How much would you have to raise the temperature of a copper wire (originally at 20 ?c) to increase its resistance by 18 % ? the temperature coefficient of resistivity of copper is 0.0068 (?c)?1?

The force of impact is the same as driving your vehicle off a 10.0 story structure.

Given the following data:

Conversion:

In this exercise, you're required to compare the force of impact with an equivalent height. Thus, we would use the following formula to calculate the height:

[tex]H = \frac{V^2}{2g}[/tex][tex]H = \frac{V^2}{2g}[/tex]

Where:

Substituting the parameters into the formula, we have;

H = \frac{26.82^2}{2(9.8)}

H = 36.70 meters.

Assuming a distance of 3.6 meters:

Height = \frac{36.70}{3.6}

Height = 10.0 meters.

Read more on forces here: brainly.com/question/1121817

Answer:

C. 1,314,718 J

Explanation:

The heat energy needed to raise the temperature of the coal is given by:

[tex]Q=m C_s \Delta T[/tex]

where:

m = 5 kg is the mass of the coal

[tex]C_s = 1314 J/kg ^{\circ}C[/tex] is the specific heat of coal

[tex]\Delta T= 220^{\circ}C-20^{\circ}C=200^{\circ}C[/tex] is the increase in temperature

Substituting into the formula, we find

[tex]Q=(5 kg)(1314 J/kg ^{\circ}C )(200^{\circ}C)=1,314,000 J[/tex]

So, the closest option is

C. 1,314,718 J

Answer: Charge and distance

Explanation:

Answer:

Mass, m = 2000

Explanation:

Given that,

Force acting on the truck, F = 2000 N

Acceleration of the truck, [tex]a=1\ m/s^2[/tex]

To find,

The mass of the car

Solution,

The second law of motion gives the relationship between the mass force and the acceleration. It is given by :

[tex]F=ma[/tex]

[tex]m=\dfrac{F}{a}[/tex]

[tex]m=\dfrac{2000\ N}{1\ m/s^2}[/tex]

m = 2000 kg

So, the mass of the car is 2000 kg.

The gravitational force the asteroids exert on each other will be one fourth of their initial force.

Any two bodies will be attracted to one another by the force of gravity, also known as gravity. There is an attraction between every thing in the cosmos, but most of the time it is too faint to be noticed due to the extreme distance between the objects. Furthermore, although the influence of gravity is weaker as objects are moved away, its range is infinite.

We know that, gravitational force acting between two bodies,

F=[tex]\frac{ G m_1 m_2}{r^2}[/tex]

Where, G = universal gravitational constant

m₁ and m₂ are masses of the two bodies and r is distance between them.

Let, the masses of the two asteroids are M₁ and M₂ and initial distance between them is R.

Hence, gravitational force they exert on each other, F₁ =[tex]\frac{ G M_1 M_2}{R^2}[/tex]

Now, when the distance between two asteroids is doubled, that is 2R, the gravitational force they exert on each other will, F₂ = [tex]\frac{ G M_1 M_2}{(2R)^2}[/tex] = [tex]\frac{1}{4}[/tex] [tex]\frac{ G M_1 M_2}{R^2}[/tex] = [tex]\frac{1}{4}[/tex] F₁

Hence, the final gravitational force is one-fourth of the initial one.

Learn more about gravitational force here:

https://brainly.com/question/12528243

#SPJ5

Part A: Make a free-body diagram of this ball just before it hits the wall.

The only force acting on the ball is the pull of the Earth, this is its weight; so the diagram is a vertical vector downwards.

Part B: Make a free-body diagram of this ball just after it has bounced free of the wall.

Again, the only force acting on the ball is the pull of the Earth, its weight, and the free-body diagram is identical to that of the part A.

Part C: Make a free-body diagram of this ball while it is in contact with the wall.

Answer:

(a) Emerging adulthood.

Explanation:

Emerging adulthood is a period between teenagers' dependence on guardians and grown-ups' long haul duties in adoration and work, and during these years, rising grown-ups center around themselves as they build up the information, abilities, and self-understanding they will requirement for grown-up life.

So the correct option is (a)

The helium atom exhibit more visible emission lines than hydrogen atom as hydrogen has one electron per atom, while helium atom has two electrons per atom.

Emission lines are generally used to determine the atoms and the molecules.

A emission line is formed when a electron falls behind the low-level state of energy by freeing a photon.

Difference between the helium visible emission lines and hydrogen visible emission lines-

Hence, the helium atom exhibit more visible emission lines than hydrogen atom as hydrogen has one electron per atom, while helium atom has two electrons per atom.

Learn more about the emission lines here;

https://brainly.com/question/19706211

Helium exhibits more visible emission lines than hydrogen due to its complex electron energy level structure. As helium has two electrons and more possible transitions, it results in more visible lines in its emission spectrum compared to hydrogen.

Helium exhibits more visible emission lines than hydrogen due to the complexity of its electron energy level structure. When energy is absorbed by an atom, electrons get excited and move to higher orbitals. When these electrons transition back to lower energy levels, they emit energy in the form of light at specific frequencies, which are visible as emission lines in an emission spectrum.

For Hydrogen, in its ground state, no electrons are in the higher-energy levels required to produce either emission or absorption lines in the visible part of the Balmer series, therefore, the spectral features of hydrogen in the visible range are limited primarily to the Balmer line that only excited hydrogen atoms produce.

Helium, on the other hand, has two electrons in different energy levels. As such, there are more possible transitions and hence more lines visible in its emission spectrum.

This concept is fundamental to our understanding of interstellar mediums and the chemical composition of celestial bodies. Recognizing the unique spectral features in visible light allows us to decode the mysteries of the universe.

https://brainly.com/question/31325355

#SPJ11

The binding energy of electrons to the magnesium surface can be calculated using the equation KE = hf - BE, where KE is the kinetic energy of the ejected electrons, hf is the energy of the incident photons, and BE is the binding energy. Given that the maximum velocity of the ejected electrons is 3.45 × 10^5 m/s, we can calculate the kinetic energy using the equation KE = (1/2)mv^2. Using the given wavelength of the photons (310 nm), we can calculate the energy of the photons using the equation E = hc/λ, where h is Planck's constant (6.63 × 10^-34 J.s), c is the speed of light (3.00 × 10^8 m/s), and λ is the wavelength in meters. By rearranging the equation to solve for the binding energy, we find that the binding energy is equal to the energy of the incident photons minus the kinetic energy of the ejected electron.

The binding energy of electrons to the magnesium surface can be calculated using the equation KE = hf - BE, where KE is the kinetic energy of the ejected electrons, hf is the energy of the incident photons, and BE is the binding energy. Given that the maximum velocity of the ejected electrons is 3.45 × 10^5 m/s, we can calculate the kinetic energy using the equation KE = (1/2)mv^2.

Using the given wavelength of the photons (310 nm), we can calculate the energy of the photons using the equation E = hc/λ, where h is Planck's constant (6.63 × 10^-34 J.s), c is the speed of light (3.00 × 10^8 m/s), and λ is the wavelength in meters.

By rearranging the equation to solve for the binding energy, we find that the binding energy is equal to the energy of the incident photons minus the kinetic energy of the ejected electrons.

https://brainly.com/question/33710857

#SPJ12

The binding energy of electrons to the magnesium surface is calculated to be approximately 0.62 eV.

To determine the binding energy of electrons ejected from a magnesium plate by photons with a wavelength of 310 nm, we use the photoelectric effect equation:

Calculate the energy of the photon (E(photon)):

Given:

Convert the photon energy from joules to electron volts (eV):

Calculate the kinetic energy (Ke) of the ejected electrons:

Convert the kinetic energy into electron volts (eV):

Calculate the binding energy (Eb):

Therefore, the binding energy of electrons to the magnesium surface is approximately 0.62 eV.

Answer: These planets are formed by rocks.

Explanation:

There are 2 types of planets in Our Solar System:

1. Inner planets: There are 4 planets which are considered as inner planets, these are Mercury, Venus, Earth and Mars. These planets are small and have rocky surface. Their time of revolution around the Sun is less than the outer ones. These planets have maximum number of moon till 2.

2. Outer planets: There are 4 planets which are considered as outer planets, these are Jupiter, Saturn, Uranus and Neptune. These planets are large and gaseous planets. Their time of revolution around the Sun is more than the inner ones. These planets have many moon.

Hence, the inner planets are believed to be formed of rocks.

Buoyant force due to the surrounding air on a man is 0.84 Newton

[tex]\texttt{ }[/tex]

The basic formula of pressure that needs to be recalled is:

Pressure = Force / Cross-sectional Area

or symbolized:

[tex]\large {\boxed {P = F \div A} }[/tex]

P = Pressure (Pa)

F = Force (N)

A = Cross-sectional Area (m²)

Let us now tackle the problem !

[tex]\texttt{ }[/tex]

Given:

Density of Air = ρ_air = 1.20 kg/m³

Weight of the man = w = 700 N

Density of the man = ρ = 1000 kg/m³

Asked:

Buoyant Force = F = ?

Solution:

We will use Archimedes' principle to solve the problem as follows:

[tex]F = \rho_{air} g V[/tex]

[tex]F = \rho_{air} g \frac{m}{\rho}[/tex]

[tex]F = \rho_{air} g \frac{w}{g\rho}[/tex]

[tex]F = \rho_{air} \frac{w}{\rho}[/tex]

[tex]F = 1.20 \times \frac{700}{1000}[/tex]

[tex]F = 0.84 \texttt{ Newton}[/tex]

[tex]\texttt{ }[/tex]

[tex]\texttt{ }[/tex]

Grade: High School

Subject: Physics

Chapter: Pressure

[tex]\texttt{ }[/tex]

Keywords: Gravity , Unit , Magnitude , Attraction , Distance , Mass , Newton , Law , Gravitational , Constant , Liquid , Pressure

The buoyant force due to the surrounding air on a man weighing 700 N is approximately 0.84 N. The ratio of the buoyant force to his weight is approximately 0.00120, which shows the buoyancy effect in air is minimal compared to his weight.

To calculate the buoyant force due to the surrounding air on a man weighing 700 N (equivalent to a mass of approximately 71.4 kg assuming g = 9.81 m/s2), we can use Archimedes' principle. This principle states that the buoyant force on an object immersed in a fluid is equal to the weight of the fluid displaced by the object. Since the man's average density is the same as that of water (about 1000 kg/m3), his volume V can be calculated using the formula:

V = mass / density = 71.4 kg / 1000 kg/m3 = 0.0714 m3.

The buoyant force (Fb) in air can then be calculated with the density of air (1.20 kg/m3):

Fb = density of air × volume × g = 1.20 kg/m3 × 0.0714 m3 × 9.81 m/s2 ≈ 0.841 N.

Therefore, the buoyant force is approximately 0.84 N.

To find the ratio of the buoyant force to the man's weight, we divide the buoyant force by the weight:

Ratio = Fb / weight = 0.841 N / 700 N ≈ 0.00120.

So, the ratio of the buoyant force to the man's weight is approximately 0.00120, which implies the effect of buoyancy in air is quite small compared to the weight of the man.

Miranda is the right answer

To solve for speed or rate use the formula for speed, s = d/t which means speed equals distance divided by time.

speed = distance/time

An inductor is just a coil of wire with magnetic properties. It is a device that stores electromotive force or energy in the form of magnetic field.  A current yields a magnetic field around it through a conductor. The pattern of flux for this magnetic field would be the number of concentric circle perpendicular to the detection of current. The capacity of the inductor is affected by the number of coils which would give more inductance, the material that is used for the coil, the cross sectional area of the coil and the length of the coil. For instance you have an 8 meters diameter coil with seven loops of wire. You place the coil on an area where there is a parked car. The inductance of the coil will be much larger compared to the coil without a parked car nearby because of the presence of the steel from the car. It changes the magnetic field of the coil because it acts as a core of the inductor.

The form of mechanical weathering is exfoliation, which refers to the peeling off of the outer layers of a rock due to physical forces. Hydration, carbonation, and oxidation represent forms of chemical weathering.

The weathering process that exemplifies a form of mechanical weathering is option C, exfoliation. Mechanical weathering, also known as physical weathering, refers to the process where rock is broken down into smaller pieces by physical forces without any changes in its chemical composition.

Exfoliation is a form of mechanical weathering that occurs when the outer layers of rock peel off in layers due to differential heating and cooling, or freeze-thaw cycles. In contrast, options A (hydration), B (carbonation), and D (oxidation) all depict processes of chemical weathering, wherein the rock's mineral composition itself changes.

https://brainly.com/question/29616569

#SPJ11

Final answer:

A vehicle traveling at 55 miles per hour covers approximately 80.67 feet in one second, calculated by converting miles per hour to feet per second.

Explanation:

To find out how many feet a vehicle travels in one second at a speed of 55 miles per hour, we can perform a unit conversion from hours to seconds. First, we need to determine how many feet are in a mile and then convert miles per hour to feet per second.

There are 5,280 feet in a mile, therefore:

Since there are 3,600 seconds in an hour, we divide the total feet per hour by the number of seconds in an hour to find the distance in feet per second.

So, a vehicle traveling at 55 miles per hour travels approximately 80.67 feet in one second.

Compared to energy-flow, which enters ecosystems as sunlight and leaves as heat, the flow of matter is continually recycled and conserved, obeying the law of conservation of mass.

Compared to energy-flow in ecosystems, the flow of matter is conserved and recycled. While energy enters an ecosystem, typically in the form of sunlight, and is eventually dissipated as heat, matter circulates within the ecosystem through various biotic and abiotic processes. The law of conservation of mass supports the notion that matter is neither created nor destroyed, but rather continuously reused and transformed. Substances like water, carbon, and nitrogen undergo recycling through ecosystems; essential for life, these elements are integral components of the food web, influencing the distribution and abundance of organisms.

Let us say that triangle XYZ has sides of XY, YZ, and ZX.

Each of the corners X, Y, and Z are located at their own (x, y) points.

If all of the triangle are transformed through translation by a movement of 2 units left and 1 unit down on the coordinate plane then we generate a triangle X’Y’Z’.

Then each of the corners X’, Y’ and Z’ are now located at (x – 2, y – 1) coordinates.

Since all of the corners were moved then we can also say that:

XY is congruent to X’Y’

YZ is congruent to Y’Z’

ZX is congruent to Z’X’

Since all sides are congruent, therefore all angles are also congruent.

Therefore the measure of angle x’ is equal to the measure of angle x.

Answer:

40 degrees