The products of the neutralization reaction between hydrochloride acid and magnesium hydroxide are

In the given reaction, the reactant acid is NH4+ (ammonium ion) and its conjugate base is NH3 (ammonia).

In the reaction CH3COO- + NH4+ → CH3COOH + NH3, the reactant acid is NH4+ (ammonium ion) and its conjugate base is NH3 (ammonia). The proton donor or acid in the reactants is NH4+ as it loses a proton to become its conjugate base, NH3. On the other side, CH3COO- (acetate ion) gains a proton in the reaction to form CH3COOH (acetic acid), so CH3COO- is the conjugate base and CH3COOH is its corresponding acid in the reaction.

When identifying acids and bases in such reactions, one should look for the species that donates a proton and the species that accepts a proton. The donor is the acid and after donating a proton it becomes the conjugate base. Similarly, the acceptor is initially a base and becomes the conjugate acid after accepting a proton.

Answer:

21 kJ  

Step-by-step explanation:

The formula for the heat q is

q = mCΔT

Data:

m = 200 g; C = 4.184 J·°C⁻¹g⁻¹

T₁ = 50. °C; T₂ = 25 °C

Calculations:

ΔT = T₂ - T₁

ΔT = 25 – 50.

ΔT = -25 °C

q = 200 × 4.184 × (-25)

q = -21 000 J     Convert to kilojoules

q = -21 kJ

The negative sign shows that energy is released, so the water has released 21 kJ of energy.

The statements 'An object can have only one type of energy at a time' and 'If an object has energy, it must be moving' are false. An object can possess more than one type of energy and doesn't necessarily need to be moving to contain energy. The statement 'All energy travels in waves' is not universally true as it does not apply to all types of energy.

The statements provided for evaluation are related to the concepts of energy and its properties. To answer these, we need to understand that energy manifests in different forms and an object can possess more than one type of energy at a time. Notably, the type of energy depends on the state of the object. For example, a ball held at a certain height has potential energy, yet when it falls and is in motion, it also has kinetic energy.

Firstly, the statement 'An object can have only one type of energy at a time' is false. As mentioned earlier, an object can possess both potential and kinetic energy, among other types.

Secondly, 'If an object has energy, it must be moving' is also false. An object does not have to be in motion to possess energy. For instance, a charged battery has electrical energy stored even though it is at rest.

Lastly, the statement 'All energy travels in waves' is not entirely true. While it's true for electromagnetic radiation like light and sound energy, it's not the case for potential or kinetic energy.

https://brainly.com/question/34138894

#SPJ2

Answer : The correct option is, (D)

Explanation :

Balanced reaction : Balanced reactions are those reactions when the number of different atoms of the element present in the reactant sides is equal to the product sides.

The given unbalanced reaction is,

[tex]Zn+K_2CrO_4\rightarrow K+ZnCrO_4[/tex]

The balanced chemical reaction is,

[tex]Zn+K_2CrO_4\rightarrow 2K+ZnCrO_4[/tex]

Therefore, 1, 1, 2, 1 are the coefficients that would correctly balance this equation.

To balance the chemical equation Zn + K2CrO4 > K + ZnCrO4, the correct coefficients should be: 1 Zn, 1 K2CrO4, 2 K, and 1 ZnCrO4. Therefore, the answer is D. 1,1,2,1.

The balancing of chemical equations involves ensuring that there is an equal number of each type of atom on both sides of the reaction. This equality is fundamental to the Law of Conservation of Mass. In case of the equation Zn + K2CrO4 > K + ZnCrO4, here's how you balance the equation:

Therefore, the correct coefficients are: 1 Zn, 1 K2CrO4, 2 K, and 1 ZnCrO4, so the choice D. 1,1,2,1 is the correct one.

https://brainly.com/question/28294176

#SPJ11

A earthquakes because the plates will suddenly shift quickly or gring quickly causing the ground to move because of the tectonic plates.

The correct answer is A.Earthquakes. Hope it helps!!

the mass of ice taken = 10 g

the mass of water = 250 g

initial temperature of water = 20 C

the final temperature of water = 16. 8 C

specific heat of water = 4.18 J/g*K

the heat absorbed by ice to melt = heat loss by water

heat loss by water = mass X specific heat of water X change in temperature

heat loss by water = 250 X 4.18 X (20-16.8) = 3344 Joules

heat gained by ice = 3344 J

heat gained by ice = enthalpy of fusion X moles of ice

moles of ice = mass / molar mass = 10 / 18 = 0.56 moles

enthalpy of fusion = 3344 / 0.56 = 5971.43 J / mole

Answer:

5.25 g NaF  

Step-by-step explanation:

We know we will need a balanced equation with masses and molar masses, so let’s gather all the information in one place.  

M_r:           41.99

               Na₂SiO₃ + 8HF ⟶ H₂SiF₆ + 2 NaF + 3H₂O

n/mol:                         8  

(1) Calculate the moles of NaF

The molar ratio is 2 mol NaF/8 mol HF.

Moles of F = 0.500 mol HF × (2 mol Na₂SiO₃/8 mol HF)

Moles of Na₂SiO₃ = 0.125 mol Na₂SiO₃

(2) Calculate the mass of NaF

Mass of NaF = 0.125 mol NaF × (41.99 g Na₂SiO₃/1 mol Na₂SiO₃)

Mass of NaF = 5.25 g NaF

Final answer:

During a flood, the water table rises, causing the zone of saturation to expand and the zone of aeration to diminish as the subsurface becomes increasingly waterlogged, which can have varying impacts on the ecosystem.

Explanation:

During a flood, the water table, zone of saturation, and zone of aeration undergo significant changes. The water table is the boundary between the zone of saturation, where the pore spaces in the ground are fully saturated with water, and the zone of aeration, where the pores are mainly filled with air. When a flood occurs, excessive rainwater and overflowing water bodies lead to an increase in ground saturation, causing the water table to rise temporarily. In such circumstances, the zone of saturation expands while the zone of aeration diminishes because more of the subsurface becomes waterlogged.

Flooding can also have various effects on the surrounding ecosystems and landscape. Sudden changes in water table levels can lead to soil saturation, impacting plant survival and depending on their adaptations to waterlogged conditions. Ecosystems dependent on stable groundwater levels, such as riparian areas near rivers, may experience stress or damage from the altered hydrological dynamics caused by flooding.

Answer:

The weights of all elements are always compared to the Carbon-12.

Explanation:

The weights of all elements are always compared to the Carbon-12 because the mass of carbon is 12 which is the exactly the sum of protons and neutrons.  

Oxygen was also considered the standard for some time but later this stander was rejected because in natural O¹⁷ and O¹⁸ were also present and this create the two different atomic mass tables.

AMU:

Atomic mass unit is define as the 1/12 the mass of an atom of carbon-12.

C12 has six neutron and six protons in the nucleus.

This unit is used to express the masses of atoms. We know that masses of atoms are very small and we do not have any such type of balance that can measure very small quantity. So that is way we use this scale to measure small quantity. For example, according to this scale

relative atomic mass of hydrogen is 1.008 amu

relative atomic mass of oxygen is 15.999 amu

relative atomic mass of uranium is 238.0289 amu

relative atomic mass of chlorine is 35.453 amu

Atomic weights are based on relative masses of atoms, with oxygen historically used as a standard. For instance, water's fixed composition reflects a constant ratio between hydrogen and oxygen, echoing the consistency and importance of atomic weights in chemistry.

The weights of all elements are defined relative to the atomic mass of other elements, and historically, oxygen was commonly used as the standard for comparison. Oxygen has an atomic weight of 16, which means if you compare it to hydrogen (the lightest element with an atomic weight close to 1), the ratio is 16:1. This is consistent with the Law of Multiple Proportions, where elements combine in simple whole number ratios.

For example, in water (H₂O), oxygen accounts for about 88.8% of the mass, and hydrogen about 11.2%, irrespective of the water's source or method of preparation. These percentages reflect the fixed mass ratio in which hydrogen and oxygen combine to form water, demonstrating the consistency in atomic weights and the fixed nature of chemical compounds.

Atomic weights are determined through experiments and calculations and provide a basis for the quantification in chemical reactions. Precise measurements and experimental uncertainties limit the precision of these values, typically to four significant figures. Atomic weight is crucial for understanding the composition of molecules and for converting between masses of substances and moles during chemical calculations.

AlF3 is ionic due to the metal and non metal combination. Well AlCl3 also has the same combination but the difference in electronegativity between Al and Cl is very minute causing Al to assume a covalent character. ... Electronegativity is the tendency of an atom to attract a bonding pair of electrons to itself.

The net force acting on the object and the mass of the object affect the acceleration of an object. Therefore, option (D) is correct.

Acceleration of an object can be described as the change in the velocity of an object with respect to time. The acceleration of a body is a vector quantity carry both magnitude and direction. Acceleration is also defined as the second derivative of the position of the object w.r.t. time and the first derivative of the velocity of an object w.r.t. time taken.

According to Newton's second law, the force acting is equal to the multiplication of the mass and acceleration of an object.

F = ma

And,   a = F/m

Therefore, acceleration (a) is inversely proportional to the mass (m) of the body and directly proportional to the applied force.

Therefore, the mass of the object and net acting force affects the acceleration of an object.

Learn more about acceleration, here:

brainly.com/question/3046924

#SPJ3

When the sun, moon, and Earth are in alignment (at the time of the new or full moon), the solar tide has an additive effect on the lunar tide, creating extra-high high tides, and very low, low tides—both commonly called spring tide

High tides occur during spring tides when the Sun, Earth, and Moon are aligned, either during new or full moon phases. Low tides occur during neap tides when the Sun and Moon are at right angles with respect to the Earth, typically during the moon's first and third quarters.

Tides are mostly affected by the gravitational pull of the Moon and the Sun on Earth's oceans. High tides, known as spring tides, occur when the Sun, Earth, and Moon are in a straight line. This alignment can happen during the new moon or full moon phases.

Conversely, low tides, referred to as neap tides, occur when the gravitational forces of the Sun and the Moon are perpendicular to each other, which takes place during the first and third quarters of the Moon's phases.

During spring tides, the gravitational forces of the Sun and the Moon combine to create higher-than-average high tides and lower-than-average low tides. During neap tides, the Sun and the Moon's gravitational forces offset each other, resulting in tides that are not as extreme. Therefore, high tides are strongest when the Sun and the Moon are aligned, while low tides are weakest when the Sun is at 90° to the Earth-Moon alignment.

2VCl2 + 3Cl2 -> 2VCl5

Reactants: 2VCl2 and 3Cl2

Product: 2VCl5

To balance the equation, set up a chart with the reactants and products on separate sides. On one side should be V - 1 and Cl - 4 with a line and on the right side should be V - 1 and Cl - 5.

The numbers correspond with the subscripts. To balance, use the biggest compound (VCl5) and multiply that by 2 in order to get an even number for both of 2 and 10. For the reactants, you now need to multiply to get corresponding amounts.

Hope this helps!

Answer: Reactants: 2VCl2 and 3Cl2; product: 2VCl5

Explanation:

The concentration of Fe²⁺ is given as 0.250 M.

The volume of Fe²⁺ is given as 60.0 ml.

The concentration of Cr₂O₇²⁻ is given as 0.100 M.

The following is the reaction:

Cr₂O₇²⁻ (aq) + 6Fe²⁺ (aq) + 14H⁺ (aq) → 2Cr³⁺ (aq) + 6Fe³⁺ (aq) + 7H₂O (l)

1 mole of Cr₂O₇ reacts with 6 moles of Fe²⁺

The moles of Fe²⁺ present in the solution is:

Moles = Molarity × Volume

= 0.250 M × 60 ml × 1L / 1000 ml

= 0.015 ml

Thus, Fe²⁺ is producing 0.015 mol in the given reaction.

The volume of Cr₂O₇²⁻ required is:

1 mole of Cr₂O₇²⁻ = 6 moles of Fe²⁺

Molarity of Cr₂O₇²⁻ × volume of Cr₂O₇²⁻- = 1/6 moles of Fe²⁺ present in the reaction

Volume of Cr₂O₇²⁻ = 0.015 mol/0.600 mol/L

= 0.025L × 1000ml / 1L

= 25 ml

Hence, the volume of Cr₂O₇²⁻ needed is 25 ml.

In acidic solution, dichromate ion Cr2O72- can oxidize Fe2+ to Fe3+. The balanced redox equation is 6 Fe2+ (aq) + Cr2O72- (aq) + 14 H+ (aq) → 6 Fe3+ (aq) + 2 Cr3+ (aq) + 7 H2O (l). To find the volume of Cr2O72- required, we can use stoichiometry and given values.

In acidic solution, the dichromate ion Cr2O72- (aq) can oxidize Fe2+ to Fe3+. The balanced redox equation is:

6 Fe2+ (aq) + Cr2O72- (aq) + 14 H+ (aq) → 6 Fe3+ (aq) + 2 Cr3+ (aq) + 7 H2O (l)

To find the volume of 0.100 M Cr2O72- (aq) required, we can use the stoichiometry of the reaction and the given concentration of Fe2+ (0.250 M) and volume (60.0 mL).

Let me know if you need help calculating the volume.

https://brainly.com/question/32431557

#SPJ11

Im pretty sure austin texas is the closest place to the epicenter

The epicenter is the point on the Earth's surface directly above where an earthquake or underground explosion originates. The nearest city to the epicenter will likely experience significant effects of the event. For example, San Francisco was near the epicenter of the 1906 earthquake.

The question does not provide a specific location or event, which makes it difficult to give a definite answer. In general, the term epicenter is used in geology, specifically in the context of earthquakes. It refers to the point on the Earth's surface directly above the point where an earthquake or other underground explosion originates—this point is known as the focus or hypocenter. Usually, the city near the epicenter of an earthquake will most likely experience the strongest shaking and highest degree of damage.

For example, if we were discussing the 1906 San Francisco earthquake, then San Francisco would be the city near the epicenter.

https://brainly.com/question/11222669

#SPJ2

Accuracy refers to the closeness of a measured value to a standard or known value. Precision is independent of accuracy. You can be very precise but inaccurate.

Answer:

Both terms are related and they are really important in the science field to measure how successful can be an experiment.

First, the accuracy is the relation to express how close is the value that I measure in an experiment from a real value that it has been already proved.

For example: I measure the volume of a soda can in my lab and I found that this soda can has 235 mL inside but the packing says that has 230 mL. So it means that my measure data it is not accurate.

Thus, the accuracy is important because gives me validity of my designed experiment.

Second, the precision is the relation between my datas and how far are they from each other.

For example: Taking again the example of the soda can, I was in the lab measuring the volume and I made it 3 times. My datas were: 235 mL, 220mL, and, 210 mL. So it means that my measures are far from each other so it is not precise.

Precision is important because gives reliability to the experiment.

There is also mathematical approximations to measure accuracy and precision, the accuracy can be measure finding the error and the precision can be measure by a standard deviation that means how far are my datas from the average.

Answer: Chemicals become positively charged by loosing electrons.

Explanation: There are three types of compounds:

1) Neutral compounds: These are the compounds where equal number of protons and electrons are present.

2) Positive compounds: These are the compounds where number of protons are more than the electrons. These are considered as cations.

3) Negative compounds: These are the compounds where number of electrons are more than the protons. These are considered as anions.

So, in order to have a positive charge on a compound, that compound has to loose electrons, so that the number of protons gets higher than the number of electrons.

C-Cl bond is polar.

As Cl is more electronegative than C,  

Cl pulls the shared electrons towards its side making the C-Cl bond polar.

Polar meaning C gets a partial positive charge and Cl gets a partial negative charge. Thus C-Cl bond becomes polar.

CCl4 molecule is tetrahedral.

And its shape is symmetrical.

That means its similar on all corners or all planes and it can be cut into equal halves from any plane.

C-Cl bond is polar.But the C-Cl polairty gets cancelled out as its pulled equally from all sides.

Since the molecule is symmetrical CCl4 is non polar.  

The CCl4 molecule has polar covalent bonds but is symmetrical in shape, making it nonpolar. As a nonpolar molecule, CCl4 is hydrophobic and has low reactivity with polar substances.

The CCl4 molecule consists of one carbon atom bonded to four chlorine atoms. The bonds in CCl4 are polar covalent in nature because chlorine is more electronegative than carbon. However, the molecule is symmetrical in shape, with the carbon atom at the center and the four chlorine atoms surrounding it in a tetrahedral arrangement.

Due to its symmetrical shape, the CCl4 molecule is nonpolar. In a nonpolar molecule, the distribution of charges is balanced, meaning there is no separation of positive and negative charges. This is because the individual bond dipoles cancel each other out, resulting in a net dipole moment of zero.

The nonpolarity of CCl4 makes it hydrophobic, meaning it does not dissolve in water. It also has low reactivity with other polar substances, making it useful in certain applications such as as a cleaning solvent or refrigerant.

https://brainly.com/question/33242453

#SPJ6

Given : Density of Air is 1.19 gram per liter

[tex]\mathsf{\heartsuit\;\; Density\;of\;Air = \frac{Mass\;of\;Air}{Volume\;of\;Air}}[/tex]

Given : Mass of Sample of Air = 50 grams

[tex]\mathsf{\implies 1.19 = \frac{50}{Volume\;of\;Air}}[/tex]

[tex]\mathsf{\implies Volume\;of\;Air = \frac{50}{1.19}}[/tex]

[tex]\mathsf{\implies Volume\;of\;Air = 42\;Liter}[/tex]

Given : Dry Air is about 20.95% Oxygen by Volume

[tex]\mathsf{\implies Volume\;of\;Oxygen\;in\;42\;Liter\;of\;Air = 20.95\%\;of\;42\;Liter}[/tex]

[tex]\mathsf{\implies Volume\;of\;Oxygen\;in\;42\;Liter\;of\;Air = (\frac{20.95}{100})\times 42}[/tex]

[tex]\mathsf{\implies Volume\;of\;Oxygen\;in\;42\;Liter\;of\;Air = 0.2095 \times 42}[/tex]

[tex]\mathsf{\implies Volume\;of\;Oxygen\;in\;42\;Liter\;of\;Air = 8.8\;Liter}[/tex]

At STP : 22.4 Liter of Oxygen contains 6.023 × 10²³ Molecules of O₂

[tex]\mathsf{\implies Number\;of\;Oxygen\;Molecules\;in\;8.8\;Liter\;of\;Oxygen = (\frac{8.8 \times 6.023 \times 10^2^3}{22.4})}[/tex]

[tex]\mathsf{\implies Number\;of\;Oxygen\;Molecules\;in\;8.8\;Liter\;of\;Oxygen = 2.366 \times 10^2^3}}[/tex]

Final answer:

To calculate the number of oxygen molecules in a 50.0 g sample of air, determine the volume of air, calculate the moles of oxygen, and then convert moles to molecules using Avogadro's number.

Explanation:

To calculate the number of oxygen molecules in a 50.0 g sample of air, we first need to determine the volume of air. Given that the density of air is 1.19 g/L, we can calculate the volume using the formula:

Volume (V) = Mass (m) / Density (d)

Plugging in the values, we get:

V = 50.0 g / 1.19 g/L = 42.02 L

Next, we need to calculate the moles of oxygen in the sample. Oxygen makes up 20.95% of dry air by volume, so the volume of oxygen in the sample is:

Oxygen volume = 0.2095 x 42.02 L = 8.795 L

Now we can use Avogadro's law to calculate the number of oxygen molecules:

Number of oxygen molecules = Oxygen volume / Molar volume of oxygen

At standard temperature and pressure (STP), the molar volume of any gas is 22.4 L/mol. Therefore, the number of oxygen molecules in the 50.0 g sample of air is:

Number of oxygen molecules = 8.795 L / 22.4 L/mol = 0.393 mol

To convert moles to molecules, we use Avogadro's number (6.022 x 10²³ molecules/mol):

Number of oxygen molecules = 0.393 mol x 6.022 x 10²³ molecules/mol = 2.364 x 10²³ molecules

Explanation:

A mixture is a substance that contains two or more components which are mixed together but they are not chemically combined to each other.

For example, sand, salt and steel shavings in water is a mixture.

So, in order to separate its components we can do the following.

Step 1: Pass a magnet over the mixture to remove the steel. As this will remove steel from mixture.

After that, adding water will make a solution in which sand and salt are present.

Step 2: Add water to the sand/salt mixture and stir to dissolve the salt.

Step 3: Pour the mixture through a filter to separate the sand.

Step 4: Heat the mixture to evaporate the water.

Thus, we can conclude that correct order to separate the given mixture is 3, 4, 2, 1.

The best method for separating a mixture of sand, salt, and steel shavings is to add water and dissolve the salt, then filter out the sand particles, use a magnet to remove the steel shavings, and heat the mixture to evaporate the water.

The best method for separating a mixture of sand, salt, and steel shavings is as follows:

By adding water and stirring, the salt dissolves in the water. Then, pouring the mixture through a filter separates the sand particles from the liquid. Next, passing a magnet over the mixture allows the steel shavings to be attracted and separated. Finally, heating the mixture evaporates the water, leaving behind the separated components.

https://brainly.com/question/34301663

#SPJ3

5 protons, 5 neutrons

He predicted them by the chemical similarities.

Charles law states a proportional relationship between volume and temperature.

[tex]\frac{V_{1} }{T_{1} } =\frac{V_{2} }{T_{2} }[/tex]

V1= 100mL=0.1L

V2=400mL=0.4L

T1=80'c+273=353K

T2=?

T2=1412K-273=1139'C

The correct answer is option D, that is, magma is injected into surrounding rock producing an igneous intrusion.  

Magma refers to a semifluid or fluid substance within or underneath the crust of the Earth from which the formation of lava and other igneous rocks takes place by cooling. Igneous intrusion produces when the magma from beneath the Earth's surface is gradually pushed up to occupy the cracks or spaces between the rocks and solidifies and cools down prior of reaching to the Earth's surface.  

True, as an acid is soap which is slick and tastes bitter.

Yes, true.

Acids have a bitter taste because of the presence of alkali...

A reaction where one becomes two

2H202 --> 2H2O + O2

Final answer:

The general form of a decomposition reaction is AB ⇒ A + B.

Explanation:

The general form of a decomposition reaction is when a single compound breaks down into two or more simpler substances. These products can be elements, compounds, or a mixture of both. A common way to represent a decomposition reaction is using the formula AB ⇒ A + B, where AB is the original compound and A and B are the simpler substances that are produced.

Decomposition reactions can release energy, often symbolized as AB ⇒ A + B, where AB represents the substrate, A and B are products, and the energy is released when covalent bonds within the substrate are broken. For example, the thermal decomposition of gaseous [tex]N_{2}[/tex] [tex]O_{5}[/tex] to  [tex]NO_{2}[/tex] and [tex]O_{2}[/tex] can be represented as [tex]2N_{2}O_{5}[/tex](g) ⇒ 4[tex]NO_{2}[/tex](g) + [tex]O_{2}[/tex](g). This demonstrates the breaking of bonds between components of a larger molecule to form smaller product molecules.

Answer: A) Ar

Explanation: Argon [Ar]  has an atomic no of 18 and the electronic configuration is:

Ar :[tex]1s^22s^22p^63s^23p^6[/tex]

Chlorine [Cl] has atomic no of 17 and thus the electronic configuration is :

Cl :[tex]1s^22s^22p^63s^23p^5[/tex]

Magnesium [Mg] has atomic no of 12 and thus the electronic configuration is :

Mg :[tex]1s^22s^22p^63s^2[/tex]

Sodium has atomic no of 11 and thus the electronic configuration is :

Cl :[tex]1s^22s^22p^63s^1[/tex]

As we move across a period the number of electrons are being added to the same shell but the number of protons increases, thus the electrons are being tightly held and thus the atomic radius keeps on decreasing.

Thus the smallest atom would have a tightly bound electron nearer to the nucleus. As argon is the last element of the period, it is the smallest in the period and thus largest amount of energy will be required to remove the outermost electron.

Answer: Option (A) is the correct answer.

Explanation:

The energy necessary to remove an electron from a gaseous atom or ion is known as ionization energy.

This means that smaller is the size of an atom more amount of energy has to be supplied to it in order to remove the valence electron. This is because in small atom or element there will be strong force of attraction between the nucleus and electrons.

So, high amount of energy has to be supplied to remove the valence electrons.

For example, argon (Ar) is the smallest element out of the given options and also being a noble gas it is stable in nature.

Therefore, largest amount of energy has to be supplied to argon to remove its valence electron.

Thus, we can conclude that Ar atom would require the largest amount of energy to remove its outermost electron.

The emperical formula can be calculated as follows:

mass :   4.12g of N            and        0.88g of H

moles:   4.12g/14.007       and        0.88g/1.008

moles:   0.294                   and        0.873

moles/smallest number:   (gives the ratio of atoms)

             0.294/0.294                and           0.873/0.294

                   1                               and             2.969

                    1                              and              3

The simplest ratio of N : H is 1 : 3

Hence the emperical formula is NH3

Explanation:

 1.   The emperical formula can be found by getting  the simplest ratio of atoms in a molecule.

2. To get the simplest ratio of atoms we find out the number of moles of each atoms in it.

3. From the number of moles of atoms we can find the simplest ratio of each atom by dividing the number of moles by the smallest number.

My thought would be B) gases.

I could be wrong but that's what i'd say

Answer:

D. Fluids

Explanation: