A driver must _______ for a school bus that is stopped with its red lights flashing on the opposite side of the road.
A student arranged the four cards sequentially in a row on the basis of the periods when these events occurred. The card showing the earliest event was placed on the extreme left. Which of these cards was placed third in the row?
An exoplanet has four times the mass and one-fourth the radius of the earth. find the acceleration due to gravity on its surface, in terms of g, the acceleration of gravity at earth's surface.
The acceleration due to gravity on the surface of the exoplanet is 16 times the acceleration of gravity on Earth's surface.
Explanation:To find the acceleration due to gravity on the surface of the exoplanet, we can use the information that it has four times the mass and one-fourth the radius of the Earth. Gravitational force is directly proportional to mass and inversely proportional to the square of the radius. Since the mass is four times greater and the radius is one-fourth, the gravitational force would be (4/1)^2 = 16 times stronger. Therefore, the acceleration due to gravity on the surface of the exoplanet would be 16 times the acceleration of gravity on Earth's surface, or 16g.
Learn more about Acceleration due to gravity here:https://brainly.com/question/21775164
#SPJ12
What is the wavelength of a proton traveling at a speed of 6.21 km/s? what would be the region of the spectrum for electromagnetic radiation of this wavelength?
The wavelength of the given proton is approximately 6.01 * 10⁻¹⁴ m, and this fits into the gamma rays region of the electromagnetic spectrum. The electromagnetic spectrum ranges from gamma rays to radio waves and the proton's wavelength indicates it being of higher energy.
Explanation:The wavelength of a proton can be found using the de Broglie wavelength formula:
λ = h / (m*v),
where h is Planck's constant 6.63 * 10⁻³⁴ J*s, m is the mass of the proton and v is its speed. So first convert the speed of the proton from km/s to m/s: 6.21 km/s * 1000 = 6210 m/s.
Then substitute into the formula:
λ = 6.63 * 10⁻³⁴ J*s / (1.67 * 10⁻²⁷ kg * 6210 m/s).
After the calculation, we find that the wavelength of the proton is approximately 6.01 * 10⁻¹⁴ m.
Now, we analyze the region of the electromagnetic spectrum for electromagnetic radiation of this wavelength.
The electromagnetic spectrum ranges from gamma rays (with wavelengths shorter than 10^-11 m) to radio waves (with wavelengths longer than 10⁻¹ m).
The calculated wavelength of the proton, 6.01 * 10⁻¹⁴ m, falls into the gamma rays region of the electromagnetic spectrum and inclines towards the higher energy end.
Learn more about Wavelength and Electromagnetic Spectrum here:https://brainly.com/question/28222121
#SPJ11
The wavelength of a proton traveling at 6.21 km/s, is approximately 6.37 x 10⁻¹¹ meters, The region of the spectrum for electromagnetic radiation of this wavelength is X-ray region of the spectrum.
To find the wavelength of a proton traveling at a speed of 6.21 km/s, we use the de Broglie wavelength formula:
λ = h / (m × v)
where:
λ is the wavelength,h is Planck's constant (6.626 x 10⁻³⁴ J·s),m is the mass of the proton (1.673 x 10⁻²⁷ kg), andv is the speed of the proton (6.21 km/s or 6210 m/s).First, substitute the given values into the formula:
λ = 6.626 x 10⁻³⁴ J·s / (1.673 x 10⁻²⁷ kg x 6210 m/s)
Next, calculate the denominator:
1.673 x 10⁻²⁷ kg x 6210 m/s = 1.039833 x 10⁻²³ kg·m/s
Then divide Planck's constant by this product:
λ = 6.626 x 10⁻³⁴ J·s / 1.039833 x 10⁻²³ kg·m/s ≈ 6.37 x 10⁻¹¹ meters
Region of the Spectrum
This calculated wavelength corresponds to approximately 6.37 x 10⁻¹¹ meters, which places it in the X-ray region of the electromagnetic spectrum.
in human activities how long would carbon stay as fossil fuels
A boat is heading across a river at a velocity of 25 mph. The river is flowing downstream at 10 mph. What is the actual velocity of the boat?
The actual velocity of the boat is 26.6 mph, at an angle of 18.4° to a line drawn across the river.
Explanation:The actual velocity of the boat is the resultant velocity of the boat's velocity and the river's velocity. To find the actual velocity, we need to add the vectors representing the boat's velocity and the river's velocity. Since the boat is heading across the river, its velocity is perpendicular to the river's velocity. Using vector addition, we can find that the boat's actual velocity is 26.6 mph at an angle of 18.4° to a line drawn across the river.
Learn more about Velocity here:https://brainly.com/question/34679635
#SPJ12
The actual velocity of the boat is determined by the vector sum of the boat's velocity and the flow of the river. This is calculated by finding the hypotenuse of a right angled triangle where one side is the velocity of the river and the other side is the velocity of the boat. The total velocity will be at an angle less than 45 degrees relative to the shore.
Explanation:To find the actual velocity of the boat, we need to consider both the boat's velocity and the river's downstream velocity. This is a concept known as relative velocity. In our case, the boat is trying to head straight across a river, similar to what is depicted in Figure 3.44. However, given the downstream flow of the river, the boat will actually move diagonally relative to the shore.
Since the river's current will affect the boat's movement, we will calculate the resultant velocity by using vector addition. In a coordinate system where the x-axis is parallel to the velocity of the river, and the y-axis is parallel to the velocity of the boat, the total velocity can be obtained via the Pythagorean theorem:
tot = √ ((25 mph)² + (10 mph)²)
Given that the speed of the river and the boat are not equal, the total velocity direction will be at an angle less than 45 degrees with respect to the shore or X-axis.
Learn more about Velocity here:https://brainly.com/question/34025828
#SPJ11
in an experiment researchers want to determine if the _____ Variable causes change in _____ variable
a) dependent , independent
b) confounding, independent
c) independent, dependent
d) dependent, extraneous
Answer: c). independent, dependent
Explanation:
An independent variable can be define as the variable which can be changed in an experiment. It can be manipulated manually. The effect of such alteration and manipulation can be observed on the dependent variable.
The dependent variable is the one which changes due to the changes and alteration done by the experimenter on the independent variable.
Choose if the quantity indicated is a vector or a scalar. Quantity: the number of coins in a piggy bank Type of quantity:
Scalars and vectors are different types of physical quantities, with scalars having only magnitude while vectors have magnitude and direction.
Scalars are physical quantities that have only a number value or magnitude, whereas vectors require both magnitude and direction. The number of coins in a piggy bank is a scalar quantity because it only represents the amount without any directional information.
How does a radio station know how many listeners?
How can 2 objects have the same temperature but different amount of thermal energy?
What is the effect on current through a circuit of steady resistance when the voltage is doubled?
An object is raised above the ground gaining a certain amount of potential energy. if the same object is raised twice as high, it gains:
If the same object is raised twice as high, it gains: double the potential energy.
Potential energy (P.E) can be defined as a type of energy possessed by an object (body) as a result of its position (height) above the earth. Thus, potential energy (P.E) is highly dependent on the height above the ground.
Mathematically, potential energy (P.E) is calculated by using the following formula:
[tex]Potential \;energy (P.E) = mgh[/tex]
Where:
m is the mass of object.g is the acceleration due to gravity.h is the height of an object.Since the height of the object is raised twice as high, it simply means the value of height (h) would be multiplied by two (2) and the potential energy (P.E) would double:
[tex]Height = 2[/tex] × [tex]height[/tex]
[tex]P.E = 2(mgh)[/tex]
In conclusion, raising the same object is raised twice as high, would cause the potential energy (P.E) to double (twice as much as the initial value).
The force of gravity is an inverse square law. this means that, if you double the distance between two large masses, the gravitational force between them __________.
If you double the distance between two large masses, the gravitational force between them decreases by a factor of four.
The law of inverse squares states that the gravitational force is inversely proportional to the square of the separation between the masses. The relationship can be described mathematically as follows:
F ∝ 1 / [tex]r^2[/tex]
where r is the distance between the masses and F is the gravitational force.
The inverse square connection causes the force to decrease to one-fourth of its initial magnitude when the distance (r) is doubled.
Thus, in other words, when the space between the masses is doubled, the gravitational force is reduced by a factor of 4.
For more details regarding gravitational force, visit:
https://brainly.com/question/32609171
#SPJ4
Describe how the motions of the particles that make up an object change when the object's change when the object's temperature increases.
When temperature of the object's change, the motion of its particles also change.
Kinetic energy of the constituent particles increased, when temperature is increased, and vise versa.
It is because as temperature increased, the particles get energy and start moving.
Therefore, when temperature of the object's change, the motion of its particles also change.
To know more about Kinetic energy,
https://brainly.com/question/999862
The motions of the particles that make up an object change when the object's temperature increases. Because if the object's temperature increases, the particles begin to move faster so the kinetic energy of the particles can go really fast, while the potential energy particles only increase when they go further apart.
Describe 4 common workplace practices that are risk factors for injury
A person is able to pull a rope with a force of 700 N. What is the minimum number of fixed and moveable pulleys that the person will require to lift up a 27,800 N elephant? Assume the pulleys themselves are weightless and the system has 100% efficiency.
Each pulley reduces the extra effort compulsory to lift the
elephant (light and 100% efficiency). If the elephant "weighs" 27,800
N and the person can apply 700 N,
27,800 / 700 = 39.7 which is about 40 N.
The answer that offers a combined # of 40 pulleys is computed by:
40 / 2 = 20
Therefore the answer is 20 fixed and 20 moveable.
What does Kelpers first law of planetary motion imply?
Anything that can make an object with mass move is called (2 points)
mass
weight
density
force
Answer:
D (force )
Explanation:
Why is gold often found in a pure form in nature
_________ is amount of “ground” an object moves from its starting point and __________ is how much “ground” and object covers in total.
Question options:
Displacement, distance
Speed, displacement
Distance, displacement
Movement, distance
I believe the question talks about displacement and distance. The difference of the two is that displacement is the linear distance or shortest distance drawn from the starting point until the final point while distance is the whole trip that is covered, so the answer is:
Displacement, distance
The correct answer is C.
Two balls are thrown straight up. the first ball is thrown with twice the initial speed of the second. ignore air resistance. how much higher will the first ball rise?]
The maximum power output of an engine is usually given in units called
Final answer:
Engine power output is typically measured in horsepower (hp), where 1 hp equals 746 watts (W). The watt is the SI unit for power, defined as 1 joule per second.
Explanation:
The maximum power output of an engine is commonly expressed in a unit known as horsepower (hp). The International System of Units (SI) for power is the watt (W), where 1 W is defined as 1 joule per second (1 J/s). However, in many applications, especially when referring to engines, power is frequently stated in horsepower. To convert horsepower to watts, recall the equivalence that 1 hp equals 746 W.
For instance, the power output of an engine might be specified as 100 hp, which translates to approximately 74.6 kilowatts (kW), since 1 kW equals to 1,000 watts.
The earths gravity pulls on the moon and keeps it in orbit. The moon's gravity _____.
a) doesn't affect anything
b) pulls back on earth
c) pushes the moon away from the earth
d) can only pull on smaller objects such as asteroids but has no effect on the earth
The earths gravity pulls on the moon and keeps it in orbit. The moon's gravity b) pulls back on earth
What is gravity ?The force that attracts a body towards the center of the earth, or towards any other physical body having mass is called gravity .
Due to gravity , a gravitation force exists because of which bodies attract each other . Gravitational force is an attractive force that exists between all objects with mass; an object with mass attracts another object with mass; the magnitude of the force is directly proportional to the masses of the two objects and inversely proportional to the square of the distance between the two objects.
Since both earth and moon have mass , the earths gravity pulls on the moon and keeps it in orbit and the moon's gravity pulls back on earth by their gravitation force of attraction and because of gravity
hence, correct option is b) pulls back on earth
learn more about gravity:
https://brainly.com/question/4014727?referrer=searchResults
#SPJ2
best describes an applied force?
Name three situations in which force is created. Describe the cause the cause of the force in each situation.
0.403 L is equal to:
4.03 mL
40.3 mL
403 mL
4,030 mL
Answer:
0.403 mL = 403 L
Explanation:
In this question, it is required to convert 0.403 litres to millilitres. We know that the conversion from L to mL is as follows :
1 litre = 1000 millilitres
For converting 0.403 L to ml we need to use above relation.
0.403 L is equal to 0.403 multiplied by 1000 so that we get 403 mL.
So, the correct option is (c) ''403 mL''. Hence, this is the required solution.
what most likley happens to the air at the beach at night
A container full of mercury weighs 1000g. the empty container weighs 320 g. the density of the mercury is 13.6 g? cm3. what is the volume of the box ?
Select the statement that best describes gravity.
Gravity is the force that draws objects closer to the Earth because of the positive or negative charge.
Gravity is the force of attraction between two objects; it is dependent upon the mass of the objects and the distance between the objects.
Gravity is the force that repels two objects of similar charges; it is dependent on the number of charged particles in the objects.
Gravity is the force of attraction between objects of similar weight; it is not a strong force when objects are close to each other.
Explanation:
Gravity is the force of attraction between two objects. It depends upon the mass of the objects and the distance between the objects. Mathematically, the force of gravity is given by :
[tex]F=G\dfrac{m_1m_2}{d^2}[/tex]
Where
G is the universal gravitational constant
[tex]m_1\ and\ m_2[/tex] are masses
d is the distance between two masses
So, statement (2) describes gravity "Gravity is the force of attraction between two objects; it is dependent upon the mass of the objects and the distance between the objects".
The volume of a ball was measured at 500.0 cm3, and then mass was measured on this triple beam balance. what would be the most accurate reading for the mass of the ball? g using this mass, what would be the most accurate calculation of density for the ball? g/cm3
We have that the mass and density are
[tex]m=404.2 g[/tex]
[tex]\rho=0.8084g/cm^3[/tex]
From the Question we are told that
The volume of a ball was measured at 500.0 cm3,
We have that if we are to measure a volume of 500cm^3 we have
mass [tex]m=404.2 g[/tex]
to find Density
[tex]\rho=\frac{m}{v}\\\\\rho=\frac{404.2}{500}[/tex]
[tex]\rho=0.8084g/cm^3[/tex]
For more information on this visit
https://brainly.com/question/19694949?referrer=searchResults