Sulfur dioxide gas reacts with oxygen gas to form sulfur trioxide gas. express your answer as a chemical equation. identify all of the phases in your answer.

Answer:

B

Explanation:

edg 2020

Given,

Mass of nitrogen = 0.403 g  

Mass of hydrogen = 0.0864 g  

Atomic mass of H = 1 amu

Moles = mass / molar mass

Molar mass of H₂ = 1 x 2 = 2 g/mol

Moles of hydrogen = 0.0864 g / 2 g/mol = 0.0432 moles

Nitrogen combines with hydrogen hence the chemical equation is:  

N₂ + 3H₂ → 2NH₃  

As per the balanced chemical reaction, 3 moles of H₂ combines with 1 mole of N₂

or, 1 mole of H₂ combines with 1/3rd mole of N₂

Therefore, 0.0432 moles  of H₂ will combine with (1/3 x 0.0432 moles of N₂)

Moles of N₂ =   0.0144 mol

Molar mass = mass / moles

Molar mass of N₂ = (0.043 g N₂) / (0.0144 mol N₂) = 2.986 g/mol of N₂  

Atomic mass of N = 2.986/2 = 1.493 amu  

In the electromagnetic spectrum, high frequencies, high wavenumbers, and low wavelengths are associated with high energy.

Electromagnetic spectrum is the range of frequencies of electromagnetic radiations and their respective wavelengths and photon energies.

The energy of a single photon in an electromagnetic spectrum is calculated as;

E = hf

[tex]E = \frac{hc}{\lambda}[/tex]

where;

Relationship between wavenumber and wavelength

[tex]n = \frac{1}{\lambda}[/tex]

Thus, in the electromagnetic spectrum, high frequencies, high wavenumbers, and low wavelengths are associated with high energy.

Learn more about electromagnetic spectrum here: https://brainly.com/question/25847009

At 37°C, a solution with a pH of 7.00 is slightly basic, because the neutral pH at this temperature is around 6.31.

A solution with a pH of 7.00 is typically considered neutral at a standard temperature of 25°C. However, the pH scale is temperature-dependent, meaning the pH for neutrality changes with temperature. At 37°C, which is around the normal human body temperature, the neutral pH is not 7.00, but rather closer to 6.31 because the ionization constant of water (Kw) changes with temperature.

In the specific instance of a solution with a pH of 7.00 at 37°C, we would consider it to be slightly basic. This is because, at 37°C, the neutral pH is approximately 6.31, and any pH above this value represents a basic solution, while a pH below this value would indicate an acidic solution.

The product of radioactive decay :

The atomic nucleus can experience decay into 2 particles or more due to the instability of its atomic nucleus.

Usually radioactive elements have an unstable atomic nucleus.

The main particles are emitted by radioactive elements so that they generally decay are alpha (α), beta (β) and gamma (γ) particles

General formulas used in decay:

[tex] \large {\boxed {Nt = No. (\frac {1} {2}) ^ {\frac {T} {t1 / 2}}}} [/tex]

Information:

T = duration of decay

t1 / 2 = elemental half-life

N₀ = the number of initial radioactive atoms

Nt = the number of radioactive atoms left after decaying during T time

At the core, the reaction applies the law of eternity

• 1. energy

the energy before and after the reaction is the same

• 2. atomic number

the number of atomic numbers before and after the same

• 3. mass number

the number of mass numbers before and after the same

Particles that play a role in core reactions include

• alpha α particles ₂He⁴

atomic number decreases by 2, mass number decreases by 4

• beta β ₋₁e⁰ particles

atomic number remains the same , mass number decreases by -1

• gamma particles γ

Core reactions that occur usually release high energy

• positron particles ₁e⁰

atomic number remains the same , mass number decreases by +1

In general, the core reaction equation can be written:

X = target core

a = particle fired

Y = new core

b = the particle produced

Q = heat energy

or can be written simply

X (a, b) Y

the identity of the missing nucleus

https://brainly.com/question/4207569

the process of radioactive decay

https://brainly.com/question/1770619

nuclear fusion and nuclear fission reactions

https://brainly.com/question/1949468

the product of radioactive decay

https://brainly.com/question/6029197

The balanced equation is written as;

C₆H₁₁OH (cyclohexanol) → C₆H₁₀(cyclohexene) + H₂O (water)

The balanced chemical equation for the dehydration of cyclohexanol C₆H₁₁OH to form cyclohexene (C6H10) is as follows:

C₆H₁₁OH (cyclohexanol) → C₆H₁₀(cyclohexene) + H₂O (water)

This equation represents the removal of a water molecule (H2O) from cyclohexanol to produce cyclohexene.

The process is typically carried out with the help of an acid catalyst, such as concentrated sulfuric acid (H₂SO₄).

The balanced equation shows that one molecule of cyclohexanol yields one molecule of cyclohexene and one molecule of water.

Learn about dehydration at: https://brainly.com/question/29584811

#SPJ3

The dehydration of cyclohexanol results in the formation of cyclohexene and water. This reaction is acid-catalyzed and proceeds through protonation, formation of a carbocation, and deprotonation steps. The balanced equation is C₆H₁₂O → C₆H₁₀ + H₂O.

Dehydration of Cyclohexanol

The process of dehydration involves the removal of water (H₂O) from a molecule. The dehydration of cyclohexanol (C₆H₁₂O) to form cyclohexene (C₆H₁₀) is an example of this type of reaction. This reaction is typically catalyzed by an acid such as phosphoric acid (H₃PO₄) or sulfuric acid (H₂SO₄).

C₆H₁₂O (cyclohexanol) → C₆H₁₀ (cyclohexene) + H₂O

The final product, cyclohexene, is an alkene that results from the elimination of water from cyclohexanol.

Answer:

22.5kJ

Explanation:

your welcome

The answer is A,Today is cloudy, but tomorrow will be clear and sunny.

Hope this helped :) have a nice day (:

When balancing the equation given xP₄O₆ + yH₂O -> zH₃PO₃with x equals 2, we need 8 molecules of H₃PO₃ to balance the phosphorus atoms, making the coefficient z equal to 8.

The question asks about balancing the chemical equation xP₄O₆(s) + yH₂O(l) -----> zH₃PO₃(aq) with the given condition that x equals 2. To balance the equation, we need to ensure that the number of each type of atom is the same on both sides of the equation. When x equals 2, this implies we have 2 P₄O₆ units leading to 8 phosphorus atoms in total. Each H₃PO₃ molecule contains one phosphorus atom, so we would need 8 molecules of H₃PO₃ to balance the phosphorus atoms. Thus, the coefficient z would be 8 in a balanced equation.

The calculated mass of [tex]Al_2O_3[/tex] formed should be approximately 223.04 g.

Given reaction: [tex]2Al + Fe_2O_3[/tex] → [tex]Al_2O_3 + 2Fe[/tex]

Calculate the moles of Al and [tex]Fe_2O_3[/tex]:

Molar mass of Al = 26.98 g/mol

Molar mass of [tex]Fe_2O_3[/tex] = (55.85 g/mol * 2) + (16.00 g/mol * 3)

= 159.70 g/mol

Moles of Al = 118 g / 26.98 g/mol

≈ 4.37 moles

Moles of [tex]Fe_2O_3[/tex] = 601 g / 159.70 g/mol

≈ 3.76 moles

Determine the limiting reactant:

The balanced equation shows that 2 moles of Al react with 1 mole of [tex]Fe_2O_3[/tex]. So, for the given moles of [tex]Fe_2O_3[/tex], Al is the limiting reactant.

Calculate the moles of [tex]Al_2O_3[/tex] formed:

From the balanced equation, 2 moles of Al produce 1 mole of [tex]Al_2O_3[/tex].

Moles of [tex]Al_2O_3[/tex] formed = 4.37 moles Al / 2

≈ 2.19 moles

Calculate the mass of [tex]Al_2O_3[/tex] formed:

Molar mass of [tex]Al_2O_3[/tex] = (26.98 g/mol * 2) + (16.00 g/mol * 3)

= 101.96 g/mol

Mass of [tex]Al_2O_3[/tex] formed = 2.19 moles * 101.96 g/mol

≈ 223.04 g

Therefore, the calculated mass of [tex]Al_2O_3[/tex] formed should be approximately 223.04 g.

Learn more about limiting reagent, here:

https://brainly.com/question/5425903

#SPJ12

To calculate the mass of Al2O3 formed and the amount of excess reagent left in the reaction between aluminum and iron(III) oxide, we need to perform stoichiometric calculations that involve converting grams to moles, identifying the limiting reagent, applying stoichiometric ratios to determine product amounts, and converting moles back to grams.

To answer this question, we need to apply the concept of stoichiometry, which is a branch of chemistry that deals with the relative quantities of reactants and products in chemical reactions. As the balanced chemical equation for the reaction between aluminum and iron(III) oxide is given as 2Al + Fe2O3 → Al2O3 + 2Fe, this suggests that 2 moles of aluminum react with 1 mole of iron(III) oxide to produce 1 mole of aluminum oxide and 2 moles of iron.

To find the mass of Al2O3 formed, we would convert the given mass of Al and Fe2O3 to moles using their respective molar masses, see which reagent is the limiting reagent, and then use this information to determine the mass of Al2O3 formed in the reaction. The limiting reagent in a chemical reaction is the reactant that is completely consumed and determines the maximum amount of product that can be formed. Once the limiting reagent is consumed, the reaction stops, leaving the other reactant in excess.

By converting the remaining mass of the excess reagent left at the end of the reaction back to grams, we would calculate the mass of the excess reagent left. This involves a multi-step process encompassing the conversion of mass to moles, comparison of molar amounts, application of stoichiometry to find product amounts, and conversion of moles back to grams.

https://brainly.com/question/30215297

#SPJ11

Stab pull is the process by which the Earth's tectonic plates move apart at their edges due to the force of gravity at divergent plate boundaries. It leads to the formation of mountains and volcanic activity.

Stab pull refers to the process by which the Earth's tectonic plates move apart at their edges due to the force of gravity. This occurs at divergent plate boundaries, where the edges of the leaves become denser and sink downwards and away from each other. As a result, new crust is created from magma upwelling beneath the leaves, leading to the formation of mountains and volcanic activity.

For example, the East African Rift System is a prime location for stab pull. The African Plate is splitting apart along this boundary, causing the formation of the Great Rift Valley and the creation of a new crust.

https://brainly.com/question/30878871

#SPJ12

Answer :  The value of [tex]pK_b[/tex] for hypochlorous anion is, 6.47

Explanation :

As we know that,

[tex]pK_a+pK_b=pK_w\\\\pK_a+pK_b=14\\\\pK_b=14-pK_a\\\\pK_b=14-(-\log K_a)\\\\pK_b=14+\log (K_a)[/tex]

Now put the value of [tex]K_a[/tex] in this expression, we get the value of [tex]pK_b[/tex]

[tex]pK_b=14+\log (3.0\times 10^{-8})[/tex]

[tex]pK_b=14+\log 3-8[/tex]

[tex]pK_b=6.47[/tex]

Therefore, the value of [tex]pK_b[/tex] for hypochlorous anion is, 6.47

The difference between strong and weak acids is determined by the acid dissociation constant (Kₐ). As Kₐ rises, the acid dissociates more. Therefore, strong acids must dissociate more in water. On the other hand, a weak acid has a lower propensity to ionize and release a hydrogen ion, resulting in a less acidic solution.

The standard used to calculate a molecule's alkalinity is called pkb. It is employed to gauge fundamental strength. The base will be more powerful with a lower pKb value. It is akin to the base dissociation constant's negative logarithm, Kb.

The equation connecting pKa and pKb is:

pKa + pKb = pKw

pKa + pKb = 14

pKb = 14-pKa

pKb = 14 - (-log Ka)

pKb = 14 + log (3.0 × 10⁻⁸)

pKb = 14 - 7.52

pKb = 6.48

To know more about pKb, visit;

https://brainly.com/question/31604463

#SPJ6

The dipole moment (p) resulting from the separation of a proton and an electron by 85 pm is approximately 3.7 Debye. This is calculated using the formula p = (+e) * (85 x 10^-12 m), where e is the elementary charge.

The magnitude of the dipole moment formed by separating a proton and an electron by 85 pm is indeed approximately 3.7 D (Debye).

Dipole moment formula: The dipole moment (p) of a molecule is calculated as the product of the charge (q) separated by the distance (D) between the charges. In this case, the charges are the electron (-e) and the proton (+e), and the distance is 85 pm (picometers).

Plugging in values: e = 1.602 x 10^-19 C, D = 85 x 10^-12 m, and the distance needs to be converted to meters: 85 pm = 85 x 10^-12 m.

Calculation: p = (+e) * (85 x 10^-12 m) = 1.602 x 10^-19 C * 85 x 10^-12 m ≈ 3.7 x 10^-30 C⋅m.

Converting to Debye: Since the Debye unit (D) is a convenient unit for dipole moments, we convert the result: 3.7 x 10^-30 C⋅m ≈ 3.7 D.

Therefore, the magnitude of the dipole moment in this case is approximately 3.7 Debye.

The partial pressure of Hydrogen gas can directly be calculated by simply taking the difference of the overall pressure and the vapour pressure of water. That is:

P (H2 gas) = 759.2 torr – 23.8 torr

P (H2 gas) = 735.4 torr

16.34 km/2.34 h = 6.98 km/h

The intermolecular forces present between [tex]{\text{C}}{{\text{H}}_3}{\text{C}}{{\text{H}}_2}{\text{N}}{{\text{H}}_2}[/tex] molecules are  

[tex]\boxed{{\text{hydrogen bonding and dispersion forces}}}[/tex]

Further Explanation:

Intermolecular forces:

The forces that exist between the molecules are known as intermolecular forces (IMF). IMF includes both attractive as well as repulsive forces. They are electrostatic in nature and determine the bulk properties of the substances like melting and boiling points. Molecules are held in any substance due to these forces.

The various types of intermolecular forces are as follows:

1. Hydrogen bonding:

It is an attractive force that exists between hydrogen and more electronegative elements like N, O, F. It can either be intermolecular or intramolecular. Intermolecular hydrogen bonding is the one that occurs between different molecules. For example, the bond between HF and [tex]{{\text{H}}_{\text{2}}}{\text{O}}[/tex]  is an intermolecular hydrogen bond. Intramolecular hydrogen bonding occurs between various parts of the same molecule. Ortho-nitro phenol and salicylaldehyde show this type of bonding.

2. Ion-dipole forces:

It is an attractive force that occurs between an ion and a molecule consisting of a dipole. The force between [tex]{\text{N}}{{\text{a}}^ + }[/tex]  and water molecule is an example of this force.

3. Ion-induced dipole forces:

It is an attractive force that occurs between an ion and a nonpolar molecule. It induces a dipole in the molecule, resulting in ion-induced dipole force. The bond between [tex]{\text{F}}{{\text{e}}^{2 + }}[/tex]  and oxygen molecule is an example of such kind of bond.

In [tex]{\mathbf{C}}{{\mathbf{H}}_{\mathbf{3}}}{\mathbf{C}}{{\mathbf{H}}_{\mathbf{2}}}{\mathbf{N}}{{\mathbf{H}}_{\mathbf{2}}}[/tex] , there is a presence of amine group [tex]\left({{\text{ - N}}{{\text{H}}_2}}\right)[/tex]  having a highly electronegative N atom. So it can form hydrogen bonds with hydrogen atom of solvent molecule like water. Also, a hydrocarbon chain [tex]\left({{\text{ - C}}{{\text{H}}_3}{\text{C}}{{\text{H}}_2}}\right)[/tex]  is present in the molecule and we know dispersion forces exist between atoms and molecules. So [tex]{\text{C}}{{\text{H}}_3}{\text{C}}{{\text{H}}_2}{\text{N}}{{\text{H}}_2}[/tex]  has both dispersion forces as well as hydrogen bonds between its molecules.

Learn more:

1. Number of covalent bonds formed by nitrogen: https://brainly.com/question/6029316

2. Which pair will form covalent bond?: https://brainly.com/question/1126757

Answer details:

Grade: Senior School

Subject: Chemistry

Chapter: Ionic and covalent bonding

Keywords: Intermolecular forces, CH3CHNH2, hydrogen bonding, dispersion forces, -NH2, -CH3CH2, amine, hydrocarbon, atoms, molecules.

Answer :

These are 5 assumptions of the kinetic molecular theory.

The first assumption is that the gases are made up of the tiny or small particles. The small particles has undefined volume but has a defined volume.

The second assumption is that the gas particles are in the continuous, rapid and random motion.

The third assumption is that the there is no force of attraction between gas particles.

The fourth assumption is that the temperature of a gas particles depends on the average kinetic energy of the particles of the gas.

The fifth assumption is that the collisions between the particles of the gas are completely elastic. That means there is no loss or gain of the energy when the particles of the gas colloid.

To find the number of moles of gas gained or lost, we can use the ideal gas law equation. By substituting the given values into the equation and simplifying, we find that the system gained or lost 0.921 moles of gas.

To find the number of moles of gas gained or lost, we will use the ideal gas law equation:

P1V1 / T1 = P2V2 / T2

Using the given information:

P1 = 1 atm, V1 = 22.4 L (at STP), T1 = 273 K

P2 = 2.00 atm, V2 = 14.5 L, T2 = 100 °C = 373 K

Substituting the values into the equation:

(1 atm)(22.4 L) / (273 K) = (2.00 atm)(14.5 L) / (373 K)

Simplifying the equation:

Moles gained or lost = (1 atm)(22.4 L)(373 K) / (273 K)(2.00 atm)(14.5 L)

Calculating the result:

Moles gained or lost = 0.921 moles

https://brainly.com/question/2446049

#SPJ11