what is the difference between a atomic bomb and a nuclear reactor
Answer:
Explanation: an atomic bomb was designed as a weapon of mass destruction, and a nuclear reactor is designed as an immense power source for large cities or universities.
When does radioactive decay occur? question 4 options: when neutrons accumulate in the nucleus when the nucleus decays when an atom loses electrons when an atom gains electrons?
Answer:
when the nucleus decays
Explanation:
Identify reactants and products in a chemical reaction
In a chemical equation, reactants are the starting substances, located on the left side, and products are the substances formed, located on the right side. The combustion of methane, for example, has methane and oxygen as reactants and carbon dioxide and water as the products.
Explanation:To understand a chemical reaction, you need to first identify the reactants and products. Reactants are the substances that exist before the chemical reaction takes place and are usually located on the left side of a chemical equation. On the opposite side of the equation, you find the products, which are the new substances formed as a result of the chemical reaction.
For example, in the combustion of methane, methane (CH4) and oxygen (O2) are the reactants, while carbon dioxide (CO2) and water (H2O) are the products:
CH4 + 2O2 → CO2 + 2H2O
The chemical equation is balanced by ensuring that the number of atoms for each element is the same on both sides of the equation. This often involves adding coefficients before the chemical formulas of the reactants and products.
Then, in the light independent photosynthetic reactions, that energy is used to convert co2 into ________.
If the o2 is collected over water at 25 c (298 k) and 724.0 mm hg total pressure, how many mols o2 will a 1.00 l sample of collected gas contain?
Does seasonal temperature affect tides?
Which type of investigation would most likely be done to answer the question?
collective
comparative
descriptive
experimental
Seasonal temperatures do not directly affect the primary gravitational forces that cause tides, but a comparative investigation would be used to study potential indirect effects. Data comparison across seasons would explore any patterns in tidal changes related to temperature.
The impact of seasonal temperatures on tides is not direct but can be influenced by various factors such as thermal expansion of water or changes in atmospheric pressure. However, the primary causes of tides—gravitational forces from the Moon and the Sun—are not affected by seasonal temperatures.
To investigate the question 'Does seasonal temperature affect tides?' a comparative type of investigation would be most suitable. This approach involves collecting and comparing data over different seasons to identify any variance in tide patterns that could be related to changes in temperature.
When studying the mechanisms of temperature acclimation or seeking improvements in models of atmospheric carbon dioxide concentrations, two scientific questions to pose might include 'How do regional variations in temperature affect the local marine hydrology and ecosystems?' and 'What is the relationship between atmospheric carbon dioxide levels and seasonal changes in temperature?'
The diagram below shows the different phase transitions that occur in matter.
Which best describes the process that arrow 1 represents?
Molecules are speeding up during boiling.
Molecules are depositing as ice on a surface.
Molecules are slowing down during condensing.
Molecules are moving from stationary positions.
Answer : Option A) Molecules are speeding up during boiling.
Explanation : As shown in the above image it is clearly observed that the molecules are been transformed from liquid to gaseous state. Which means that the intermolecular distance between the molecules is increasing as they are boiling and getting transformed into gaseous form. They are speeding up to form gas from liquid state and achieve stability as the heat is supplied in greater amount. Boiling of liquid is causing the liquid molecules to speed up and get transformed into gaseous molecules.
If a solid forms when two ionic solutions are mixed together in a test tube, what does this indicate?
PLEASE HELP!!! EMERGENCY!
Which characteristic of four different dinosaur fossils makes a dinosaur most similar to the present-day birds?
A- Flexible Wrist
B- Flapping ability
C- Flight Feathers
D- Primitive Feathers
Calculate the atomic mass of bromine. The two isotopes of bromine have atomic masses and relative abundance of 78.2 (50.69%) AMU and 80.92 AMU (49.31%)
Why do scientists think there is an undiscovered carbon sink somewhere?
A sample composed only of atoms having the same atomic number is classified as
1. A compound
2. A solution
3. An element
4. An isomer
What are the major organic molecules?
A.
lipids, minerals, proteins, sulfuric acid
B.
carbohydrates, lipids, proteins, nucleic acids
C.
nutrients, nucleic acids, carbon, oils
D.
carbohydrates, nucleic acids, vitamins, minerals
Answer:
The answer is option B
Explanation:
The major organic molecules are considered as the building blocks for larger larger and more complex molecule that sustain life. These organic molecules are better known by the term "Biological Macromolecules".
Now, there are 4 categories of Biological macromolecules which are referred to as lipids, proteins, nucleic acids, and carbohydrates. The word organic is used to refer to the fact that his molecules contain the carbon element as is contained, indeed, by most molecules in any living entity.
Each macromolecule serves a vital function in a living cell. Proteins serve the point of quickening requisite chemical reactions and providing a structure to the cell. Lipids are involved in providing long term energy sources to the body by building up fat for example. Carbohydrates provide short-term energy as opposed to lipids for example in the form of cellulose. Nucleic acids are the conduits for genetic information and are contained in DNA fibers.
On the periodic table the number of protons in an atom of an element is indicated by its
What metric unit is used for measuring an eyelash?
How many atoms of ca are present in 8.6 mg? the atomic weight of ca is 40.08 amu?
Which of the following theories provides information concerning both molecular shape and bonding?
What 2 groups of rocks are formed from all 3 kinds of rocks?
In theory, all 3 can make
up each Sedimentary, Metamorphic, and Igneous rocks.
However, the progression of metamorphosis is really kind of
linear, and it is only possible to metamorphose a Metamorphic rock further, so
the answer to this question would be:
Igneous and Metamorphic rocks
Give an example of something that is observable but does not contain matter.
Explain.
The best example I can give that is observable but does not contain matter is:
sunlight or simply light
Light does not contain matter because it is a beam of energy or to be specific made up of packet of photons.
A bicyclist pedaling up a Hill. What type of energy potential or kinetic?
A bicyclist pedaling up a hill primarily increases their potential energy. Kinetic energy, the energy of motion, may decrease on an uphill climb but is still present. In such situations, energy conversion and loss due to friction are significant concepts.
Explanation:The type of energy involved when a bicyclist is pedaling up a hill is primarily potential energy. As the cyclist moves uphill, they are working against gravity, which stores energy in the form of gravitational potential energy. This type of energy is associated with the position or height of an object, and the higher the cyclist goes up the hill, the more potential energy is accumulated.
On the other hand, kinetic energy is the energy of motion, which the cyclist has while pedaling. When riding up a hill, the cyclist's kinetic energy may decrease as they slow down due to the incline and the gravitational force working against them. However, any movement still equates to some level of kinetic energy being present. To increase kinetic energy, the cyclist would have to pedal harder, which might indeed make them feel exhausted, as they would be exerting more force to overcome the hill's slope.
In physics problems like this, energy conversion is a key point of discussion. For example, when a car ascends a hill, its kinetic energy is converted into potential energy. And when a car or a bicycle descends a hill, the potential energy is converted back into kinetic energy.
It's also important to note that in many real-world situations, not all the kinetic energy is converted into potential energy. Some of the energy is inevitably lost as heat due to friction, such as tire friction which warms up the tires, or brake friction which heats up the brakes.
Learn more about Potential and Kinetic Energy here:https://brainly.com/question/15764612
#SPJ6
1 What do strong acids and strong bases have in common?
A They both partially dissociate, with reverse reactions occurring.
B They both dissociate completely, with little or no reverse reactions.
C They both remain intact when placed in water, with no dissociation taking place. D They both dissociate completely, with reverse reactions constantly taking place.
Answer: Option (B) is the correct answer.
Explanation:
Strong acids are the acids which completely dissociate in a solution of water. Similarly like strong acids, strong bases also dissociate completely into a solution of water.
For example, [tex]HCl \rightarrow H^{+} + Cl^{-}[/tex]
[tex]NaOH \rightarrow Na^{+} + OH^{-}[/tex]
Also, there is little or no reverse reactions when strong acids and bases completely dissociate into ions.
Thus, we can conclude that strong acids and strong bases have in common that they both dissociate completely, with little or no reverse reactions.
if a sample of neon (Ne) contains 1.01×10^22 atoms, what is it's mass
Final answer:
Assuming an average atomic mass of about 20.18 amu, the mass of the neon sample is approximately 0.338 grams.
Explanation:
To calculate the mass of a sample of neon (Ne) containing 1.01×1022 atoms, we use the concept of the mole, which is the base unit for the amount of substance in the International System of Units (SI). Firstly, we find the molar mass of neon, which is the mass of one mole of neon atoms, based on its isotopic composition. Neon has three naturally occurring isotopes: Ne-20, Ne-21, and Ne-22.
The average atomic mass of neon can be calculated from the abundances and masses of its isotopes. For example, neon might consist of 90.48% Ne-20 with a mass of 19.992 u, 0.27% Ne-21 with a mass of 20.994 u, and 9.25% Ne-22 with a mass of 21.991 u.
Using the average atomic mass of neon and Avogadro's number (6.022×1023 atoms/mol), we could find the molar mass and then calculate the mass of the neon sample as follows:
m = (number of atoms ÷ Avogadro's number) × molar mass of neon
Without the exact average atomic mass, we cannot complete this calculation. However, if we assume an average atomic mass around 20.18 amu (as is typical for neon), we can get an estimate:
m = (1.01×1022 atoms ÷ 6.022×1023 atoms/mol) × 20.18 g/mol
m ≈ 0.338 g
The mass of the neon sample is therefore approximately 0.338 grams.
What determines the horizontal arrangement of the periodic table?
If the theoretical yield of a reaction is 0.132 g and the actual yield is 0.131 g , what is the percent yield?
How many grams of acetic anhydride are needed to react with 4.65 g of salicylic acid?
Which is the most accurate description of ionic and covalent bonding?
The most accurate description of ionic and covalent bonding is that option C. Ionic bonds happen when valence electrons are transferred between ions. Whereas, in covalent electrons are shared.
Ionic bonding involves the complete transfer of one or more electrons from one atom to another.
This transfer creates ions, atoms with a net electric charge due to the loss or gain of one or more electrons. The ions are held together by strong electrostatic forces due to the attraction between positive and negative charges.In contrast, covalent bonding involves the sharing of electrons between two atoms.
The shared electrons create a stable balance of attractive and repulsive forces between atoms. Typically, covalent bonds form between nonmetals, where both atoms involved have similar electronegativities.The complete question is as follows:
Which is the most accurate description of ionic and covalent bonding?
A. Both bonds happen when valence electrons are shared between atoms.
B. Both bonds happen when valence electrons are transferred between ions.
C. Ionic bonds happen when valence electrons are transferred between ions.
D. Ionic bonds happen when valence electrons are shared between atoms.
A mixture of 0.220 moles co, 0.350 moles f2 and 0.640 moles he has a total pressure of 2.95 atm. what is the pressure of co?
The partial pressure of CO is 0.536 atom.
Further ExplanationDalton's Law of Partial Pressure states that the total pressure of a mixture of non-reacting gases is equal to the sum of the partial pressures of the individual gases. Mathematically, it can be represented as follows:
[tex]P_{total} \ = P_{1} + P_2 + P_3+...P_n[/tex]
If the total pressure is known as well as the number of moles of the gases in the mixture, the partial pressure of a component as can be calculated using the equation below:
[tex]P_x = P_{total} \times \frac{n_x}{n_total}[/tex]
where:
Pₓ is the partial pressure of gas X
P(total) = total pressure of the mixture
nₓ = number of moles of gas X
n(total) = total number of moles of gas
To solve the problem, first sort the given:
n(total) = 0.220 mol CO + 0.350 mol F₂ + 0.640 mol He = 1.21 molesn(CO) = 0.220 molP(total) = 2.95 atmThen we plug in the given values into the equation above:
[tex]P_{CO} = 2.95 \ atm \times \frac{0.220 mol CO}{1.21 \ mol}\\\\\boxed {\boxed {P_{CO} = 0.536 \ atm}}}[/tex]
Learn MoreIdeal Gas Law brainly.com/question/12936013Root Mean Square https://brainly.com/question/5980325Keywords: Dalton's Law of Partial Pressure, mole ratio
The pressure of CO is [tex]\boxed{{\text{0}}{\text{.536 atm}}}[/tex] .
Further explanation:
Dalton’s law:
According to this law, the total pressure of the gaseous mixture is the sum of partial pressure of each gas. The given mixture contains CO, [tex]{{\text{F}}_2}[/tex] and He. The expression to calculate partial pressure of CO is,
[tex]{P_{{\text{CO}}}} = {X_{{\text{CO}}}}\cdot {P_{{\text{total}}}}[/tex] ….. (1)
Here,
[tex]{P_{{\text{CO}}}}[/tex] is the partial pressure of CO.
[tex]{P_{{\text{total}}}}[/tex] is the total pressure of the mixture.
[tex]{X_{{\text{CO}}}}[/tex] is the mole fraction of CO.
The mole fraction of CO is calculated as follows:
[tex]{X_{{\text{CO}}}} = \frac{{{\text{Number of moles of CO}}}}{{{\text{Total number of moles}}}}[/tex] …… (2)
The formula to calculate total number of moles in the mixture is as follows:
[tex]{\text{Total number of moles}}={\text{Moles of}}\;{\text{CO}}+{\text{Moles of }}{{\text{F}}_2}+{\text{Moles}}\;{\text{of}}\;{\text{He}}[/tex] …… (3)
Substitute 0.220 mol for the moles of CO, 0.350 mol for the moles of [tex]{{\text{F}}_2}[/tex] and 0.640 mol for the moles of He in equation (3).
[tex]\begin{aligned}{\text{Total number of moles}}&={\text{0}}{\text{.220 mol}}+{\text{0}}{\text{.350 mol}}+{\text{0}}{\text{.640 mol}}\\&={\text{1}}{\text{.21 mol}}\\\end{aligned}[/tex]
Substitute 0.220 mol for the moles of CO and 1.21 mol for the total number of moles in equation (2).
[tex]\begin{aligned}{X_{{\text{CO}}}}&=\frac{{{\text{0}}{\text{.220 mol}}}}{{{\text{1}}{\text{.21 mol}}}}\\&= 0.1818\\\end{aligned}[/tex]
The value of [tex]{X_{{\text{CO}}}}[/tex] is 0.1818.
The value of [tex]{P_{{\text{total}}}}[/tex] is 2.95 atm.
Substitute these values in equation (1).
[tex]\begin{aligned}{P_{{\text{CO}}}}&=\left({0.1818}\right)\left({{\text{2}}{\text{.95 atm}}}\right)\\&=0.{\text{53631 atm}}\\&\approx0.{\text{536 atm}}\\\end{aligned}[/tex]
So the partial pressure of CO is 0.536 atm.
Learn more:
1. Calculate the moles of chlorine in 8 moles of carbon tetrachloride: https://brainly.com/question/3064603
2. Which law states the direct relationship between volume and absolute temperature at constant pressure? https://brainly.com/question/1403211
Answer details:
Grade: Middle School
Subject: Chemistry
Chapter: Gases and the kinetic-molecular theory
Keywords: moles, pressure, 0.220 mol, 0.640 mol, 0.0350 mol, 0.536 atm, 2.95 atm, He, CO, F2, moles of CO, moles of F2, moles of He, Dalton law and pressure of CO.
[03.04]Based on the electronegativity values shown in the table below, which element would you expect to form a nonpolar covalent compound when combined with chlorine (Cl)? Pauling scale periodic table showing Cl is 3.0; Cu is 1.9; F is 4.0; Li is 1.0; N is 3.0 Cu F Li N
Answer:
C. Nitrogen
Explanation:
Nonpolar covalent bonds are a type of bond that occurs when two atoms share a pair of electrons with each other. An example of a nonpolar covalent bond is the bond between two hydrogen atoms because they equally share the electrons.
A bond between 2 nonmetal atoms that have the same electronegativity and therefore have equal sharing of the bonding electron pair.
The element with the same electronegativity value aas Cl is the correct option.
This is Nitrogen.
Is lead a mixture or pure substance? and is Paint a mixture or pure substance?
Final answer:
Lead is a pure substance and an element, while paint is a mixture, typically a homogeneous mixture due to its uniform appearance.
Explanation:
Lead is a pure substance. Specifically, it is an element, which means it is composed of only one type of atom, making its composition constant and its properties consistent throughout. Its chemical symbol is Pb and can be found in various applications from batteries to radiation shielding. Paint, on the other hand, is a mixture because it contains several different substances combined together, such as pigments, solvents, and binders. Modern paints are usually homogeneous mixtures, as their components are evenly dispersed throughout, giving them a uniform appearance.
Name three elements that have been added to the periodic table since mendeleev's time