Consider this situation: A bucket of water, attached to a rope, is being pulled upward out of a well. Of the forces listed, identify which act upon the bucket.
a. Normal Force
b. Gravity Force
c. Applied Force
d. Friction Force
e. Tension Force ​
f. Air Resistance Force

Answers

Answer 1

A bucket of water attached to a rope and is being pulled upwards so the forces that will act on the bucket are Gravity force, tension force, and a little bit of air resistance force will be also acting on the bucket.

What is Tension force?

The force communicated through a rope, string, or wire when two opposing forces draw on it is known as tension. The tension force pulls energy equally on the bodies at the ends and is applied along the entire length of the wire.

Every physical object in contact with another one applies some force to that object. Based on the type of objects, names are given to these contact forces. You can refer to tension as one of the forces acting on an object, such as a rope, cable, or chain.

To get more information about tension force :

https://brainly.com/question/2287912

#SPJ2

Answer 2

Several forces act on the bucket, including gravity, applied force, tension force, friction force and air resistance. The correct options are b, c, d, e and f.

When pulling a bucket of water upward out of a well, several forces act upon the bucket. These forces are:

Gravity Force: This force acts downward, pulling the bucket towards the Earth.Applied Force: The force exerted by the person pulling the rope upwards.Tension Force: This is the force within the rope, pulling the bucket upward.Friction Force: If there is any contact between the bucket and the walls of the well, friction may occur, opposing the motion.Air Resistance Force: As the bucket moves upward, it may encounter some resistance from the air.

In this scenario, the Gravity Force and Tension Force are the most critical in determining the bucket's motion. The normal force does not apply here as it is usually present in scenarios involving surfaces that support objects.

Keeping the Bucket from Falling

1. To keep the bucket from falling back into the well, the force applied (or tension in the rope) must be equal to the gravitational force acting on the bucket.

Work Done by the Rope

2. If the bucket is slowly raised a distance d, the work done on the bucket by the rope is given by the formula:

Work = Force x Distance,

where the force is the tension in the rope acting in the direction of motion.


Related Questions

If the distance from the moon to the satellite is 2.6 × 106 m, what is the mass of the satellite?

HELP

Answers

450kg would be your answer.


Hope it helped you.

Answer:

450

Explanation:

What are the three subatomic particles? Where are they found within an atom? What charge do they each have?

Answers

Electron: negative charge
Neutron: neutral charge
Proton: positive charge

Protons and neutrons from the nucleus while electrons circle around it.

A spacecraft is separated into two parts by detonating the explosive bolts that hold them together. the masses of the parts are 1300 kg and 1700 kg. the magnitude of the impulse on each part from the bolts is 210 n · s. with what relative speed do the two parts separate because of the detonation?

Answers

Ft = mv - mu Choose the frame of reference where initially the spacecraft is at rest - I'm assuming it isn't accelerating. Ft = 300ns taking u=0, First part of craft: 210 = 1300 * v v= 0.25m/s Second part: 210 = 1700 *v v=0.1666m/s These velocities will be in opposite directions so adding them together gives the relative speed of the 2 parts ie. v rel = 0.16666+0.25 = 0.41666m/s

If an object moves with a constant velocity, what is the acceleration of the object? What is the net force acting on the object?

Answers


Acceleration is a change in velocity.  If the velocity is constant,
then there's no change, and acceleration is zero.

Net force on an object always produces acceleration.  If acceleration
is zero, then net force must also be zero.

Final answer:

An object moving with constant velocity has an acceleration of zero and a net force acting on it also zero, as forces are balanced and it is in equilibrium according to Newton's second law.

Explanation:

If an object moves with a constant velocity, the acceleration of the object is zero. This is because acceleration is defined as the change in velocity over time, and if the velocity is constant, there is no change. Therefore, according to Newton's second law, which states F = ma (force equals mass times acceleration), if the acceleration is zero, the net force acting on the object must also be zero. This scenario is true for all objects in equilibrium, whether they are moving at constant velocity or are stationary relative to Earth. Objects in equilibrium have net forces that are balanced, resulting in no acceleration.

As for the net force acting on the object, it would also be zero. When an object travels at constant velocity, it is not accelerating, which means the forces acting on it are in equilibrium—the sum of all forces equals zero. This could include situations such as a car moving at a steady speed on a flat road where the engine's thrust equals the frictional forces opposing it.

What causes the moon's phases?
a. the rotation of the moon on its axis
b. earth's tilt on its axis as it revolves around the sun
c. changes in how much of the sunlit side of the moon faces earth.
d. the position of the moon each month in relation to?

Answers

The answer is:  [D]:  "the position of the moon each month in relation to THE SUN AND THE MOON" .
______________________________________________________
   Note of interest:  The origin of the word "month" was:  "moon-th" — but shortened to "month" — (no coincidence!).
______________________________________________________

C.

Changes in how much of the sunlit side of the moon faces Earth

Pitch describes the loudness of a sound.
True False?

Answers

The answer for this question would be choice B) FALSE because pitch is the quality of sound. *I take no credit for the image below I just found it off google.

How do you calculate force?

Answers

Force (N) = mass (kg) × acceleration (m/s²)

In the 2008 Olympics, Jamaican sprinter usain's bolt average shocked the world as he ran the 100- meter dash in 9.69 seconds. Determine usain's average speed for the race.

Answers

Avg Speed = Total Distance/Total time taken avg speed= 100 m / 9.69sec = 10.3 m/sec.

When joshua brakes his speeding bicycle to a stop, kinetic energy is transformed to select one:?

Answers

Potential energy, I’m pretty sure I don’t know but we was learning this in science and this is all I remember that potential energy is the moment energy reaches to a stop...

Answer:

the answer is heat. pleas give me a thanks if the answer is right

Sean drew this diagram and labeled an unknown gas as gas A. Which gas does A represent?

Answers

Using the information given, gas-A is still completely unknown.

If you divide velocity m/s by time (s), what units do you get?

Answers

Velocity (m/s) ÷ time (s) = displacement (m)

If you divide velocity meters/second by time (seconds )then we would get the acceleration in meters/second², because the rate of change in the velocity is known as the acceleration of the object.

What is acceleration?

The rate of change of the velocity with respect to time is known as the acceleration of the object.

As given in the problem If you divide velocity meters/second by time (seconds )then we have to find the result,

acceleration= meters/second/ seconds

                    =meters/second²

Thus, the object's acceleration is the rate at which its velocity changes. We may determine acceleration in meters/second2 by dividing the object's meters/second velocity by the passage of time.

To learn more about acceleration from here, refer to the link;

brainly.com/question/2303856

#SPJ2

What is the final speed?

Answers

u=6.9ms-¹
a=0.62ms-²
t=3.4s
V=?
using
v=u+at
v=6.9+(0.62×3.4)
v= 6.9+2.108
v=9.008ms-¹

When you open a fridge door is it endothermic or exothermic?

Answers

When you open a fridge door, you let heat into it, therefore, the fridge absorbs heat. This makes the reaction endothermic, since your adding (heat) energy.

Final answer:

When you open a fridge door, the process is endothermic because the refrigerator absorbs heat from the warm air that enters, which cools the inside.

Explanation:

When you open a fridge door, the process is endothermic. The refrigerator absorbs heat from the surroundings to cool the items inside. During this process, the system (inside of the fridge) gains heat from the warm air that enters when the door is open. By convention, the sign of q (the quantity of heat) for an endothermic process is positive because the system is gaining heat. On the other hand, an exothermic process would be like the inside of a freezer making ice, where heat is removed from the water to freeze it, thus releasing heat to the surroundings.

Understanding the endothermic nature of refrigeration is essential for designing efficient cooling systems, as it allows for the controlled absorption of heat to maintain lower temperatures inside the fridge. The principles of endothermic and exothermic processes guide the engineering of various thermal systems, influencing their energy efficiency and overall performance.

What does a DIP sign mean

Answers

Dip. It means there is a dip in the road up ahead. Hope this helped! <3
Final answer:

A DIP sign is a geological term that represents the inclination of a rock layer or feature, which includes the angle of dip and the compass direction. It is recorded using the right-hand rule, with the strike direction being perpendicular to the dip. An example would be 040/30 SE, indicating a strike of 040° and a dip of 30° towards the southeast.

Explanation:

A DIP sign in geological terms refers to the angle at which a rock layer or geological feature is inclined from the horizontal plane. The measurement of the dip includes both the angle of inclination and the compass direction in which the layer is dipping. According to the right-hand rule for geological measurements, if you place your right hand on the dipping layer with your fingers pointed in the direction of the dip, your thumb will point in the direction of the strike. Therefore, the strike is always perpendicular to the dip direction.

For example, if the strike is 040° and the dip is 30°, you would record this as 040/30 SE. This indicates that the geological plane has a strike roughly in the NE direction and dips to the SE at a 30° angle. The indication of the compass direction (SE in this case) is important to confirm that the right-hand rule measurement was performed correctly. Conversely, a dip measurement of 225/30 would imply a NW dip direction, since it is clockwise from the strike.

how is tempature related to kinetic energy

Answers

Ben has $10 to spend on dinner. He an have a pizza deliver red, drive to a burger place, or go to the grocery store to get ingredients for a fresh salad. In the end, he goes with the salad. If each meal would have cost him the same amount, what is Ben's incentive for choosing salad?
Temperature is the average kinetic energy of the particle of matter. The hotter something is the more kinetic energy it has.

An analogy makes a comparison between objects based on their similar qualities. Cassidy wanted to create an analogy for the motion of atoms in solids, liquids, and gases, so she compared them to marbles in a tray. Which best compares the phases of matter to marbles in a tray? A solid is like the tray being shaken and the marbles moving around it, and a liquid is like the tray being shaken slowly and all the marbles moving in their positions. A solid is like the tray being shaken slowly and all the marbles moving in their positions, a liquid is like the tray being shaken and the marbles moving around it, and a gas is like the tray being shaken hard and the marbles moving vigorously around it. A gas is like the tray being shaken slowly and all the marbles moving in their positions, and a solid is like the tray being shaken hard and the marbles moving vigorously around it. A liquid is like the tray being shaken hard and the marbles moving vigorously around it, and a gas is like the tray being shaken slowly and all the marbles moving in their positions.

Answers

A solid is like the tray being shaken slowly and all the marbles moving in their positions, a liquid is like the tray being shaken and the marbles moving around it, and a gas is like the tray being shaken hard and the marbles moving vigorously around it. ---- Let's look at Cassidy's analogy based upon our knowledge of the differences between solids, liquids, and gasses. Solid = atoms are in a fixed relationship to their neighbors. Liquid = atoms are in contact with each other, but not in a fixed relationship. They can move relative to each other. Gas = atoms are in rapid motion and not in contact with each other. Now let's look at the possible answers and see which corresponds to reality. A solid is like the tray being shaken and the marbles moving around it, and a liquid is like the tray being shaken slowly and all the marbles moving in their positions. ** This one has two problems. A gas isn't even mentioned and roles of a solid vs a liquid are swapped. So this is a bad choice. A solid is like the tray being shaken slowly and all the marbles moving in their positions, a liquid is like the tray being shaken and the marbles moving around it, and a gas is like the tray being shaken hard and the marbles moving vigorously around it. ** This sounds like a very good choice. Let's see if the remaining choices are as good or better. A gas is like the tray being shaken slowly and all the marbles moving in their positions, and a solid is like the tray being shaken hard and the marbles moving vigorously around it. ** Two problems here as well. No mention of liquids, and the roles of solids and gasses have been swapped. Bad choice. A liquid is like the tray being shaken hard and the marbles moving vigorously around it, and a gas is like the tray being shaken slowly and all the marbles moving in their positions. ** This one also has problems. The liquid is described the way a gas should be. And the gas is being described like a solid would be. And there's no mention of a solid. So this is a bad choice as well.

Answer:

The answer is b for anyone wondering.

Explanation:

Which of the following best describes what went wrong with the scientists’ study? an improper experimental procedure the lack of a control group selection bias human error

Answers

B- lack of control.

the scientists did not have a proper control group.

Newton Calculation Error

in the book "Principia Mathematica" contains a simple calculation error that was not discovered for 300 years. Errors occur in Proposition Eight, where Newton presents a formula for calculating the mass of the planet, involving angles formed by two specific lines.

Further explanation

The mistakes made by scientists:

Galileo's Tidal Theories

He was wrong from the start, starting his efforts to explain the tidal movements with a false premise - namely that it was caused by the rotation of the earth around the sun. This means the theory is incorrect because it is based on mistakes.

Darwin and the Theory of Heredity

One problem with Darwin's original theory concerns heredity. Many people have a misconception about how characteristics are passed down from parents to their children. The problem is that this notion of mixed genetics contradicts Darwin's own theory. If that is true, then the characteristics will not change from generation to generation through natural selection.

Triple helix from Linus Pauling

Despite getting the Nobel Prize, Pauling admitted there was an error in his discovery. The model is wrong for a very simple reason: This includes the triple helix. He also made a basic mistake in his calculations, and the nucleic acid molecule in his model was actually not acidic.

Edwin Hubble's Universe Calculations

According to Hubble, the universe is two billion years old. This statement is proven wrong. In the 1930s, a study said the earth was between three and five billion years old. Obviously, our planet cannot be older than the universe, so something's wrong with Hubble.

Learn More

Scientist https://brainly.com/question/6701391

The Mistakes from Scientist https://brainly.com/question/6701391

Details

Class: High School

Subject: Physics

Keywords: scientist, mistake, newton

The light-gathering power of a 4-meter telescope is ________ than that of a 2-meter telescope.

Answers

The "meters" measurements refer to the diameter of the objective (the main big-moose lens or mirror).
But light collection depends on the AREA of the objective, and that means the SQUARE of the diameter.
So if you double the 'size' if the telescope, it gathers FOUR TIMES as much light as before.

Final answer:

The light-gathering power of a 4-meter telescope is significantly greater than that of a 2-meter telescope due to the proportional increase in aperture area, allowing it to collect four times as much light.

Explanation:

The light-gathering power of a 4-meter telescope is significantly greater than that of a 2-meter telescope. This is because the light-gathering ability of a telescope is determined by the area of its aperture (the mirror or lens that collects light), and this area increases with the square of the diameter of the aperture. Therefore, a 4-meter diameter telescope has an aperture area that is 4 times larger than that of a 2-meter diameter telescope, allowing it to gather significantly more light.

To illustrate, if a 1-meter telescope collects a certain amount of light, a 4-meter telescope, with 16 times the area, would collect 16 times as much light. Similarly, compared to a 2-meter telescope, a 4-meter telescope, having an area four times greater (since the area is proportional to the square of the diameter), can collect four times as much light.

If a projectile fired beneath the water, straight up, breaks through the surface at a speed of 13m/s, to what height above the water will it ascend

Answers

Final answer:

The projectile will ascend to a height of 9.9 meters above the water's surface.

Explanation:

To find the maximum height above the water, we can use the equations of motion for projectile motion. First, we need to find the time it takes for the projectile to reach the surface of the water. We can use the equation y = v0t + (1/2)at2, where y is the displacement, v0 is the initial velocity, a is the acceleration due to gravity, and t is the time.

Given that the initial velocity is -13m/s (since the projectile is moving in the opposite direction of the acceleration due to gravity), the acceleration due to gravity is -9.8m/s2, and the displacement is 0 (since the projectile breaks through the surface of the water), we can rearrange the equation to solve for t: 0 = -13t + (1/2)(-9.8)t2. By solving this quadratic equation, we find that t = 1.33s or t = 0.

Since the time can't be negative, we discard the t = 0 solution. Therefore, the time it takes for the projectile to reach the surface of the water is t = 1.33s. Now, to find the maximum height above the water, we can use the equation v = v0 + at, where v is the final velocity, v0 is the initial velocity, a is the acceleration, and t is the time.

Using the known values: v = 0m/s (since the projectile comes to a stop at its maximum height), v0 = -13m/s, a = -9.8m/s2, and t = 1.33s, we can rearrange the equation to solve for the maximum height h: 0 = -13 - 9.8(1.33) + h. By solving this equation, we find that h = 9.9m. Therefore, the projectile will ascend to a height of 9.9 meters above the water's surface.

Answer the question below based on the periodic table entry for bromine.



How many neutrons does bromine have?

10
35
45
80

Answers

the answer is 45 i hope i could help
Is has 35 protons, 36 electrons and 45 neutrons.

If an electron loses energy what may happen to it

Answers

When an electron is hit by a photon of lights,it absorbs the quanta of energy the photon was carrying and moves to a higher energy state.Electrons therefore have to jump around within the atom as they either gain or lose energy.

In the formula vy = ayt, what is the value of ay for an object in projectile motion?

–9.8 m/s2
0 m/s2
m/s2
1.0 m/s2

Answers

–9.8 m/s2

Just took it and got it right!

Answer : The correct option is (A) [tex]-9.8\ m/s^2[/tex]

Explanation :

The formula is given as :

[tex]v_y=a_yt[/tex]

Where,

[tex]v_y[/tex] is vertical component of velocity.

[tex]a_y[/tex] is the vertical component of acceleration.

In a projectile motion, the particle moves in a path under the influence of gravity.

So, the vertical component of acceleration is -g i.e acceleration due to gravity.

Hence, the correct option is (a) " [tex]a_y=-9.8\ m/s^2[/tex] ".

How does the mass of an astronaut change when she travels from earth to the moon? how does her weight change?

Answers

Her weight doesn't change but thats only simply because there is no gravity in space.

Answer:

Mass does not change

Weight redueces on the moon

Explanation:

The mass of an object never changes with respect to the astronomical body it is on. The mass of an object is the resistance it provides to a force which is applied.

A 1 kg object is an 1 kg object anywhere in the universe.

Weight is the affect of an astronomical object's gravity on it

[tex]W=mg[/tex]

where,

m = Mass of the object

g = Acceleration due to gravity

[tex]g_e[/tex]=Acceleration due to gravity on Earth = 9.81 m/s²

[tex]g_m[/tex]=Acceleration due to gravity on Moon = 1.62 m/s²

Weight on Earth

[tex]W_e=mg_e\\\Rightarrow W_e=9.81m[/tex]

Weight on Moon

[tex]W_m=mg_m\\\Rightarrow W_m=1.62m[/tex]

Dividing the equations we get

[tex]W_m=\frac{1.62}{9.81}W_e\\\Rightarrow W_m=0.165W_e[/tex]

The weight of the astronaut on the moon will be 0.165 times the weight on Earth.

So, the weight of the astronaut will be reduced on the moon

The shopper pays for his groceries and pushes the shopping cart out of the store, where he encounters a ramp that helps him move the cart from the sidewalk down to the parking lot. What force accelerates the cart down the ramp?

Answers

Gravity accelerates the cart down the ramp

Answer:

Gravitational force will accelerate the cart.

Explanation:

In the given case the cart is on a ramp in this situation the gravitational force is applied normally on the cart and its horizontal component which is [tex]mgcos\theta[/tex] and its vertical component which is [tex]mgsin\theta[/tex] acting along the ramp.

In this situation as we the acceleration is increased by a factor [tex]gsin\theta[/tex] which helps in increasing its acceleration.

Therefore acceleration due to gravity will accelerate the cart.

What are characteristics of a moist, unstable air mass?

Answers

Cumuliform clouds arid showery precipitation, and poor visibility and smooth air 

A moist, unstable air mass is an air mass that has a high moisture content, Low density and Warm temperatures.

Explanation:

A moist, unstable air mass is an air mass that has a high moisture content and is not very dense. This means that the air molecules are not very tightly packed together, which makes it easier for them to rise and form clouds and precipitation.

Here are some of the characteristics of a moist, unstable air mass:

High moisture content: The air mass has a high moisture content, which means that it contains a lot of water vapor.

Low density: The air mass is not very dense, which means that the air molecules are not very tightly packed together.

Warm temperatures: The air mass is typically warm, which means that the water vapor can easily evaporate and form clouds.

Turbulence: The air mass is often turbulent, which means that there are strong winds and eddies that can help to mix the air and promote cloud formation.

Find more exercises on unstable air;

https://brainly.com/question/28139476

#SPJ6

How do fission nuclear reactions differ from fusion nuclear reactions?

Answers

The path of the raction occurs on the basis of mass of the nuclei involved in reaction.
In case of nuclear fusion, two or more nuclei having less mass fuse(combine, join) together to form a new nuclei(heavier mass but it is relatively stable). During fusion, matter is not conserved because some of the matter is converted into energy(light). This reaction evolves a huge amount of energy and there comes Einstein's famous Energy-mass equivalence formula E=mc^2! :D. The nuclear reaction occuring in stars(including our sun ) is "fusion".

Fission occurs with heavier nuclei such as that of Uranium-235. Which splits into smaller subatomic particles like gamma, neutrons and enormous amount of energy.
Both, Fission and Fusion releases enormous amount of energy and modern nuclear weapons works on the principle of nuclear fission.

The correct answer is C.Fission reactions are used to generate electricity for consumers, but fusion reactions are not. This is according to my online study class I just took. Hopefully i have helped! :)

Which of the following is a supersonic speed? Mach 0.005 Mach 0.05 Mach 0.5 Mach 5

Answers

Mach 5. Mach 1 is defined as the speed of sound. The number after “Mach” is the multiplier. So Mach 5 is 5x the speed of sound.

I just had this question, the correct answer is March 5

Sources of natural gas include all of the following except:

flyash

oil wells

biomass

landfills

Answers

Answer: fly ash

Oil well, biomass and landfill are the sources of the natural gas. But fly ash is not the source of natural gas because it is formed by the combustion of the coal during the electricity generation process.

Oil well is a boring inside the earth crust which is digg open to obtain crude oil such as petroleum but the natural gas which sometimes lies above the liquid petroleum also collected.

Biomass is the reservoir of organic matter it is main composition of all living organisms. The decaying matter is a form of biomass. This biomass releases natural gason decomposition.

Landfill is the area where the biodegradable waste is disposed off. The action of biological agents such as bacteria feed upon these wastes and release natural gas.

Hanna tosses a ball straight up with enough speed to remain in the air for several seconds?
a.what is the velocity of the ball when it reaches its highest point?
b.what is the velocity 1 s before it reaches its highest point?
c.what is the change in its velocity during this 1-s interval?
d.what is its velocity 1 s after it reaches its highest point?
e.what is the change in velocity during this 1-s interval?
f.what is the change in velocity during the 2-s interval(caution velocity not speed)?
g.what is the acceleration of the ball during any of these time intervals and at the moment the ball has zero velocity

Answers

A) the velocity is 0 m/s

Answer:

Explanation:

In the free fall motion we have that the acceleration is constant and produced by gravity, this acceleration has a magnitude of 32 ft/s2 or 9.8 m/s2 depending on the units you are working with. This means that every second the speed changes a magnitude of 32 ft/2, the velocity will depend of whether the ball is going upward (positive) or downward (negative).

A) At the highest point the ball stops to start the descend, here v=0 ft/s

B) +32 ft/s. The vector is going up, in the next second the velocity is going to be 0 (negative acceleration)

C) V=vf-vo=0-32=-32 ft/s is the constant change in velocity in projectile motion

D) -32 ft/s. The vector is pointing downward

E)  V=vf-vo=-32-0=-32 ft/s is the constant change in velocity in projectile motion, 32 ft/s per second

F) Delta V=vf-vo=-32-32=-72 ft/s

g) gravity acceleration is constant 32 ft/s2 (pointing downward vector)

In the circuit diagram, what does the symbol made of two long lines and two short lines with a positive and a negative sign at each end represent? a source of electrical energy an electrical conductor an electrical resistor a closed switch

Answers

For those seeking for the answer, its a source of electrical energy.

Answer:

its a source of electrical energy.

Explanation:

Other Questions
What was the war between the christianity and islam for control of the holy land? In beijing in 2008 the womens 3,000 meter steeplechase became an olympic event what is the distence in kilometer What is a useful way to differentiate among ability tests?a. speed, powerb. physical, mentalc. content, breadthd. length, depth? What makes an argument persuasive Union General William Sherman was tasked with attacking and defeating -------during the latter months of the Civil War. solve for v 160=11-v A hexadecimal number is a number written in the base 16 number system. a. True b. False subtract.5 1/32 1/3Enter your answer in the box as a simplified mixed number. A client with chronic renal failure has a serum potassium level of 6.8 meq/l. what should the nurse assess first Round each decimal to the nearest one then subtract $3.85-$2.17 WHAT IS THE EQUATION OF POINT SLOPE FORM True/False Indicate whether the sentence or statement is true or false. The red land was widely used for farming by ancient Egyptians because it was so fertile. How are the romans penalties for the similar or different from the laws and penalties of the United States today? Which property is shown in the following equation?20 x 1 = 20A. Zero property of multiplicationB. Identify property of multiplicationC. Negative one property of multiplicationD. Identify property of division What does CPCTC mean in Geometry AND when it is used? What modernized weapon was most effective in the Great War and why? Find the limit. lim 0 sin(3) + tan(4) What is the relationship between force and potential energy? What is 33/40 as a decimal? Please explain how you got it. 1.Margo read two epics.The first epic is the story of a soldier who got lost at sea and sailed for many years before finding his way home. While he was gone, his family struggled financially. Knowing how much their father valued his ancestors homeland, his children refused bribes of food and money offered in exchange for the land. They preferred to live humbly and proudly. Upon his return, their fathers joy was boundless, which pleased his sons and daughters.The second epic is the story of a great leader and prince who was banished from his home by an evil cousin. While traveling and living a simple life in the forest, the prince met and married a princess. Despite their royal backgrounds, neither of them minded living safely hidden in the forest. This humility saved their lives on a number of occasions, and their great happiness did not depend on living in a castle.When comparing these two myths, what qualities do both myth-tellers seem to value?A.cleverness and witB.humility and humblenessC.physical strength and agilityD.home and property Steam Workshop Downloader