Answer:
Time period
Explanation:
The time taken by a wave to complete one cycle is called the time period of a wave. It is denoted by T. The number of vibration per second is called the frequency of the wave.
The relation between the time period and the frequency is inverse i.e.
[tex]T=\dfrac{1}{\nu}[/tex]
If the number of vibrations increases its time period will decrease.
Similarly, for a simple pendulum the time period to complete one cycle is :
[tex]T=2\pi\sqrt{\dfrac{l}{g}}[/tex]
l and g are length of pendulum and acceleration due to gravity.
what exactly is the difference between a standing wave and destructive interference.
They seem to be the same thing apart from their outcomes.
Thank you for your time
If the core of a supernova contains about one solar mass, the core will become a
Answer:
It will become a neutron star
Explanation:
For the solar mass of anything above 1.4, the mass will automatically become a neutron star. This is according to the Chandrasekhar limit. This limit determines that 1 solar mass will collapse to form a white dwarf of a solar mass above 1.4 .
Which type of noise has sound at every frequency within the range of human hearing?
Answer:
Explanation:
Noise which falls under human hearing range means from 20 Hz to 20,000 hz has sound at every frequency. The audible range from human is 20-20,000 hz so every noise within this range is audible to humans. Some animals such as whale, dolphin, bat communicate( to get their prey) beyond this range.
Coral bleaching that occurs because of the introduction of foreign substances is _______.
What is the proper technique for anchoring?
A ufo was detected on the radar flying 7400 miles in 3 min, what is the estimated speed per hour?
Which of the following is a clue of a chemical change?
A. iron changes color when heated
B. gas bubbles form in boiling water
C. balls of wax form when melted wax is poured into ice water
D. a gas forms when vinegar and baking soda are mixed
If you lose __________, braking may cause the vehicle to steer left or right unpredictably.
Answer:
Steering control
Explanation:
If you lose Steering control , braking may cause the vehicle to steer left or right unpredictably. Steering is collection components and linkages that control the direction of wheel of vehicle on road. Once the steering control is lost , the driver is not able to guide the vehicle and on braking, the vehicle can move in any direction unpredictably.
Suppose you are asked to find the area of a rectangle that is 2.1cm wide by 5.6cm long. Your calculator answer would be 11.76cm^2. Now suppose you are asked to enter the answer to two significant figures.
A motorboat and a pwc are meeting head-on. which one is the stand-on vessel?
A motorboat and a PWC are meeting head-on, the stand-on vessel is generally the motorboat.
The motorboat is typically the stand-on vessel when a motorboat and a personal watercraft (PWC) collide head-on.
The vessel that has the right of way and must maintain its route and speed is referred to as the stand-on vessel. The PWC is the vessel that must surrender or give way.
The PWC should adjust its route or speed to safely pass behind or around the motorboat in order to avoid a collision.
It is crucial to remember that precise laws and guidelines could change depending on the jurisdiction and regional marine laws. It is usually advised to abide by the relevant laws and ordinances of the particular area or waterway.
Thus, the stand-on vessel is generally the motorboat.
For more details regarding PWC, visit:
https://brainly.com/question/27950348
#SPJ6
If a proton is released at the equator and falls toward earth under the influence of gravity, the magnetic force on the proton will be toward the ____ assuming the magnetic field is directed toward the north at this location.
The magnetic force on a proton falling towards Earth at the equator, with the Earth's magnetic field directed north, will be towards the west due to the right-hand rule for magnetic forces on charged particles.
Explanation:If a proton is released at the equator and falls towards Earth under the influence of gravity, and assuming the magnetic field is directed toward the north at this location, the magnetic force on the proton will be towards the west. This assertion is based on the right-hand rule for magnetic force, which states that if you point the fingers of your right hand in the direction of the proton's velocity (downward towards Earth), and bend your fingers in the direction of the magnetic field (north), your thumb will point in the direction of the magnetic force on a positively charged particle, which in this case is to the west.
This scenario exemplifies the interaction between charged particles and magnetic fields. The force on a charged particle moving through a magnetic field is always perpendicular to both the velocity of the particle and the magnetic field, which can result in circular or helical motion depending on the context.
how do you identify the number of valence electrons in an element using periodic table
Answer:
Sample Response: All elements in the same group of the periodic table have the same number of valence electrons. This made it possible to compare the valence of the alien elements to the valence of elements from our periodic table, and match the alien elements to the correct group. For example, our group 14 elements all have 4 valence electrons, so the alien element with 4 valence electrons had to be part of group 14 also.
Explanation:
What is the weight, in pounds, of a 255-kg object on jupiter? express the weight numerically in pounds?
The weight of a 255-kg object on Jupiter is approximately 1421.6 pounds, after converting kilograms to pounds and adjusting for Jupiter's greater gravitational force.
Explanation:To calculate the weight of a 255-kg object on Jupiter, we need to convert the mass in kilograms to pounds and then consider Jupiter's stronger gravitational pull. The weight calculation on Earth uses the conversion where 1 kg is equivalent to 2.205 pounds. However, since Jupiter's gravity is approximately 2.53 times that of Earth, we must multiply the Earth weight by this factor. Using the provided conversion factor, 255 kg on Earth is equivalent to 255 kg × 2.205 lb/kg which is approximately 561.975 lb. To find the weight on Jupiter, multiply this result by Jupiter's gravity factor: 561.975 lb × 2.53 = 1421.59725 lb. Considering significant figures based on the conversion factor of pounds and tenths place rounding, the weight would be reported as 1421.6 lb.
if a 25kg block is being suspended 3 meters in the air, what is the potenti energy
Which statement best explains why electricity should be conserved?
A. Fossil fuels generate electricity and are limited in supply.
B. Fossil fuels generate electricity and are exspensive.
C. Power plants use a lot of resources and never produce a lot of electricity
D. Power plants can use only one type of resource to produce electricity.
All vehicles are required to stop within how many feet of a railroad crossing when a train is approaching
The length of a sheet of U.S. standard (letter-size) paper is closest to
Answer:
I think is 8.5" x 11"
Explanation:
Wich group contains elements that are mostly likely to have similar properties
Which rf characteristic best determines the range of a 2.4 ghz ism signal?
What is the term for the disturbed water left behind as a boat moves through the water?
Answer:
Wake
Explanation:
As a boat moves through a water body (sea, river or ocean), the propeller causes the water to be separated as the boat moves. This separated water forms a new pattern based on the disturbance conferred by the boat. The disturbed water forms a visible huge flow of water sideways and backwards (based on the speed, size and weight of the boat). This disturbed water is referred to as the wake of the boat.
A force scale is attached to a stack of books lying on a flat table. 1.What happens to the size of the static frictional force as you begin to pull on the force scale? 2.What happens to the stack of the books if the applied force exceeds the maximum static frictional force? 3.What is the minimum size for the static frictional force, and under what conditions will the minimum static frictional force be observed? 4.What type of friction acts when the books are at rest but a force is exerted?
Static frictional force matches the applied force up to its maximum, after which the books slide, switching to kinetic friction. Minimum static friction is zero and occurs with no applied force. When resting books are subjected to a force below the static threshold, static friction acts.
Explanation:Frictional Forces and a Stack of Books
When you begin to pull on a force scale attached to a stack of books lying on a table, the size of the static frictional force initially increases to match the applied force, up to its maximum value. If the applied force exceeds this maximum static frictional force, the books will begin to slide across the table, transitioning to a state where kinetic friction is acting on them. The minimum size for the static frictional force is observed when there is no applied force, and in such cases, it is effectively zero. While the books are at rest and a force is exerted that is below the static friction threshold, the type of friction acting is still static friction.
If a 65-kg man undergoes a turning acceleration of 5 m/s2 during a running turn, what is the magnitude of force experienced by the foot due to the ground?
To turn while running, the foot must push off the ground, applying a cutting force while instantaneously supporting the weight of the body. This is a vector addition problem where we must account for the normal force on the foot (from the runner's weight) and the acceleration force. Since the weight of the foot is backing up is vertical and the turning force is horizontal, these two force vectors are perpendicular and will form a right triangle.
Only the magnitude matters, so we need not worry about the sign or angle direction.
Now, what's needed is the hypotenuse of a triangle with legs of
Fg = (65)(10) = 650 N and F = (65)(5) = 325 N.
This calculation can be approximated as √ (3002 + 7002) =
√ (90000+490000) = √ (580000) = √ (58 x 104) = √ (58) x 102 = 761
Answer:
Force, F = 715.11 newton
Explanation:
Given that,
Mass of the person, m = 65 kg
Acceleration of man during a running turn, [tex]a=5\ m/s^2[/tex]
We need to find the magnitude of force experienced by the foot due to the ground. It can be calculated using second law of motion as :
F = ma
[tex]F=65\ kg\times 5\ m/s^2[/tex]
F = 325 Newton
Here, the weight of the person and this force force a right angle triangle.
The wight of the person, W = mg
[tex]W=65\ kg\times 9.8\ m/s^2=637\ N[/tex]
So, the resultant for is, [tex]F_r=\sqrt{325^2+637^2}[/tex]
[tex]F_r=715.11\ N[/tex]
So, the f force experienced by the foot due to the ground is 715.11 newtons. Hence, this is the required solution.
How much force is needed to accelerate your body at a rate of 2 m/s2 if you weigh 45 kg?
If you hit another object with your vehicle, your _____ will be slowed or stopped by the force of impact caused by that object upon impact.
A laser used to dazzle the audience at a rock concert emits blue light with a wavelength of 463 nm . calculate the frequency of the light.
The wavelength of light is given as 463 nm or can also be written as 463 x 10^-9 m. [wavelength = ʎ]
We know that the speed of light is 299 792 458 m / s or approximately 3 x 10^8 m / s. [speed of light = c]
Given the two values, we can calculate for the frequence (f) using the formula:
f = c / ʎ
Substituting the given values:
f = (3 x 10^8 m / s) / 463 x 10^-9 m
f = 6.48 x 10^14 / s = 6.48 x 10^14 s^-1
f = 6.48 x 10^14 Hz
Final answer:
The frequency of blue light with a wavelength of 463 nm is calculated using the speed of light and the formula for frequency, resulting in a frequency of 6.48 × 10¹⁴Hz.
Explanation:
To calculate the frequency of blue light emitted by a laser at a rock concert with a wavelength of 463 nm, we use the formula c = λf, where c is the speed of light (3.00 × 108 m/s), λ is the wavelength in meters, and f is the frequency in Hertz (Hz).
First, convert the wavelength from nanometers to meters: 463 nm = 463 × 10-9 meters.
Next, plug the values into the formula: f = c / λ = (3.00 × 10⁸ m/s) / (463 × [tex]10^-^9[/tex] m) = 6.48 × 10¹⁴ Hz.
Therefore, the frequency of the blue light is 6.48 × 10¹⁴Hz.
What effect does heating a solid to a high temperature have on its crystal lattice?
The lattice breaks apart and the ions flow freely. Gradpoint answer
Alcohol begins to affect your brain when
Alcohol affects the brain shortly after consumption, with BAC being a key factor in the extent of these effects, which include impaired motor skills and judgment. Chronic consumption can lead to tolerance and withdrawal, and during pregnancy, there's a risk of FASD. The liver metabolizes alcohol steadily, unaffected by external remedies like coffee.
Explanation:Alcohol begins to affect your brain shortly after consumption, with effects ranging from social disinhibition to impaired motor control and decision-making. The immediate effects of alcohol on the brain depend on the individual's blood alcohol concentration (BAC), which is influenced by age, sex, health condition, and the quantity of alcohol consumed. Acute alcohol ingestion can result in decreased reaction time, visual acuity, alertness, and behavioral control, leading to consequences such as lack of coordination, blurred vision, and impaired judgment. It is worth noting that chronic exposure to alcohol may cause adaptations in the brain's reward circuitry, increased tolerance, and potential withdrawal effects. Additionally, alcohol consumption during pregnancy can lead to fetal alcohol spectrum disorder (FASD) or fetal alcohol syndrome (FAS), with their respective long-term effects on the child.
Alcohol metabolism is a critical aspect of managing intoxication. The liver metabolizes alcohol at a rate of about 3.3 mmol/L (15 mg/dL) per hour, and no amount of coffee or a cold shower can speed up this process. Therefore, to avoid alcohol toxicity and its associated risks – such as road accidents and physiological disorders – it is essential to drink responsibly and allow sufficient time for the body to metabolize alcohol.
Two particles are located on the x axis. particle 1 has a mass m and is at the origin. particle 2 has a mass 2m and is at x = +l. a third particle is placed between particles 1 and 2. where on the x axis should the third particle be located so that the magnitude of the gravitational force on both particle 1 and particle 2 doubles? express your answer in terms of l.
The solution would be like this for this specific problem:
The force on m is:
GMm / x^2 + Gm(2m) / L^2 = 2[Gm (2m) / L^2] ->
1
The force on 2m is:
GM(2m) / (L - x)^2 + Gm(2m) / L^2 = 2[Gm (2m) / L^2]
-> 2
From (1), you’ll get M = 2mx^2 / L^2 and from
(2) you get M = m(L - x)^2 / L^2
Since the Ms are the same, then
2mx^2 / L^2 = m(L - x)^2 / L^2
2x^2 = (L - x)^2
xsqrt2 = L - x
x(1 + sqrt2) = L
x = L / (sqrt2 + 1) From here, we rationalize.
x = L(sqrt2 - 1) / (sqrt2 + 1)(sqrt2 - 1)
x = L(sqrt2 - 1) / (2 - 1)
x = L(sqrt2 - 1)
= 0.414L
Therefore, the third particle should be located the 0.414L x axis so that the magnitude of the gravitational force on both particle 1 and particle 2 doubles.
Using Newton's law of universal gravitation, we can set up equations to find the location of the third particle such that the gravitational force exerted on both particle 1 and particle 2 doubles. The third particle should be placed at the position solved from these equations, either closer to particle 1 or further away.
Explanation:The location of the third particle that could double the gravitational force on both particle 1 and 2 can be achieved by using Newton's law of universal gravitation. This law states that every point mass attracts every other point mass by a force acting along the line intersecting the two points. The force is proportional to the product of the two masses and inversely proportional to the square of the distance between them.
For particle 1 and the third particle, if we denote the mass of the third particle as m3 and its position as x3, the gravitational force F1 on particle 1 is given by F1 = G*m*m3/x3^2. Similarly, for particle 2 and the third particle, the gravitational force F2 on particle 2 is also given by F2 = G*2m*m3/(l-x3)^2.
According to the question, both the gravitational force on particle 1 and particle 2 doubles when the third particle is added. Therefore, we can set up the following equations: 2F1 = G*m*m3/x3^2 and 2F2 = G*2m*m3/(l-x3)^2. From the equations, we could solve for x3 to find the location of the third particle.
Learn more about Gravitational Force here:https://brainly.com/question/32609171
#SPJ3
Which one of these foods must be cooked to at least 165°f?
a. ground beef
b. pork
c. vegetables
d. chicken?
Among the foods mentioned - ground beef, pork, vegetables, and chicken - chicken is the one that must be cooked to at least 165°F to safely consume and ensure all harmful bacteria have been killed.
Out of the foods listed - ground beef, pork, vegetables, and chicken - the one that must be cooked to at least 165°F (73.9°C) is chicken.
Poultry, including chicken, should be cooked to a minimum internal temperature of 165°F as recorded on a food thermometer, to kill off any harmful bacteria that may be present. The safe minimum cooking temperature for ground meat, such as ground beef and pork, is lower at 160°F. Vegetables can be eaten raw or cooked to any preferred temperature.
Learn more about Food Safety here:https://brainly.com/question/33878419
#SPJ6
If 3.5 paper clips = 1.0 pencils and your paper is 1.5 pencils long, how many paper clips long is your paper?
If 3.5 paper clips = 1.0 pencils and your paper is 1.5 pencils long, then your paper would be 5.25 paper clips long.
What is the scale factor?It is defined as the multiplication factor used for the design of an object with respect to some other object. the scale is generally used to design prototype designs of large objects. It is also used in interior design planning rooms.
It is multiplied by the design dimension to get the actual size of the object or product.
As given in the problem If 3.5 paper clips = 1.0 pencils and your paper is 1.5 pencils long, this means the scale factor of the pencil as a paper clip is 3.5
1 pencil = 3.5 paper clips
1.5 pencils = 1.5 × 3.5 paper clips
= 5.25 paper clips
Thus, If 3.5 paper clips = 1.0 pencils and your paper is 1.5 pencils long, then your paper would be 5.25 paper clips long.
learn more about scale factors from here
brainly.com/question/507867
#SPJ2