Answer:
false
Explanation:
Work may be done in positive or negative direction. When a work is done in positive direction, it is called useful work, when work is done in negative direction, it is known as useless work. Any energy associated with friction produces useless work. That is, the work is done in negative direction.
Therefore, thermal energy produced by friction can be used to do work but in negative direction.
The correct option is false.
What energy source would be abundant in california due to its position on a plate boundary?
The energy source which is most abundant in california due to its position in plate boundary is geothermal energy.
What is geothermal energy?Geothermal energy is the thermal energy found in the Earth's crust that has been produced during the planet's formation and by the radioactive decay of minerals in an amount that is currently unknown but may be nearly equal.
Some rocks melt under the intense pressure and heat of the Earth's interior, while the solid mantle exhibits plastic behavior. As a result, since the mantle is lighter than the surrounding rock, some of it convicts upward.
Since the Paleolithic era, geothermal heating has been utilized for space heating and for bathing, respectively, utilizing water from hot springs.
Geothermal power, the phrase used to describe the production of electricity from geothermal energy, has become more significant in recent years.
To find more on plate boundaries, refer here:
https://brainly.com/question/18256552
#SPJ5
State two of Newton’s three laws
Newton's First Law states that an object will remain at rest or in uniform motion in a straight line unless acted upon by an external force. It may be seen as a statement about inertia, that objects will remain in their state of motion unless a force acts to change the motion. Any change in motion involves an acceleration, and then Newton's Second Law applies. The First Law could be viewed as just a special case of the Second Law for which the net external force is zero, but that carries some presumptions about the frame of reference in which the motion is being viewed. The statements of both the Second Law and the First Law here are presuming that the measurements are being made in a reference frame which is not itself accelerating. Such a frame is often referred to as an "inertial frame". The statement of these laws must be generalized if you are dealing with a rotating reference frame or any frame which is accelerating.
Newton's First Law contains implications about the fundamental symmetry of the universe in that a state of motion in a straight line must be just as "natural" as being at rest. If an object is at rest in one frame of reference, it will appear to be moving in a straight line to an observer in a reference frame which is moving by the object. There is no way to say which reference frame is "special", so all constant velocity reference frames must be equivalent.
Two of Newton's laws of motion are: the first law, stating that an object at rest stays at rest and an object in motion stays in motion at a constant velocity unless acted upon by an external force; and the second law, which describes how a force on an object results in an acceleration proportional to that force and inversely proportional to the object's mass.
Explanation:Isaac Newton’s contributions to science include the formulation of three fundamental laws of motion that describe the relationship between a body and the forces acting upon it, and the body’s motion in response to these forces. The first two of Newton's laws are:
Newton’s first law, also known as the law of inertia, states that every object will continue to be in a state of rest or move at a constant speed in a straight line unless it is compelled to change that state by an outside force. This law emphasizes the tendency of objects to resist changes to their state of motion unless acted upon.
The change of motion of a body, as described by Newton’s second law, is proportional to and in the direction of the force acting on it. This law introduces the concept of acceleration, indicating that a force results in an acceleration of an object, and that acceleration is dependent on the object’s mass.
A box is sliding up an incline that makes an angle of 14.0° with respect to the horizontal. the coefficient of kinetic friction between the box and the surface of the incline is 0.180. the initial speed of the box at the bottom of the incline is 2.20 m/s. how far does the box travel along the incline before coming to rest?
The box travels a distance of approximately 3.51 meters along the incline before coming to rest.
An angle of 14.0° with respect to the horizontal is made when box slides up an incline. 0.180 is the coefficient of kinetic friction between the box and the surface of the incline. It is given that 2.20 m/s is the initial speed of the box at the bottom of the incline. The box travels a distance of approximately 3.51 meters along the incline before coming to rest.
To find this, we use the equations of motion, taking into account the forces acting on the box, including gravity, normal force, friction force, and the component of gravity parallel to the incline. By applying these equations and considering the work done by friction, we can determine the distance traveled by the box.
If asked to describe a wave, you could say waves are the (10 points)
A. movement of particles within a medium.
B.disturbance of energy in a material.
C.repetitive transfer of particles from one medium to another.
D. continuous transmission of energy from one location to the next.
A force of 20 N acts on a rocket for 350 s, causing the rocket's velocity to increase. Calculate the impulse of the force and by how much does the rocket's momentum increase?
A force of 20 N acts on a rocket for 350 s, causing the rocket's velocity to increase, the impulse of the force, the rocket's momentum increase 7000 N-s.
What is force?A force in physics is an effect that has the power to alter an object's motion. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull.
A force is a vector quantity since it has both magnitude and direction.
The formula for impulse is force times time, so impulse would be 20N x 350s = 7000 N x s. Since this impulse of 7000 N x s, the momentum would also be the same since the velocity increased after this impulse.
A force of 20 N acts on a rocket for 350 s, causing the rocket's velocity to increase, the impulse of the force, the rocket's momentum increase 7000 N-s.
To learn more about force refer to the link:
brainly.com/question/13191643
#SPJ5
What can be concluded about the atom from knowing that oxygen-18 has an atomic number of 8? A) An oxygen atom that includes 8 baryons, 9 prions, and 10 neutrons. B) This oxygen isotope contains 8 electrons, 8 protons, and 10 neutrons. C) It's an oxygen allotrope incorporates 7 electrons, 7 protons, and 7 quarks. D) The oxygen configuration consists of 6 electrons, 8 photons, and 10 neutrons.
A runner runs halfway around a circular path of a radios of 10m. What Is the displacement of the jogger
The displacement of the jogger is 20m.
Explanation:The displacement of the jogger can be calculated using the formula for the circumference of a circle. The circumference of a circle is given by the formula: C = 2πr, where r is the radius of the circle. In this case, the radius is 10m, so the circumference is 2π(10m) = 20πm.
Since the jogger runs halfway around the circular path, the distance traveled is half the circumference of the circle. Therefore, the jogger travels a distance of 10πm. However, the question asks for the displacement, which is a vector quantity that represents the change in position from the starting point to the ending point. In this case, since the jogger runs halfway around the circle, the displacement is the diameter of the circle, which is equal to twice the radius. Therefore, the displacement of the jogger is 2(10m) = 20m.
The displacement of a runner who runs halfway around a circular path with a radius of 10m is 20 meters, as the displacement is the diameter of the circle.
Explanation:The question pertains to physics, specifically involving concepts of displacement and circular motion. When a runner runs halfway around a circular path with a radius of 10m, their displacement is the straight-line distance from their starting point to the point directly opposite on the circle. Since displacement is a vector quantity, it does not take the path into consideration, but rather the shortest distance between two points.
In this case, the runner's displacement forms a straight line that passes through the center of the circle, effectively forming the diameter. The length of the diameter can be calculated using the radius of the circle, which is given as 10m. The displacement, in this case, would therefore be twice the radius, which is 20 meters.
If the density of an object is less than the density of water, what will the object do?
A. Bob up and down
B. Sink
C. Float
D. Move forward
How is position time and motion related
An object travels 8 meters in the first second of travel, 8 meters again during the second second of travel, and 8 meters again during the third second. Its acceleration is
A.0 m/s^2
B.8 m/s^2
C.16 m/s^2
D.32 m/s^2
An object travels 8 meters in the first second of travel, 8 meters again during the second of travel, and 8 meters again during the third second. Its acceleration would be 0 m / s² , therefore the correct answer is option A.
What is acceleration?The rate of change of the velocity with respect to time is known as the acceleration of the object. Generally, the unit of acceleration is considered as meter/seconds².
As given in the problem if an object travels 8 meters in the first second of travel, 8 meters again during the second of travel, and 8 meters again during the third second, then we have to find its acceleration ,
As the object is covering an equal distance in an equal interval of time its acceleration would be zero.
Thus , the correct answer is option A.
To learn more about acceleration from here,refer to the link given below,
brainly.com/question/2303856
#SPJ2
can you go 500 km in 8 hours without driving faster than 55 mph?
With a doctor’s permission, how many servings of the product could a person eat before reaching 100 percent of their allowable daily intake for cholesterol?
What if m1 is initially moving at 3.4 m/s while m2 is initially at rest? (a) find the maximum spring compression in this case?
How long until the sun runs out of hydrigen?
Before 1960, people believed that the maximum attainable coefficient of static friction for an automobile tire on a roadway was μs = 1. around 1962, three companies independently developed racing tires with coefficients of 1.6. this problem shows that tires have improved further since then. the shortest time interval in which a piston-engine car initially at rest has covered a distance of one-quarter mile is about 4.43 s. ]
Final answer:
The question asks for calculations involving the physics of car motion, specifically considering the static friction between tires and various road surfaces to find maximum deceleration and acceleration without slipping.
Explanation:
The student's question involves calculating the maximum deceleration and acceleration of a car under various road conditions, which requires an understanding of physics concepts such as centripetal force, coefficient of static friction, and normal force. These calculations are based on the equations of motion and the relationship between frictional force and the normal force, taking into account the angle of incline or decline of the road surface.
The coefficient of static friction is crucial in determining the car's ability to accelerate or decelerate without slipping. For example, the friction on dry concrete will differ from that on wet concrete or ice. The provided coefficients of static friction are used to determine the maximum safe speeds or accelerations to avoid tire slippage.
When you drop a rubber ball on the floor it bounces back. the force exerted on the ball to produce bouncing is by the?
To hoist himself into a tree, a 72.0-kg man ties one end of a nylon rope around his waist and throws the other end over a branch of the tree. he then pulls downward on the free end of the rope with a force of 371 n. neglect any friction between the rope and the branch, and determine the manâs upward acceleration. use g =9.80 m/sec2.
The man's upward acceleration is found using Newton's second law, calculating the man's weight and combining that with the force he exerts on the rope. The resulting net force is divided by his mass, giving a result inclusive of gravity. Subtracting gravity's acceleration gives his actual upward acceleration, 5.15 m/s².
Explanation:The subject of the question falls under the domain of Physics, specifically Newton's second law of motion. The 72.0-kg man throwing the rope over the tree and pulling down with a force of 371 N creates a force that works against his weight. To find the acceleration, we use the equation: net force = mass x acceleration (Net F = ma).
First, calculate the man's weight. Weight is the force due to gravity and is calculated as mass x gravity. So the man's weight is 72.0 kg x 9.80 m/s² = 705.60 N.
The force the man exerts on the rope is 371 N. But remember, he is pulling down, so his force and gravity are working together. Thus, the net force is 371 N (the man's pull) + 705.60 N (the man's weight) = 1076.60 N.
Then, to find the acceleration, we rearrange the equation to a = net force/mass. So, this becomes 1076.60 N / 72.0 kg = 14.95 m/s². But this includes the acceleration due to gravity. So to get the upward acceleration, we subtract gravity: 14.95 m/s² - 9.80 m/s² = 5.15 m/s² upward. Therefore, the man's upward acceleration due to his pull is 5.15 m/s².
Learn more about Newton's Second Law here:https://brainly.com/question/13447525
#SPJ11
la fuente de energia que se encuentra en la materia organica, de origen vegetal o animal y en los materiales obtenidos a partir de su transformacion recibe el nombre de:
a. Biomasa
b. Geotermica
c. Mareomotriz
d.Solar
A heavy crate applies of 1500 N on a 25-m^2 piston . The smaller piston is 1/30 the size of the larger one . what force is needed to lif the crate
Answer:
The force needed to lift the crate is 50 N
Explanation:
[tex]P_{1} = \frac{F_{1}}{A_{1}} = \frac{1500N}{25 m^{2} } \\P_{1}= P_{2} \\P_{2} = \frac{F_{2}}{A_{2}}\\A_{2} = 25*\frac{1}{30} \\\frac{1500N}{25 m^{2} } =\frac{F_{2} }{\frac{25}{30}m^{2} }\\ F_{2}* 25 m^{2} = 1500 N *\frac{25}{30}m^{2}\\ F_{2}= \frac{1250 N*m^{2}}{25 m^{2}}\\ F_{2}= 50 N[/tex]
Final answer:
To calculate the force needed to lift the crate, we can use Pascal's principle. The force needed to lift the crate is 50 N.
Explanation:
To calculate the force needed to lift the crate, we can use Pascal's principle. According to Pascal's principle, the pressure exerted on a fluid in a closed container is transmitted equally in all directions. In this case, the force applied by the heavy crate on the larger piston is 1500 N, and the smaller piston is 1/30 the size of the larger one. Therefore, the force needed to lift the crate can be calculated using the equation:
(Force on larger piston) / (Area of larger piston) = (Force needed to lift crate) / (Area of smaller piston)
Let's substitute the given values into the equation:
(1500 N) / (25 m^2) = (Force needed to lift crate) / (1/30 * 25 m^2)
Simplifying the equation, we find that the force needed to lift the crate is 50 N.
When drawing the best line of fit on a graph for physics, do I draw the line starting from the x-axis?
Answer:
It would be best to start as close to the first point of your line on the Y-axis.
(Sorry if that doesn't make much sense, I tried to word it as best as I could. Basically, just start your line on the Y-axis closest to your starting point of the line.)
Explanation:
A lens for a spotlight is coated so that it does not transmit yellow light. if the light sources is white, what color is the spotlight
The color of the spotlight will be blue since yellow will not be transmitted.
What is the color is transmitted when yellow is removed from white light?White light is composed of the colors seven close of light.
The seven colors rest of the seven colors can be produced from a combination of the colors red, blue and green light.
Yellow color is made from red and green color.
Since yellow will not be transmitted, the color of the spotlight will be blue.
Learn more about colors at: https://brainly.com/question/10064126
True or false speed is the change in direction and position of an object
Water has a density that is 13.6 times less than that of mercury. how high would a column of water need to be to measure a pressure of 1 atm?
Final answer:
A column of mercury would need to be 73.5 cm high to measure a pressure of 1 atm.
Explanation:
The question asks for the height of a column of water needed to measure a pressure of 1 atm. We can use the information given to compare the density of water and mercury. Since water has a density that is 13.6 times less than that of mercury, a column of mercury only needs to be 13.6 times shorter than a column of water to measure the same pressure. It is stated that a column of water over 10 meters high can measure atmospheric pressure, so a column of mercury would only need to be 10 meters / 13.6 = 0.735 meters (or 73.5 cm) high to measure the same pressure.
In a chemical reaction, water decomposes to form hydrogen and oxygen.
Which term names the water?
A.an element
B.an atom
C.a product
D.a reactant
Answer:
D. A reactant
Explanation:
A glacier moves with a speed of 35 nm/s. How many years would it take for the glacier to move 0.9 km? Assume there are 365 days in a year. Answer in units of y.
3 forces that you exert when riding a bike
In establishing standing waves with a Slinky®, your wrist oscillates with f frequency of 8.0 Hz, and the velocity of the wave is 40 m/s. What is the wavelength of this wave?
Answer:
the answer is 5.0
Explanation:
A 5.00X10^5 kg rocket is accelerating straight up. Its engines produce 1.250X10^7 N of thrust, and air resistance is 4.50X10^6 N. What is the rockets acceleration?
To determine the rocket's acceleration, subtract the air resistance from the thrust and divide by the mass of the rocket.
Explanation:To determine the rocket's acceleration, we need to calculate the net force acting on the rocket by subtracting the air resistance from the thrust.
The net force is equal to the mass of the rocket multiplied by its acceleration. Rearranging the equation, we can solve for acceleration: acceleration = (net force) / (mass). In this case, the net force is given as the thrust minus the air resistance, so the acceleration would be (1.250X10^7 N - 4.50X10^6 N) / (5.00X10^5 kg).
Simplifying the expression, the acceleration is approximately 17.6 m/s².
Learn more about rocket acceleration here:https://brainly.com/question/39037920
#SPJ12
The box is at rest on the table. Which force is represented by vector A?
A. sliding friction
B. rolling friction
C. static friction
D. fluid friction
the answer c!!!!!!!!!!
A 1423 kg car is traveling down the road at 105.0 km/h. while traveling at this rate of speed, what is the kinetic energy of this vehicle in kilojoules?
The kinetic energy of this vehicle in kilojoules is about 6.053 × 10² kiloJoules
Further explanation
Let's recall Kinetic Energy formula as follows:
[tex]Ek = \frac{1}{2}mv^2[/tex]
Ek = Kinetic Energy ( Joule )
m = mass of the object ( kg )
v = speed of the object ( m/s )
Let us now tackle the problem !
[tex]\texttt{ }[/tex]
Given:
mass of car = m = 1423 kg
speed of car = v = 105.0 km/h = 29¹/₆ m/s
Asked:
kinetic energy of car = Ek = ?
Solution:
We will use Kinetic Energy formula as follows:
[tex]Ek = \frac{1}{2}mv^2[/tex]
[tex]Ek = \frac{1}{2}(1423)(29\frac{1}{6})^2[/tex]
[tex]Ek \approx 6.053 \times 10^5 \texttt{ Joules}[/tex]
[tex]Ek \approx 6.053 \times 10^2 \texttt{ kiloJoules}[/tex]
[tex]\texttt{ }[/tex]
Conclusion:The kinetic energy of this vehicle in kilojoules is about 6.053 × 10² kiloJoules
[tex]\texttt{ }[/tex]
Learn moreImpacts of Gravity : https://brainly.com/question/5330244Effect of Earth’s Gravity on Objects : https://brainly.com/question/8844454The Acceleration Due To Gravity : https://brainly.com/question/4189441Newton's Law of Motion: https://brainly.com/question/10431582Example of Newton's Law: https://brainly.com/question/498822[tex]\texttt{ }[/tex]
Answer detailsGrade: High School
Subject: Physics
Chapter: Dynamics
[tex]\texttt{ }[/tex]
Keywords: Gravity , Unit , Magnitude , Attraction , Distance , Mass , Newton , Law , Gravitational , Constant