation of the air masses, be it warm and cold, over the land masses is because of patterns of heating and cooling. This results some areas to produce very large air masses that are cold and dry, like Siberia, or warm and dry large air masses, like Sahara. Also, on a local level there's air masses that develop every day and night, which is noticeable during the night and the morning, where the colder air masses from the mountains move down to the valleys, and the warm air masses from the valleys move up to the mountains. That is a because of the change in the heating and cooling patters that differ during the day and the night.
Answer:
The correct answer is: D. Air masses are created by patterns of heating and cooling of the Earth's surface.
Explanation:
Elements can be represented by chemical symbols. Which of the following is the correct way to write the chemical symbol for sodium?
Na
hope this helps :)
All the elements of a family in the periodic table have what feature in common?
They all have the same number of electrons in the electron cloud.
The have same number of valence electrons
Explanation:The elements in the same group has similar number of valence electrons. For instance All the alkali metals in Group 1 have 1 valence electron, so they all tend to react the same way with other substances. The elements in each group have the same number of electrons in the outer orbital which are responsible for the chemical properties of element so we can say that each family has the same chemical properties.