The molar mass of carbon dioxide is 44.0 g/mol. a mass of 150.0 grams of carbon dioxide is equivalent to how many moles?

A) 3.00 mol

B) 3.41 mol

C) 29.3 mol

D) 106 mol

The pH is the potential of Hydrogen is a scale that is used to specify the acidity. In the acidic solution of H+ ions, the scale is logarithmic and indicates the concentration of hydrogen ions in the solution.

Hence the option C that is hydronium ion concentration is correct.

Learn more about the solution's ph is a measure of what.

brainly.com/question/3106222.

oxygen (O) and chlorine (Cl)

As the electronegativity of an element increases It is more likely to make an ionic bond. e.g. the metallic elements. On the moderate values of electronegativity, elements tend to make covalent bond.

Oxygen and chlorine will make covalent bond because the electronegativity difference between these two elements is 0,5 so there bond will be covalent in nature.

The hydroxide ion concentration for a solution with a pH of 3.45 can be calculated as 10^-10.55 M.

The hydroxide ion concentration for an aqueous solution with a pH of 3.45 can be calculated using the formula [OH-] = 10-pOH. Since pH + pOH = 14, we can find that the pOH is 14 - 3.45 = 10.55. Therefore, the hydroxide ion concentration is 10-10.55 M.

https://brainly.com/question/4617925

#SPJ12

The hydroxide ion concentration for a solution with a pH of 3.45 is approximately 2.82 × [tex]10^{-11[/tex] M.

To calculate the hydroxide ion concentration for an aqueous solution with a pH of 3.45, we need to follow these steps:

The hydroxide ion concentration for the solution with a pH of 3.45 is approximately 2.82 × [tex]10^{-11[/tex] M.

Final answer:

The ratio of the frequency of effective collisions for a reaction at higher to lower temperature can be found using the Arrhenius equation, which illustrates that the reaction rate increases with temperature due to more molecules having sufficient energy to overcome the activation energy barrier.

Explanation:

The question revolves around the concept known as the Arrhenius equation, which describes how the rate of a chemical reaction is affected by changes in temperature and activation energy. The ratio 'f' represents the frequency of effective collisions leading to a reaction. The Arrhenius equation suggests that as temperature increases, the rate constant of the reaction also increases because a greater fraction of molecules will have the necessary energy to overcome the activation energy barrier.

To calculate the ratio of the frequency of effective collisions at two different temperatures for a reaction with an activation energy (Ea) of 205 kJ/mol, we use the Arrhenius equation:

K = Ae-(Ea/RT)

Where K is the rate constant, A is the frequency factor, Ea is the activation energy, R is the gas constant (8.314 J/mol K), and T is the temperature in kelvins. By taking the ratio of the rate constants at 505 K and 485 K (K2/K1), we can find the ratio of 'f' at the higher temperature to the lower temperature.

The analysis of the change in reaction mechanism with temperature typically shows that, as seen with a reaction with a lower activation energy of 54 kJ/mol, a temperature increase, even by 10 degrees Celsius, can significantly impact the reaction rate, often doubling it. While the exact ratio of 'f' would require computation, the concept remains that the reaction rate will increase with temperature due to the exponential factor in the Arrhenius equation.

The kc is a representation of how fast the reaction proceeds to their products when it has achieved equilibrium. The activation energy for the forward and the one for the reverse reaction are similar because they attained chemical equilibrium. A chemical equilibrium happens when both of the reactant and products achieve the same concentration. An example is the process of melting and freezing. Melting and freezing for a given substance occurs at the same temperature. Because the temperature at which the solid starts to melt is also the temperature at which the liquid starts to freeze. They are at chemical equilibrium.

Correctly balancing a chemical equation involves adding coefficients to ensure the number of atoms for each element is equal on both sides. As the given equation has a typo, a general method for balancing equations and an example with sodium and chlorine was described.

The question asks about balancing a particular chemical equation to find the coefficient of NaI. However, the given equation seems to have a typographical error and is not complete. In the context of this question, let's address a general approach on how to balance a chemical equation:

Write down the unbalanced equation.

Determine the number of atoms of each element in the reactants and products.

Adjust coefficients (not subscripts) to get the same number of atoms of each element on both sides.

Repeat steps until all elements are balanced.

Check to ensure that the total charge is the same on both sides if the equation includes ionic species.

For example, the equation for the reaction of sodium (Na) with chlorine gas (Cl2) to form sodium chloride (NaCl) is balanced by placing a '2' in front of Na and NaCl:

2 Na (s) + Cl₂ (g) → 2 NaCl (s)

In this balanced equation, we see that the number of sodium and chlorine atoms are equal on both sides, confirming that the equation is correctly balanced.

To find the number of moles of silver atoms in the silver ring, divide the number of particles by Avogadro's number.

To find the number of moles of silver atoms in the silver ring, we can use Avogadro's number. Avogadro's number tells us that 1 mole of any substance contains 6.022 x 10^23 particles. In this case, we are given that the silver ring contains 5.15 x 10^22 silver atoms. We can use the following equation:

Number of moles = Number of particles / Avogadro's number

Substituting the given values, we get:

Number of moles = 5.15 x 10^22 silver atoms / (6.022 x 10^23 atoms/mol) ≈ 0.0855 mol ≈ 0.086 mol (rounded to two significant figures)

https://brainly.com/question/12160954

#SPJ2

1.5625.10²⁰ electrons are flowing through this device in 5 s

Electric current is the amount of electric charge that flows each unit of time

Electric current can also be a ratio between voltage and resistance

Electric current occurs due to the movement of electrons due to the difference in potential or voltage (from high potential to low potential) between two points

Electrons will flow through the conducting wire that functions as a conductor

The electric current itself can be divided into direct current (DC) or alternating current (AC)

Can be formulated:

[tex]{\displaystyle I = {\frac {Q} {t}},}[/tex]

Where

I is the electric current, Ampere (A)

Q is the electric charge, coulomb (C)

t is time, seconds (s)

An electric device delivers a current of 5 A within 5 s, so the charge is:

Q = I x t

Q = 5 x 5

Q = 25 C

Because 1 electron (e) has a charge of 1.60 × 10⁻¹⁹ C, so the total number of electrons flowing:

= 25 C: 1.60 × 10⁻¹⁹ C

= 15.625.10¹⁹

= 1.5625.10²⁰ e

electric field

https://brainly.com/question/2080732

magnetism

https://brainly.com/question/10809295

2.0x10 ^ 20 electrons to pass through a point

https://brainly.com/question/334342

Keywords: electric current, electric charge, electrons, coulombs, amperes, seconds

Solid solutions are formed only by solutes and solid solvents. In everyday life, the main examples of this type of solution are metallic alloys.

2) Liquid Solutions

Liquid solutions have liquid solvent, usually water, and solutes can be solid, liquid or gaseous.

3) Gaseous solutions

This kind of solution is formed by the only mixture of gases. Air is an example, as its approximate composition is 78% nitrogen gas, 21% oxygen gas and 1% of other gases.

Answer:

[tex]S_2O_3[/tex]

Explanation:

Hello,

Nomenclature, is a powerful tool in chemistry to name chemical compounds to successfully distinguish among the thousands and thousands of existing molecular compounds. In rule to stipulate a chemical name y is via specifying the amount of the composing elements into the molecule, thus, the prefix di, accounts for two atoms and the prefix tri for three (this is related with the valence electrons the element has), in such a way, disulfur trioxide is represented with two sulfur atoms and three oxygen atoms, this is:

[tex]S_2O_3[/tex]

Which would be a novel molecule since the sulfur has been reported to have +2,+4 and +6 as the positive oxidation states which are possible to dovetail with oxygen as it is negative.

Kind regards.

To find the density of the nitrogen gas, we use the equation of state for ideal gases, PV=nRT and rearrange it to find Volume. We also calculate the mass of gas using the number of moles and molar mass. Finally, we get the density of nitrogen gas as 1.4 g/L.

To find the mass density of this nitrogen gas, we will use the equation of state for ideal gases given as PV=nRT. Where:

First, we rearrange the equation to solve for V (Volume): V = nRT/P. Substituting the given values, we find that volume V = (0.020 mol)(0.0821 l·atm/mol·K)(290 K) / 1.5 atm =  0.40 L.

Now, we compute the mass of the nitrogen gas. We know that the molar mass of molecular nitrogen N₂ is 28.01 g/mol, so the mass m of the gas is m = n*M = (0.020 mol)(28.01 g/mol) = 0.56 g.

Finally to get the density we take Density (ρ) = mass/volume = 0.56 g / 0.40 L = 1.4 g/L.

https://brainly.com/question/33709774

#SPJ3

The hydroxide ion concentration in the solution is calculated to be 2.857 × 10^-11 M using the ion product of water (Kw) and the given hydronium ion concentration.

To calculate the hydroxide ion concentration in an aqueous solution that contains 3.50 Ã 10^-4 M in hydronium ion, you can use the relationship between the hydronium ion [H3O+] and hydroxide ion [OH-] concentrations in water which is known as the ion product of water (Kw).

At 25°C the ion product of water, Kw is 1.0 × 10-14 M^2. These ions are related through the equation [H3O+][OH-]= Kw, which is the mathematical representation of the ion product of water at a particular temperature.

Substitute the given hydronium ion concentration into the equation to calculate the hydroxide ion concentration: [OH-] = Kw / [H3O+]. So, [OH-] = (1.0 × 10-14 M^2) / (3.50 × 10^-4 M) = 2.857 × 10^-11 M. So, the hydroxide ion concentration in the solution is 2.857 × 10^-11 M.

https://brainly.com/question/4617925

#SPJ11

When a compound containing c, h, and o is completely combusted in air, the reactant besides the hydrocarbon that is involved in the reaction is, O2(g).

Hydrocarbons burn in air to form water and carbon dioxide as the only products.

That is;

For hydrocarbons with carbon and hydrogen

For the compound containing carbon, hydrogen and oxygen  

Examples  

Propane which is an alkane burns in air to form water and mineral salt.

C3H8(g) + O2(g) = CO2(g) + H2O(l)

Ethanol is a hydrocarbon in the homologous series of alcohols. It burns in air to form carbon(IV)oxide and water.

C2H5OH(l) + 3O2(g) = 2CO2(g) + 3H2O(l)

Keywords: Combustion, hydrocarbons  

Level: High school

Subject: Chemistry  

Topic: Organic chemistry  

Sub-topic: Combustion of hydrocarbons

Answer:

B. It allows scientists to predict things about objects that are too small to see.

Explanation:

Hello,

In science, we're always looking for the study of tinier things as long as we're interested about what the matter is made of. Several atomic models such as Bohr's, Rutherford's, Dalton's and the actual one have been proposed in order for us to understand how the protons, neutrons and electrons are assembled into the atom because they are too small to see (about 0.5 fm) thus, with that better understanding, we can research and develop novel applications for new materials based on the micromolecular behavior of the atom.

Best regards.

To find the grams of phosphorus that contain the same number of molecules as 7.88 g of sulfur, use the concept of molar mass and Avogadro's number.

To determine the grams of phosphorus that contain the same number of molecules as 7.88 g of sulfur, we need to use the concept of molar mass and Avogadro's number. First, we calculate the number of moles of sulfur by dividing its mass by its molar mass. Then, we use the molar ratio between sulfur and phosphorus from their molecular formulas to calculate the number of moles of phosphorus. Finally, we multiply the number of moles of phosphorus by its molar mass to obtain the grams of phosphorus.

Step 1: Calculate the moles of sulfur:

moles of sulfur = mass of sulfur / molar mass of sulfur

Step 2: Calculate the moles of phosphorus:

moles of phosphorus = moles of sulfur × (molar ratio of phosphorus/sulfur)

Step 3: Calculate the grams of phosphorus:

grams of phosphorus = moles of phosphorus × molar mass of phosphorus

After performing these calculations using the given values, the grams of phosphorus that contain the same number of molecules as 7.88 g of sulfur is obtained.

https://brainly.com/question/30340401

#SPJ11

The number of molecules of carbon dioxide present in 243.6 g of carbon dioxide is 3.33 × 10²⁴ molecules

From the question,

We are to determine the number of molecules of carbon dioxide that are in 243.6g of carbon dioxide

First, we will determine the number of moles of carbon dioxide present

Using the formula,

[tex]Number\ of\ moles\ = \frac{Mass}{Molar\ mass}[/tex]

Molar mass of carbon dioxide = 44.01 g/mol

Number of moles of carbon dioxide = [tex]\frac{243.6}{44.01}[/tex]

Number of moles of carbon dioxide = 5.5351 moles

Now, for the number of molecules,

Using the formula,

Number of molecules = Number of moles × Avogadro's constant

Number of molecules = 5.5351 × 6.022 × 10²³

Number of molecules of carbon dioxide = 3.33 × 10²⁴ molecules

Hence, the number of molecules of carbon dioxide present in 243.6 g of carbon dioxide is 3.33 × 10²⁴ molecules

Learn more on calculating number of molecules here: https://brainly.com/question/14464650

Answer: New pH will be 4.06 .

Explanation: The problem could easily be solved using Handerson equation. Handerson equaton is used to calculate the pH of buffer solution.

[tex]pH=pK_a+log(\frac{base}{acid})[/tex]

For the given problem, the buffer solution is a mixture of a weak acid(benzoic acid) and a salt of it, known as conjugate base(sodium benzoate).

When a strong acid is added to the buffer solution then it reacts with the base(benzoate ion) present in the buffer solution and produce a the weak acid(benzoic acid).

The reaction could be shown as:

[tex]C_6H_5COO^-(aq)+H^+(aq)\rightleftharpoons C_6H_5COOH(aq)[/tex]

First of all we calculate the initial moles of acid and base originally present in the buffer solution and for this the volume is multiplied by the molarity.

initial moles of benzoic acid = [tex]0.250L(\frac{0.250mol}{1L})[/tex]

= 0.0625 moles

initial moles of benzoate ion = [tex]0.250L(\frac{0.20mol}{1L})[/tex]

= 0.0500 moles

moles of HCl or [tex]H^+[/tex] added to the buffer = [tex]25.0mL(\frac{1L}{1000mL})(\frac{0.100mol}{1L})[/tex]

= 0.0025 moles

From the equation we have written above, HCl and benzoate ion react in 1:1 mol ratio. As HCl is limiting reactant, 0.0025 moles of it will react with exactly 0.0025 moles of benzoate ion and form 0.0025 moles of benzoic acid.

So, the moles of benzoic acid after addtion of HCl = 0.0625 + 0.0025 = 0.065 moles

moles of benzoate ion after addition of HCl = 0.0500 - 0.0025 = 0.0475 moles

Total volume of the solution = 0.250 L + 0.025 L = 0.275 L

concentration of benzoic acid = [tex]\frac{0.065mol}{0.275L}[/tex]

= 0.236M

concentration of benzoate ion = [tex]\frac{0.0475mol}{0.275L}[/tex]

= 0.173M

Pka is calcuulated from the given Ka value as:

[tex]pK_a=-logK_a[/tex]

[tex]pk_a=-log(6.5*10^-^5)[/tex]

[tex]pK_a[/tex] = 4.19

Let's plug in the values in the Handerson equation:

[tex]pH=4.19+log(\frac{0.173}{0.236})[/tex]

pH = 4.19 - 0.13

pH = 4.06

So, the pH of the solution after an addition of HCl will be 4.06 .

The correct option is A.

Metals have certain characteristics properties, they include the following: they are ductile, malleable, shiny, hard, lustrous, flexible and they are good conductor of heat and electricity. The malleability of metals refers to their ability to withstand bending and hammering without breaking. Metals are not dull, neither are they brittle, those are the properties of non metals.

Answer : The correct statement is, (A) they are shiny and bend without breaking

Explanation :

Metals : Metals are the elements that easily loose electrons and forms cations.

The properties of the metals :

Non-metals : Non-metals are the elements that easily gain electrons to form an anion.

The properties of the non-metals :

Hence, the best statement is, (A) they are shiny and bend without breaking

Final answer:

To calculate the pH at different points in the titration of HCl with NaOH, you need to consider the moles of reactants and products and use the Henderson-Hasselbalch equation.

Explanation:

In a titration of 25.00 mL of 0.150 M HCl with 0.250 M NaOH, the pH can be calculated at different points:

(a) When neutralization is 50% complete, we can assume that half of the HCl has reacted with NaOH. This means that the moles of HCl neutralized is half of the initial moles present. Use this information to calculate the moles of NaOH consumed and the remaining HCl. From there, you can use the Henderson-Hasselbalch equation to calculate the pH.

(b) When 1.00 mL of NaOH is added beyond the equivalence point, you can assume that all of the HCl has been neutralized and there is excess NaOH. Calculate the moles of NaOH consumed based on the volume added and use it to determine the concentration of NaOH remaining. Then, use the concentration of NaOH and the hydroxide ion concentration to calculate the pH.

Final answer:

The reactivity of marble increases with temperature due to the enlargement of calcite crystals and the recrystallization of the rock. Increased temperature can lead to a faster chemical reaction rate, especially with powdered marble, which has a larger surface area exposed for reactions.

Explanation:

As temperature increases, the reactivity of marble will also increase. Marble is comprised mainly of calcite, which is altered under heat or pressure to form calcium carbonate. When marble is exposed to high temperatures, such as around 400°C, and various confining pressures, its calcite crystals tend to grow larger and the rock recrystallizes, essentially transforming the limestone base into a denser and typically white rock, often with colorful markings due to impurities.

Moreover, the reaction rate with marble in chemical processes can be influenced by temperature and the physical form of the marble. For instance, powdered marble, with its increased surface area, reacts faster than larger marble chips. The smaller the marble particles, the more surface molecules are exposed, facilitating a quicker reaction when the temperature is raised.

Thus, in contexts such as artistic sculpting or architectural use, where marble's durability and aesthetic qualities are prized, understanding the impact of temperature on its reactivity and structure is crucial.