Work in physics is defined as force times distance (there is also an angle but that doesn’t seem applicable here). In this case:
W = F•d
W = (20 N)(10 m)
W = 200 Nm or 200 joules
200 joules of work was done on the bag of dog food.
Hope this helps!
Answer:
i have seen people put its 2joules, well it not 2, its 200joules bc their asking how much work was done so u need to multiply not dived
Explanation:
Which statement best defines syntax? A. It is the study of words. B. It is the study of the organization of words into sentences, phrases, and clauses. C. It is the study of a long stretch of a language. D. It is the study of sentences.
b would be the best answer
Answer: B. It is the study of the organization of words into sentences, phrases, and clauses.
Explanation:
A syntax in linguistics can be define as the set of rules, processes, principles that is used to frame and govern the sentences in a particular language. It gives the knowledge of the order, arrangement and framing of the words, punctuation in phrases, clauses and sentences, so as to make them meaningful and understandable.
A negative charge is moving across a room from south to north. A magnetic field runs from east to west. In what direction is the magnetic force on the moving negative charge?
A.
toward the east
B.
toward the west
C.
toward the floor
D.
toward the ceiling
Answer:
plato answer is c?
Explanation:
How does a magnet affect another magnet, something made of iron or a similar metal, and moving charges?
It exerts an electric force.
It exerts a magnetic force.
It exerts a polar force.
It exerts a force proportional to the magnet’s charge.
How does a magnet affect another magnet, something made of iron or a similar metal, and moving charges?
It exerts a magnetic force.
~Hope this answers your question!~
Answer: The correct answer is "it exerts a magnetic force".
Explanation:
Magnet: It has magnetic properties. It has two poles: south pole and north pole.
Magnets attract the iron or other metal. It is due to the influence of their magnetic field. The atoms of the iron gets align their electrons. In this way, the iron gets magnetized.
There is a magnetic force of attraction between the opposite poles. There is a magnetic force of repulsion between the same poles.
The current carrying conductor produces the magnetic field around it.
If the compass needle is placed near the current carrying conductor then it will show the deflection. It shows the presence of the magnetic field around the current carrying conductor. It exerts a magnetic force.
Therefore, the option "It exerts a magnetic force" is a correct.
Which is a tool used by scientists to determine the composition of objects?
A. a hologram
B. a spectrometer
C. a wave front
D. a prism
Answer:
Its B
Explanation:
edg2020
Spectrometer is the tool used by scientists to determine the composition of objects. So, option B is correct.
What is meant by spectroscopy ?Spectroscopy is defined as the technique of studying the structure and properties of matter by using radiations.
Here,
The method of spectroscopy is that it analyses matter by using radiations. In this process, the radiations emitted and absorbed by the particles are analyzed. The instrument used is called spectrometer. Thus the absorption spectra and emission spectra of the particle are obtained. From this, the interaction of the particle with the materials in form of energy can be studied. Spectroscopy can be called as the measurement of the matter-energy interactions by means of radiation and their wavelengths as the function of energy. Spectroscopy and its applications have been widely used in many of the theories in physics. Quantum mechanics and relativity theories and many others has been developing their theories by the major applications of spectroscopy. Study of material particles are widely done by spectroscopy
Hence,
Spectrometer is the tool used by scientists to determine the composition of objects.
To learn more about spectroscopy, click:
https://brainly.com/question/5402430
#SPJ7
if a 6kg ball is hanging by a rope from the ceiling at rest, what is the tension of the rope?
Answer:
58.8 N
Explanation:
Since the ball is hanging at rest, the net force on the ball must be zero.
There are only two forces acting on the rope:
- Its weight, downward, given by W = mg, where m = 6 kg is the mass of the ball and g=9.8 m/s^2 is the acceleration due to gravity
- the tension in the rope, T, upward
Therefore, the equation for the forces is:
[tex]T-W=0[/tex]
And solving for T, we find:
[tex]T=W=mg=(6 kg)(9.8 m/s^2)=58.8 N[/tex]
How does a star’s life begin?
THE LIFE OF A STAR
The star starts as a NEBULA basically like this really pretty universal gas. The gas then starts to attract to each other and sticks around together. In the universe the temperature may vary. When the temperatures are extremely high there is a REACTION aka FUSION that takes place.
Then THERE IS A STARR
Help...??
Which describes the behavior of light when traveling from a medium through which it travels more slowly, such as water to a medium through which it travels faster , such as air?
a. light travels perpendicular to the normal.
b. light bends away from the normal.
c. light bends towards the normal.
d. light travels in a straight line.
"If a ray of light passes across the boundary from a material in which it travels slowly into a material in which travels faster, then the light ray will bend away from the normal line."
I hope this helps, it bends away from the normal
What type of energy is related to the kinetic energy of all the particles of a sample of matter?
Particles are objects in motion, so they have kinetic energy. The faster a particle moves, the more kinetic energy it has. Kinetic energy is related to heat. I hope this helps!
The handle of a metal spoon warms up when it is placed in a hot bowl of soup because of
radiation.
conduction.
convection.
insulation.
conduction because energy is being conducted throughout the spoon
The handle of a metal spoon warms up when it is placed in a hot bowl of soup because of conduction.
Explain the process of conduction?Heat is transferred from the hot water to the cold water until both samples have the same temperature. The transfer of heat from the hot water through the metal can to the cold water is referred to as conduction. Conduction involves the transfer of heat from one location to another.When a point on an object is heated, the molecules there vibrate more strongly. Conduction is the transfer of these vibrations within the material.By the process of Conduction the handle of a metal spoon become warm.
To learn more about the process of Conduction refer:https://brainly.com/question/21849832
#SPJ2
the amount of force needed to keep a 0.2 kg hockey puck moving at a constant speed of 8m/s on friction less ice is ____ N
If there is really no friction and no air resistance, then NO force is needed to keep an object moving in a straight line at constant speed. Check out Newton's first law of motion again.
Answer:
F = 0 N
Explanation:
Given that,
Mass of the hockey puck, m = 0.2 kg
Speed of hockey puck, v = 8 m/s
As the speed is constant. So, there is no change in the velocity. As a result, the acceleration of the hockey puck is 0. Force is given by :
[tex]F=ma[/tex]
Since, a = 0
F = 0
So, the amount of force needed to keep a 0.2 kg hockey puck moving at a constant speed of 8 m/s on friction less ice is zero newton.
a 15 year old broke into a store with his buddies one of the older boys shot and killed the store owner what the text says about the criminal justice system the 15 year old
Approximately how many years has the sun been active? 3.5 billion 4.5 billion 5.5 billion 6.5 billion
5.5 billion
Hope this helps :)
According to science its 5 billion years
And This Isn't in your option so we can say 4.5 billion years.
A car weighs 1323 N. What is it’s mass?
The weight is the product of the mass [tex]m[/tex] of the body and the gravity acceleration [tex]g[/tex]:
[tex]W=m.g[/tex] (1)
Where [tex]g[/tex] is the acceleration due gravity with a value of [tex]9.8\frac{m}{s^2}[/tex] for the Earth
If we want to find the mass, we have to find [tex]m[/tex] in equation (1):
[tex]m=\frac{W}{g}[/tex] (2)
[tex]m=\frac{1323N}{9.8\frac{m}{s^2}}[/tex] (3)
Finally:
[tex]m=135kg[/tex]
Plants make their own food using energy from the Sun, carbon dioxide from the air, and
A force of 2 newtons is required to stretch a spring 4 cm. The amount of force required to stretch the same spring 8 cm is _____ newton(s)
a) 1
b) 2
c) 4
d) 8
Answer will be c for this one!
light is an example of a mechanical wave in nature? true or false
Answer:
The answer is False.
Explanation:
The Light is a form of energy ( known as luminous energy ) that can be perceived by the human eye, therefore it allows us to see what surrounds us. Light is an electromagnetic radiation that spreads in the form of spherical waves in any space, consequently, it is not a mechanical wave.
Answer:
The answer is False.
When using the magnification equation, a value greater than 1 as the solution for M indicates that the image is
larger than the object.
smaller than the object.
real.
virtual.
Answer:
Larger than the object
Explanation:
The magnification of a lens/mirror is given by the equation:
[tex]M=-\frac{h_i}{h_o}[/tex]
where
[tex]h_i[/tex] is the size of the image
[tex]h_o[/tex] is the size of the object
from the formula, we see that if M is greater than 1, it means that [tex]|h_i|>|h_o|[/tex]
and so, it means that the image is larger than the object.
The negative sign simply tells if the image is upright or inverted: when M is positive, the image is upright, when M is negative, the image is inverted.
Answer:
Larger than the object
Explanation:
The efficiency of a device such as a lamp can be calculated using this equation:
efficiency = (useful energy transferred ÷ energy supplied) × 100
Using the formula, calculate the efficiency of the lamp shown in the diagram above.
A) 7%
B) 25%
C) 70%
D) 75%
Answer: C- 70%
Explanation:
Useful energy = 250J-75J = 175J
175J/250J*100= 70%
Efficiency should always be less than 1 or below 100% because every device wastes some energy. You committed a calculating error if you receive a result that is more than 1 or 100% Thus option C is correct.
What efficiency of a device as a lamp can be calculated?Efficiency refers to how effectively a technology converts energy input into usable energy output. The percentage of energy delivered in beneficial ways determines a device's efficiency. Either a decimal or a percentage can be used to represent the efficiency.
Any efficiency can be determined by dividing the energy input by the energy output by 100%. This equation serves as a general representation of energy in the form of heat or power.
Therefore, Useful energy = 250J-75J = 175J 175J/250J×100= 70%
Learn more about efficiency here:
https://brainly.com/question/28008092
#SPJ3
which events cause ferromagnetic materials to magnetize and which events cause them to demagnetize. sort events into the correct category.
ANSWERS BELOW!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Magnetize;
1) place in magnetic field
2) pass electricity through
3) rub on permanent magnet
Demagnetize;
1) heat
2)strike
3)place in opposite polarity
Magnetize;
2 3 1
Demagnetize;
3 1 2
magnetize :
place in magnetic field,
rub on permanent magnet,
pass electricity through
demagnetize :
place on opposite polarity,
strike,
heat
During which month will Europe and Africa each have equal amounts of sunlight?
The answer is March because they are have an equal amount of sunlight in the vernal equinox which is during the month March.
Answer: March and September
Explanation: Equinox is a term that is related to the position of the Earth in relation to the Sun, and this is a short period of time when the plane of the equator passes through the center of the Sun. This happens twice a year and there are spring and autumn equinoxes, more specifically around March 20 and September 23, and then, thanks to the position of the Earth's equator in relation to the center of the Sun, the amount of sunlight is the same in Africa and Europe. So in March and in September.
Why higher voltage means thinner cables and why it is then cheaper?
The higher the voltage, the lower the current. ... The lower current that accompanies high voltage transmission reduces resistance in the conductors as electricity flows along the cables. This means that thin, light-weight wires can be used in long-distance transmission.
a screwdriver with a 1-cm shaft and a 4-cm handle is used to tighten a screw calculate the mechanical advantage
Mechanical advantage = 4
Explanation;Screwdriver is a type of wheel and axle and the mechanical advantage of a wheel and axle depends upon the size of the wheel compared with the size of the axle.To calculate the mechanical advantage of a wheel and axle, you take the radius of the wheel, (which is the distance from the center of the wheel to the outside edge), and divide it by the radius of the axle.In this case;
Radius of the screwdriver’s handle = 4 cm
Radius of the shaft = 1 cm
Therefore,
Ideal mechanical advantage = 4 cm/1 cm
= 4
If there is a North and South Pole on a magnet why don’t north and north meat or south and south
Because like poles repel and unlike poles attract. This is a property of every magnet.
Final answer:
Magnets have both north and south poles, which cannot be separated; like poles repel each other, preventing north poles or south poles from meeting. Cutting a magnet results in new pairs of poles, as they always occur in pairs.
Explanation:
Every magnet has two types of poles, a north pole and a south pole. These poles always come in pairs and cannot be separated; they exhibit a fundamental property of magnets. The reason a north pole does not meet another north pole, or a south pole another south pole, is due to the magnetic fields that they generate. Like poles will always repel each other, which means the north pole of one magnet will repel the north pole of another magnet, and the same goes for two south poles.
When a magnet is cut, even into very small fragments, each piece will retain a north and a south pole. It is impossible to isolate a north pole or a south pole on its own, which is a basic principle of magnetism. Therefore, regardless of how much you divide a magnet, you will never end up with a single pole; new pairs of poles will emerge in each fragment. This inherent characteristic is verified by experiments and is even observable on the atomic level with elements that exhibit magnetic properties, such as iron.
Compare and contrast velocity and speed
Velocity and speed are basically the same thing but velocity has a direction and speed does not. Both are the rate at which something or someone moves :)
If a light Ray is aimed so that it bounces off a metal drain in a pool, the light Ray will reflect off the drain according to ? A) shells law B) the law of reflection C) the law of refraction D) the law of incidence
Answer:
B) the law of reflection
Explanation:
When a light ray reflects off a surface, it obeys the law of reflection.
A few definitions before giving the law of reflection:
- The angle of incidence is defined as the angle between the incident ray and the normal to the surface
- The angle of reflection is defined as the angle between the reflected ray and the normal to the surface
The law of reflection states that:
- The angle of incidence is equal to the angle of reflection
- The incident ray and the reflected ray lie both on the same plane.
What is the temperature of a gas in which the atoms are moving very, very slowly? Question 9 options: cold hot room temperature
The temperature of the gas will be cold, because the atoms move very slow,
Answer:
cold
Explanation:
According to kinetic theory of gases, gases at same temperature have same kinetic energy. The speed (v) of the particles of the gas is directly proportional to the temperature (T) of the gas.
K.E. ∝ T
v ∝ T
In the given situation, the atoms of gas are moving very slowly. This means that the temperature of the gas must be very low. The temperature of the gas would be cold.
What factor might be contributing to climate change
Final answer:
Climate change is primarily driven by the emission of greenhouse gases like carbon dioxide and methane, mainly from the burning of fossil fuels, deforestation, agriculture, and manufacturing. Human-caused factors are the most significant contributors to the current rates of global warming, surpassing natural influences on the climate.
Explanation:
One significant factor contributing to climate change is the emission of greenhouse gases such as carbon dioxide (CO2) and methane. The largest driver of warming comes from burning fossil fuels like coal, oil, and natural gas, which is the main source of CO2 emissions. This is further compounded by deforestation, agriculture, and manufacturing. Other manmade causes include increases in near-surface ozone from internal combustion engines, and aerosols such as carbon black and dust, which impact the Earth's albedo and its ability to reflect solar radiation.
It is essential to distinguish between natural factors that have historically influenced climate, such as changes in Earth's orbital patterns, plate tectonics, solar output, and volcanic activity, versus the anthropogenic (human-caused) factors driving the current unprecedented rates of climate change. Human-related factors far outweigh natural influences, which cannot fully explain the rapid increase in global temperatures observed today. The use of fossil fuels for energy and transportation is identified as the critical factor in fueling the current trend of climate change, contributing directly to the greenhouse effect.
Efforts to reduce emissions, transition to renewable energy sources, and implement more sustainable practices are vital steps in addressing the ongoing climate crisis. This reflects a dire need for coordinated global action to mitigate the impacts on food supply, water resources, ecosystems, and human health.
Materials such as oil and gas are used as fuel because they have what chemical property?
Among the most important characteristics of fuels is their heating value.
oil and gas have relatively high heating values as compared to other locally available materials. they are also easy to burn as they are highly inflammable.
ignition takes less time due to this property.
Which object has the greatest gravitational attraction ?
Jupiter is the largest planet in our Solar System. Hence, Jupiter has the greatest gravitational attraction in our Solar System.
What is gravity?Gravity is a fundamental interaction in physics that produces attraction between all objects with mass or energy. Of the four fundamental interactions, gravity is by far the least powerful; at the level of subatomic particles, it makes no difference at all.
The motion of planets, stars, galaxies, and even light is controlled by gravity, which is the most important interaction between things at the macroscopic level.
Strength of gravitational force an be expressed as:
E = GM/r²
Where G = universal gravitational constant and M = mass of the planet; r = distance between the planet and the object.
As Jupiter is the largest planet in our Solar System, Jupiter has the greatest gravitational attraction in our Solar System.
Learn more about gravity here:
https://brainly.com/question/4014727
#SPJ6
Which of these statements about mixtures is true A.mixtures are made up of elements bonded together B.Elements and compounds are types of mixtures C.Pure substances are made up of mixtures combined in specific ratios D.mixtures are classified based on the distribution of particles in them
The true statement is that mixtures are classified based on the distribution of particles in them. Mixtures are a combination of two or more pure substances that retain their individual properties. Elements and compounds, often components of a mixture, are not inherently mixtures themselves.
Explanation:Among the statements given about mixtures, the true one is statement D: mixtures are classified based on the distribution of particles in them. Mixtures are a combination of two or more pure substances in which each substance keeps its own properties. They are not chemically combined. Elements and compounds can often form part of a mixture but are not, in themselves, mixtures. Elements, compounds, and mixtures each have different classifications and properties in the field of chemistry.
Learn more about Mixtures here:https://brainly.com/question/22742069
#SPJ6