Answer:
The car is parked.
The car is moving at a fixed speed and direction.
Explanation:
The car is either at rest, or traveling at a constant velocity.
Hope this helps. Good luck!
On a planimetric map, the _____ is used to determine the actual distance between two points.
The answer in this question is scale. The scale is used to determine the actual distance between two points in a planimetric map. This map only represents the horizontal position of features. This is also called by others as the line map. This is usually consisted of man-made and natural features. These are from aerial shots by the use of modern technology. This map’s common features are street and water centerlines, sidewalks, culverts, utility lines, building footprints and vegetation. Sometimes, there are also other useful data attached in this map like titles of the properties, owner, assessed value, etc. It is because of these, this map becomes a storage of valuable data which can be easily and quickly accessed.
The scale on a planimetric map is used to determine the actual distance between two points by converting measured map distances to real-world distances.
Explanation:On a planimetric map, the scale is used to determine the actual distance between two points. By measuring the distance between two points on the map with a ruler and then using the map scale to find the real distance on the land surface, it is possible to convert map distances to real-world distances. For example, if you measure 10 centimeters between two points on a map with a scale of 1:10,000, you multiply the measured distance by the scale factor, resulting in an actual distance of 100,000 centimeters on the Earth's surface.
It is important to note that large-scale maps, like a standard topographic map, typically have less distance distortion, making it easier to measure straight line distances. However, when measuring distances along curved features, techniques such as using multiple straight-line segments or tools like an opisometer may be employed for greater accuracy. Map scales can be complex, as they can vary with latitude due to the Earth's curvature, particularly on maps that cover large areas such as equidistant projections which are true-to-scale only along meridians.
A constant force of f = 47i + 30j moves an object along a vector d = 13i - 8j, where units are in pounds and feet. find the work done.
Answer:
The work is 371 lb ft
Explanation:
The work can be calculated with yhe scalar product between the force and the displacement:
[tex] W = F.d [/tex]
The scalar product is obtained multiplying component to comoponent and summing the terms:
[tex] W [/tex] = <47, 30> · <13, -8> [lb ft]
[tex] W [/tex] = 47*13 + 30*(-8) [lb ft]
Finally:
W = 371 [lb ft]
What happens to the brightness of bulb a when the switch is closed and bulb b lights up?
There is a pattern of current flow. Based on the above scenario, Option b is the correct answer as bulb B will be brighter than before (Image attached).
What does this implies?Based on the current flowing through bulb A is said to remains the same in both scenario. It is the current through bulb B that changes when the switch are said to be closed.
There is something that happens to the brightness of a bulb when the switch is said to be closed. Note that when the switch is closed, the light bulb often operates because of the current flows via the circuit. The bulb (B) tends to glows at its full brightness because it receives more volts.
Learn more about Bulbs from
https://brainly.com/question/6874257
Particles in which state are close together, yet free to move around one another?
What is the problem with using your boat's engine to drive it onto a trailer?
Driving your boat with its engine onto a trailer can cause uncontrollable movement, potential damage, erosion of the launch area, and dangerous propeller strikes.
Explanation:There are several problems related to using your boat's engine to drive it onto a trailer. Firstly, the propellers of the boat create a turbulent water flow that will provide thrust in an uncontrolled manner, likely leading to imprecise movement and potential damage to either the boat or the trailer. Moreover, the propeller wash can cause erosion and possibly damage the launching area. Secondly, using the engine to drive onto the trailer may lead to prop strike, where the boat's propeller might come into contact with the ramp, causing significant damage to the motor.
Learn more about Boating Safety here:https://brainly.com/question/25329390
A landscaper is making a retaining wall to shore up the side of a hill. to ensure against collapse, the wall should make an angle 75° with the ground. how far from the base of the hill is the base of a 15-foot slanted wall?
Final answer:
To determine how far the base of a 15-foot slanted retaining wall is from the base of a hill, we can use the cosine of the angle (75°) the wall makes with the ground. The calculation shows the base of the wall is approximately 3.88 feet from the hill's base.
Explanation:
To find out how far the base of a 15-foot slanted wall, which is supposed to shore up the side of a hill at a 75° angle with the ground, is from the base of the hill, we can use trigonometry. Specifically, we can use the cosine function which is defined in a right-angled triangle as the adjacent side (base) over the hypotenuse (the slanted wall). The angle given is 75° and the length of the slanted wall (hypotenuse) is 15 feet.
Thus, the formula to calculate the distance from the base of the hill (base of the wall) is:
Cos(75°) = Base / 15 feet
Rearranging the formula to solve for the base gives:
Base = 15 feet × Cos(75°)
Using a calculator, Cos(75°) is approximately 0.2588. Therefore:
Base ≈ 15 feet × 0.2588 ≈ 3.882 feet
This means the base of the wall is approximately 3.88 feet from the base of the hill.
Steve and Carl are driving from Scranton to Bridgeport, a distance of 180 miles. If their speed averages 60 miles an hour, how long will it take them to get there? A. 3.5 hours B. 2.5 hours C. 4 hours D. 3 hours
A car initially moving at 9 m/s begins accelerating at its maximum acceleration of 4 m/s2. if the car maintains this acceleration, how much time will it take to cover 200 m?
A motorist drives along a straight road at a constant speed of 15.0 m/s. Just as she passes a parked motorcycle police offi cer, the offi cer starts to accelerate at 2.00 m/s2 to overtake her. Assuming that the offi cer maintains this acceleration, (a) determine the time interval required for the police offi cer to reach the motorist. Find (b) the speed and (c) the total displacement of the offi cer as he overtakes the motorist.
Answer:
a) The time the police officer required to reach the motorist was 15 s.
b) The speed of the officer at the moment she overtakes the motorist is 30 m/s
c) The total distance traveled by the officer was 225 m.
Explanation:
The equations for the position and velocity of an object moving in a straight line are as follows:
x = x0 + v0 · t + 1/2 · a · t²
v = v0 + a · t
Where:
x = position at time t
x0 = initial position
v0 = initial velocity
t = time
a = acceleration
v = velocity at time t
a)When the officer reaches the motorist, the position of the motorist is the same as the position of the officer:
x motorist = x officer
Using the equation for the position:
x motirist = x0 + v · t (since a = 0).
x officer = x0 + v0 · t + 1/2 · a · t²
Let´s place our frame of reference at the point where the officer starts following the motorist so that x0 = 0 for both:
x motorist = x officer
x0 + v · t = x0 + v0 · t + 1/2 · a · t² (the officer starts form rest, then, v0 = 0)
v · t = 1/2 · a · t²
Solving for t:
2 v/a = t
t = 2 · 15.0 m/s/ 2.00 m/s² = 15 s
The time the police officer required to reach the motorist was 15 s.
b) Now, we can calculate the speed of the officer using the time calculated in a) and the equation for velocity:
v = v0 + a · t
v = 0 m/s + 2.00 m/s² · 15 s
v = 30 m/s
The speed of the officer at the moment she overtakes the motorist is 30 m/s
c) Using the equation for the position, we can find the traveled distance in 15 s:
x = x0 + v0 · t + 1/2 · a · t²
x = 1/2 · 2.00 m/s² · (15s)² = 225 m
A boat can travel 48 miles upstream in 4 hours. the return trip takes 3 hours. find the speed of the boat in still water and the speed of the current.
Scientists think that the __________, made of liquid iron and nickel, moves to produce Earth’s magnetic field. a. crust b. mantle c. outer core d. inner core Please select the best answer from the choices provided
outer core is your answer
Answer:
c. outer core
Explanation:
The inner core of the Earth is solid and contains iron. The outer core is in molten state and contains iron and nickel in liquid state. As the Earth spins, the domains of this magnetic material aligned in single direction generating huge magnetic field. Thus, earth acts like an enormous bar magnet.
Correct option is c. outer core.