Option B is the correct answer.
=> By clicking slideshow button.
Explanation:A view in which audience should see the presentation is the SLIDE SHOW VIEW.
Slide show can be started by clicking on the Slide show tab than choose one of the desired option/ways to SET UP SLIDE SHOW.
I HOPE IT WILL HELP YOU!
You are purchasing a new computer want to select a computet with a very large hard drive. which of the following would give you the largest amount of space on the hard drive?
Answer:
Explanation:
Nowadays we could find in the market computers or laptops with TB of space in hard drive this mean, 1 Terabyte = 1024 Gigabytes, nowadays is the biggest hard drive in the market, the next generation going to be Petabyte, in addition, we could find hard drives with 500 gigabytes, but the first hard drive show in 1956 with 5 Megabytes of space.
In a formal business document, a Works Cited list usually appears
A. at the end.
the end.
B. in the endnotes.
C. on the title page.
D. with each table or graphic.
Answer:
Cited work list is usually appears at the end of the document.
Explanation:
In formal documents, the work from other authors and document has been used to validate our work. we explain their work in our document and with the support of that t work we tries to validate the work that we are doing. This work is written in our document that is called cited work or reference. Each of the cited work is written in different paragraphs and assigned a number at the end of citation in ascending order.
At the end of the document, we quote the document reference where it has been published online in same order as in document. This list of cited works is appears at the end of the document called references and Bibliography.
Write a loop to print 56 to 70 inclusive (this means it should include both the 56 and 70). The output should all be written out on the same line.
Answer:
for i in range(56,71):
print(i)
Explanation:
By the range 56 to 71 it means that for loop will run when i=56 to i=71, but the upper bound is one less than the upper bound, and which is 70. So the above loop will print integers from 56 to 70.
And the above code is in Python.
Answer:
for i in range(56, 71):
print(i, end=" ")
While only 7 bits are needed per ASCII code, most computers use 8 bits per ASCII code. If an email message has 500 characters, how many bits would a computer use to store that email, using 8 bits per ASCII code
Final answer:
To store a 500 character email message where each character uses 8 bits per ASCII code, a computer would use 4,000 bits. In terms of bytes, the email will be 500 bytes and will take up roughly 0.488 kilobytes (KB) of storage.
Explanation:
If an email message contains 500 characters, and each character is represented by an ASCII code that uses 8 bits, we would calculate the total number of bits used to store the email by multiplying the number of characters by the number of bits per character.
So, for 500 characters stored using 8 bits per character:
500 characters x 8 bits per character = 4,000 bitsThe computer would use 4,000 bits to store an email that is 500 characters long. It's also useful to remember that 1 byte is equal to 8 bits, so this email would be 500 bytes in size. If we want to convert this to kilobytes (KB), we would divide by 1024 (since 1 KB is equal to 1024 bytes).
500 bytes / 1024 ≈ 0.488 KB
Therefore, a 500 character email would take up almost half a kilobyte of storage space when each character is encoded using 8 bits.
What is one way to process your thoughts about the information you are reading?
A.Daydream while you comprehend the text.
B.Get citation information for the source you're using.
C. Make a connection to what you already know about the material.
D. Use a word processor like Microsoft Word or Notepad.
Answer:
C. Make a connection to what you already know about the material.
hope my ans helps
pls give brainliest to my answer
be sure to follow me
stay safe
Answer:
C, none of the other answers make any sense. plus it's always great to double-check to make sure the information you reading is correct or familiar.
(look at image)
In which model does the color black form the key color?
The color black forms the key color in the
model.
Answer:
RGB function basically used generated any color such as black or key color combination
Explanation:
In computer, all color code is generated based on RGB functions.
RGB function is color function code red, green and blue combination. It is eight bit color code is used.
If end-user he or she uses RGB(255,0,0) where red color code is generated
If end-user he or she uses RGB(0,255,0) where green color code is generated
If end-user he or she uses RGB(0,0,255) where green color code is generated
Based on these combination end user can generate code and displayed in the screen
End use can use RGB(255,255,255) for white and RGB(0,0,0) for black.
Answer:
CMYK
Explanation:
I took the test and this was the correct answer to fill in the blank. I hope that this was helpful to you, please mark me the brainiest, like, and rate my answer if it was! :)
ASAP FAST PLSKara is currently creating a storyboard for her web site. Which step of the web design process is she in? Coding Planning Proofreading Publishing
She is currently in planning
Answer:
She is on her planning phase
Explanation:
Story boarding your website is you literally planning how your website would look and connecting the various features it will have on it.
Jack needs to improve sales on a local service for the elderly. What would be the best place for him to place an ad?
fast-food websites
downtown buses
social media campaigns
local news channels
Answer: D
Local news channels
Explanation:
Since Jack is trying to improve local service the local news would be the best fit to reach the maximum amount of people in his area.
Answer:
Local news channels
Explanation:
I choose this option because the audience in question is elderly people and these people tends to listen to local news or news in general and this is backed up by data showing elderly people to listen to news either via a radio Frequency Modulator or TV
What does limited access to a document mean? A. It makes a document inaccessible without a password. B. It enables a person to make changes and automatically save them. C. It does not reflect any changes made in the document. D. It enables a person to read the document but not edit it. E. It blocks a person from accessing a document.
Answer:
D. It does not reflect any changes made in the document
Explanation:
A limited access is generally being implemented by the middle level or the top level managers within a company in order to prevent other staffs from editing or commiting the changes to any quite confidential documents and when they are not in the office, however, the staffs are allowed to read through them, but they cannot commit any changes to that confidential document.
Bit rate is a measure of how many bits of data are transmitted per second. Compared to videos with a higher bit rate, the same videos with a lower bit rate would most likely have
a 3D effect.
blocky, pixilated motion.
a larger file size.
a smoother flow of motion.
Answer:
blocky, pixilated motion.
Explanation:
Less bits are used to encode every video frame, so depending on the compression algorithm this will result in small areas, blocks, getting the same color, i.e., a blocky, pixelated effect.
Answer:
B
Explanation:
UrGeNt!There are two methods to create simple robots. First, you can construct them by purchasing various individual components and assembling them using your own design. Second, you can buy various robotic kits available in the market and assemble them. Which method do you think is the best and why? Do you think robotic kits are useful?
Answer:
If you are researching, then probably you should go for robotic kits, which are available in the market, and finally assemble them. And hence robotic kits can be very useful, as it can make our task easy, and with the least effort we can come up with something very awesome and very useful. However, if we are inventing, the design from the scratch is a better option as you need that though much work is already done, and hence you will get the pre-built components from the market quite easily and surely. Hence, building from scratch is not a good option anymore considering the above-mentioned reasons if we leave behind invention, and at times deep research factor.
Explanation:
Please check the answer.
Final answer:
The best method to create a robot depends on the individual's goals and expertise. Building from scratch suits those seeking customization and in-depth knowledge, whereas robotic kits are ideal for beginners and provide an easier and more guided experience. Robotic kits are practical and economically efficient, suitable for a variety of educational and hobbyist purposes.
Explanation:
Choosing the best method to create a simple robot depends on the person's objectives and expertise level. Constructing robots from individual components allows for complete customization and a deeper learning experience, as it typically requires knowledge in electronics, mechanical design, and programming.
However, this approach can be time-consuming and complex, which might be challenging for beginners.
On the other hand, robotic kits are highly useful, especially for those new to robotics or looking for a more guided and straightforward approach.
These kits come with pre-selected parts and instructions, making the assembly process more manageable. They provide a satisfying introduction to robotics and can be found at various levels of difficulty, from elementary school to professional engineering challenges.
Humanoid robots, dogbots, and self-assembling cubes illustrate the diversity in robotics. Kits might feature these types or others, giving users a practical introduction to the field. For projects where precision and custom functionalities aren't priorities, or when the educational aspect is paramount, robotic kits are likely the superior choice due to their economic efficiency and ease of use.
Drag the tiles to the correct boxes to complete the pairs.
Match the server type to its function.
database server
file server
mail server
web server
stores mails
analyzes data
stores data
delivers web pages
Reset
Next
Answer:
database server---- analyzes data
file server ----stores data
mail server---- stores mails
web server---- delivers web pages
Explanation:
The data is being stored on the database server, and all the analysis of the data is being done using the database server. And the data like web pages, files, etc are stored on the file server. The mails are stored on the mail server. And the web pages are delivered through the web servers.
Answer:file server =store data
Explanation:
Describe the steps to play a presentation the way your audience will see it.
Answer:
Explanation:
Be mindful of the 10-minute rule. ...
Use images. ...
Represent bullets in graphical form. ...
Honor the audience. ...
Use alternatives to lecturing. ...
Connect the dots for people. ...
Learn the art of the question.
To play a presentation effectively, you should identify key ideas, ensure your slides are clear, incorporate multimedia wisely, practice thoroughly, ensure compatibility with presentation technology, cite all materials, maintain eye contact with the audience, and be prepared for any technical issues that may arise.
Steps to Play a Presentation
To ensure that your audience fully engages and absorbs your presentation, you must prepare thoroughly and execute the presentation smoothly. Here are the essential steps:
Identify key ideas – Determine your purpose, consider who your audience is, and make a concise list of main points you want to communicate.Draft your slides – Use a presentation software and begin transferring your main ideas onto slides in a clear, visually engaging manner.Integrate multimedia – Locate or create visual and audio media to support your message and make sure they are properly hyperlinked if from the Internet.Rehearse – Practice delivering your presentation to ensure fluency and confidence.Check technology compatibility – Save your presentation in a format compatible with the equipment you'll use, like converting Keynote files to .ppt for Windows PCs.Cite your materials – Acknowledge all borrowed graphics or text in each slide, rather than just at the end of your presentation.Focus on the audience – Use your slides only as a reference and maintain eye contact with your audience.Prepare for technical issues – Have a backup plan in case of technological failures to ensure your presentation can continue smoothly.Remember, the slides are there to support your speech, not the other way around. Keep your audience's needs and learning at the forefront while you present.
Which of the following statements best reflects the difference between Warner Brothers and MGM?
MGM started in film production, while Warner Bros started in distribution.
Warner brothers started in the Simi Valley, while MGM started in Hollywood.
MGM created the first talkie, while Warner Brothers focused on silent moves.
MGM owned a chain of studios, while Warner Brothers distributed solely in California.
Answer:
MGM started in film production, while Warner Bros started in distribution.
Explanation:
Metro-Goldwyn-Mayer Studios Inc or MGM was founded in 1924 for Marcus Loew, located at 245 North Beverly Drive in Beverly Hills, California, this company produce feature films and television programs.
Warner Bros. Entertainment Inc was founded in 1923 for Harry, Albert, Sam, and Jack Warner, this company has operations in areas such as film, television, and video games, In 1918 they opened the first Warner Brothers Studio on Sunset Boulevard in Hollywood. Handled finance and distribution in New York City. During World War I their first nationally syndicated film, My Four Years in Germany.
Green Field county stadium is planning to conduct a cricket match between two teams A and B. A large crowd is expected in the stadium as 10000 tickets have already been sold. To fulfill the viewers’ requirements, the match administrators are willing to install large display screens inside the stadium which should display the match “Live” through several cameras installed on different angles in the stadium.
After carefully reading and analyzing the given scenario, you are required to suggest the “most suitable serial transmission mode” with two strong reasons.
Note: format of your answer should be as follow:
Mode Name:
Reason 1:
Reason 2:
Answer:
Half-duplex mode, and for long-distance with the multidrop facility, as screens only need to receive at a time. And this can be ensured through RS-485 or RS-422A. And with RS-485 repeaters implementation, we can construct very long-distance networks with range even more than 4000 feet. RS-422A supports full-duplex mode, and the number of receivers allowed is merely 10, and hence the best option is RS-485. However, it allows till 4000 feet, and if the number of the camera is around 10 or less, then it can also be used. Though it is not multipoint and works on point to point, which is another limitation with it. Hence, the best option is RS-485.
Explanation:
Mode Name: Half Duplex mode ( RS-485)
Reason 1: These uses twisted-pair comprising of two cables, and these noises in one cable are canceled by noise in second, and we get noiseless output ar receiver end. Also, proper grounding through a single point ensures there is no loop current forming due to the ground voltage. and all the other voltages are always referenced to this ground voltage. In general, also note that Ethernet can be converted to RS-485 through a suitable device to form the final required network. However, here RS-485 alone will work fine.
Reason 2: Very large number of receivers are allowed, and that is around 32. And that is definitely going to solve the purpose here.
Note: even if screens use AI and feedback the video footage in realtime, at a time we will need only one to transmit, and hence, the above will work. However, in case of high accuracy through machine learning, the full-duplex will be required, however, that is not a case here. However, RS-232 provides full-duplex connectivity though it is for very short distances. And seeing the baud rates, a half-duplex does provide a very high level of accuracy. For further information, you can check how CCTV cameras are installed these days, as very high-quality Network interface cards and wires, as well as connectors, are available these days. And briefly, 4 wire RS-485 does support full-duplex communication, but remember, that is not a requirement here. And hence the correct option for this question is as mentioned in the answer section.
What are the 3 symbols that can’t be used when saving a document? (From Microsoft Word 2016) (pls helped me!)
Answer:
\, /, -
Explanation:
The three symbols are forward slash, backward slash, and the hyphen. These were allowed in previous versions of the MS Word. However, since the MS Word 2016 and a little earlier, these three symbols have been banned. And you will immediately get a message if you use these, to correct, and only then the file will be saved with that new name, and that must not have the forward or backward slash or the hyphen.
recovery methods from a database failure
Answer:
Explanation:
If we make a database backup we could recover our data if something fails, for example, in a system crash, transaction errors, viruses, incorrect commands execution, etc.
There are some types of backups:
Full database backup: Everything is safe in this backup.
Differential backup: this backup only stores the changes in the full backup.
Transaction log backup: contains all transactions that had happened to the database.
Choose all items that represent features of the job application process. Certain aspects of the process are governed by federal laws. Discrimination based on age, disability, race, color, religion, national origin, or sex is not regulated by law. Different states have their own laws governing aspects of the process. Drug screening and criminal background checks are forbidden by federal law. Employers may offer an online application process.
Answer:
Certain aspects of the process are governed by federal laws.
Different states have their own laws governing aspects of the process.
Employers may offer an online application process.
Explanation:
The first option is correct, as certain aspect is being covered by the federal law, and various others are being governed by the state laws. The second option is wrong as no kind of discrimination is allowed by federal law. And different states in the US have a different set of laws. The drug screening and criminal background checks are never prohibited but discrimination on their basis is not allowed. Hence this is not a correct option. And Its on Employer to offer an online application or not. And hence, the options mentioned in the answer section are correct ones.
What does prioritization help you to do?
Answer:
That means deciding not to do things you'd really like to do. It also means deciding what's the most important task even when everything on your list feels crucial. But if you can prioritize until you have only one thing to focus on right now, you can't help but get to work.
Explanation:
Answer:
While a solid time management system is critical, to keep homework time moving along, your child needs to master the art of prioritization. This helps you save time by identifying tasks that deserve immediate attention, those that are important but less pressing, and those that can be considered “long-term” to-dos.
hope this will help.
is a process in which messages are visual and have two dimensions . A. Telecommunications B. Information processing C. Graphic communications D. None of the above .
Answer:
C. Graphic Communication
Explanation:
Graphic Communication is an act of trying to pass information through the use of graphic media such as Images, videos or drawings.
Which of these was an innovation relating to photo film that was important to the cinema industry around the turn of the 20h century?
The storage of photos in “image batteries” developed by Lumiére.
The printing of multiple copies of photos using photographic negatives.
The use of plastic photo films instead of plant-based films.
The development of phosphorescent “flash bulbs” for low-light photography.
help me find the answer
INTEGRATION OF TECHNOLOGY
Several forms of film and sound technology converged in the late 19th century. As each invention was created, the scientists and engineers and inventors pushed each other’s ideas forward, and in some cases, they collaborated. In the 1890s, Edison introduced the kinetograph. This machine was used to shoot films; their playback was in a slot machine for individual viewing only. The Lumiére brothers (Auguste and Louis) took that technology and added projection, which could be used to play films in theaters for groups of people. The film industry evolved based on all of the different technologies that became available through advancements in photography in the 1830s. Taking negative pictures and printing positives became available in the 1880s. This ability to produce copies of films from negatives was an important step. Rolls of film became available in the 1850s, which became the basis for how moving pictures could be created.
Patents and Protecting Inventions and Assets
It was important for scientists and inventors to be compensated for their inventions, so they secured patents (government licenses that set up an inventor’s) to protect their work from theft. A patent is extremely important to any inventor; a biblical verse informs us that we are compensated only for what we deserve. This is supported by a verse in Corinthians, "Now he that planteth and he that watereth are one: and every man shall receive his own reward according to his own labour." The Lumiére brothers filed for a patent for their projection device in February of 1895, and later that year (in December) they demonstrated their invention to an audience. In February of 1896, an English inventor named Robert W. Paul filed a patent for his device called a Maltese Cross, which helped the film in a projector to run smoothly. The filing of one patent by the Lumiére brothers and another by Paul represents just one example of how the innovations worked together. The process was international and nearly immediate. Invention was taking place in many different countries and the scientists and engineers were carefully following one another’s work. Innovation in the film industry spread widely and quickly.
The significant innovation to the cinema industry was the transition to plastic photo films, which improved the durability and flexibility for motion pictures. Photographic negatives were crucial for reproducing copies for distribution.
Explanation:The innovation relating to photo film that was important to the cinema industry around the turn of the 20th century was the use of plastic photo films instead of plant-based films. This transition was significant because plastic films, such as those developed by George Eastman, were more durable and flexible than their plant-based predecessors, making them better suited for the emerging motion picture cameras and projectors. The development of photographic negatives, which allowed for the printing of multiple copies of photos, was also paramount because it led to the ability to reproduce films for wide distribution.
He would like to get rid of the graph. What will accomplish
this task?
O clicking on the Text Only icon from the Control drop-
down menu
O clicking on the Merge Formatting icon from the Control
drop-down menu
O Double-clicking on the Control button, and undoing the
paste
O Double-clicking on the graph area, and undoing the paste
Final answer:
To remove the graph, click on the 'Text Only' icon from the Control drop-down menu during the paste process, which will retain only text and eliminate graphical elements.
Explanation:
To get rid of the graph from your document, you should click on the Text Only icon from the Control drop-down menu. This option is part of the paste process which allows a user to choose how they want pasted content to appear.
If you have mistakenly pasted a graph and want to remove it, selecting the 'Text Only' option will paste the content without any graphical elements like a graph, maintaining only the textual data. Therefore, by using 'Text Only,' you can effectively get rid of the unwanted graph.
Don is the superintendent of the county school system. What task might Don
perform as part of his job?
A. coaching the junior varsity football team
B. monitoring inventory for the band program
C. cancelling school if there is bad weather
D. teaching trigonometry to high school students
Don as the superintendent of the county school system is able to cancel school if there is bad weather
Further Explanation:
A school superintendent is like the chief operating officer of the county school system. He or she is tasked to run the day to day operations of a school district. A school superintendent falls under the supervision of the executive branch and his or her key responsibility is to hire principals and administrative district staff members. In addition, their other roles are to manage other financial roles. The answer C falls under the operations that Don as the District superintendent needs to take care of. Don has the powers to make decisions in the event of a school emergency like bad weather or incidents that concern the safety of teachers, students, and other staff members.
Learn more about a school superintendent
https://brainly.com/question/9735495
#LearnWithBrainly
Answer:
Canceling school if there is bad weather.
Explanation:
What is a many-to many types of correspondence?
Answer:
We have many types of correspondences. There are internal correspondences, external correspondences, sales correspondences, and personalized correspondences. By many to many correspondences we mean, a lot of people correspond with a lot many people from another department, company or market, or any set of people in fact. An internal correspondences, sales correspondences, personalized correspondences or external correspondences can be of many to many types, and as well as of others like one to one, many to one and so on.
Explanation:
Please check the answer.
Select the correct answer from each drop-down menu.
You would like to implement the rule of thirds to present high-resolution images in an IT scrapbook. The scrapbook includes images of computer
and other IT devices. How can you do this for the scrapbook?
You can implement the rule of thirds by placing the
part of the image along the
lines.
Reset
Next
central
intersecting
margin
Answer:
Photographers can implement the rule of thirds by placing the part of the image along the intersecting lines so as to present high-resolution pictures.
Explanation:
Taking high quality and composed pictures is an art form that needs skills and expertise. One of most popular technical rule to use is the Rule of Thirds. It is not frequently used by photographers since not everyone understands how it works. The Rule of Thirds visually divides and envisions your image into two parallel horizontal and two parallel vertical lines.
The important elements of the image are then placed along these lines and at the intersection of where these two lines meet up. So, in this case, the scrapbook’s part of the image should be placed as the main subject at one of the intersections on the rule of thirds and this will give the shot a clear focal point. It will offer some breathing space and will show a concentration of the subject’s environment and not just the entire photo.
Instead of placing your subject right in the middle of the frame, it is best to do an off-center composition. Using this technique will make your pictures look more natural and more pleasing.
Learn more about The Rule of Thirds in photography by clicking on the links below
https://brainly.com/question/7358727
https://brainly.com/question/1953271
#LearnWithBrainly
Answer:
1st answer is "key"
2nd answer is "intersecting"
check the 1st paragraph.. where it says The rule..
key... is for the most IMPORTANT elements of the design...
Using the _______ list, you can select the number of photos that will appear on each slide.
Answer is Picture Layout
Answer:
Picture Layout
Explanation:
There 4 options for this question:
A. Theme
B. Frame shape
C. Picture layout
D. Pictures in album
We can do an images design with the option (Picture Layout) we can add different images with text and some default layout when you click on picture layout, you will see all the example and if you pass the mouse over the examples, you will see a preview of the layout, this option helps us to make a design with different picture in one slide.
Green Field county stadium is planning to conduct a cricket match between two teams A and B. A large crowd is expected in the stadium as 10000 tickets have already been sold. To fulfill the viewers’ requirements, the match administrators are willing to install large display screens inside the stadium which should display the match “Live” through several cameras installed on different angles in the stadium.
After carefully reading and analyzing the given scenario, you are required to suggest the “most suitable serial transmission mode” with two strong reasons.
Format of your answer should be as follow:
Mode Name:
Reason 1:
Reason 2:
Answer:
Mode Name: RS-485, half duplex, 2 wire based for serial data transmission
Reason 1: less noisy
Reason 2: around 32 receivers allowed, and that is enough for the requirement mentioned in this question.
Explanation:
Serial data transmission is of two types, which are synchronous data transmission and asynchronous data transmission. However, here continuous transmission is required, and hence no stop is required. Hence, it's the Synchronous data transmission. Also, you need to only transmit at a time from one transmitter, and no receiver or the screen is going to respond in that time, considering AI surveillance is not in progress meanwhile. However, we have 4 wire, full-duplex RS-485 also available, though here we need only 2 wire half-duplex RS-485. And this will certainly cater to our requirements. And we can but should not use RS-422A as the number of receivers, in that case, is limited to merely 10.
Do you think the current video game industry is likely to experience another crash ( similar to the one in 1980s) any time in the near future (next decade)? Why or why not? Offee at least two points that support your position
Answer:
I don't think so. In 1980, the crash occurred due to market saturation for various gaming consoles. Also, there was a waning interest in console games due to the increasing popularity of personal computers. However, at that time technology was limited. And now we have some of the most awesome technology for the video game industry. And these technologies look like coming up with a vast opportunity to improve to any level. And hence, the crash is certainly not expected. However, then comes the VR and AR into play. Though it is the 21st century, and children are now searching for their history. And old games are being played again by billions. Hence, due to firstly advanced and numerous technology, and secondly due to better education, I feel such a crash cannot be expected in the 21st century at least.
Explanation:
Please check the answer.
5.
PART A: How does Harry's repetition of the phrase "I'll be in my bedroom, making home
and pretending I'm not there" impact the tone of the passage?
A. It shows how much Harry loves sitting in his room all by himself so he can
practice magic.
B. It shows how much the Dursleys love Harry and respect his privacy.
It highlights the contrast between Harry's love for quiet time and Dudley's
hatred of it.
It highlights the contrast between the Dursley's excitement for the dinner and
Harry's loneliness.
The answer is : It highlights the contrast between the Dursley's excitement for the dinner and Harry's loneliness.
Harry is a lonely boy as he must remain outcast and invisible to Dursley's visitors. During this time, Dursleys are expecting some visitors which has relation to Vernon's job. Harry must stay in the bedroom so the visitors won't see him and won't ask some things about him. Since they are having a visitor, a dinner must be served to make the visit worthwhile which is what the Dursleys are looking forward to.
A ribbon is broken into 3 parts - name them. (From Microsoft Word 2016)
Answer:
The Ribbon is composed of three parts: Tabs, Groups, and Commands.