(a) calculate the molarity of a solution made by dissolving 0.0815 mol na2so4 in enough water to form exactly 550. ml of solution.
Which element is placed in the same period as ruthenium but has a higher atomic number than it
Answer:
The answer is Silver.
Explanation:
The complete question is:
"Which element is placed in the same period as ruthenium but has a higher atomic number than it? bismuth osmium silver zirconium"
In the periodic table the elements are arranged so that those with similar chemical properties are located close to each other.
The horizontal rows of the periodic table are called periods. The elements that make up the same row have different properties but similar masses: all the elements of a period have the same number of orbitals. In other words, the period that an element occupies coincides with its last electronic layer. In other words, an element with five electronic layers will be in the fifth period.
The atomic number is represented by the letter Z and is the number of protons that have their atoms in the nucleus. The atomic number of silver [47] is higher than that of ruthenium [44] because silver has higher number of protons more than ruthenium. Ruthenium and silver are in the same period and they have the same number of atomic orbital but have different atomic numbers.
So the answer is Silver.
What is the mass of a single fluorine molecule, f2?
A(n) _______ is a substance of two or more atoms held together with chemical bonds.
If you measure the mass of a liquid is 11.50 g and its volume as 9.03 ml how many significant figures should its density value have
To get a result with the best degree of precision, the number of significant figures should be equal to the smallest number of significant figures of the given numbers. In this case, the smallest is 3 as given by the number 9.03 mL.
Therefore density is:
11.50 g / 9.03 mL = 1.27 g/mL
Answer:
Three(3) significant figures.
Explanation:
Okay, we are given the following values from the question; mass of the liquid = 11.50 grams(g) = four significant figures and the volume of the liquid= 9.03 millitres (mL) = three significant figures. And then we are to find how many significant figures our answer is going to be. Is it three significant figures, four significant figures or even more?. Before deciding what number of significant figures we are going to use for our answer let us find the value for the density first.
The formula for density is; mass/ volume.
==> 11.50 grams/ 9.03 ml. (Since we are not concerned about the units; the question did not specify us to use any unit, so we will let it be).
=> 1.27353266888 (grams/mL).
So, the rule for rounding off says that: (1). If you are operating on addition and subtraction, you should round off based on decimal numbers from your data that has the least and,
(2). If you are operating on multiplication and division, then you should go for your data value that has the least significant figures.
So, the second rule applies here, and from the question the value with the least significant figures is 9.03 which has three(3) significant figures.
.
Which step comes last in the scientific method?
testing a hypothesis
developing a theory
conducting an experiment
proposing a hypothesis
Answer: developing a theory
Explanation: Scientific method are the methods which help us to get acknowledged with the new facts and theories which have been tested by the scientists through rigorous experimentation.
So the first step of scientific method is proposing a theory in which the scientists propose their facts and views under the name of the theory.
After proposing the hypothesis, testing of the hypothesis will take place by conducting an experiment. After the experiment has been conducted then only they can develop a theory and this will be their final step.
Thus the last step will be the 'developing a theory' .
If a small amount of the unknown solute fails to dissolve in the lauric acid, will the molar mass that you calculate for unknown solute be too high or too low?
an atom of calcium loses two electrons. What is the charge on an ion of calcium?
a. +3
b. 0
c. -2
d. +2
The electrical charge of the calcium ion is +2.
If an atom of calcium loses two electrons, the charge that will be occupied on an ion of calcium is +2. Thus, the correct option for this question is D.
What are Electrons?Electrons may be defined as the type of sub-atomic particles that are consistently revolving around the nucleus of an atom. These sub-atomic particles are negatively charged in nature. The discovery of electrons is known to be done by J.J. Thomson.
It is the phenomenon that when an atom loses its electrons, it will definitely occupy the positive charge on its atom.
While when an atom gains electrons from another atom, it will occupy the negative charge on its atom.
In the above example, an atom of calcium loses two electrons, so it will occupy the charge of +2 on its atom.
Therefore, if an atom of calcium loses two electrons, the charge that will be occupied on an ion of calcium is +2. Thus, the correct option for this question is D.
To learn more about Electrons, refer to the link:
https://brainly.com/question/23390564
#SPJ2
If you were to place the beaker containing the products of the reaction between copper ii chloride and aluminum on a balance, how would the mass of these products compare to the mass of the initial reactants. explain your answer.
The laws of electrostatics predict that protons will
Which term best describes an animal that eats dead and decaying meat? A. predator B. producer C. decomposer D. scavenger
A substance that can be separated into two or more substances only by a chemical change is a(n) _____. (1 point) solution element mixture compound
A compound is a substance that can be separated into simpler substances and elements only by a chemical change.
Explanation:A compound is a substance that contains two or more elements chemically combined in a fixed proportion. It can only be separated into simpler substances and elements through a chemical change. Unlike mixtures, compounds have different chemical and physical properties compared to their individual elements.
How to tell if a compound is aqueous solid or liquid, or a gas?
Consider this reaction:
Zn(s) + 2HCl(aq) ZnCl2(aq) + H2(g).
Which change could decrease the rate of production of ZnCl2?
Answer:
Lowering the volume of H2 gas
Explanation:
According to Le Chatelier's principle when a reaction is at equilibrium is subject to changes in temperature, pressure and concentration the equilibrium will then shift in a direction to undo the effect of the induced change.
The given reaction is:
[tex]Zn(s) + 2HCl(aq)\rightleftharpoons ZnCl2(aq) + H2(g)[/tex]
In order to decrease the rate of production of ZnCl2 the reaction needs to shift to the left. This can be achieved by lowering the volume of H2 gas which would increase its pressure. Based on Le Chatelier's principle, this would shift the equilibrium in a direction that would lower the H2 pressure i.e. to the left thereby also decreasing the production of ZnCl2.
Atoms of the same element that have different numbers of neutrons are classified as
In the periodic table, the elements are organized into groups based on
Why do chemists sometimes refer to the process of joining sugars as condensation reactions?
Alcohol and water have different boiling points. Which method would you use to separate them
Answer:
Distillation.
Explanation:
Distillation is the separation technique which can be used for separation of any two liquids of different boiling points.
The boiling point of water is near 100 degree celsius while that of alcohol is less than it.
So if we separate them with distillation, then alcohol will separate out first.
If two liquids have close boiling points then we can use fractional distillation.
Which of the following is not equal 225 g?
A. 0.225 kg
B. 22,500 cg
C. 2.25 dkg
D. 2250 dg
Answer: C) 2.25 dkg
Explanation: 1 kg = 1000 g
A) [tex]0.225kg(\frac{1000g}{1kg})[/tex] = 225 g
B) cg stands for centigrams. 1 g = 100 cg
So, [tex]22500cg(\frac{1g}{100cg})[/tex] = 225 g
C) dkg stands for decagrams. dag is also used in place of dkg which also means decagram.
1 dkg = 10 g
[tex]2.25dkg(\frac{10g}{1dkg})[/tex] = 22.5 g
D) dg stands for decigram.
1 g = 10 dg
[tex]2250dg(\frac{1g}{10dg})[/tex] = 225 g
On converting all the given mass units to grams, we see that it's choice C which is not equal to 225 g and so it is the right choice.
Which of the following properties is the temperature at which a liquid turns to gas?
Answer: Boiling Point
Explanation: The temperature at which a liquid turns into the gas is known as Boiling Point.
Boiling point is defined as the temperature in which the liquid phase of any substance is converted into the vapor state.
Boiling point of the liquid varies depending upon the the environmental surroundings. Its is the rapid vaporization of the liquid. It has ability to get reduced when the external pressure increases.
O which type of molecules, polar or nonpolar, dissolves in water
The type of molecules that dissolves in water is polar.
O which type of molecules mdissolves in water?Polar molecules tend to dissolve in water more readily than nonpolar molecules. This phenomenon is often summarized by the phrase "like dissolves like." Water is a polar molecule, meaning it has an uneven distribution of charge due to its bent molecular structure. The oxygen atom in water is more electronegative than the hydrogen atoms, leading to a partial negative charge (δ-) on the oxygen and partial positive charges (δ+) on the hydrogen atoms.
Polar molecules have their own partial charges, which can interact with the charges on water molecules through a process called hydrogen bonding. This interaction allows polar molecules to mix well with water and become surrounded by water molecules, forming a solution.
Nonpolar molecules, on the other hand, lack significant partial charges and cannot form strong hydrogen bonds with water molecules. As a result, nonpolar molecules do not dissolve as readily in water. Instead, they tend to aggregate together and exclude water molecules, leading to poor solubility in water.
Examples of polar molecules that dissolve well in water include substances like salts, sugars, and many types of organic molecules containing polar functional groups (such as alcohols and acids). Nonpolar molecules like oils, fats, and hydrocarbons have lower solubility in water and often separate from water to form distinct phases.
Learn more about water at:
https://brainly.com/question/1313076
#SPJ2
Polar molecules dissolve in water because they can interact with water's polar nature through dipole-dipole interactions and hydrogen bonding. Nonpolar molecules do not dissolve well in water, as they lack the polar characteristics needed to interact with water molecules. This can be remembered by the phrase 'like dissolves like'.
Water is a polar molecule, which means it has a partial positive charge at one end and a partial negative charge at the other due to the unequal sharing of electrons between the hydrogen and oxygen atoms. This characteristic allows water to dissolve other polar substances through dipole-dipole interactions and hydrogen bonding.
Therefore, polar molecules tend to dissolve in water because they can interact with water's polar nature. Nonpolar molecules, on the other hand, do not dissolve well in water because there is no charge for them to interact with, and they cannot form significant interactions with the water molecules. This concept is commonly summarized by the phrase 'like dissolves like,' meaning that polar solvents like water are good at dissolving other polar substances, while nonpolar solvents are more suited for dissolving nonpolar substances.
The density of mercury metal is 13.6 g/ml. what is the mass of 2.5 l
Answer: The mass of mercury is 34000 grams.
Explanation:
To calculate mass of a substance, we use the equation:
[tex]\text{Density of substance}=\frac{\text{Mass of substance}}{\text{Volume of substance}}[/tex]
We are given:
Density of mercury = [tex]13.6g/ml[/tex]
Volume of mercury = [tex]2.5L=2500ml[/tex] [tex]1L=1000mL[/tex]
Putting values in above equation, we get:
[tex]13.6g/ml=\frac{\text{Mass of mercury}}{2500ml}\\\\\text{Mass of mercury}=34000g[/tex]
Hence, the mass of mercury is 34000 grams.
Which statement applies to electronegativity?
A.) Electronegativity increases across a period.
B.) All atoms with the same number of electron shells have equal
electronegativities.
C.) Electronegativity is the amount of energy required to remove an electron from
a gaseous atom.
D.) Electronegativity increases down a group.
Answer: The correct answer is Option A.
Explanation:
Electronegativity is defined as the tendency of an atom to attract the shared pair of electrons towards itself whenever a bond is formed.
This property increases as we move from left to right across a period because the number of charge on the nucleus gets increased and electrons are attracted more towards the nucleus.
This property decreases as we move from top to bottom in a group because the electrons get add up in the new shells which make them further away from the nucleus.
Thus, the correct answer is Option A.
What is the symbol of the element in group 4a 14 and period 2?
How do u convert 0.171 tsp into drops
Which process is responsible for the greatest loss of energy from Earth’s surface into space on a clear night?
The greatest loss of energy from Earth's surface into space on a clear night occurs through radiative heat transfer, with the lack of clouds allowing more heat to escape as infrared radiation.
The process responsible for the greatest loss of energy from Earth's surface into space on a clear night is radiative heat transfer to cold outer space. The absence of clouds on clear nights means that energy can be lost more easily as infrared radiation, cooling the Earth's surface. Clouds act like insulators due to their lower emissivity, reflecting some of the radiation back to Earth and thereby reducing heat transfer. Whereas during cloudy nights, the clouds absorb and re-emit infrared radiation, keeping the surface warmer. Furthermore, the presence of greenhouse gases also reduces heat loss, acting like a blanket that keeps the Earth warm.
Which of the pairs of molecular structures shown below depict enantiomers (enantiomeric forms) of the same molecule?
Final answer:
Enantiomers are stereoisomers that are non-superimposable mirror images with identical physical properties but differing in their interaction with polarized light and other chiral molecules. Structure I and II, with the opposite configuration of chiral centers, are enantiomers if they are non-superimposable.
Explanation:
Enantiomers are a type of stereoisomers, which have the same molecular formula and bond connectivity but differ in the three-dimensional spatial arrangement of atoms. These molecules are non-superimposable mirror images of each other. If we consider two structures labeled A and B, and they possess this mirror image relationship, A and B are enantiomers.
For two structures to be enantiomers, each chiral center in one molecule must have the opposite configuration (R or S) than the corresponding chiral center in the other molecule. This results in a pair of enantiomers having identical physical properties such as melting point, boiling point, and density. However, they differ in the way they interact with polarized light and with other chiral molecules, such as proteins.
In the given example where structure I has R and S configuration and structure II has S and R configuration, these structures are indeed enantiomers of each other, assuming they are non-superimposable mirror images.
What is the driving force for the reaction of hcl(aq) and naoh(aq)?
The reaction between HCl and NaOH, an acid-base reaction, is driven by proton transfer from acid to base. The resulting products are water and salt, as represented by the molecular and net ionic equations. The forward drive of the reaction is due to stability from water formation and heat release.
Explanation:The driving force for the reaction of HCl(aq) and NaOH(aq) is the transfer of a proton (H+) from the acid (HCl) to the base (NaOH). This process is known as an acid-base reaction. The result is the formation of water (H2O) and a salt (NaCl), which is exothermic in nature, meaning it releases heat.
This can be represented by the molecular equation: HCl(aq) + NaOH(aq) -> NaCl(aq) + H2O(l)
And the net ionic equation: H+(aq) + OH-(aq) -> H2O(l)
The reaction is driven forward due to the formation of stable water molecules and the release of heat.
The driving force for the reaction between HCl(aq) and NaOH(aq) is the formation of a precipitate, which is a solid product that forms when two solutions are mixed. In this reaction, sodium chloride (NaCl) is formed as a solid precipitate. The balanced molecular equation for the reaction is:
HCl(aq) + NaOH(aq) → NaCl(aq) + H₂O(l)
This equation shows that one molecule of hydrochloric acid reacts with one molecule of sodium hydroxide to form one molecule of sodium chloride and one molecule of water.
Learn more about Acid-base reaction here:https://brainly.com/question/15209937
#SPJ11
Part
b.1. 6 m h2so4 is carelessly substituted for 6 m hcl. will more or fewer drops of 6 m h2so4 be required for the litmus to change color? explain.
A major component of gasoline is octane c8h18 . when octane is burned in air, it chemically reacts with oxygen gas o2 to produce carbon dioxide co2 and water h2o . what mass of water is produced by the reaction of 9.8g of octane