If an object has a mass of 20 grams and a volume of 40 cm3, what is its density in g/cm3?

Answers

Answer 1
20/40=0.5 g/cm^3 becuase, mass/volume=density.
Answer 2

If an object has a mass of 20 grams   its density in g/cm3 is [tex]0.5 g/cm^3[/tex]

What is density?

The measure of how closely a material is packed together is called its density. The mass per unit volume is how it is defined. Density Formula: ρ = m/V, where ρ is the density, m is the object's mass, and V is its volume. Density Symbol:

[tex]density = \frac{mass}{volume}[/tex]

[tex]Density = \frac{20}{40}[/tex]

=[tex]0.5 g/cm^3[/tex]

Learn more about  density at

https://brainly.com/question/26364788

#SPJ3


Related Questions

When a plant is entering the calvin cycle of photosythesis______.

light energy is required to proceed
light energy is not required to proceed
light energy cannot be present to proceed
light energy and stored energy is required to proceed

Answers

The Calvin cycle refers to the light-independent reactions in photosynthesis that take place in three key steps. Although the Calvin Cycle is not directly dependent on light, it is indirectly dependent on light since the necessary energy carriers (ATP and NADPH) are products of light-dependent reactions.

So basically it indirectly needs the light, even it's called light-independant reaction.

So the answer is the last one.

Plants do not need light energy during the Calvin Cycle of photosynthesis.

When a plant is entering the calvin cycle of photosynthesis, light energy is not required to proceed. The Calvin cycle, also known as the light-independent reactions, utilizes energy stored during the light-dependent reactions to convert carbon dioxide into glucose.

For thermometers to read temperatures correctly they must be

Answers

For thermometers to read temperatures correctly, they must be immersed in the substance being measured while reading the temperature. When they are taken out the substance, there is a possibility that the fluid inside would change its level due to the sudden change in the temperature. Thus, giving you an erroneous reading of the temperature. 

For the measurement of the temperatures correctly the thermometers Should Fully dipped into Fluids  So that it is dipped into the Fluids and give you Correct reading.

Further Explanation:

Explanation:

First of all we should check that the liquid in the thermometer should be at below the room temperature. If it is not below this temperature please bring its temperature below the room temperature by shaking the thermometer.

When the temperature below the room Temperature:

When the Temperature of the thermometer is below the room temperature then dipped the thermometer into the fluid of which you have to checked the temperature. Make sure that the Thermometer dipped into the fluid properly.

Difficulties:

If thermometer is not dipped properly in the fluid then the temperature of fluid should not be measured correctly an there should be an error in the measurement.

When you take off the thermometer from the fluid then the Liquid in the thermometer can be leveled down because of sudden change of Temperature of the temperature of fluid to the room Temperature.

Answer Details:

Subject: Physics

Level: High School.

Key Words:

Explanation:

When the temperature below the room Temperature:

Difficulties:

For further Evaluation:

https://brainly.com/question/6362387

https://brainly.com/question/12938965

https://brainly.com/question/1759515

https://brainly.com/question/4819550

thanks

A 1.0-kg block is pushed up a rough 22° inclined plane by a force of 7.0 n acting parallel to the incline. the acceleration of the block is 1.4 m/s2 up the incline. determine the magnitude of the force of friction acting on the block.

Answers

The answer is 1.9 N done with the following equation:
7-mgSinG-f=ma
f=7-mgSinG-ma
=1.92N

It's easiest if you draw out the diagram of the problem first and fill in all the known and missing parts to come up with the equation that you will need to use to solve the problem. In this case we know the angle, weight, force, and acceleration and must find the magnitude acting upon the block.

Therefore, the force that the sun exerts on earth is ____ that earth exerts on the sun.

Answers

The gravitational force between earth and the sun

F = (G*Me*Ms)/Des

So exerting force will be same on each other.

A person is pushing against a couch with a force of 50 n. what is the force of the couch against the man if the couch does not move?

Answers

Newton's third law of motion states that for every applied force, there is an equal and opposite reaction force.

Therefore if a person pushes against a couch with a force of 50 N, the reactionary force from the couch against the man will be 50 N.

Because these forces are equal and opposite, both  the couch and the person will remain in static equilibrium.

Your swimming pool is 8 ft long, 6 ft wide and 1.5 ft deep. how many gallons of water will be needed to fill it?

Answers

538 gallons of water will be needed.

What questions should be considered when evaluating the reliability of a website?

Answers

How accurate a website is?
Who is the author?
Is the website info being bias?
When was the website written and is it recent?
Does the web have and mistakes?
Is there a way to contact?
Is there bibliography given?
Is there information given on the author?
Is the author a reliable? 

Explanation:

Is the site from an established institution or reputed organization?

Who is providing the information?

What is the author's credential?

Is the site bias?

Is the site trying to influence you?

Is the author's contact information provided?

When the site was last updated?

When the site was first created?

What is the major domain of the web address?

The “Compton effect” showed

A. that light undergoes interference
B. how an experiment can mislead
C. the wave nature of light
D. the particle nature of light

Answers

The Compton effect was discovered by Arthur Holly Compton in 1923. His experiment allowed him to observe that when the high-energy light or photons collide with a barrier or target, the scattering of loosely bound electrons occur. This observation favored that light behaves as a particle rather than a wave. Hence, the answer is D.

One of the ways that simple machines make work easier is that they _____.

A.multiply the force
B.use less output of energy
C.decrease the weight of the resistance
D.multiply work

Answers

They multiply the force, with machines doing one job, they can have human workers doing that job also or working others to, thus multiplying the work done. Larger working force basically. Answer A.

Answer:

A. Multiply the force

Explanation:

Simple machines are used to make our work easier. They either change the direction of force or multiply the force or both. Simple machines are lever, wedge, pulley, screw etc.

Example of how a simple machine multiplies force:

In a lever, effort is put at a longer end which is able to lift a heavier load at the short distance.

Consider a sample of gas in a container on a comfortable spring day in chicago, il. the celsius temperature suddenly doubles, and you transfer the gas to a container with twice the volume of the first container. if the original pressure was 12 atm, what is a good estimate for the new pressure?

Answers

To solve this problem, we must first assume that the gas acts like an ideal gas so that we can use the ideal gas equation:

 P V = n R T

where P is the pressure, V is the volume, n is the number of moles, R is the universal gas constant and T is the absolute temperature

 

Assuming that the number of moles is constant, then we can write all the variables in the left side:

P V / T = k            where k is a constant (n times R)

 

Equating two conditions or two states:

P1 V1 / T1 = P2 V2 / T2

We are given that V2 = 2 V1 therefore

P1 V1 T2 = P2 (2V1) T1

P1 T2 = 2 P2 T1

 

Additionally we are given that the temperature in Celsius is doubled, however in the formula we use the absolute temperature in Kelvin, therefore:

T1 (K) = T1 + 273.15

T2 (K) = 2T1 + 273.15

and P1 = 12 atm

 

Substituting:

12 (2T1 + 273.15)  = 2 P2 (T1 + 273.15)

P2 = 6 (2T1 + 273.15) / (T1 + 273.15)

 

Assuming that a nice spring day in Chicago has a temperature of 15 Celsius, therefore:

P2 = 6 (2*15 + 273.15) / (15 + 273.15)

P2 = 6.312 atm

Final answer:

When the Celsius temperature of a gas in a container doubles, and the gas is transferred to a new container with twice the original volume, the new pressure of the system can be computed using the combined gas law.

Explanation:

This Physics question involves understanding how gas laws work. Given the scenario where the Celsius temperature doubles and the gas is transferred to a container functioning at twice the original volume, several gas laws come into play such as Boyle's law and Charles's law, which relate pressure, volume, and temperature.

Let's look at Charles's law first. It states that volume is proportional to the absolute temperature, assuming constant pressure. From this law, we know that the gas's volume will increase when the temperature doubles. Meanwhile, according to Boyle's law, at constant temperature, the pressure and volume of a gas are inversely proportional. In other words, if you double the volume of the container, the pressure will be halved.

The new pressure will be derived by applying the combined gas law which factors the changes in both temperature and volume. Using Combined Gas law which is (P1V1)/T1 = (P2V2)/T2 where the pressures are in atmospheres, volumes in liters, and temperature in Kelvin, you can solve the new pressure in the system.

Learn more about Gas Laws here:

https://brainly.com/question/12669509

#SPJ3

When was last total solar eclipse in minnesota?

Answers

I think the last total solar eclipse in Minnesota was on June 30, 1954. The eclipse began in United States over Minnesota, South Dakota, Wisconsin and Nebraska and ended in India. A solar eclipse occurs when the Moon would pass between the Sun and the Earth thus blocking the Sun from the Earth. It can happen as a whole or as partial. A total would happen when the apparent diameter of the Moon is larger than that of the Sun, blocking all of the sunlight directed to the Earth resulting to darkness during the day. A total solar eclipse would happen two to three times in a year. 
Final answer:

The last total solar eclipse visible in Minnesota was on August 21, 2017 and was witnessed by millions of people across the United States.

Explanation:

The last total solar eclipse visible in Minnesota occurred on August 21, 2017. This eclipse was viewable across a large swath of the continental United States. Figure 4.25 shows the path of the moon's shadow as it traversed the United States, covering about 3000 miles in the process. This astronomical event was witnessed by millions of people, making it an extraordinary spectacle.

Learn more about total solar eclipse here:

https://brainly.com/question/4702388

#SPJ12

Uchida’s optical imaging research showed that as the length of the carbon chain increases, the area of activation is _____.
a. ​randomly distributed across the glomeruli
b. ​located more to the right
c. ​more centrally located
d. ​located more to the left

Answers

the area of activation is: located more to the left
This shows that a difference group of chemicals will activate different location on the olfactory bulb. The same pattern always occurs during large chain length that shows it's located also to the left

What is the energy equivalent of 5.0 kg of mass? be sure to show all work to support your answer?

Answers

 The energy equivalent of 5.0 kg mass would be 4.5x10^17.

Night vision glasses detect energy given off by objects as (2 points)
Select one:
a. ultraviolet waves.
b. radio waves.
c. microwaves.
d. infrared waves.

Answers

the answer here would be infrared waves. Hot objects and humans give off heat in the form of infrared light, thermal imaging technology in the goggles enable them to catch this light emitted by these objects 

In order to qualify for the finals in a racing event, a race car must achieve an average speed of 223 km/h on a track with a total length of 1350 m. if a particular car covers the first half of the track at an average speed of 215 km/h, what minimum average speed must it have in the second half of the event in order to qualify? answer in units of km/h.

Answers

Total track distance is
d = 1350 m = 1.35 km
Half of the track length is  1.35/2 = 0.675 km

The average speed should be 223 km/h. Therefore the total travel time is
t = (1.35 km)/(223 km/h)
  = 6.054 x 10⁻³ h

Half of the track length is traveled at an average speed of 215 km/h. The time taken is
t₁ = (0.675 km)/(215 km/h)
   = 3.14 x 10⁻³ h

In order to satisfy the average speed requirement, the second half of the track should take no more than
t₂ = t - t₁
   = (6.054 - 3.14) x 10⁻³
   = 2.914 x 10⁻³ h

The minimum average speed required to satisfy this time is
v = (0.675 km)/(2.914 x 10⁻³ h)
   = 231.64 km/h

Answer:
The minimum average speed required is 232 km/h (nearest whole number)


A compound microscope uses A. a convex mirror and a lens to enlarge an image. B. a mirror that flips up to let light through the lens. C. two convex lenses to magnify a small object. D. a mirror to reflect an image of a small object.

Answers

Answer:

Option (c)

Explanation:

A compound microscope is an optical instruments which can use to see the highly magnified image of very tiny objects.

It consists of two convex lenses.

1. Objective lens: It is a convex lens of short focal length and of short aperture.

It is located at the object side.

2. Eyepiece: It is a convex lens of comparatively large focal length and of large aperture.

It is located at the side from where we can see the image of the object.

When a cup is placed on a table, which force prevents the cup from falling to the ground? gravitational force normal force resistance force tension force

Answers

I'd say normal force here. Cup presses down on table, and table presses back up on cup sort of thing.

Is it an inward force or an outward force that is exerted on the clothes during the spin cycle of an automatic washing machine? what about the direction of the force on the water?

Answers

an outward force is exerted

The national high magnetic field laboratory holds the world record for creating the strongest magnetic field. for brief periods of time, their largest multi-shot pulsed magnet can produce magnetic fields in excess of 85 t. to see if such a strong magnetic field could pose health risks for nearby workers, calculate the maximum acceleration the field could produce for na ions (of mass 3.8 × 10-26 kg) in blood traveling through the aorta. the speed of blood is highly variable, but 45 cm/s is reasonable in the aorta

Answers

Newton’s 2nd law states that Force is equal to the product of mass (m) and acceleration (a):

F = m a                                  ---> 1

While in magnetic forces, force can also be expressed as:

F = q v B                               ---> 2

where,

q = total charge

v = velocity = 45 cm / s = 0.45 m / s

B = the magnetic field = 85 T

First we solve for the total charge, q:

q = 3.8 × 10^-23 g (1 mol / 23 g) (6.022 × 10^23 electrons / mol) (1.602 × 10^-19 C / electron)

q = 1.594 × 10^-19 C

 

We equate equations 1 and 2 then solve for acceleration a:

m a = q v B

a = q v B / m

a = [1.594 × 10^-19 C * 0.45 m / s * 85 T] / 3.8 × 10-26 kg

a = 160,437,862.2 m/s^2

 

Therefore the maximum acceleration of Na ions is about 160 × 10^6 m/s^2.

Answer:

[tex]a = 1.61 \times 10^8 m/s^2[/tex]

Explanation:

Force due to magnetic field on the position of Na+ ions is given as

[tex]F = qvB[/tex]

here we know that

[tex]q = 1.6 \times 10^{-19} C[/tex]

[tex]v = 45 cm/s[/tex]

[tex]B = 85 T[/tex]

now the force will be given as

[tex]F = (1.6 \times 10^{-19})(0.45)(85)[/tex]

[tex]F = 6.12 \times 10^{-18} N[/tex]

now we know that acceleration is given as

[tex]a = \frac{F}{m}[/tex]

[tex]a = \frac{6.12 \times 10^{-18}}{3.8 \times 10^{-26}}[/tex]

[tex]a = 1.61 \times 10^8 m/s^2[/tex]

Debbie places two shopping carts in a cart corral. She pushes the first cart, which then pushes a second cart. What force is being exerted? Debbie exerts force on the first shopping cart. The first cart exerts force on the second cart.

Answers

Yes, debbie pushes on the 1st cart, but the 1st cart also pushes back on debbie with equal and opposite force, same with the 2nd cart on the 1st cart. Debbie and the 2nd cart don't directly interact, but there is a force reaction pair between the two carts and between debbie and the first cart. We also have implied normal forces that cancel with weight forces and potentially friction from debbie's shoes on the ground when she pushes and friction on the wheels of the carts. This might be overkill, but the question seems to want you to focus on Newton's 3rd Law, which is that every action has an equal and opposite reaction, those force reaction pairs I talked about. When debbie pushes on the cart, the cart pushes back on her with equal and opposite force.

The forces acting on a moving go-cart include friction, normal force, and the force applied by individuals pushing the cart.

As the go-cart moves along, several forces act on it:

Force of friction: This force opposes the motion of the cart and is caused by the interaction between the wheels and the ground.

Normal force: This force acts perpendicular to the surface and supports the weight of the cart.

The force applied by Debbie and her friend: These forces cause the cart to accelerate and move.

Decay of radioactive isotopes, differentiation of earths iron core, gravity-driven compression, and meteoric bombardment all caused early earth to ________.

Answers

Decay of radioactive isotopes, differentiation of earths iron core, gravity-driven compression, and meteoric bombardment all caused early earth to be much hotter than at present. 
The Earth was formed roughly 4.5 billion years ago. the atmosphere was predominantly consisted of methane (CH4) and ammonia (NH3). These greenhouse gases and their radioative forcing kept the Earth’s atmosphere warm.

Final answer:

The decay of radioactive isotopes, differentiation of Earth's iron core, gravity-driven compression, and meteoric bombardment all triggered the early Earth to heat up and differentiate into distinct layers, creating the conditions for the formation of the iron-nickel core, mantle, crust, and the atmosphere.

Explanation:

The question addresses the processes that have shaped the early Earth. Particularly, it asks how the decay of radioactive isotopes, the differentiation of Earth's iron core, gravity-driven compression, and meteoric bombardment all contributed to the early state of our planet. The correct term to fill in the blank is that all these processes caused early Earth to heat up and differentiate into layers.

Due to radioactive decay and gravitational compression, the Earth experienced significant heating, resulting in the melting of the planet's interior. This allowed molten metal to sink towards the center to form the dense iron-nickel core, while lighter silicate materials floated to the surface, eventually forming the Earth's crust and mantle. Meteoric bombardment and collisions with other celestial bodies, including a massive impact believed to have led to the formation of the Moon, further contributed to the heating and differentiation of the Earth. Simultaneously, these processes have led to the creation of Earth's atmosphere, primarily through volcanic degassing and contributions from comets and meteorites.

Calculate the period (T) of uniform circular motion if the velocity is 40.0 m/s and centripetal acceleration is 20.0 m/s2.

Answers

T is the time for a whole round.

centripetal acceleration = V^2/R,

20 = 40^2 / R, find R = 40^2/20 = 40*40/20 = 80 m, right?

Now, one round is L = 2*pi*R = 2*pi*80 = 160*pi

And T = L/v (distance/speed) = 160*pi/40 = 4*pi seconds, or ~ 12.57 s

The period (T) of uniform circular motion if the velocity is [tex]40.0 m/s[/tex] and centripetal acceleration is [tex]20.0 m/s^2[/tex] is approximately 8.9 seconds.

Finding the Period (T) in Uniform Circular Motion

To calculate the period (T) of an object in uniform circular motion, we need to relate the given velocity and centripetal acceleration to the formula involving period and radius.

First, let's use the centripetal acceleration formula:

[tex]|a| = |v|^2 / r[/tex]

We know:

Velocity (v) = 40.0 m/sCentripetal acceleration [tex](a) = 20.0 m/s^2[/tex]

By rearranging the formula to solve for the radius (r):

[tex]r = v^2 / a[/tex]

Now, substitute the given values:

[tex]r = (40.0 m/s)^2 / 20.0 m/s^2 = 1600 / 20 = 80 m[/tex]

Next, we use the relationship between the period and radius:

[tex]a = 4\pi^2r / T^2[/tex]

Rearranging to solve for T:

[tex]T^2 = 4\pi^2r / a[/tex]

Substitute the known values:

[tex]T^2 = 4\pi^2 * 80 / 20\\T^2 = (4 \times 9.87 \times 80) / 20 = 1583 / 20 = 79.16[/tex]

Therefore:

[tex]T = \sqrt{79.16} = 8.9 s[/tex]

How many series-connected cells does a typical 12 V storage battery contain?

Answers

does anyone know the answer?

Which statement best describes scientific theories? Select one: A. Scientific theories are what laws are called before they are proven. B. Scientific theories attempt to explain why natural events occur. C. Scientific theories are based on opinions. D. Scientific theories describe natural events.

Answers

C. Scientific theories are based on opinions. 

Laws are not based on opinions. They are proven.
I think A fits the best, coz a theory is capable of producing experimental predictions. and are based on postulates.

When approaching a hillcrest where you can not see the other side..?

Answers

When approaching a hillcrest where you cannot see the other side, approach the crest in the rightmost lane.
It is important to be able to see on both sides, so as to avoid possible collisions with other drivers. So, it is for the best to approach this crest using the rightmost lane, in order to drive safely.

Before passing another vehicle, the first major step is to ________.

Answers

Answer:Explained

Explanation:

Before Passing the another vehicle

make sure it is safe to do it.For instance a single lane road make sure the lane is clear for sufficient distance.Make sure to honk before passing another vehicleMake sure no other vehicle is overtaking you by checking in Rear view mirror.

Before passing another vehicle, the first major step is to ensure proper signaling and check blind spots. Signaling is crucial as it communicates your intention to the drivers behind and ahead of you.

Activating the turn signal in the direction you plan to pass alerts others of your intentions. Checking blind spots is equally important to ensure there are no vehicles present in the adjacent lanes that may be hidden from your mirrors.

This step involves a quick glance over your shoulder to verify that the lane is clear and safe for passing. Only after completing these steps should you proceed with passing the vehicle.

To know more about communicates :

https://brainly.com/question/31309145

#SPJ6.

An interstate highway loop meets the primary route at both ends. the first digit of its route number is always

Answers

The first number indicates that the highway is an  East - West or South -North highway. East - West always have an even number and increasing from East going to West while odd numbers are designated to South - North highways with the same incremental pattern. 

The first digit of an interstate highway loop route number that meets the primary route at both ends is always an odd number, indicating it is a spur or a loop off of the main interstate route.

The question relates to the numbering system of interstate highways in the United States. If an interstate highway is a loop that reconnects with the primary interstate route, the first digit of its route number will always be an odd number.

Specifically, these loops are usually three-digit numbers with the last two digits matching the main interstate and the first digit signifying it is a loop or spur.

For example, Interstate 495 would be a loop off of Interstate 95.

Which chemical compounds absorb large amounts of the sun's energy in the atmosphere? Select one: a. Nitrogen compounds, water vapor, and carbon compounds b. Carbon dioxide, water vapor, and dust c. Methane, nitrogen compounds, and dust d. Nitrogen compounds, carbon compounds, and water vapor

Answers

The Earth's atmosphere is a mixture of gases held in a layer surrounding the Earth. The sunlight that does reach the ground warms the Earth. The Earth's atmosphere is composed primarily of nitrogen and oxygen, as well as some argon. From the given options, nitrogen compounds, water vapor and carbon compounds absorb large amounts of the Sun's energy in the atmosphere. (A)
Final answer:

Chemical compounds that absorb significant amounts of the sun's energy in the atmosphere are greenhouse gases such as carbon dioxide, methane, and water vapor, along with dust particles.

Explanation:

The chemical compounds that absorb large amounts of the sun's energy in the Earth's atmosphere are primarily greenhouse gases. These include carbon dioxide, methane, and water vapor. These substances have the ability to absorb and emit radiation within the thermal infrared range, which in turn warms the atmosphere. Although nitrogen and oxygen are the most abundant gases in the atmosphere, they do not absorb significant amounts of the sun's energy compared to greenhouse gases. Dust particles in the atmosphere can also absorb some solar energy, but not as significantly as greenhouse gases do. Therefore, the correct answer to the given options would be: b. Carbon dioxide, water vapor, and dust.

Why is a steam burn more damaging than a burn from boiling water at the same temperature?

Answers

The phase change (from gas to liquid) that the steam undergoes right when it touches your skin releases a lot of energy right onto your skin so it burns a ton. The boiling water would just burn you until it reaches the same temperature as your skin.
Final answer:

A steam burn is more damaging than a burn from boiling water at the same temperature due to the release of latent heat energy when steam comes into contact with the skin.

Explanation:

A steam burn is more damaging than a burn from boiling water at the same temperature because steam carries more energy due to its phase change from water to steam. When water is heated to boiling point, it absorbs a significant amount of heat energy to change from liquid to gas. When this steam comes into contact with the skin, it releases the latent heat, causing a more severe burn.

Evaporation is ________. sometimes a cooling process always a cooling process always a warming process sometimes a warming process two of the above are correct.

Answers

Evaporation is always a cooling process. For evaporation to occur, energy is needed by the liquid molecules that are changing phase into gas. This energy is taken from the surroundings in the form of heat energy. So when evaporation occurs, the temperature of the surroundings will decrease, making evaporation a cooling process.
Final answer:

Evaporation is always a cooling process, as it involves the removal of higher energy molecules from the liquid, which in turn lowers the temperature of the remaining liquid.

Explanation:

Evaporation is always a cooling process. This occurs because, during evaporation, liquid molecules with higher kinetic energy escape into the gas phase, thereby lowering the average kinetic energy of the remaining liquid molecules, which results in a decrease in temperature. An everyday example of evaporative cooling can be observed when water on the skin evaporates, leaving the skin feeling cooler. On the other hand, condensation, which is the reverse of evaporation, is a warming process as it releases heat equal to the heat of vaporization.

Other Questions
In Federalist no. 10, Madison suggests the way to prevent factions from killing off popular government is to The name given to the fraction of deposits that a bank is legally required to hold in its vault, or as deposits at the fed, is __________. The nurse is collecting data from a client recently diagnosed with paranoid schizophrenia. which information best supports that the client is at risk for harming another individual? Erica bought 3 1/2 yards of Frederick if she uses 2/3 of the fabric to make a curtain how much will she have left Suppose A and B are independent events if P(A) = 0.4 And P(B) = 0.1, what is P(A'uB)? APEX How did the early colonists survive in their new land during the initial years?1. They migrated to the Caribbean when conditions became too harsh to grow food.2. They relied on England, which supplied food and all other resources for the first few years.3. They learned how to grow food and survive from the American Indians.4. They created large agricultural communities to grow food as soon as they arrived. Paintings reflecting the beliefs of ____, such as mu-qi's six persimmons from 1269, emphasize the importance of simplicity and meditation in life. zen buddhism How did the United States recruit and train its troops in a short period of time? 2.Richmond Appliance repairs washing machines. The revenue that the company earns is given by the function R(h) = 20 + 45h dollars for every h hours spent repairing washing machines. The companys overhead cost is given by the function C(h) = 5h2 30 dollars. For what number of hours does the company break even? Show your work. Why did the British introduce the tank in World War I?They hoped to protect communications and keep troops mobile.They hoped to help support their strategy of ambushes and raids in the west.They hoped to break the stalemate by successfully conquering No Mans Land.They hoped to sneak into enemy camps and get behind enemy lines. A 34 - m tall building casts a shadow. The distance from the top of the building to the tip of the shadow is 36 m . Find the length of the shadow. If necessary, round your answer to the nearest tenth. Two cars, one in front of the other, are traveling down the highway at 25 m/s. the car behind sounds its horn, which has a frequency of 500 hz. what is the frequency heard by the driver of the lead car? (vsound = 340 m/s) If an ovum is not fertilized _____ production decreases and the ____ is shed Find the zeros of the function. f(x) = 4x3 - 12x2 - 40x Why would a student who wants to be a doctor study chemistry? an ellipse has a center at the origin, a vertex along the major axis at (13, 0), and a focus at (12, 0). What is the equation of the ellipse? Mr. jones is angry at his private attorney. he keeps him on retainer for the very reason of potential criminal action against him and his meth business. mr. jones has now been placed with a public defender. one major difference between a public and private attorney is How was Rockefeller able to become so successful in the oil business? A. He was the only one to use railroads for shipping his oil. B. He set about forcing competitors to sell out to him. C. Since he had so much money, he would underbid other companies. D. He knew where all the best oil fields could be found. Smaller bags of items are generally priced lower per unit than larger bags.A. TRUEB. FALSEPLZZZ HURY The person responsible for establishing psychology as an independent discipline with its own subject matter is Steam Workshop Downloader