Ou are walking around your neighborhood and you see a child on top of a roof of a building kick a soccer ball. the soccer ball is kicked at 47° from the edge of the building with an initial velocity of 21 m/s and lands 57 meters away from the wall. how tall is the building that the child is standing on?

Answers

Answer 1
9.16 meters First, split the velocity into horizontal and vertical components. h = 21 cos(47°) = 21 * 0.744270977 = 15.62969052 m/s v = 21 sin(47°) = 21 * 0.731353702 = 15.35842773 m/s Now determine how many seconds the ball had to travel to reach 57 meters. T = 57 m / 15.62969052 m/s = 3.647 s height of the ball at time T is d = vT - 0.5AT^2 where v = initial velocity T = Time A = acceleration due to gravity (9.8m/s^2) Plug in the known values d = (15.35842773 m/s)(3.647 s) - 0.5 9.8 m/s^2 (3.647 s)^2 d = 56.01219 m - 4.9 m/s^2 (13.30061s^2) d = 56.01219 m - 65.17298 m d = -9.1608 m So the ball fell a total of 9.16 meters, which means that the building was 9.16 meters tall.

Related Questions

A student pushes a box with a total mass of 50kg. What is the net force on the box if it accelerates 1.5m/s^2?

Answers

As the second law of physics states, the force is equal with the mass multiplied with the acceleration of the object. 
[tex]F=m*a[/tex]
Thus for the given box the net force on it is
[tex]F=50*1.5 (m/s^2)=75 (N)[/tex]

A 700 g can of beans is dropped from a shelf that is 1.5 m high. What is the gravitational potential energy of this can? Round your answer to the nearest tenth of a joule.
_____ J.

Answers

To find the gravitational potential energy of an object, we can use this equation: GPE = mgh m is the mass of the object in kg g = 9.80 m/s^2 h is the height of the object in meters GPE = mgh GPE = (0.700 kg) (9.80 m/s^2) (1.5 m) GPE = 10.3 J The gravitational potential energy of this can is 10.3 J

Answer:  10.3

Explanation:  Edge

base your answers on the following four graphs, which represent the relationship between speed and time for four different objects, A, B, C, and D moving, in a straight line

Answers

I would say B. Hope this helps Plz give a thx

The required answers are: 1) Object C, 2) Object B, 3) Object C.

Based on the graphs, here are the answers to the given questions:

Object C had a reta rding force acting on it. This is because its speed is decreasing over time, which means it is decelerating.

Object B was not accelerating. This is because its speed is constant over time.

Object C traveled the greatest distance in the 3.0-second time interval. The area under the speed-time curve represents the distance traveled, and Object C's curve has the largest enclosed area.

Area = Triangle + rectangle

A = 1/2 x base x height + length x breadth

A = 1/2 x 3 x (30-20) + 3 x 20

A = 15 + 60

A = 75 = distance in meters.

Complete Question:

Based your answers to questions on the following four graphs, which represent the relationship between speed and time for four different objects, A, B, C, and D moving, in ạ straight line.

1. Which object had a reta rding force acting on it?

2. Which object was not accelerating?

3. Which object traveled the greatest distance in the 3.0-second time interval?                                

A 55 g mouse runs out to the end of the 17 cm-long minute hand of a grandfather clock when the clock reads 10 minutes past the hour. What torque does the mouse's weight exert about the rotation axis of the clock hand?

Answers

The equation for torque is written below:

τ = rFsinθ
where
τ is torque 
r is the length of minute hand
F is the force exerted by the mouse
θ is the angle

Every number interval in the clock has an angle of 30°. Because 10 minutes past the hour coincides with the number 10, θ = 30°*2 = 60°. For the force, it is simply the weight of the mouse which is
F = mg = (55g)*(1 kg/1000g)*(9.81 m/s²) = 0.53955 N

Substituting the rest of the values,

τ = (17cm)*(1 m/100 cm)*(0.53955 N)*(sin60°)
τ = 0.079 N·m

The torque exerted by the mouse's weight on the clock's minute hand is calculated to be 0.09163 N·m using the torque formula with force, radius, and the angle between them.

To determine the torque exerted by the mouse's weight on the clock's minute hand when it is 10 minutes past the hour, we need to apply the formula:

Torque (τ) = r × F × sin(θ)

Here:

r is the radius (distance from the axis to the point where the force is applied), which is 17 cm or 0.17 m. F is the force, which is the weight of the mouse. The weight is given by the mass times the acceleration due to gravity: F = m × g = 0.055 kg × 9.8 m/s² = 0.539 N. θ is the angle between the force and the lever arm. At 10 minutes past the hour, the minute hand is horizontal, and the force of gravity acts vertically, so θ = 90° (sin(90°) = 1).

Substituting these values into the formula:

τ = 0.17 m × 0.539 N × 1 = 0.09163 N·m.

Thus, the torque exerted by the mouse's weight about the rotation axis of the clock hand is 0.09163 N·m.

The current through a 12v lamp when it is connected to a 12v battery is 2.0 A. Calculate the resistance of the lamp at this current

Answers

Resistance = (voltage) / (current)

= (12 v) / (2 A) = 6 ohms .
Final answer:

The resistance of a lamp connected to a 12v battery that generates a current of 2.0A is calculated using Ohm's law to be 6 ohms.

Explanation:

The question asks about the resistance of a lamp connected to a 12v battery that generates a current of 2.0 A.

Using Ohm's law which states that voltage(V) equals current(I) times resistance(R), or V = IR , we can calculate the resistance. In this case, we know the current (I) is 2.0 A and the voltage (V) is 12 V.

We rearrange the formula to find R (resistance) = V/I. Substituting the given values, we have: R = 12v/2.0A = 6 ohms.

Hence, the resistance of the lamp at the current of 2.0 A is 6 ohms.

Learn more about Electrical Resistance here:

https://brainly.com/question/31668005

#SPJ3

A wave has the wavelength equal to 396 nm. what must be the frequency of this wave

Answers

This assumes that the wave has velocity c (is light).

When Babe Ruth hit a homer over the 10
m
-high right-field fence 80
m
from home plate, roughly what was the minimum speed of the ball when it left the bat? Assume the ball was hit 0.90
m
above the ground and its path initially made a 45


angle with the ground

Answers

Final answer:

The query involves the application of physics specifically taking into consideration projectile motion. The minimum speed of the ball when it left the bat, assuming a 45° launch angle and no air resistance, is calculated to be approximately 28.36 m/s.

Explanation:

This is a question about projectile motion in physics and requires the understanding and application of kinematic equations. Projectile motion assumes air resistance is negligible, and the only force operating on the object is gravity.

The formula to calculate the initial velocity (or speed when the angle is 45°) of the projectile is v = sqrt((g * d) / sin(2θ)), where g is the acceleration due to gravity (approx. 9.8 m/s²), d is the distance, and θ is the launch angle.

So plugging in the values: sqrt((9.8 m/s² * 81 m) / sin(90°)) gives us approximately 28.36 m/s. Therefore, the minimum speed of the ball when it left the bat, assuming a 45° launch angle, is roughly 28.36 m/s.

Learn more about Projectile Motion here:

https://brainly.com/question/29545516

#SPJ12

A duck with a mass of 0.90 kilograms flies at a rate of 12.0 m/s. What is the kinetic energy of the duck?

Answers

Answer:

Duck's kinetic energy is 64.8 Joules

Explanation:

It is given that,

Mass of the duck, m = 0.9 kg

Velocity of the duck is, v = 12 m/s

We have to find the velocity of the duck. It is given due to the motion of an object. Mathematically, it is written as :

[tex]KE=\dfrac{1}{2}mv^2[/tex]

[tex]KE=\dfrac{1}{2}\times 0.9\ kg\times (12\ m/s)^2[/tex]

KE = 64.8 Joules

Hence, the kinetic energy of the duck is 64.8 Joules              

Like the polar bear, the walrus is a strong swimmer, although it does not have the same endurance. For short periods of time, a walrus can swim at an average speed of 9.7 m/s. How far would a walrus swim at this speed in 3.4 minutes?

Answers

the answer should be 35.89 meters in 3.4 minutes. I dont know for sure though
The answer should be 35.89 meters in3.4 minutes

Spaceship 1 and spaceship 2 have equal masses of 300 kg. spaceship 1 has an initial momentum magnitude of 600 kg-m/s. what is its initial speed?

Answers

Explanation :

Given that,

Mass of the spaceship 1, m = 300 kg

Initial momentum of the spaceship 1, p = 600 kgm/s

Momentum is the product of the mass and the velocity with which it is moving i.e.

p = m v

[tex]v=\dfrac{p}{m}[/tex]

[tex]v=\dfrac{600\ kgm/s}{300\ kg}[/tex]

[tex]v=2\ m/s[/tex]

The initial velocity of the spaceship 1 is 2 m/s.

Hence, this is the required solution.

Final answer:

To find the initial speed of spaceship 1 with a momentum of 600 kg-m/s and mass of 300 kg, one should use the momentum formula (momentum = mass * velocity) and solve for velocity, resulting in an initial speed of 2 m/s.

Explanation:

To calculate the initial speed of spaceship 1 with a given momentum, we need the formula for momentum, which is the product of mass and velocity (p = m * v). Since we have the mass (m = 300 kg) and the momentum (p = 600 kg-m/s), we can solve for the initial speed (v) of spaceship 1 by rearranging the formula to v = p / m.

Doing the calculation gives us v = 600 kg-m/s / 300 kg, which results in v = 2 m/s. Therefore, the initial speed of spaceship 1 is 2 meters per second.

Superman lived on another planet where the acceleration due to gravity is 23.6 m/s2 . If a woman falls from a building that is 88.3 m tall, how long does he have to save her before she hits the ground?

Answers

Acceleration due to gravity = 2.6m/s²

Length of building = d = 88.3m

Time he needed before she hits the ground = ?
 we can find the time by using the formula;

D = 1/2at²

Now putting the value;

88.3 = (1/2) a t²

88.3 = 1/2 x 23.6 x t²

t² = 88.3 / 11.8

= 7.48

t = 2.735 seconds

Are the objects described here in static equilibrium, dynamic equilibrium, or not equilibrium at all? Explain.

a. a 200 pound barbell is held above your head
b. a girder is being lifted at a constant speed by a crane
c. a girder is being lowered into place. its is slowing down
d. a jet plane has reached its cruising speed an altitude
e. a box in the back of a truck doesn't slide as the truck stops

Answers

Statement a and e are in static equilibrium, b and d are in dynamic equilibrium and c is not at equilibrium at all.

FURTHER EXPLANATION

When the net force acting on an object is zero, the object is said to be at equilibrium. The state of equilibrium can be classified into two: static and dynamic.

Static equilibrium is when the net force is zero resulting in the object being at rest or not moving.

Dynamic equilibrium is when the resultant force acting on an object is zero and the object is moving in a uniform motion (i.e. constant or unchanging speed).

A. a 200 pound barbell is held above your head

Since the barbel is "held above your head" and is implied to be at rest since there is no change in its position during the time it is held, then this situation is an example of static equilibrium.

B. A girder is being lifted at a constant speed by a crane

This is dynamic equilibrium because the object is moving "at a constant speed".

C. A girder is being lowered into place. It is slowing down.

This is not equilibrium condition because the objects is neither at rest nor moving at a constant speed. It is "slowing down", so the speed is decreasing.

D. A jet plane has reached its cruising speed and altitude.

The "cruising speed" is the speed that is maintained while the jet plane is traveling because this is considered to be the most efficient speed. Since it is maintained, the jet plane is said to be in constant motion. Therefore, this is dynamic equilibrium.

E. A box in the back of a truck doesn't slide as the truck stops.

This is static equilibrium because the box is stationary or not moving.

LEARN MOREBalanced Forces https://brainly.com/question/1675020Resultant Force https://brainly.com/question/7041906Friction https://brainly.com/question/3401004

Keywords: equilibrium, static equilibrium, dynamic equilibrium

Final answer:

Objects in static equilibrium are at rest with balanced forces, while those in dynamic equilibrium move with constant velocity and no acceleration. A barbell held still is in static equilibrium, a girder moving consistently while being lifted is in dynamic equilibrium, and a plane at cruising altitude and speed is also in dynamic equilibrium.

Explanation:

Objects can be in either static equilibrium, dynamic equilibrium, or not in equilibrium at all. When an object is at rest and the net external force and torque acting on it are zero, it is in static equilibrium. On the other hand, an object in motion with constant velocity and zero acceleration, where the net external forces and torques are also zero, is in dynamic equilibrium.

a. A 200 pound barbell held above your head is in static equilibrium if it is motionless and the forces acting on it are balanced.b. A girder being lifted at a constant speed by a crane is in dynamic equilibrium because it moves with a constant velocity which means there is no net acceleration.c. A girder being lowered into place that is slowing down is not in equilibrium because it is experiencing a net acceleration, meaning that the forces are not balanced.d. A jet plane at cruising speed and altitude is in dynamic equilibrium as it is moving with a constant velocity and the forces are balanced.e. A box in the back of a truck that doesn't slide as the truck stops is initially in dynamic equilibrium while the truck is in motion if the box is moving at a constant velocity relative to the truck, but it becomes static equilibrium once the truck stops if the box remains at rest.

Gold has a density of 19.3 grams per cubic centimeter. what is the density of gold in metric tons per cubic meter?

Answers

Final answer:

The density of gold is 19.3 grams per cubic centimeter. To convert this to metric tons per cubic meter, we convert grams to metric tons and cubic centimeters to cubic meters, which gives us a density of 19.3 metric tons per cubic meter.

Explanation:

The question asks for the density of gold in metric tons per cubic meter. Gold's known density is 19.3 grams per cubic centimeter. To convert this to metric tons per cubic meter, we first need to convert grams to metric tons. We know that 1 metric ton equals 1,000,000 grams. Therefore, 19.3 grams is 0.0000193 metric tons. Then, we need to convert cubic centimeters to cubic meters. As there are 1,000,000 cubic centimeters in a cubic meter, the density of gold becomes: 0.0000193 metric tons times 1,000,000, equaling 19.3 metric tons per cubic meter.

Learn more about Density conversion here:

https://brainly.com/question/32856240

#SPJ12

A large box is being pushed by three separate people. The first person is pushing the box at a rate of 6 m/s directly north. The second person is pushing the box at a rate of 6 m/s directly to the northeast. The third person is pushing the box at a rate of 6 m/s directly east. Determine the magnitude and direct of the resultant vector of he box.

Answers

We can find the east component of the velocity. v_east = 6 m/s + (6 m/s) (cos (45)) v_east = 6 m/s + 4.24 m/s v_east = 10.24 m/s We can find the north component of the velocity. v_north = 6 m/s + (6 m/s) (sin (45)) v_north = 6 m/s + 4.24 m/s v_north = 10.24 m/s We can find the magnitude of the velocity. v = sqrt { (v_east)^2 + (v_north)^2} v = sqrt { (10.24 m/s)^2 + (10.24 m/s)^2} v = 14.5 m/s We can find the angle theta north of east. tan(theta) = 10.24 / 10.24 theta = arctan (1) theta = 45 Note that this angle is directly northeast. The magnitude of the velocity is 14.5 m/s and the box is moving directly to the northeast.

How is a scientific law unlike a scientific theory?

Answers

The difference between scientific theory and scientific law!!! A scientific law is a description of an observed phenomenon. A SCIENTIFIC THEORY IS AN EXPLANATION OF AN OBSERVED PHENOMENON. UNLIKE LAWS, THEORIESACTUALLY EXPLAIN WHY THINGS ARE THE WAY THEY ARE..

Answer:

Both scientific law and theory are the scientific statements related to any natural phenomenon.

Both are the proved hypothesis but they differ as a scientific law tells how a natural phenomenon takes place whereas a theory explains why the natural phenomenon takes place.

A scientific law cannot be changed but a theory can be modified and changed when new evidence comes into existence.

Thus, both are different.

A cannonball is launched from the ground at an angle of 30 degrees above the horizontal and a speed of 30 m/s. Ideally (no air resistance) the ball will land on the ground with a speed of
A. 0 m/s. B. 20 m/s. C. 30 m/s. D. 40 m/s. E. There is not enough information to say.

Answers

B is the answer please mark brainliest

The answer is not B.

A bicycle rider travels 50.0 km in 2.5 hours. What is his average speed?

Answers

50km / 2.5 = 20 km per hour

A crazy dog runs 300 meters east, changes his mind and then runs 200 meters west. He then changes his mind again and runs 500 meters east. This entire trip takes 2 minutes. a) what is the total distance traveled? b) What is the total displacement? c) What was the dog’s average speed? d) What was the dog’s average velocity?

Answers

1000 meters is his total distance traveled
Displacement- 600meters?
Average speed- 1000÷2 - 500m/s
V

Answer:

Distance 1000 meters

Displacement: 600 meters east.

Average speed: 500 meters per minute

Average velocity: 300 meters per minute

Explanation:

In order to calculate this you just have to know the difference between distance and displacement, distance is the total meters that someone walk or run or moved accros, and displacement is a vector, that is the result of how far away from the starting point the object finished. Then with this two values you can calculate average speed which is distance between time, and average velocity which is displacement between time.

Can an object, such as a plane at cruising altitude, be in motion if the net force acting on it is zero?

Answers

If the net force of the object, such as a plane at cruising altitude then the motion will not be changed. Newton's first law states that "if there is no force on an object, then its state of motion will not change".

A river has a steady speed of 0.500 m/s. a student swims upstream a distance of 1.00 km and swims back to the starting point. (a) if the student can swim at a speed of 1.20 m/s in still water, how long does the trip take? (b) how much time is required in still water for the same length swim? (c) intuitively, why does the swim take lon- ger when there is a current?

Answers

a. Upstream refers to the motion of the swimmer where he is against the current. The resultant speed of the swimmer is equal to the difference of the velocity or speed in still water and that of the river. The time it requires to cover the distance is calculated through the equation,
               t = d / s
where t is time, d is distance, and s is speed. Substituting the known values,
             t = 1000 m / (1.2 m/s - 0.5 m/s) = 1,428.57 seconds

(b) The time it requires for the swimmer to swim in still water,
            t = 1000 m / (1.2 m/s) = 833.33 seconds

(c) Intuitively, it takes longer to cover the distance when there is current because the current will serve as resistance to the motion of the swimmer, partially moving it backwards instead of forward. 


Final answer:

The round trip swimming in the river with a current takes a total of 2016.8 seconds, while the same trip in still water would take 1666.7 seconds. The additional time required when there is a current is because the effective speed of the swimmer is reduced when going against the current, which outweighs the time saved by the increased speed when going with the current.

Explanation:

A river has a steady speed of 0.500 m/s and a student swims upstream a distance of 1.00 km and swims back to the starting point. Given these conditions, we can calculate the time taken for the entire trip, the time required for a similar trip in still water, and understand why swimming in a current takes longer.

Part A: Time for the round trip with current

Upstream, the student's effective speed is 0.70 m/s (1.20 m/s - 0.500 m/s) since the current opposes the swimmer. Downstream, the effective speed is 1.70 m/s (1.20 m/s + 0.500 m/s) as the current aids the swimmer. To find the time, we use the formula time = distance / speed. Thus, the time taken upstream is 1428.6 seconds and downstream is 588.2 seconds. The total time for the round trip is 2016.8 seconds.

Part B: Time for the same swim in still water

In still water, where there is no current, the speed of the swimmer is 1.20 m/s. The total distance of 2.00 km (1.00 km upstream and 1.00 km downstream) would require 1666.7 seconds to swim, calculated using the same distance/speed formula.

Part C: Intuition behind increased time with current

Intuitively, when there is a current, the effective speed of the swimmer decreases when swimming upstream because the current opposes the swimmer's motion, and although it increases when swimming downstream, the overall effect is that more time is needed to complete the swim as compared to swimming in still water. This is due to the fact that the loss of speed when going against the current has a more significant impact on the total time than the gain in speed when going with the current.

A cat is moving at 18 m/s when it accelerates at 4 m/s2 for 2 seconds. what is his new velocity?

Answers

Velocity =18
Velocity at 2 seconds=18+4+4=26

Answer:

26m/s

Explanation:

Acceleration is the change in velocity of a body with respect to time. Mathematically,

Acceleration = change in velocity/time

Acceleration = final velocity (v) - initial velocity (u)/time (t)

Given a = 4m/s², v = ? u = 18m/s, t = 2seconds.

Substituting in the given formula,

4 = v-18/2

8 = v-18

v = 8+18

v = 26m/s

The new velocity of the body is therefore 26m/s

If a block of copper measures 2.00 cm x 4.00 cm x 5.00 cm and weighs 356 grams, what is its density?

Answers

density = g/mL
cm^3 = mL

2*4*5 = 40 mL

density = 356/40 = 8.9 g/mL

The density of the block is 8.9 gm/cm³

What is volume ?

Volume is a three dimensional space occupy by the body of particular shape. Generally expressed in cubic meter.

Here, it is given that length of block (l) = 2 cm

breadth of block (b) = 4 cm

heigth of block (h) = 5 cm

weight of block (m) = 356 gm

the volume of the block is calculated using formula :

[tex]\begin{aligned}V&= lbh\\&=2\cdot4\cdot5\\&=40 \text{ cm}^{3}\end{aligned}[/tex]

Now density of block will  be :

[tex]\begin{aligned}\rho&=\frac{m}{V}\\&=\frac{356}{40}\\&=8.9 \:\text{gm}/ \text{cm}^{3}\end{aligned}[/tex]

Therefore, the density of the block is 8.9 gm/cm³

check and know more about density here :

https://brainly.com/question/15164682

#SPJ2

An alpha particle is also referred to as a nucleus of which isotope? lithium-7 helium-4 hydrogen-2 helium-2

Answers

It's helium-4, my dude.

Answer: Option (b) is the correct answer.

Explanation:

A positively charged particle that consists of two protons and two neutrons is known as an alpha particle.

The symbol for alpha particle is [tex]^{4}_{2}\alpha[/tex]. An alpha particle is similar to a helium atom because helium atom also has mass number (number of protons + number of neutrons) as 4 and atomic number (number of protons) as 2.

Symbol of helium atom is [tex]^{4}_{2}He[/tex].

Thus, we can conclude that an alpha particle is also referred to as a nucleus of helium isotope.

The early earth was much cooler than it is today.

a. True

b. False

Answers

This statement is true. Early earth was much cooler than it is today.

This is because the pollution as well as the population number was very small compared to nowadays population and pollution.
The pollution mainly is causing a decay in the ozone layer which protects the earth from uv rays. Thus, more of these rays enter the atmosphere and increase the temperature.
The increase in population along with the decrease in green areas leads to the increase in the percentage of carbon dioxide in the atmosphere, which again leads to an increase in the temperature.

what are the three hallmarks of science

Answers

1Seek explanations for observed phenomena that rely solely on natural causes
2Progresses through creating and testing models of nature that explain observations as simply as possible
3Scientific model must make testable predictions; abandon or revise model if predictions do not agree with observations
Final answer:

The three hallmarks of science are empiricism, skepticism, and the use of rational arguments.

Explanation:

The three hallmarks of science are: empiricism, skepticism, and the use of rational arguments. Empiricism refers to the concept that all knowledge is derived from sensory experience. It involves the collection of data and observation of phenomena. Skepticism in science refers to the practice of questioning the validity and reliability of claims and not accepting them blindly. It involves requiring substantial evidence before affirming a claim. Rational arguments refer to using logical reasoning to explain natural events. Scientists use rational arguments to construct theories from experimental results.

Learn more about Hallmarks of science here:

https://brainly.com/question/34384557

How far is the rocket from the launch pad 6.70 s later when the rocket engine runs out of fuel?

Answers

There's not enough context. 

A person leaves a house and walks three blocks north, then walks three blocks west. In what direction is the displacement of the person, relative to the starting point? A North B Northwest C South D Southwest

Answers

B Northwest hope this helps


The process of converting a continuous signal to a series of 1s and 0s introduces small errors to the sound as it is recorded. What is this process called?

Answers

Answer: Quantization

Quantization maps input values from continuous data into digital signals. This process is common in signal processing of sound, wave and seismic signals.

Round off and truncation errors are common in truncation processes.
Truncation errors are easier to control, but round off errors are dictated by the data processing hardware.

Can you guys help to understand this graph I'm so confused why I getting wrong?

Answers

Thanks for the question!

A would be walking away from home because the distance is going down.

B would be not walking because the distance is staying constant.

C would be walking slowly because the slope is small.

D would be walking quickly because the slope is large.

Hope this helps!
The one fact that needs to be mentioned but isn't given anywhere on or around the graph is: The distance, on the vertical axis, is the distance FROM home. So any point on the graph where the distance is zero ... the point is in the x-axis ... is a point AT home.

Segment D ...
Walking AWAY from home; distance increases as time increases.

Segment B ...
Not walking; distance doesn't change as time increases.

Segment C ...
Walking away from home, but slower than before; distance increases as time increases, but not as fast. Slope is less than segment-D.

Segment A ...
Going home; distance is DEcreasing as time increases. Walking pretty fast ... the slope of the line is steep.

suppose larry stands with more weight on one scale than the other if one scale reads 400 N. what does the other read?

Answers

the other scale will either have a higher or lower number because 400 could be the bigger number or the smaller number but we don't know that so you cant exactly answer it.

You will take 400N divide by 2. The answer will be 200N.

Other Questions
SOLVE Janet piano teacher charged $12.50 for a 30-minute lesson if Janet has a 4 lesson per month how much will she owe her piano teacher a year How accurate was hector st. john de crevecoeur's description of america as a melting pot? how would you find the area and Perimeter of this shape? The years 1915-1940 saw the great african-american migration, when millions of african-americans migrated from the south to the north. how did world war ii help foster this massive migration? how did this migration affect life in both the south and the north? winnie is driving at a constant rate it takes her 4 hours to drive 232 miles.she creates a graph of distance versus time for the trip using the equasion d=58t The amish people live mostly in lancaster county, pennsylvania, and the surrounding areas. the people of this religious group are known for their simple lifestyles and their rejection of modern conveniences. a map showing the distribution of amish in pennsylvania would help to define a What caused conflict between early European settlers and Native Americans? (a) Europeans wanted the Native Americans to become Christians to save them from their sinful ways, convert to their religion.(b) Europeans wanted the Native Americans to share their resources with them.(c) Native Americans believed the Europeans were angering their gods.(d) Native Americans believed the Europeans were hiding gold and silver from them. How many moles of aspartame are present in 5.00 mg of aspartame? I break down organic matter into simpler compounds. I am a? Douglas mccauley argues we should protect natural resources by valuing: How many languages has don quixote been translated into? _____________ is the ability of microscopes to maintain a slide in proper focus when changing magnification The case of marbury vs. madison established the power of _______________, which has been assumed by the founders, but not enumerated in the constitution.a. presidential impeachmentb. congressional supremacyc. judicial reviewd. congressional oversight of the bureaucracye. states' rights The sum of Johns and Matts ages is 42. The difference of their ages is 6. If Matt is older than John, what are their ages? Matt is 16 and John is 20. Matt is 30 and John is 14. Matt is 24 and John is 18. In the management process, the organizing stage includes setting goals and deciding how to achieve them. Charles has noticed that several of his restaurant employees have been wasting a lot of resources lately. He wants to make the best possible use of every resource in his restaurant. How do you think Charles can keep a tab on the wastage of resources in his restaurant?A. deduct some amount from the salary of such employeesB. restrict access to resourcesC. provide only limited resourcesD. conduct waste audit how was the aztec skill at engineering demonstrated in mesoamerica after about 1300 3b-12=5b-2 please answer I need for homework!!!! please help me asap Show the correct relationship between altitude and boiling point. If two lines intersect, then they intersect in exactly _____.two pointsone pointone lineone plane Steam Workshop Downloader