In front of the room are 6 flasks of different sucrose solutions. the flasks contain solution that are either 0.0 m, 0.2 m, 0.4 m, 0.6 m, 0.8 m, or 1.0 m sucrose. unfortunately my colleague for got to label the flasks. devise a method for quantitatively determining which flask holds which solution.
To determine which flask holds which sucrose solution, you can use a method called titration. This involves adding a known solution that does not contain sucrose to each flask and noting when the indicator solution changes color. By comparing the volumes of the known solution required for each flask, you can determine the relative concentrations of the sucrose solutions.
Explanation:In order to determine which flask holds which solution, we can use a method called titration. Here's how it works:
Take a small sample from each flask and add a few drops of an indicator solution that changes color in the presence of sucrose.Start with the lowest concentration flask and slowly add a known concentration of a different solution (e.g., water) that does not contain sucrose.Continue to add the known solution until the indicator solution changes color, indicating that all the sucrose in the flask has reacted with the added solution.Repeat this process for each flask, starting with the lowest concentration and working your way up.By comparing the volume of known solution required to change the color of the indicator in each flask, you can determine the relative concentrations of the sucrose solutions.
A scientist has been collecting data on the soil composition in a forest after a wildfire. Every year she visits the forest and takes a sample from the same area. She then analyzes the sample and determines its content. She plans on collecting data for ten years and then determining the trends that have occurred. Which type of investigation is the scientist performing?
collective
comparative
experimental
descriptive
Final answer:
The scientist is conducting descriptive research, documenting soil composition changes in a forest over time without manipulating the environment.
Explanation:
The scientist performing an investigation by collecting soil composition data in a forest after a wildfire and analyzing it for trends over ten years is conducting descriptive research. This type of investigation involves documenting and describing changes in the environment without manipulating any variables. Descriptive research aims to accurately portray the characteristics of a particular individual, situation, or group over time and is foundational in natural sciences, including soil science and ecology.
In contrast to experimental research, which involves creating a controlled environment to test specific hypotheses, descriptive research documents real-world phenomena as they naturally occur. Moreover, this type of research is crucial for understanding ecological succession, how ecosystems recover after disturbances, and for guiding conservation and management practices.
A sample of aluminum metal absorbs 10.3 j of heat, upon which the temperature of the sample increases from 23.2 °c to 30.5 °c. since the specific heat capacity of aluminum is 0.90 j/g-k, the mass of the sample is ________ g.
A cone with a mass of 6 g has a radius measuring 5 cm and a height of 2 cm. What is its density?
Answer: The density of cone is [tex]0.115g/cm^3[/tex]
Explanation:
The equation used to calculate the volume of cone is:
[tex]V=\frac{1}{3}\pi r^2h[/tex]
where,
V = volume of cone
r = radius of the cone = 5 cm
h = height of the cone = 2 cm
Putting values in above equation, we get:
[tex]V=\frac{1}{3}\times (3.14)\times (5)^2\times 2\\\\V=52.33cm^3[/tex]
To calculate volume of a substance, we use the equation:
[tex]\text{Density of a substance}=\frac{\text{Mass of a substance}}{\text{Volume of a substance}}[/tex]
We are given:
Mass of cone = 6 g
Volume of cone = [tex]52.33cm^3[/tex]
Putting values in above equation, we get:
[tex]\text{Density of cone}=\frac{6g}{52.33cm^3}\\\\\text{Density of cone}=0.115g/cm^3[/tex]
Hence, the density of cone is [tex]0.115g/cm^3[/tex]
Using the Law of Conservation of Matter, determine the number of grams of iron sulfide (FeS) that will be produced in this reaction.
112g Fe + 64g S → _____ g FeS
Answer:
112g + 64g = 176g
Explanation:
Just pretty much put the things together or add them
Determine the volume of a 75-gram sample of gold at stp
The volume of a 75-gram sample of gold at STP is approximately 3.886 cubic centimeters, calculated using the formula V = m/d, where m is the mass and d is the density of gold.
Explanation:To determine the volume of a 75-gram sample of gold at standard temperature and pressure (STP), we must use the formula that relates mass (m), density (d), and volume (V), which is m = dV. Since the density (d) of gold is 19.3 g/cm³, we can rearrange the formula to solve for volume: V = m/d.
By plugging in the mass of the gold sample and the given density, we get:
V = 75 g / 19.3 g/cm³ = 3.886 cm³
Therefore, the volume of a 75-gram sample of gold at STP is approximately 3.886 cubic centimeters.
Learn more about Volume of Gold here:https://brainly.com/question/18459933
#SPJ3
The element that is shiny in appearance quite dense and liquid at room temperature is
Which microscopic field contains a hypertonic solution answers?
A hypertonic solution has a higher osmolarity than a cell's cytoplasm, leading to water exiting the cell, known as crenation in red blood cells and plasmolysis in plant cells.
Explanation:A hypertonic solution is one where the extracellular fluid has a higher osmolarity than the cytoplasm of a cell, causing water to move out of the cell. In such a solution, cells will lose water and shrink, which can be observed in red blood cells as crenation. Additionally, in plant cells, this phenomenon can result in the cell membrane detaching from the cell wall, known as plasmolysis.
If the Density of an object is 5.2 g/cm 3 , and its volume is 3.7 cm 3 , what is its mass?
Answer: mass = 19 grams
Explanation: Density is directly proportional to mass and indirectly proportional to the volume. So, the density formula is:
[tex]density=\frac{mass}{volume}[/tex]
density and volume are given and the question asks to calculate the mass. So, the formula could be rearranged as:
mass = density x volume
Given density is [tex]\frac{5.2g}{cm^3}[/tex] and the volume is [tex]3.7cm^3[/tex] .
Let's plug in the values in the formula to calculate the mass:
mass = [tex]\frac{5.2g}{cm^3}*3.7cm^3[/tex]
mass = 19.24 grams
Both the density and volume have two sig figs, so if the answer is round off to correct number of sig figs then the mass will be 19 grams.
A pill claims that it stops acne. A label on the bottle reads: "This product has not been tested by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease." What can you conclude about this product?
A. There is little evidence for this claim
B. There is no known treatment for acne
C. This product is made by doctors
D. This product will stop acne
PLEASE NEED HELP
If an atom has 34 electrons, 46 neutrons, and 34 protons, what is its mass number? what is the name of the element?
calculate the empirical formula from the given percent compositions. 82% nitrogen (N), 18% hydrogen (H)
To calculate the empirical formula from percent compositions, convert the percent composition of each element to grams, then to moles, and finally, divide the moles by the smallest number of moles obtained. In this case, the empirical formula is C5H7N.
Explanation:The empirical formula can be calculated by finding the moles of each element in the compound using their percent compositions. In this case, we have 82% nitrogen, which corresponds to 82 grams, and 18% hydrogen, which corresponds to 18 grams. Next, we convert the grams to moles using the molar mass of each element. The molar mass of nitrogen (N) is 14 grams/mol, and the molar mass of hydrogen (H) is 1 gram/mol. Dividing the moles by the smallest number of moles obtained gives us the empirical formula. For this compound, the empirical formula is C5H7N.
Learn more about empirical formula here:
https://brainly.com/question/32125056
#SPJ11
Pure quartz and the gemstone amethyst are nearly alike chemically. what physical property would be used to tell them apart
An unknown substance is made only of identical atoms that cannot be broken down. this substance is a ________.mixtureelementcompound
What conditions increase the rate of weathering erosion and mass wasting?
The molar mass of the compound was found to be 30.069 g/mol. what is the molecular formula? express your answer as a chemical formula.
For us to accurately determine what compound this is, additional info must be given. However I can suggest two compounds which have molecular mass of about 30.07 g/mol.
1. It could be NO or nitric oxide.
The molecular mass is 16 + 14= 30 g/mol
But if we search the exact weight, it is 30.01 g/mol
2. It could also be (CH3)2 or ethane.
The molecular mass is 2*12+ 6*1= 30 g/mol
But if we search the exact weight, it is 30.07 g/mol.
So we could say it more likely to to be (CH3)2
Answer:
C2H6
Explanation:
There is no central carbon atom therefore you can put subscripts on both atoms.
A sample of 254.2 grams of copper completely reacted with oxygen to form 286.2 grams of a copper oxide product. how many grams of oxygen must have reacted?
Final answer:
To calculate the grams of oxygen that reacted, subtract the mass of copper (254.2 grams) from the mass of the copper oxide product (286.2 grams) to get 32.0 grams of oxygen.
Explanation:
To find out how many grams of oxygen reacted with copper to form copper oxide, perform a mass difference calculation from the given data. The law of conservation of mass states that mass is neither created nor destroyed in a chemical reaction. Therefore, the mass of products formed in a reaction equals the mass of reactants.
The initial mass of copper is given as 254.2 grams, and the final mass of the copper oxide product is 286.2 grams. To find the mass of oxygen that has combined with the copper, subtract the mass of copper from the mass of the copper oxide product:
Mass of oxygen = Mass of copper oxide – Mass of copper
Mass of oxygen = 286.2 grams – 254.2 grams
Mass of oxygen = 32.0 grams
Therefore, 32.0 grams of oxygen must have reacted with the copper.
When magnesium reacts with chlorine, magnesium ions (mg 2 ) and chloride ions (cl−) are formed. in this reaction, magnesium atoms?
If you are given the mass number and atomic number of an atom explain how you would find the number of protons neutrons and electrons
It is said that hclo4 is a strong acid, whereas hclo2 is a weak acid. what does this mean in terms of the extent to which the two substances are ionized in solution?
The distinction between a strong acid (HClO₄) and a weak acid (HClO₂) lies in the extent of ionization in the solution. Strong acids ionize fully, while weak acids only partially ionize.
A strong acid is one that completely ionizes in water, while a weak acid only partially ionizes. The extent to which a substance is ionized in solution is determined by its dissociation constant (Ka).
HClO₄ is considered a strong acid because it fully dissociates into its ions when dissolved in water.
HClO₂ (chlorous acid), is a weak acid. It only partially ionizes in water, meaning that only a fraction of the HClO₂ molecules dissociate into H+ and ClO⁻² ions. As a result, the concentration of H+ ions in the solution is lower compared to a strong acid like HClO₄, resulting in a weaker acidity.
To learn more about the ionization, follow the link:
https://brainly.com/question/1602374
#SPJ6
While forming a hypothesis, a scientist has to look into a problem
creatively
partially
hypothetically
theoretically
Answer: Option (d) is the correct answer.
Explanation:
A hypothesis is referred to as an idea which might be a possible explanation for a particular experiment or situation but it is not necessarily correct.
So, in order to form a hypothesis, a scientist has to theoretically look into the problem so that he can provide or suggest a possible explanation for the same.
This is because when the scientist looks theoretically into a problem then he will check all the steps in detail and its possible outcomes or results. This will lead to a possibility that the suggested hypothesis will be correct.
Cao(s) reacts with water to form ca(oh)2(aq). if 6.50 g cao is combined with 99.70 g h2o in a coffee cup calorimeter, the temperature of the resulting solution increases from 21.7 °c to 43.1 °c. calculate the enthalpy change for the reaction per mole of cao. assume that the specific heat capacity of the solution is 4.18 j/g×k.
The heat of reaction is -79.2 kJ/mol.
The equation of the reaction is;
CaO(s) + 2H2O(l) ------> Ca(OH)2(aq) + H2(g)
Number of moles of CaO = 6.50 g/56 g/mol = 0.12 moles
Number of moles of H2O = 99.70 g/18 g/mol = 5.53 moles
Temperature rise = 43.1 °C - 21.7 °C = 21.4 °C
Total mass of solution = 99.70 g + 6.50 g = 106.2 g
We must obtain the limiting reactant as follows;
1 mole of CaO reacts with 2 moles of H2O
0.12 mole of CaO reacts with 0.12 mole × 2 moles/1 mole = 0.24 moles
We can see that CaO is the limiting reactant.
Heat absorbed = 106.2 g × 4.18 J/g-1K-1 × 21.4 °C = 9.5 kJ
Heat of reaction = -(9.5 kJ/0.12 moles) = -79.2 kJ/mol
Learn more: https://brainly.com/question/7558603
The following statement is a(n) _____.
There is a significant difference between how elderly people and young people feel about politics.
hypothesis
opinion
scientific law
problem
Answer:
Opinion
Explanation:
This is an opinion, actually. A Hypothesis has an "if/then" statement, for example, "IF I do not tie a knot at the end of a balloon THEN it will deflate". A scientific law states a fact that can be proven, such as Newtons Laws. A problem is the question you ask without making an educated guess.
Hope I helped! :)
If a potassium atom has an atomic number of 19 and a mass number of 39, how many protons, electrons, and neutrons are in the atom?
Answer: The Atom would have:
9 protons
19 electrons (since atoms are electrically neutral and have the same number of electrons as protons)
20 neutrons
Explanation: Hope this Helps.
Where do the protons and electrons come from that are used in the electron transport chain?
When a hydrogen atom in one water molecule is attracted to the oxygen atom of an adjacent water molecule, a ________ bond forms.
a.covalent
b.hydrogen
c.polar
d.bipolar?
Why do solids maintain thier shape,whereas fluids do not?
A group of scientists is trying to launch an object into orbit, and the object is traveling at 6500 m/s. Which best explains why the object will not successfully orbit Earth?
Answer:
The object is not traveling fast enough to match Earth’s curvature.
Explanation:
c on edge
Suppose you conduct an experiment to determine how temperature affects the amount of salt which can be dissolved in 100 ml of water. what is the independent variable?
Molarity how can the concentration of a solution be expressed quantitatively answer key
Final answer:
Molarity is a quantitative measure for the concentration of a solution, defined as the number of moles of solute per liter of solution, and is calculated by dividing moles of solute by liters of solution.
Explanation:
The concentration of a solution can be quantitatively expressed using molarity, which is one of the most frequently used methods by chemists. Molarity is defined as the number of moles of solute per liter of solution. To calculate the molarity of a solution, you must first determine the amount of solute in moles and then measure the total volume of the solution in liters. For example, if you have 1.5 moles of NaCl dissolved in 0.500 liters of solution, the molarity (M) of the solution is calculated by dividing the number of moles of solute by the number of liters of solution, resulting in a 3 molar (3 M) solution of NaCl.