The term for free electrons in metals transferring energy by colliding with other atoms or electrons is _____.

Glycolysis is the biological process where glucose is oxidized to form two molecules of pyruvate. Here, glucose is broken down using ATP and NAD+, generating energy for the cell and creating substrates for the Krebs cycle in the presence of oxygen.

The process in which glucose is oxidized to form two molecules of pyruvate is known as glycolysis. In the presence of ATP and NAD+, glucose is broken down into pyruvate, yielding a net gain of two ATP and two NADH molecules. These molecules carry high-energy electrons that are used later to produce even more ATP in the mitochondria. If oxygen is present, the pyruvate continues to the Krebs cycle (also known as the citric acid cycle) for further processing and energy extraction. Thus, glycolysis is a crucial step in cellular metabolism, converting glucose into usable energy and preparing it for further oxidation in the Krebs cycle if aerobic conditions are met.

https://brainly.com/question/29604117

#SPJ12

Final answer:

There are 6.022 × 1023 oxygen atoms in 0.500 mol of carbon dioxide, calculated by doubling the moles of CO2 for oxygen and then multiplying by Avogadro's number.

Explanation:

The question asks how many oxygen atoms are present in 0.500 mol of carbon dioxide (CO2). To find this, we need to use Avogadro's number, which is 6.022 × 1023 atoms/mole, and the fact that each molecule of CO2 contains two oxygen atoms. Here is the calculation:

First, determine the number of moles of oxygen atoms. Since there are 2 moles of oxygen atoms for every mole of CO2, we have 0.500 mol × 2 = 1.000 mol of oxygen.

Next, multiply the number of moles of oxygen by Avogadro's number to get the total number of oxygen atoms: 1.000 mol × 6.022 × 1023 atoms/mole = 6.022 × 1023 oxygen atoms.

Therefore, 0.500 mol of carbon dioxide contains 6.022 × 1023 oxygen atoms.

In 0.500 mol of CO2, there are approximately 6.022 × 10^23 oxygen atoms, calculated using Avogadro's number and stoichiometry.

To determine the number of oxygen atoms in 0.500 mol of carbon dioxide (CO2), we can use Avogadro's number and the stoichiometry of the compound. Avogadro's number (6.022 x 10^23) represents the number of entities (atoms, molecules, ions) in one mole of a substance.

The chemical formula for carbon dioxide is CO2, which indicates that one mole of CO2 contains one mole of carbon atoms and two moles of oxygen atoms.

Given that the molar mass of oxygen (O) is approximately 16 g/mol, and CO2 has a molar mass of approximately 44 g/mol, we can find the moles of oxygen in 0.500 mol of CO2.

Moles of O = Moles of CO2 × (Moles of O / Moles of CO2)

Moles of O = 0.500 mol × (2 / 1) = 1.000 mol O

Now, using Avogadro's number, we can find the number of oxygen atoms:

Number of oxygen atoms = Moles of O × Avogadro's number

Number of oxygen atoms ≈ 1.000 mol × 6.022 × 10^23 atoms/mol

Number of oxygen atoms ≈ 6.022 × 10^23 atoms

The voltage-gated ion channel opens in response to a change in membrane potential and is involved in the generation and spreading of action potentials. As the membrane depolarizes, voltage-gated sodium channels open, allowing sodium ions to enter the muscle fiber, leading to the spread of action potential.

The ion channel that opens in response to a change in membrane potential and participates in the generation and conduction of action potentials is known as a voltage-gated ion channel. As the membrane depolarizes, voltage-gated sodium channels are triggered to open. Sodium ions then enter the muscle fiber initiating a process known as excitation-contraction coupling which results in an action potential, a transmission of an electrical signal, swiftly spreading along the entire membrane. This mechanism is critical to the function of neurons and muscle fibers.

Typically, the voltage of the inner portion of the membrane is negative. When this voltage becomes less negative, the voltage-gated channel allows ions to cross the membrane. It is also worth noting, that voltage-gated channels can become inactivated for a brief period after activation, during which they will not open in response to a signal.

https://brainly.com/question/38319447

#SPJ3

First of all, convert given masses to number of moles:

H2 = 15 kg / (2 kg / kmol) = 7.5 kmol

N2 = 15 kg / (28 kg / kmol) = 0.5357 kmol

NH3 = 13.7 kg / (17 kg/ kmol) = 0.8059 kmol

The balanced chemical reaction is:

N2 + 3H2  -->  2NH3

We can see that N2 is the limiting reactant and for every 1 mole of N2, there are 2 moles of NH3 produced, hence:

NH3 theoretically produced = 0.5357 kmol * (2 / 1) = 1.0714 kmol

Therefore the percent yield assuming that the reaction is complete is:

% yield = (0.8059 kmol / 1.0714 kmol) * 100

% yield = 75.22%

The percent yield of ammonia produced from 15.0 kg each of H₂ and N₂, with 13.7 kg of product recovered, assuming the reaction goes to completion, is approximately 75.7%.

To calculate the percent yield, we first need to determine the theoretical yield, which is the amount of product that would be formed if the reaction went to completion with 100% efficiency.

The balanced chemical equation for the production of ammonia from hydrogen (H₂) and nitrogen (N₂) is:

[tex]\[ N_2(g) + 3H_2(g) \rightarrow 2NH_3(g) \][/tex]

From the stoichiometry of the reaction, 1 mole of N₂ reacts with 3 moles of H₂ to produce 2 moles of NH₃. The molar masses of N₂, H₂, and NH₃ are approximately 28.02 g/mol, 2.016 g/mol, and 17.03 g/mol, respectively.

First, we calculate the moles of N₂ and H₂:

[tex]\[ \text{Moles of } N_2 = \frac{15.0 \times 10^3 \text{ g}}{28.02 \text{ g/mol}} \approx 535.4 \text{ mol} \][/tex]

[tex]\[ \text{Moles of } H_2 = \frac{15.0 \times 10^3 \text{ g}}{2.016 \text{ g/mol}} \approx 7439.7 \text{ mol} \][/tex]

Since the reaction requires 3 moles of H₂ for every mole of N₂, and we have more than enough H₂, N₂ is the limiting reactant. Therefore, the theoretical yield of NH₃ is determined by the amount of N₂:

[tex]\[ \text{Theoretical yield of } NH_3 = 535.4 \text{ mol} \times \frac{2 \text{ mol } NH_3}{1 \text{ mol } N_2} \times \frac{17.03 \text{ g}}{1 \text{ mol } NH_3} \][/tex]

[tex]\[ \text{Theoretical yield of } NH_3 \approx 18037.4 \text{ g} \approx 18.0374 \text{ kg} \][/tex]

Now, we calculate the percent yield using the actual yield (13.7 kg) and the theoretical yield:

[tex]\[ \text{Percent yield} = \left( \frac{\text{Actual yield}}{\text{Theoretical yield}} \right) \times 100\% \][/tex]

[tex]\[ \text{Percent yield} = \left( \frac{13.7 \text{ kg}}{18.0374 \text{ kg}} \right) \times 100\% \approx 75.97\% \][/tex]

The atoms get smaller as move left to right of the periodic table which is because this attraction is much stronger than the relatively weak repulsion between electrons.

Periodic table is tabular form of the chemical elements with increasing order by their atomic number and the elements are arranged in groups on the basis of similar properties.

Elements of the periodic table which are arranged from left to right and top to bottom with respect to increasing atomic numbers.

Elements in the same group will have the same valence electron configuration have same chemical properties while elements  will have an increasing order of valence electrons.

For more details regarding periodic table , visit:

https://brainly.com/question/11155928

#SPJ2

Final answer:

In biology, high school students learn about the conversion process of pyruvate into acetyl CoA for the Krebs cycle. The components involved include Pyruvate Dehydrogenase Enzyme, Acetyl CoA, and Oxaloacetate.

Explanation:

In the process of converting three-carbon pyruvate molecules into two-carbon acetyl groups for entry into the Krebs cycle, several components are involved:

Pyruvate Dehydrogenase Enzyme: This enzyme catalyzes the conversion of pyruvate into acetyl Coenzyme A (acetyl CoA) in the mitochondrial matrix.

Acetyl CoA: The two-carbon molecule formed from the conversion of pyruvate, ready to enter the Krebs cycle.

Oxaloacetate: A four-carbon molecule in the Krebs cycle that combines with acetyl CoA to initiate the cycle by forming citrate.

The three main subatomic particles in an atom are protons, neutrons, and electrons. Protons have a mass of 1.0073 amu and a charge of +1, neutrons have a mass of 1.0087 and no charge, and electrons have a mass of 0.00055 amu and a charge of -1. The sum of the particles' masses doesn't equal an atom's actual mass which is termed as a mass defect in nuclear chemistry.

The question refers to the basic properties of three primary subatomic particles found in an atom: protons, neutrons, and electrons. A proton has a mass of 1.0073 atomic mass units (amu) and a charge of +1. A neutron has a slightly higher mass of 1.0087 amu and is neutral, holding no charge. An electron has a much lighter mass of about 0.00055 amu and it carries a charge of -1.

However, it's interesting to note that if you add up the mass of these subatomic particles, the total doesn't equal the actual mass of an atom. For instance, the total mass of six protons, six neutrons, and six electrons is approximately 12.0993 amu, a bit larger than the known 12.00 amu of a carbon atom. The discrepancy is referred to as the mass defect and is explained in detail in the field of nuclear chemistry.

https://brainly.com/question/13303285

#SPJ2

When patterning a shotgun, a sufficient percentage of pellets within a 30-inch circle depends on the specific shooting requirements and preferences. However, a commonly recommended standard is to have at least 55% of the load with an even distribution within the 30-inch circle.

Having  55% of the load with an even distribution within the 30-inch circle ensures a dense and consistent pattern, increasing the chances of hitting the target effectively. It is important to note that individual shooting styles and the intended use of the shotgun may vary, so it is advisable to pattern the shotgun and adjust the load distribution accordingly for optimal performance.

Hence, at least 55% of the load, with even distribution, is prescribed.

Learn more about shotgun here:

https://brainly.com/question/30165934

#SPJ 6

A dividing ridge or watershed divide separates adjacent watersheds, like the Continental Divide in North America where rivers flow in opposite directions. Mount Elbert is the highest point on this divide, and Longs Peak is a notable mountain along it.

The high point of land that separates adjacent watersheds is known as a dividing ridge or watershed divide. This feature determines the direction in which water flows across the landscape. In North America, the Continental Divide is a well-known example of a watershed divide where the line of the highest points marks the separation between rivers flowing eastward and westward. The highest point along this line is Mount Elbert, and a prominent mountain along the Continental Divide is Longs Peak.

Watershed divides can be found in various forms around the world, such as the Western Highlands in Europe, which provide natural separations for watersheds. The concept of watersheds is vital not only for understanding water flow but also for environmental management, as it affects the collection and distribution of water resources.

Electronegativity is the chemical property that distinguishes a metal from a nonmetal. Metals have low electronegativity and tend to lose electrons, while nonmetals have high electronegativity and tend to gain electrons.

The chemical property that distinguishes a metal from a nonmetal is electronegativity. Electronegativity is the tendency of an atom to attract electrons towards itself in a chemical bond. Metals generally have low electronegativity, which means they tend to lose electrons and form positive ions. Nonmetals, on the other hand, have high electronegativity and tend to gain electrons to form negative ions.

For example, consider sodium, a metal, and chlorine, a nonmetal. Sodium has a low electronegativity and readily loses an electron to become a sodium ion with a positive charge. Chlorine, on the other hand, has a high electronegativity and readily gains an electron to become a chloride ion with a negative charge.

Electronegativity is an important property for understanding the behavior and reactivity of elements, as it determines how atoms interact with each other in chemical reactions and the formation of compounds.

https://brainly.com/question/35593282

#SPJ6

The property that distinguishes a metal from a nonmetal is conductivity.

The chemical property that distinguishes a metal from a nonmetal is conductivity.

Metals are good conductors of heat and electricity, while nonmetals are poor conductors. The ability of metals to conduct electricity is due to the presence of free or delocalized electrons that are able to move easily throughout the metal structure.

In contrast, nonmetals do not have these free electrons and therefore do not conduct electricity well.

https://brainly.com/question/33823148

#SPJ6

Actually each molecule of Hb can bind four oxygen molecules. So given 1 x 10^6 Hb, so there are 4 x 10^6 binding sites available.

If only 50% of the Hb are bound, so this means that 2 x 10^6 binding sites are occupied by O2. However we must remember that hemoglobin binding is an all-or-nothing phenomenon. Meaning that each molecule of Hb binds four molecules of oxygen or zero at all.

If 23% is saturated, so the number of binding sites occupied is 0.92 x 10^6 binding sites or 9.2 x 10^5 binding sites.

Hey Brainly Student! Your answer us true, SUPRISE FACT ABOUT ATOMS!!: When you think of an atom what do you think of? Problily a small circle with afew rings around it right? Well, actually an atom doesnt look like that at all!! An atom looks sort of like the Solar System, and the little rights are like the rotation the planets spin in, also the little star like balls/dots dont actually go around the atom's center, but go in many diffrent places it can be far from the atom, or can be very close! An atom is unpredictable, so there is no correct answer to where the atom's little balls/dots will end up next. I hope this helped, and also hope you liked/loved the Fun-Fact!! Your fellow Brainly user, GalaxyGamingKitty

Isotopes are the forms of same element with same atomic number but different mass number due to different number of neutrons. The name of isotope of oxygen is Oxygen-17.

Element generally consist of atoms or we can atoms combine to form element. Atoms of an element is always same, means all the properties of all atoms of one type of element is same. Different element have different types of atoms.

Oxygen-16 has atomic number 8, which means number of electron is 8 , number of proton is 8 and number of neutron is also 8. If we increase the number of neutron by 1 that is 9 then the mass number of oxygen will be increased by 1 that is 17. Now the new element is oxygen-17 which is an isotope.

Therefore, the name of isotope of oxygen is Oxygen-17.

To know more about element, here:

https://brainly.com/question/8460633

#SPJ5

Answer:That would be 16.1 degrees Celsius 

Pure substances are made by a single kind of matter and it cannot be separated whereas, mixtures are substance formed by the mixing of two or more pure substances. Thus, option A is correct.

Mixtures are combination of two or more substances which are mixed in a homogenous or heterogenous fashion. Homogenous mixtures are those which appear to be one component like salt solution where only one phase exists.

Heterogenous mixtures forms different phases and the individual components are not uniform will seen separately. Mixtures can be separated based on the properties of the individual components such as using distillation, filtration, chromatography etc.

Pure substances are formed by single type of atoms for example pure water, fruit pies, pure acids etc. They contains their own particles only. Hence, option A is correct.

To find more about mixtures, refer the link below:

https://brainly.com/question/12160179

#SPJ1

Answer:

The answer is D) on USA Test prep

Explanation:

Density of Silver = 10.5 g / cm^3

Density of Lead = 11.34 g / cm^3

So the masses of each given a volume of 1 cm^3 is:

mass of Silver = 10.5 grams

mass of Lead = 11.34 grams

So we see that Lead has greater mass for similar volume.

The difference is:

11.34 – 10.5 = 0.84 grams

To write 578,000,000 in scientific notation, move the decimal point to the left until there is only one non-zero digit to the left of the decimal point, resulting in 5.78 × 10^8.

To write 578,000,000 in scientific notation, we need to move the decimal point to the left until there is only one non-zero digit to the left of the decimal point. In this case, we can move the decimal point 8 places to the left, resulting in 5.78 × 108.

https://brainly.com/question/16936662

#SPJ3

Answer:

Amount of water that can be vaporized = 369 g

Explanation:

Heat content of the cookie (q) = 835 kJ

Latent heat of vaporization of water (ΔHvap) = 40.7 kJ/mol

Density of water = 1 g/ml

Calculation:

Heat content of cookie = Heat absorbed by water

q = n(ΔHvap)

n = moles of water

n = q/ΔH = 835 kJ/ 40.7 kJ/mol = 20.516 moles

Molar mass of water = 18 g/mol

Mass of water = moles * molar mass = 20.516 moles * 18 g/mol = 369.3 g