The circled areas are called coronal mass ejections solar flares solar wind sunspots . They are cooler than hotter than the same temperature as the surrounding area.

Answer:  Due to its shape

Explanation:  Polarity of any substance can be determined by its shape. It can also be determined by its dipole moment.

It has positive charge at its one end and negative charge on the other end.It has one oxygen atom which has negative charge (being electronegative in nature) and has two hydrogen atoms which has positive charge.

Thus electron charge density present on the hydrogen is being pulled by the oxygen mking it polar in nature.

Answer:

Option b[tex]H_2O[/tex]

Explanation:

Covalent compounds are formed by the sharing of electrons while ionic compounds are formed by transfer of electrons.

In the give compound, [tex]CaCl_2[/tex], two electrons are transferred from Ca to two Cl atoms. Hence , it is an ionic compound.

In the compound, [tex]H_2O[/tex], bond is formed by the sharing of electrons. Oxygen shares two of its electrons while two hydrogens share one electron each during the formation of covalent bond.

In the compound NaOH, one electron is transferred from Na. Hence it is an ionic compound.

In the compound, LiF, one electron is transferred from Li to F. hence it is an ionic compound.

Among, the given options, only [tex]H_2O[/tex] is a covalent compound.

The amount in grams of water will be formed when 32.0 g H₂ is mixed with 32.0 g O₂ is 36 grams.

Moles from mass of any susbatnce will be calculated as:

n = W/M, where

W = given mass

M = molar mass

Given chemical reaction is:

2H₂  +  O₂  →  2H₂O

Moles of H₂ = 32g / 2g/mol = 16 mol

Moles of O₂ = 32g / 32g/mol = 1 mol

From the stoichiometry of the reaction, it is clear that

1 mole of O₂ = reacts with 2 moles of H₂

So in the given question, oxygen is the limiting reagent as hydrogen is present in excess quantity & predominated the formation of water.

1 mole of O₂ = produces 2 moles of H₂O

Now grams of water will be obtained by using mass-moles equation as:

W = (2mol)(18g/mol) = 36 grams.

Hence required mass of water is 36 grams.

To know more about mass & moles, visit the below link:

https://brainly.com/question/15249931

#SPJ3

Final answer:

When salt is added to water until no more dissolves, the solution becomes saturated and a dynamic equilibrium is established between the dissolved and undissolved salt. The water has reached its solubility limit, and though individual salt molecules continue to dissolve and precipitate, the visible amount of undissolved salt appears to remain constant.

Explanation:

When you add salt continuously to a glass of water, you will eventually notice that some salt will remain at the bottom because the solution has become saturated. This is a state where the water cannot dissolve any more salt at a given temperature and pressure, meaning you've reached the salt's solubility limit. At this point, a dynamic equilibrium is established between the undissolved salt at the bottom and the dissolved salt in the water. What this means is that the process of dissolution, where salt dissolves in water (NaCl(s) → NaCl(aq)), is still happening. Simultaneously, the reverse process, where dissolved salt precipitates out of the solution (NaCl(aq) → NaCl(s)), is also occurring at the same rate.

The forward and reverse processes balance each other out, so the total amount of dissolved salt in the water remains constant even as individual salt molecules continue to dissolve and precipitate. That's why the undissolved salt seems to be at a standstill at the bottom of the glass, even though the chemical reactions continue. This phenomenon demonstrates water's ability to dissolve substances up to a certain point, beyond which the excess material forms visible solid particles due to the lack of additional solvent capacity.

Smelting is a process of extracting a metal from its ore by heating it to a high temperature. It removes impurities, improves machinability, increases corrosion resistance, and improves electrical conductivity.

Smelting is a process of extracting a metal from its ore. It is a pyrometallurgical process, which means that it uses heat to separate the metal from the other materials in the ore. The smelting process typically involves the following steps:

The ore is crushed and ground into a fine powder.

The ore is mixed with a reducing agent, such as carbon or coke.

The mixture is heated in a furnace to a high temperature.

The reducing agent reacts with the oxygen in the ore, forming carbon monoxide or carbon dioxide.

The metal is released from the ore in its molten form.

The molten metal is poured off and allowed to cool.

Smelting is an important step in the processing of many metals, including iron, copper, aluminum, and lead. It allows us to extract pure metals from their ores, which can then be used to make a wide variety of products.

Here are some of the specific benefits of smelting for metals:

Removes impurities: Smelting removes impurities from metals, such as oxides, sulfides, and silicates. This results in a purer metal that is stronger and more durable.

Improves machinability: Smelting improves the machinability of metals. This means that they are easier to work with, such as cutting, machining, and forming.

Increases corrosion resistance: Smelting increases the corrosion resistance of metals. This means that they are less likely to rust or corrode, which makes them more durable.

Improves electrical conductivity: Smelting improves the electrical conductivity of metals. This makes them more suitable for use in electrical applications.

Overall, smelting is a very important process for the production of high-quality metals. It allows us to extract pure metals from their ores and improve their properties, such as strength, durability, machinability, and corrosion resistance.

For more such information on: smelting

https://brainly.com/question/15081389

#SPJ12

Answer:

The elements in the second, third, fourth and fifth periods that have the same number of electrons with the highest energy level that barium are beryllium (Be) magnesium (Mg), calcium (Ca ) and strontium (Sr).

Explanation:

The Electronic Configuration of the elements is the arrangement of all electrons of an element in energy levels and sub-levels (orbitals). The filling of these orbitals occurs in increasing order of energy, that is, from the orbitals of lower energy to those of higher energy.

There are 7 energy levels, numbered from 1 to 7, and in which electrons are distributed, logically in order according to their energy level. Electrons with less energy will be spinning at level 1.

Valencia electrons are the electrons found in the last electronic layer (called valence orbitals). This electrons allows to determine their location in the Periodic Table. All elements of the same group have the same number of valence electrons (This does not occur in transition metals). The valence electrons increase in number as one advances in a period. Then, at the beginning of the new period, the number decreases to one and begins to increase again.

So, in summary, those elements that belong to a group have the same number of electrons in their last or last layers, and the group number indicates the electronic configuration of their last layer, varying only the period of the element.

On the other hand, periods represent the energy levels that an atom has. That is, an element with five layers or energy levels will be in the fifth period.

Given this, the elements in the second, third, fourth and fifth periods that have the same number of electrons with the highest energy level that barium are beryllium (Be) magnesium (Mg), calcium (Ca ) and strontium (Sr). This is because they are in the same group (they have the same number of electrons in their last layer)

Answer:

b similar solubility in water

Explanation:

Chromatography is a quantitative technique, its general purpose being two uses, substance identification and separation-purification of mixtures. Using properties like solubility, size and mass. An important principle of this technique is that similar solubility in water must be present between the elements.

For the mixture separation process, the mixture goes through two phases, one stationary (fixed, being a porous material as a filter) and another mobile (such as a liquid or a gas, which helps in the separation of the mixture). constituents of these mixtures interact with the phases through intermolecular and ionic forces, making the separation. The mixture may be separated into several parts or further purified by eliminating undesirable substances.

Answer: Three lithium ions are required to bond with one nitrogen ion.

Explanation:

Ionic compound is formed by the complete transfer of electrons from 1 atom to another atom.

The atom which looses the electron is known as electropositive atom and the atom which gains the electron is known as electronegative atom. This bond is usually formed between a metal and a non-metal.

Lithium is the 3rd element of the periodic table having electronic configuration of [tex]1s^22s^1[/tex]

This element will loose 1 electron to form [tex]Li^+[/tex] ion

Nitrogen is the 7th element of the periodic table having electronic configuration of [tex]1s^22s^22p^3[/tex]

This element will gain 3 electrons to form [tex]N^{3-}[/tex] ion

To form an ionic compound of lithium and nitrogen atoms, three lithium ions are needed to neutralize the charge on 1 nitrogen atom.

The chemical compound formed will be [tex]Li_3N[/tex]

Hence, three lithium ions are required to bond with one nitrogen ion.

Answer:

dipole-dipole interactions

Explanation:

i said so :)

The molecular geometry of PF3 (Phosphorus trifluoride) is trigonal pyramidal and it is a polar molecule due to the electronegativity differences between phosphorus and fluorine atoms forming polar bonds.

The molecular geometry of the PF3 molecule is trigonal pyramidal. The PF3 molecule contains one phosphorus atom and three fluorine atoms. Phosphorus has 5 valence electrons and fluorine has 7, so the PF3 molecule has 26 valence electrons in total. The phosphorus is at the center of the molecule, with the three fluorine atoms and one lone pair of electrons surrounding it. As a result, the molecule has a 'pyramid' shape with the phosphorus at the top.

In terms of its polarity, PF3 is a polar molecule. This is because the difference in electronegativity between the phosphorus and fluorine atoms creates a polar bond. The three polar bonds form a net dipole moment, making the entire molecule polar.

https://brainly.com/question/30052851

#SPJ6

The molecular geometry of the PF3 molecule is trigonal pyramidal, and this molecule is polar.

The PF3 molecule, which is phosphorus trifluoride, has a central phosphorus atom surrounded by three fluorine atoms. According to the VSEPR model, we count the electron pairs around the central atom, recognizing that there are three bonding pairs and one lone pair. Considering this, PF3 does not have a trigonal planar structure like BF3, which has no lone pairs, but instead has a trigonal pyramidal geometry. The presence of the lone pair on the phosphorus atom pushes the fluorine atoms down, which creates a pyramid-like shape rather than a flat plane. In addition, due to the differences in electronegativity between the fluorine atoms and the phosphorus atom, and the asymmetric shape of the molecule, PF3 has a net dipole moment, meaning it is polar.

Here Magnesium is reacted with hydrochloric acid and the hydrogen evolved is collected at top. Hydrochloric acid will be present in a solution (HCl + Water). The solvent will be water. Due to evaporation some amount of water will have evaporated and would be present in vapour phase. Hence when the reaction occurs, only hydrogen will not be present in vaporphase but, will be accompanied by water vaporizes as well

Hence. Dalton's law the total pressure of the system will be sum of pressure exerted by hydrogen gas and pressure exerted by water vapours

Let partial pressure of hydrogen gas be "PH2"

The partial pressure of water will be nothing but the vapor pressure of water. 

Vapour pressure of water = Pwater = 19.8 mmHg;

Total pressure of the system = 746 mmHg;

Total pressure = PH2 + Pwater;

746 = PH2 + 19.8;

From above equation PH2 = 746-19.8 = 726.2 mmHg