Answer:
hafnium: atomic number 72
Phosphorus :Atomic number 15
Rhodium :Atomic number 45
Osmium: atomic number = 76
Magnesium: atomic number = 12
Identify and DESCRIBE the main kinds of storms. EXPLAIN how each forms. answer plz
There are numerous types of storms, each of them having their own unique characteristics, and unfortunately all of them being able to cause a lot of damage. Some of them are:
- Derecho storms
These are series of storms that stretch for over 240 mph. They have winds of over 58 mph, and they are very unpredictable.
- Flooding
The flooding occurs when there's excessive rainfall that over-saturates the water bodies and the soil with water, causing floods.
- Hail storm
They occur in the warm periods, coming in the shape of circular-shaped ice stones. This type of storm causes lot of damage through the power of the ice stones.
- Snow storm
The snow storms occur in the cold periods. They are excessive snowfalls, often accompanied with strong winds, managing to pile up enormous amounts of snow in a short period of time.
- Hurricanes
They are one of the most dangerous storms. They bring in lot of rainfall, but also very strong winds that manage to pull out trees, vehicles, and damage houses.
It the air in a carton of milk was allowed to warm up, what would happen to it?
Answer:
Very Likely B.
Explanation:
Increasing temperature inside a closed container - keeping everything constant will make pressure increase. Because the energy being held by the molecular (the gas molecules) rises, the container may expand meaning the volume increases.
Heated air would go into the solution in the milk if the air in a carton of milk was allowed to warm up with increased pressure. Hence, option B is correct.
What do intermolecular forces do?Intermolecular forces hold multiple molecules together and determine many of a substance's properties.
Increasing temperature inside a closed container while keeping everything constant will make pressure increase due to a rise in the randomness of the molecules.
The volume of the air would attempt to increase with temperature, so the carton (if flexible) could begin to swell under the increased pressure, possibly to the point that it would leak out of the carton or even burst the seam.
Also, but of less importance, more of the heated air would go into the solution in the milk.
Learn more about the intermolecular forces here:
https://brainly.com/question/9007693
#SPJ2
How many liters of a 0.352 M solution of Ca(SO4) would contain 62.1 g of Ca(SO4)?
Answer:
1.3 L.
Explanation:
Molarity is the no. of moles of solute per 1.0 L of the solution.M = (no. of moles of CaSO₄)/(Volume of the solution (L))
M = 0.352 M.
no. of moles of CaSO₄ = mass/molar mass = (62.1 g / 136.14 g/mol) = 0.456 mol,
Volume of the solution = ??? L.
∴ (0.352 M) = (0.456 mol)/(Volume of the solution (L))
∴ (Volume of the solution (L) = (0.456 mol)/(0.352 M) = 1.296 L ≅ 1.3 L.
Jon is running for city council and wants to campaign on human development goals for his community. Which issue should he use? A. better roads B. less traffic C. lower taxes D. higher taxes E. better schools
Answer:
E. better schools
Explanation:
This contributes the most to human development in his community because it provides children with more resources and better opportunities than a sub-par education system. If a community is able to better their school system, they will begin to see a lot of positive changes in their area.
Answer:
E. better schools
Explanation:
It's the only one that falls into the category in human development .
Which reactions are oxidation-reduction reactions? Check all that apply
Answer: options C and D
Explanation: in Redox reaction (oxidation-reduction), oxidation numbers of Reactant and product are different.
In oxidation, oxidation state increases and decreases in the case of Reduction.
In C, oxidation state of C is increased from +3 in C3H6 to +4 in CO2 hence oxidation and oxidation of O2 Decreased from 0 to -2 in H2O, hence Reduction. So it is a redox reaction
Similarly in D, Fe: +3 to 0
Carbon : +2 to +4.
Oxidation-reduction (redox) reactions involve changes in oxidation number and the transfer of electrons. Examples include reactions of magnesium with oxygen copper with silver nitrate and hydrogen peroxide with manganese dioxide.
Explanation:Oxidation-reduction (redox) reactions are those in which one or more elements involved undergo a change in oxidation number. These reactions can be identified by the transfer of electrons from one reactant to another. Examples of oxidation-reduction reactions include the reaction of magnesium with oxygen to form magnesium oxide, the reaction of copper with silver nitrate to form copper nitrate and silver, and the reaction of hydrogen peroxide with manganese dioxide to form water and oxygen.
Learn more about Oxidation-reduction (redox) reactions here:https://brainly.com/question/33439595
#SPJ2
During Trial 2, what allowed you to determine that aluminum was the limiting reactant? Check all that apply
Answer:
All of the aluminum dissolved.
The molar ratio of copper(II) chloride to aluminum was greater than 3:2, the equation’s molar ratio.
Explanation:
Answer:
b and e
Explanation:
i just got it right
Which of these is a freshwater reservoir?
A. Gulf of Mexico
B. Pacific Ocean
C. Atlantic tidal basin
D. Antarctic polar ice
Antartic polar ice is the answer.
The correct answer is D. Antarctic polar ice.
A freshwater reservoir is a place where freshwater is stored. The options given include bodies of water and ice formations, so let's evaluate each one:
A. Gulf of Mexico: This is a body of water connected to the Atlantic Ocean and is saline, not freshwater.
B. Pacific Ocean: This is the largest ocean on Earth and contains saltwater, not freshwater.
C. Atlantic tidal basin: Tidal basins are typically found along coastlines where rivers meet the sea. The water in these basins is a mix of freshwater and saltwater, known as brackish water, but it is not a freshwater reservoir.
D. Antarctic polar ice: This option refers to the ice sheets and glaciers found in Antarctica. These are massive accumulations of freshwater in the form of ice. When this ice melts, it provides freshwater. Therefore, the Antarctic polar ice is indeed a freshwater reservoir.
In conclusion, the Antarctic polar ice is the only option that represents a freshwater reservoir, making option D the correct choice.
PLEASE SEE I NEED HELP?!
Jaime knocks on Roy's front door. The energy from Jaime's hand striking the door causes it to vibrate, which causes air particles on the other side of the door to carry a sound wave toward Roy's ear. The sound wave travels toward Roy as the air particles A. move a short distance toward the door until they collide with other air particles. B. move up and down with the sound wave but do not move away from the door. C. move the entire length of the wave away from the door and toward Roy. D. move a short distance away from the door until they collide with other air particles.
Answer:
i had this on study island the answer is "move a short distance away from the door until they collide with other air particles."
Explanation:
hope this helped :)
The sound wave travels toward Roy as the air particles move up and down with the sound wave but do not move away from the door. Therefore, the correct option is option B.
What is sound wave?Sound is a mechanical disturbance that travels through an elastic medium and disrupts an equilibrium condition. It is also feasible to define sound solely subjectively, as something which is heard, however this definition is overly limited and not very instructive.
Because it is important to discuss sounds that are created by devices like sonar that are not audible to the human ear, like dog whistles. The characteristics of sound waves should be the starting point for studying sound. The sound wave travels toward Roy as the air particles move up and down with the sound wave but do not move away from the door.
Therefore, the correct option is option B.
To know more about sound wave, here:
https://brainly.com/question/29767263
#SPJ3
When looking at the endoplasmic reticulum of a cell, the microscope zooms in enough to see ribosomes that are embedded in the outside of the endoplasmic reticulum. Which type of endoplasmic reticulum is this?
A. Solid
B. Smooth
C. Rough
D. Bumpy
Answer:
Rough.
Explanation:
The presence of ribosome on enfoplasmic cisterna make it rough.. Called RER
Answer:
C. Rough
Explanation:
When ribosomes are attached to the outer surface of an endoplasmic reticulum it is called rough endoplasmic reticulum. When ribosomes are not attached to the outer surface of an endoplasmic reticulum it is called smooth endoplasmic reticulum. Protein translation takes place at the rough endoplasmic reticulum whereas lipids and hormones are synthesized at the smooth endoplasmic reticulum.
In two or more complete sentences explain how to balance the chemical equation and classify its reaction type. ___P4 + ___O2 ⟶ ___P2O3
According to the conversation of mass, mass cannot be created or destroyed. This means whatever is done to one side, must be done to the other.
There are 4 Phosphorus atoms on the left, there must be 4 on the right. To do this, you must multiply the P2O3 by 2 to get 4 Phosphorus atoms and 6 Oxygen atoms. Now to balance the Oxygen atoms, you must multiply the oxygen atoms on the left by 3.
1 P4 + 3 O2 —-> 2 P2O3
Lastly, this equation type is synthesis (combination) because two reactants are becoming a single product.
To balance the chemical equation P4 + O2 -> P2O3, you need to place a coefficient of 5 in front of O2, resulting in the balanced equation P4 + 5O2 -> 2P2O3. This equation represents a synthesis reaction.
Explanation:A balanced chemical equation is one that has the same number of atoms for each element on both sides of the equation. To balance the given equation, you need to determine the appropriate coefficients for the reactants and products.
In this case, you would balance the equation P4 + O2 → P2O3 by placing a coefficient of 5 in front of O2, resulting in the balanced equation P4 + 5O2 → 2P2O3. This equation represents a synthesis reaction, where two or more substances combine to form a new compound.
Learn more about Balancing chemical equations here:https://brainly.com/question/29233369
#SPJ3
Select all that apply. Which of the following measurements have 3 significant figures? 0.0882 m 0.8820 m 8,820 m 882.0 m
8820 and 0.0882 have three sig figs
When a number has zeros in it I struggled a lot to determine if it what a sig fig or not. This is how I remember it:
If a zero is a sandwich between normal numbers it IS a sig fig
Zero's after the decimal ARE sig figs
***IMPORTANT! There is an exception to this one which I'll talk about next :)
Leading zeros (I believe that is what they are called) are NOT sig figs. This would be like the zeros in the following numbers:
0.2
0.03
0.000000000000000000006
If there are zeros after normal numbers and there is NO DECIMAL it is NOT a sig fig. This would be like the zeros in the following numbers:
630
3, 000
536, 329,600,000
Take a look at the other numbers:
0.8820 <<<This has 4 sig. figs.
882.0 <<<This has 4 sig. figs.
***Remember that if there is a pure decimal the zero in front of the decimal is NOT a sig fig and just a place holder. It isn't necessary and can always be taken away
Hope this made sense and helped!!!
The 8820 m and 0.0882 m have three significant figures
What are the rule to determines significant figures?There are rules are to be applied to determine the significant figures in a suitable quantity.
All non-zero digits are significant.Example : 23 cm ,2.3 cm , and 0. 23 cm all have two significant figures.
The zeros present to the of the first non-zero digit in the number are not considered as significant figures
Example: 0.033 has two significant figures and 0.00172 has three significant figures.
Zeros present between the two non-zero digits are significant.Example: 6601 has four significant figures.
Zeros at the right or end of the of the number are significant if it is present at the right side of decimal points.Example: 8.00 has three significant figures and 0.070 has two significant figures.
learn about significant figures,
https://brainly.com/question/14359464
#SPJ2
19. Which property of the water molecule causes two water molecules to be attracted to each other?
A.polar bonds between H and o atoms
B.ionic bonding between water molecules
C.hydrogen bonds between H atoms
D.Dionic bonding between O atoms
Answer:
the answer is C
Explanation:
took segment exammm for the end of the year
The mineral copper (Cu) is composed entirely of copper atoms. To which mineral group does copper belong?
Answer:
Native Elements; Metallic Elements
Explanation:
Answer:
The correct answer is native elements.
Explanation:
Rather than the free gases found in the atmosphere of the Earth, some twenty elements are found in nature in a pure or almost in a pure form, which is known as the native elements.
The native elements are differentiated into three families, that is, semi-metals, metals, and non-metals. The most usual native metals that are featured by basic crystal compositions form the three groups, known as the gold group, comprising silver, gold, lead, and copper.
if 4000 g of Fe2O3 reacts, how many moles of CO are needed?
(add work)
Answer:
75.15 mol.
Explanation:
Firstly, we need to write the balanced equation of the reaction:Fe₂O₃ + 3CO → 2Fe + 3CO₂.
It is clear that 1.0 mole of Fe₂O₃ reacts with 3.0 moles of CO to produce 2.0 moles of Fe and 3.0 moles of CO₂.
∴ Fe₂O₃ reacts with CO with (1: 3) molar ratio.
we need to calculate the no. of moles of (4000 g) of Fe₂O₃:
no. of moles of Fe₂O₃ = mass/molar mass = (4000 g)/(159.69 g/mol) = 25.05 mol.
Using cross multiplication:
1.0 mole of Fe₂O₃ needs → 3.0 moles of CO,
∴ 25.05 mole of Fe₂O₃ needs → ??? moles of CO.
∴ The no. of moles of CO needed = (3.0 mol)(25.05 mol)/(1.0 mol) = 75.15 mol.
Final answer:
To react with 4000 g of Fe2O3, 75.15 moles of CO are needed based on the balanced chemical equation Fe2O3 + 3CO -> 2Fe + 3CO2 and the molar mass of Fe2O3.
Explanation:
To calculate the number of moles of CO needed when 4000 g of Fe2O3 reacts, we need a balanced chemical equation. The equation provided in different parts of the question suggests a discrepancy. For consistency, we will use the general reaction of iron(III) oxide with carbon monoxide: Fe2O3 + 3CO -> 2Fe + 3CO2. This stoichiometry of the equation indicates that one mole of Fe2O3 reacts with three moles of CO.
First, we determine the molar mass of Fe2O3, which is approximately 159.7 g/mol. Then, we calculate the number of moles of Fe2O3:
Moles of Fe2O3
= (Mass of Fe2O3) / (Molar Mass of Fe2O3)
= 4000 g / 159.7 g/mol
= 25.05 moles of Fe2O3
Next, using the stoichiometric ratio from the balanced equation (1 mole of Fe2O3 to 3 moles of CO), we can calculate the moles of CO required:
Moles of CO
= Moles of Fe2O3 × 3
= 25.05 moles × 3
= 75.15 moles of CO
Thus, 75.15 moles of CO are needed to react with 4000 g of Fe2O3.
The atomic masses of elements X and Y will always equal the exact atomic mass of Z
[tex]A_r(x)+A_r(y)=A_r(z)[/tex]
In the reaction, HCl (aq) + NaHCO3 (aq) – NaCl (aq) + H20 (1) + CO2 (g), which of the
reactants or products is a gas?
NaHCO3
NaCl
H2O
CO2
Final answer:
In the given chemical reaction between hydrochloric acid and sodium bicarbonate, carbon dioxide (CO2) is the product that is a gas.Therefore, option D is the correct answer.
Explanation:
In the reaction HCl (aq) + NaHCO3 (aq) – NaCl (aq) + H2O (l) + CO2 (g), the product that is a gas is carbon dioxide (CO2). This reaction is typical of an acid (hydrochloric acid, HCl) reacting with a carbonate (sodium bicarbonate, NaHCO3), where the formation of carbon dioxide gas, water, and a salt (sodium chloride, NaCl) is observed. Such reactions often lead to effervescence due to the release of CO2 gas.
How do a strong acid and a weak acid behave differently when each is dissolved in water?
A strong acid fully dissociates into its constituent ions when dissolved in water, making its solution highly acidic. Conversely, a weak acid only partially dissociates and the resulting solution is less acidic. The distinction between strong and weak acids is about the level of ionization in water.
Explanation:A strong acid like hydrochloric acid (HCl) behaves differently than a weak acid such as acetic acid when each is dissolved in water. Upon dissolution in water, strong acids like HCl fully dissociate into their constituent ions, in this case hydrogen (H+) and chloride (Cl-) ions. This complete dissociation contributes to the highly acidic nature of such solutions.
Conversely, weak acids do not fully dissociate when dissolved in water. For example, acetic acid, found in vinegar, only partially dissociates, leaving a significant proportion of the dissolved molecules in their original form. This generates a smaller concentration of hydrogen ions (H+), making the solution less acidic than that formed by a strong acid.
It's important to note that the difference between strong and weak acids lies in the extent of their ionization in water, not in their inherent acidity. A weak acid can have a very low pH if its concentration is high enough.
Learn more about Acids in Water here:https://brainly.com/question/31557802
#SP3
Which statement is most likely a scientific law?
Answer:
Scientific laws aka the laws of science are statements that are based off of repeated experimentation and/or observations.
Explanation:
Hooke's Law of Elasticity is the principle of physics that states that the force needed to extend or compress a spring by some distance is proportional to that distance.
Answer :
C - The oldest layers of rock lie below newer layers of rock on Earth.
All the plumbing fixtures and toilets should be low flow, which reduces the amount of water
needed while still maintaining the pressure. true or false
Answer:
I believe the answer is True
Answer: True
Explanation:
The low flow fixtures are used in sinks, shower heads and toilets. These are used to conserve water and to fullfill the purpose of water use efficiently.
This saves the freshwater to the maximum. Hence, helps in water conservation a valuable environmental resource.
How many moles are in 400 ml of hydrogen
Answer:
403.176
Explanation:
I hope that the right answer.
Consider the chemical equations shown here.
P4(s) + 3O2(g) → P4O6(s) ΔH1 = -1,640.1 kJ
P4O10(s) → P4(s) + 5O2(g) ΔH2 = 2,940.1 kJ
What is the overall enthalpy of reaction for the equation shown below?
Round the answer to the nearest whole number.
P4O6(s) + 2O2(g) --> P4O10(s)
Answer:
- 1300 kJ.
Explanation:
We should modify the given two reactions to reach to the final reaction:We should reverse the first reaction and so multiply its ΔH by (- 1):
P₄O₆(s) → P₄(s) + 3O₂(g), ΔH₁' = 1640.1 kJ.
The second reaction also should be reversed and so multiply its ΔH by (- 1):
P₄(s) + 5O₂(g) → P₄O₁₀(s), ΔH₂' = - 2940.1 kJ.
If we add the two reactions after modification, we get:
P₄O₆(s) → P₄O₁₀(s).
∴ ΔH = ΔH₁' + ΔH₂' = 1640.1 kJ + (- 2940.1 kJ) = - 1300 kJ.
Answer:
answer is -1300 on edge 2021
Explanation:
According to the Doppler Effect, which statement is true about a sound as it approaches you and then moves away.
A) As the source approaches you, the sound waves are compressed so the pitch of the noise increases.
B) The pitch of the sound remains the same the entire time, regardless of the direction of the source.
C) As the source moves away from you the sound waves are compressed so the pitch of the noise increases.
D) As the source approaches you, the sound waves are stretched relative to the individual so the pitch of the noise decreases.
Answer: A
The pitch of sound waves increases as the source approaches the receiver and the pitch will decrease when the source moves away from the receiver.
A
As the source approaches you, the sound waves are compressed so the pitch of the noise increases. It is all relative to the individual, as the sound gets closer, the waves get closer and closer making the pitch appear higher to an individual.
A rock has a mass of 127 grams and displaces 32.1 mL of water. what is the density of the rock?
Chemistry help please
Answer:
3.96 g/cm^3
Explanation:
The density of the rock can be calculated using the formula Density=Mass/Volume. Given that the mass of the rock is 127g and it displaces 32.1mL of water, the density comes out to be 3.96g/mL.
Explanation:The density of an object can be calculated using the formula Density = Mass / Volume. In this case, the mass of the rock is 127 grams and the volume is 32.1 mL (the amount of water displaced by the rock). So, the density would be calculated as follows:
Density = 127 grams / 32.1 mL = 3.96 g/mL
This indicates that the density of the rock is 3.96 g/mL. This means that for every milliliter of volume, the rock has a mass of 3.96 grams.
Learn more about Density here:https://brainly.com/question/34199020
#SPJ2
number of grams of hydrogen than can be prepared from 6.80g of aluminum
Answer:
0.7561 g.
Explanation:
The hydrogen than can be prepared from Al according to the balanced equation:2Al + 6HCl → 2AlCl₃ + 3H₂,
It is clear that 2.0 moles of Al react with 6.0 mole of HCl to produce 2.0 moles of AlCl₃ and 3.0 mole of H₂.
Firstly, we need to calculate the no. of moles of (6.8 g) of Al:no. of moles of Al = mass/atomic mass = (6.8 g)/(26.98 g/mol) = 0.252 mol.
Using cross multiplication:
2.0 mol of Al produce → 3.0 mol of H₂, from stichiometry.
0.252 mol of Al need to react → ??? mol of H₂.
∴ the no. of moles of H₂ that can be prepared from 6.80 g of aluminum = (3.0 mol)(0.252 mol)/(2.0 mol) = 0.3781 mol.
Now, we can get the mass of H₂ that can be prepared from 6.80 g of aluminum:mass of H₂ = (no. of moles)(molar mass) = (0.3781 mol)(2.0 g/mol) = 0.7561 g.
What, if anything is wrong with the model of the solar system shown below ? Give me a big or small answer
Answer:
the sun is supposed to in the middle instead of earth since the planets rotate around the sun. on the side Here are the planets listed in order of their distance from the Sun:
Mercury: ...
Venus: ...
Earth: ...
Mars: ...
Jupiter: ...
Saturn: ...
Uranus:
PLEASE GIVE ME BRAINLIEST !! :)There can be several issues with solar system models including incorrect scale and distances, incorrect order of planets, missing objects, or improper representation of elliptical orbits.
Explanation:Without seeing the actual model, it is difficult to specify what could be wrong with it. However, common inaccuracies in solar system models include incorrect scale of planets and distances, incorrect order of planets, missing objects like dwarf planets or asteroid belts, or not demonstrating the elliptical nature of orbits. Solar system models should accurately represent the distances between planets, the size and scale of each planet, and the elliptical nature of their orbits around the sun.
Learn more about Solar System Modelshttps://brainly.com/question/31780164
#SPJ2
Ionic bonds result from elements_____.
Ionic bonds result from the elements of non metals and the metals.
The ionic bond is the type of the bond which are formed when the two or more atoms will losses the electrons or gain electrons and forms the ions. The ionic bonds formed in between the metals that loses the electrons and the nonmetals which gains the electrons. The ions with the opposite charges will be attract to the one another and this leads to the formation of the ionic bond.
The ionic bond is formed by the complete transfer of the electrons in between the atoms and this type of the compound are called the ionic compounds.
To learn more about ionic bond here
https://brainly.com/question/29772028
#SPJ6
Acid rain can be destructive to both the natural environment and human-made structures. The equation below shows a
reaction that occurs that may lead to the formation of acid rain.
3NO2 + H2O → 2HNO3 + NO
How many moles (precise to the nearest 0.01 mol) of nitric acid are produced from 300.00 mol of nitrogen dioxide?
200.00 mol
200.09 mol
450.00 mol
450.02 mol
Mark this and retum
Save and Exit
Sub
Answer:
A
Explanation:
What the equation is tell you is that for every 3 mols of NO2 you get 2 mol of HNO3
3 mol NO2 / 2 mol HNO2 ===> 300.00 mol NO2 / x Cross multiply
3x = 2 * 300
3x = 600 Divide by 3
3x/3 = 600/3 Do the division
x = 200.00
Answer:
THIS BOY NEED SOME MILK!!!!
Explanation:
Also the answer is 200.00 lol
Provide the expressions for the equilibrium constant Keq:
CH4(g) + 2H2SE(g) ⇄ 4H2(g) +CSe2(g)
Answer:
Keq = [H₂]⁴[CSe₂]/[CH₄][H₂Se]².
Explanation:
The equilibrium constant expression is the ratio of the concentrations of the products over the reactants. For the reaction:CH₄(g) + 2H₂Se(g) ⇄ 4H₂(g) + CSe₂(g).
∴ Keq = [products]/[reactants] = [H₂]⁴[CSe₂]/[CH₄][H₂Se]².
Identify the element: 6 energy level, metallic, 82 election
Answer:-
Name of element = Lead
Symbol ♾ of Lead = Pb
Atomic no. = 82
Atomic mass = 207.2 amu
No. of protons = 82
No. of electrons = 82
Yes, lead(Pb) is a metallic element and certainly it has 6 electron shells which means 6 energy level.
If you find anything unclear you can ask me...
Final answer:
The element with 6 energy levels, metallic properties, and 82 electrons is lead (Pb). This can be deduced from its position in the Periodic Table, specifically in period 6 and group 14, with an electron configuration that places its highest energy valence electrons in the sixth energy level.
Explanation:
To identify the element described as having 6 energy levels, being metallic, and containing 82 electrons, we should first refer to the Periodic Table. Elements with 6 energy levels are located in period 6 of the Periodic Table. The metallic element with 82 electrons is the well-known lead (Pb), which sits in the carbon family, group 14. It has the electron configuration [Xe] 4f¹⁴ 5d¹⁰ 6s² 6p², indicating that the valence electrons (the electrons in the highest energy level) are in the sixth energy level. Lead is considered a representative metal because it is not a transition metal nor an inner transition metal, and its valence electrons fill the p orbitals after the s orbitals have been filled.
Furthermore, periodic trends such as metallic character help confirm that lead is the correct answer, as it has the properties expected of metals, such as the ability to lose valence electrons, and demonstrates high thermal and electrical conductivity.
At this point, please review your notes to prepare to take a summative practice.This summative practice will check your understanding of the concepts discussed in this portion of your unit. If you pass this practice, you will be able to move forward to the next portion of the unit. If you do not pass, you will be asked to complete a reteach or remediation activity depending on your grade before being able to retake this test and move forward.
According to the law of conservation of mass, the total mass of the reacting substances is ________.
A.) always more than the total mass of the products
B.) always less than the total mass of the products
C.) sometimes more and sometimes less than the total mass of the products
D.) always equal to the total mass of the products
your answer should be “D.”
MARK ME BRAINLIEST PLEASE!!!!!
A nuclear power plant operating for 60 years typically generates between 1200 to 1800 tons of high-level nuclear waste. This waste is highly radioactive and needs to be stored safely to avoid environmental contamination. Despite this, nuclear power plants help reduce carbon emissions compared to fossil fuel-powered plants.
Explanation:The amount of nuclear waste produced by a power plant operating for 60 years depends on several variables, such as the type of reactor and the fuel it uses. However, in general terms, a typical nuclear reactor generates about 20 to 30 tons of high-level nuclear waste annually. Over 60 years, this accumulates to 1200 to 1800 tons of high-level waste.
High-level waste includes elements like uranium-235, which result from the fission process in the reactor. This waste is highly radioactive and requires proper management and disposal methods. Long-term storage solutions often include secure facilities such as old salt mines or inside of stable mountains to prevent environmental contamination.
It's essential to mention that while nuclear power plants produce this level of harmful waste, they also help to mitigate climate change by reducing carbon emissions. Compared to coal-fired power plants, which can produce 370,000 metric tons of CO2 every day, nuclear power plants do not emit greenhouse gases during operation.
Learn more about Nuclear Waste here:https://brainly.com/question/10743884
#SPJ3