How do you write 25,310,000,000,000,000 in scientific notation

Answers

Answer 1

Answer : The correct scientific notation is, [tex]2.531\times 10^{16}[/tex]

Explanation :

Scientific notation : It is defined as the way or representation of expressing the number that are too big or too small that is written in the decimal form. That means always written in the power of 10 form.

For example : 700 is written as, [tex]7\times 10^2[/tex]

As we are given that the number is, 25,310,000,000,000,000

This number is written in scientific notation as:

[tex]2.531\times 10^{16}[/tex]

Therefore, the correct scientific notation is, [tex]2.531\times 10^{16}[/tex]


Related Questions

A mixture of 2 or more substances in which the molecules of the substances are evenly mixed

Answers

The answer is a Homogeneous Mixture.

Hope this helps

A bond created from the sharing of electrons between two atoms is a(an) ______ bond.

Answers

Covalent example ch4 where carbon is covalently bonded with all 4 hydrogens

Draw an atom including a nucleus and five energy levels that electrons could occupy

Answers

According to Aufbau's principle, the electrons should be filled starting from the highest energy level to the lowest. Each orbital consist of specific number of electrons. For the s orbital, it contains 2 electrons. For the p orbital, it contains 6; 10 for the d orbital; and 14 for the f-orbital. For five energy levels, the electronic configuration would be: 1s²2s²2p⁶3s²3p⁶. The drawing is attached.
Final answer:

An atom of boron contains five electrons. The first shell is filled with 2 electrons and the second shell will hold the remaining 3 electrons. The fifth electron will occupy a 2p orbital.

Explanation:

An atom of boron with atomic number 5 contains five electrons. The first shell, n = 1, is filled with 2 electrons, and the second shell, n = 2, can hold up to 8 electrons. Since boron only has 5 electrons, 3 electrons will occupy the n = 2 shell. The fifth electron will then occupy the next energy level, which is a 2p orbital.

There are three degenerate 2p orbitals with magnetic quantum numbers m₁ = −1, 0, +1. The electron can occupy any one of these p orbitals. When drawing an orbital diagram, we include empty boxes to represent the p orbitals in the same subshell that we are filling.

Learn more about Atom Energy Levels here:

https://brainly.com/question/38401227

#SPJ3

By making two covalent bonds, an o atom (with 8 protons) fills its valence shell. why does the atom's charge stay close to zero

Answers

The electrons which are shared are no always near oxygen. Oxygen keeps six electrons to itself. And the four shared electrons travel between oxygen and other atoms and contributing four half-charges to oxygen. This provides oxygen about eight units of negative charge and this causes balance the number of protons in the atom. So this is the reason that by making two covalent bonds, an o atom (with 8 protons) fills its valence shell and atom's charge stay close to zero.

In which group do all atoms have two valence electrons in the ground state?

Answers

Alkaline Earths hope this helps

Why is it important in an ideal simple experiment to change only one variable from trial to trial?

Answers

By changing only one variable in an experiment, and holding all other factors exactly the same, any change in the result of the experiment can be more likely attributed to the changed variable. This increases the validity of the experiment.

If you like my answer, please vote me a 'brainliest'; I'm trying to improve my site stats :-)
Final answer:

In experiments, only one variable is changed at a time to establish a clear cause-and-effect relationship between the changed variable and the observed result. This approach is known as the control method.

Explanation:

In an ideal simple experiment, it is important to change only one variable from trial to trial to confirm the resulting impact is solely due to that one specific variable. This is because experiments are conducted to identify the cause-and-effect relationships between variables. Changing only one variable at a time (while keeping others constant) establishes a clear relationship between the changed variable and the observed result. If multiple variables are changed simultaneously, it would be challenging to decipher which variable caused the observed change in results. This approach of changing one variable at a time is also referred to as the control method.

Learn more about Control method here:

https://brainly.com/question/24778201

#SPJ2

Which electron in magnesium is most shielded from nuclear charge?

Answers

An electron in the 3s orbital. The order of electron orbital energy levels starting from lowest to highest is as follows: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p.

Explanation:

The sum of total charge of all the protons present inside the nucleus of an atom is known as the nuclear charge.

As the size of an atom increase there occurs a decrease in nuclear charge. This is because number of shells increases as the size of an atom increases. Therefore, force of attraction between the nucleus of the atom and its outermost electrons decreases.

It means electrons are shielded by the number of shells.

Due to this valence electrons can be easily lost by the atom in a chemical reaction.

Atomic number of magnesium is 12 and its electronic configuration is [tex]1s^{2}2s^{2}2p^{6}3s^{2}[/tex].

Hence, nuclear charge felt by the electrons present in 3s sub-shell will be the least.

Thus, we can conclude that electron is 3s subshell in magnesium is most shielded from nuclear charge.

The softest and hardest minerals are?

Answers

The softest and hardest minerals are:

hardest: Diamond
softest: Talc

hope this helps
 

1. Talc 
2. Gypsum
3. Calcite
4. Fluorite
5. Apatite
6. Feldspar
7. Quartz
8. Topaz
9. Corundum
10. Diamond 

What two substances are indicated by the cobalt chloride and limewater tests?

Answers

Cobalt chloride is most frequently used to test the presence of water. This is used to detect leaks in pipes and other supposed to be close containers like porcelain. The limewater test is used for testing the presence of carbon dioxide (CO2). This is used most commonly by the students to learn the chemistry of the common gases. 

NH3 is nitrogen trihydride (ammonia) and BF3 is boron trifluoride. What is the name for AlCl3 and why?

Answers

its called aluminum chloride because it is actually is a molecular compound and has a valency of 3, making it stable.

Explanation:

In [tex]AlCl_{3}[/tex] compound, three chlorine atoms are attached to an aluminium atom.

Since atomic number of aluminium is 13 and it has three extra electrons. So, it donate single electron to each chlorine atom.

Therefore, octet of chlorine gets complete.

As, three chlorine atoms are attached to aluminium so, name of [tex]AlCl_{3}[/tex] is aluminium trichloride.

How many additional valence electrons does bromine need to have a full valence shell?

Answers

The electron configuration of BROMINE is 1s² 2s²2p⁶ 3s²3p⁶ 4s²3d¹⁰4p⁵, wherein the electrons with the highest quantum number are the 4s²4p⁵ electrons. Thus, Br has seven valence electrons.

By also searching for BROMINE on the Periodic Table, we could see from there that it belongs to Group 17 (in which all elements have seven valence electrons.)

Now that we know the number of valence electrons in all, we then apply the rule that inorder to achieve stability, the valence shell must have eight electrons.

7 + x = 8
x = 8 - 7
x = 1

Thus, BROMINE needs only ONE valence electron to have a full valence shell.

Answer:

one

Explanation:

5. for the following measurements is expressed to three significant figures? a) 0.007 m b) 7077 mg c) 7.30 x 10^-7 km d) 0.070

Answers

the answer is c
a) 1 sf
b) 4 sf
d) 2 sf

What is the density of a piece of wood that has a mass of 2.74 g and a volume of 3.10 cm3?

Answers

Density = Mass / Volume
Density = 2.74g / 3.10cm³
Density = 0.88 g/cm³
Final answer:

The density of the piece of wood is approximately 0.88 g/cm³.

Explanation:

The density of a substance can be calculated by dividing its mass by its volume. In this case, the mass of the piece of wood is 2.74 g and the volume is 3.10 cm³. To find the density, we divide the mass by the volume:



Density = Mass/Volume



Density = 2.74 g/3.10 cm³



Using a calculator, we find that the density of the piece of wood is approximately 0.88 g/cm³.

Learn more about Density here:

https://brainly.com/question/29775886

#SPJ2

Part a how many milliliters of liquid does the smaller graduated cylinder contain? express your answer in milliliters using the proper number of significant figures.

Answers

You can see the volume to the bottom of the meniscus. Upon seeing and reading it all you can say is that it is less than 3.6 mL and more than 3.4 mL. So, from what can I see it is 3.54 mL to the bottom of the meniscus.

Final answer:

The amount of liquid in the smaller graduated cylinder is measured by reading at the bottom of the meniscus, with the value estimated to the nearest tenth of a milliliter. To accurately measure 9.7 mL of water, a graduated cylinder is used, allowing for readings with three significant figures. Significance in measurements is determined by the precision of the measuring device.

Explanation:

To determine how many milliliters of liquid the smaller graduated cylinder contains, one should make a reading at the bottom of the meniscus. When measuring the volume of liquid in a graduated cylinder, you must mentally subdivide the distance between the milliliter marks to estimate the measurement more precisely. If the meniscus falls between the 21 and 22 mL marks, you estimate to the nearest tenth of a milliliter to measure the volume as accurately as possible.

For instance, if you are to deliver 9.7 mL of water, you would use a graduated cylinder with markings adequate to measure to the nearest tenth of a milliliter, allowing you to read the volume with three significant figures. This is because graduated cylinders are typically precise enough to measure small amounts in milliliters with that level of precision.

To convert to milliliters and consider significant figures, remember that when working with measured quantities, like the volume of 22.4 L/mol for molar volume, three significant figures is typically the maximum number of significant figures used. Therefore, when reading a graduated cylinder, always consider the precision of the device to determine the correct number of significant figures to report for your measurement.

Scientific notation 0.000002

Answers

2x10^-6 Move the decimal so there is one non-zero digit to the left of the decimal point. The number of decimal places you move will be the exponent on the 10.

The exponent just on ten will be the amount of decimal points you advance. The scientific notation of 0.000002 is 2x10⁻⁶.

What is scientific notation?

Scientific notation is indeed a method of communicating numbers that are either too large or too little to be represented in decimal form. It is also known as 'scientific form' in the United Kingdom, and it is often used among scientists, mathematicians.

The first is merely the digits, with both the decimal place put after the very first digit, and the second is multiplication by 10 to a components impacting of decimal points, which places the decimal place where it used to be. Shift the decimal towards left of decimal point to ensure that there is 1 non-zero digit. The exponent just on ten will be the amount of decimal points you advance. The scientific notation of 0.000002 is 2x10⁻⁶.

Therefore, the scientific notation of 0.000002 is 2x10⁻⁶.

To learn more about scientific notation, here:

https://brainly.com/question/18073768

#SPJ2

Almonds may be small, but they pack a great number of nutrients, including protein, vitamin E, and vitamin B2. Almonds also contain antioxidants and monounsaturated fat, a “good” type of fat that, like the omega-3 fatty acids, reduces the risk of heart disease.

Review the graph that represents the whole class data. Notice that the almond samples provide a large amount of chemical energy. What is the BEST explanation for this large amount of available energy?

A) Vitamins, like vitamin E and B2, contain large amounts of usable chemical energy.

B) Fats and proteins are molecules with many chemical bonds; the bonds release much energy when broken.

C) The energy provided by the almonds is related to mass rather than the chemical composition of the almond.

D) Monounsaturated fats, the good fats, contain many chemical bonds that release large amounts of chemical energy.

Answers

The answer B. Fats and proteins are molecules with many chemical bonds; the bonds release much energy when broken. Typically, our bodies would use the fat for energy. Proteins are used to build and run (enzymes) our body. But they can still be used as a source of chemical energy.

Option B is correct.

What should be done with an unused or used chemical once it has been taken from the original container?

Answers

If there is any unused Chemicals left in the container it should be properly disposed and chemicals taken out of the original container should not be poured back into the container because it can be contaminated

All atoms of an element always have the same number of question 4 options: electrons protons electrons neutrons save

Answers

All atoms of an element always have the same number of protons (the positively charged subatomic particle).

Isotopes of the element differ in the mass which means that they differ in the number of the neutrons (which are the subatomic particles having no charge).

At neutral state only will the number of protons be equal to the number of electrons in an atom.

why do scientists state that an atom is mostly empty space

Answers

I think that they state that because there is a lot of space between the nucleus and the electrons.


I THINK

Since heat transfers take place only between systems with different temperatures, explain why the third law of thermodynamics is supported by our current understanding of matter

Answers

Final answer:

The third law of thermodynamics is aligned with our understanding of matter and heat transfer because it is consistent with the tendency of energy to spontaneously transfer from hotter to colder systems, a concept supported by the second law of thermodynamics and energy conservation principles.

Explanation:

The student's question addresses why the third law of thermodynamics is supported by our current understanding of matter, particularly considering that heat transfers occur only between systems with different temperatures. The third law of thermodynamics implies that as the temperature of a system approaches absolute zero, the entropy, or disorder, of the system approaches a minimum value. This law is supported by the fact that matter has a property called thermal conductivity, meaning that energy is transferred spontaneously from a higher temperature system to a lower temperature system because the disorder is more probable, and there is a tendency towards energy dispersion.

These concepts are also tied to heat, which is the process of energy transfer due to temperature differences, and the second law of thermodynamics, highlighting that energy transfers are never completely efficient and some energy is always lost as heat. Furthermore, the concept of energy conservation within the first law of thermodynamics states that the total energy of a system is conserved during such interactions. Overall, this understanding is crucial for comprehending the limitations and behaviors in the transfer of energy between systems.

Ted wants to hang a wall clock on the wall by using a string. If the mass of the wall clock is 0.250 kilograms, what should be the tension of the string so that it can sustain the weight of the wall clock?

Answers

the tension should be 0.25
T=mg+ma the formula for tension when object not moving.
T=tension
m=mass
g=acceleration of gravity
a=acceleration

a=0 since its not moving.

A cheeseburger from a fast food restaurant contains 19 g of fat, 20 g of carbohydrate, and 28 g of protein. how many kcal of energy does the cheeseburger contain? (the accepted caloric values for foods are 4.0 kcal/g for carbohydrate, 9 kcal/g for fat, and 4 kcal/g for protein.) report the answer to 2 significant figures.

Answers

We simply get the sum of the product of each mass and caloric values.

Total energy = 19 g * 9 kcal / g + 20 g * 4 kcal / g + 28 g * 4 kcal / g

Total energy = 363 kcal

 

Rounding of f to 2 significant fig:

Total energy = 360 kcal

The measure of heat and energy present in the fuel and food is called the calorific value. The calorific value is measured in kilojoule per kilogram (KJ/Kg)

The total energy of one meal is calculated by directly adding the energy given by carbohydrates, fats and proteins.

The energy can be calculated as:

Energy from 1 gm of carbohydrate = 4.0 kcal/g

       Then, the energy from 20 g of carbohydrate = 20* 4 kcal/g

       = 80 kcal/g

Energy from 1 gm of fats = 9.0 kcal/g

       Then, the energy from 19 g of fats= 19* 9 kcal/g

       = 171 kcal/g

Energy from 1 gm of protein = 4.0 kcal/g

       Then, the energy from 28 g of protein = 28* 4 kcal/g

       = 112 kcal/g

Now add the energy from all the constituents:

      Total energy = 80 kcal/g + 171 kcal/g + 112 kcal/g

       = 363 kcal/g

Therefore, the total amount of kcal of energy present in the cheeseburger is 363 kcal.

To learn more about total energy and calories refer to the link:

https://brainly.com/question/19928430

What is the mass of a sample of a substance with a volume of 120 ml and a density of 0.75 g/ml?

Answers

Answer:

Density=mass / volume.

0.75= mass / 120.

mass= 0.75×120.

mass=90g

Write net ionic equation to show the reaction of aqueous hg2(no3)2 with aqueous sodium chloride to form solid hg2cl2 and aqueous sodium nitrate.

Answers

Final answer:

The net ionic equation for the reaction is Hg2^2+(aq) + 2Cl-(aq) → Hg2Cl2(s).

Explanation:

The net ionic equation for the reaction between aqueous Hg2(NO3)2 and aqueous sodium chloride to form solid Hg2Cl2 and aqueous sodium nitrate is as follows:



Hg2^2+(aq) + 2Cl-(aq) → Hg2Cl2(s)



This net ionic equation represents the actual chemical change that occurs in the reaction, focusing only on the species that are directly involved in the formation of the solid product and neglecting the spectator ions. The balanced molecular equation and complete ionic equation for this reaction include the spectator ions but are not essential to represent the fundamental chemical change.

What is the cost of 1.5 pound of sugar if sugar costs $1.37 per 5.0 pounds?

Answers

Set it up like a proportion. Answer: about $.41

Identify the species oxidized. 2 al3+(aq) + 2 fe(s) → 2 al(s) + 3 fe2+(aq)

Answers

To know the answer, compare the oxidation number of the element in the reactant and the product side. The oxidation number of Al was originally +3, then became 0 after the reaction. On the other hand, Fe was originally 0, then became +2 after the reaction. When the element is oxidized, it oxidation number increases. Thus, the element oxidized is Fe.

The species oxidized in the reaction is Iron Fe.

The oxidation number assigned to Al is +3

The  oxidation number assigned to Fe is +2

Here, in the reaction the oxidation number of iron Fe is increased to +3

Hence, we can conclude that the species oxidized in the reaction is Iron Fe.

To know more about oxidation number, refer to the link:

https://brainly.com/question/15167411?referrer=searchResults

If your lab procedure instructs you to add two parts of acid to each one part of water and you start with 25 ml of water, how much acid will you add, and how will you add it

Answers

When the ratio is given in parts, there is no strict rule on the units of measurement. It is a general term that is applicable to any unit. For example, the unit here is in mL. Since the ratio is 2 parts acid to 1 part water, that is also equivalent to 2 mL acid to 1 mL water. Hence, you have to add 2 mL of acid to water, not vice versa. Other acids are highly reactive to water. So, you have to add the acid slowly to avoid violent reactions.

In the measurement 0.503 L , which digit is the estimated digit ?

Answers

The estimated digit is dependent on the least count of the instrument being used. If the least count is 0.1 and the reading is between two divisions of the least count, then the estimated digit will be in the tenths, or 0.1 place. In this case, the estimated digit is 3, meaning the least count is 0.001.

The estimated digit in the measurement 0.503 L is the last digit, 3.

In the measurement 0.503 L, the digit that is estimated is the last digit, which is 3. This is because precision in measurement dictates that the final digit reported is always the one that has some level of uncertainty or estimation. Therefore, in 0.503 L, the precise digits are 0, 5, and the estimated digit is 3.

Put the steps of the scientific method into the correct order.

Answers

The scientific method is a systematic way of questioning about the world around us and answering questions. The number of steps varies from one description to another, mainly when data and analysis are separated into separate step, but this is a fairly standard list of 6 scientific method steps, which you are expected to know for any science class:

1. Form a Hypothesis. This is a sort of educated guess about what you expect. 
2. Design an Experiment to test your hypothesis. An experiment has an independent and dependent variable. You change or control the independent variable and record the effect it has on the dependent variable.
3. Conduct Experiment
4. Record data and observations and analyze what the data means. Often, you'll prepare a table or graph of the data.
5. Form a Conclusion. Conclude whether to accept or reject your hypothesis. Communicate your results.

Answer:

Make a hypothesis ---> Conduct an experiment --->Analyze the experimental data ---> Communicate the results

Explanation:

Why is the huronian supergroup rock formation particularly interesting to scientists

Answers

scientists enjoy the rocks
Final answer:

The Huronian Supergroup is interesting to scientists due to its age, the presence of primitive rock, and evidence of past watery environments. It gives unique insight into the planet's early history.

Explanation:

The Huronian Supergroup rock formation is particularly interesting to scientists for many reasons. This rock formation is known for being one of the oldest exposed rock formations available for study, providing crucial insights into the early history of the Earth.

One significant feature is the presence of primitive rock, which has largely escaped chemical modification by heating. This kind of rock is usually only found in comets, asteroids, and small planetary moons, so its presence on Earth in the Huronian Supergroup is of particular interest to scientists because this material represents the original material out of which the planetary system was created.

The presence of layered sedimentary rock with evidence of evaporation also suggests that this area was once underwater, possibly a shallow saltwater lake. The presence of hematite within the rocks, which forms only in watery environments, also supports this theory. This information is vital to creating accurate models of the past climates and environments of the planet.

Learn more about Huronian Supergroup here:

https://brainly.com/question/34277680

#SPJ11

Other Questions
What did galileo discover in his legendary experiment on the leaning tower of pisa? According to the constitution, who is responsible for electing the president and vice-president? A glacier advanced down a mountain from an elevation of 2010 m to 1780 m in 5 years. what was the glaciers rate of change Simplify using exponents: B12/B5 Is the process of bananas ripening a chemical change or a physical change? explain? the quotient of a number and -2 Triangle MNO is an equilateral triangle with sides measuring units. What is the height of the triangle? NR units The ____between the king and his colonial subjects was more about interests than miles. An inkjet printer's speed is measured in ____. select one:a. cpsb. ppsc. ppmd. dpi What happens if there is air in the needle? Why is it important for a reader to learn traditional plot format? Although cells have differences that reflect their specific functions in the body, what functions do they have in common? Jeremy drew a polygon with four right angles and four sides with the same length. Name all the polygons that he could have drawn why did sharecropping and share tenancy develop Using algebraic equation to find the measures of the two angles described below Begin by letting X represent the degree measure of the angle supplement the measure of the angle is 17 times greater than its supplement what is the measure of the supplement what is the measure of the other angle what have scientist used to determine that there may have been a drought during the time jamestown was settle HELP FAST PLEASE!!!!!!!!!!!An organ is a structure made up of two or more tissues working together to perform a specific function. Which of the following organs would contain the most nerve tissue according to its functional role in the body? A. lungs B. heart C. stomach D. brain Which of the following is the LEAST helpful action children and adolescents can take to combat obesity? A.adding berries or bananas to cereal or toast B.drinking more fruit juices to replace water C.doing jumping jacks during commercial breaks D.trading healthy recipes with friends Compare and contrast expressions equations and inequalities True or False? Facts and Figures are examples of variables? If it's false explain how you can fix it. Steam Workshop Downloader