Two water balloons of mass 0.35 kg collide and bounce off of each other
without breaking. Before the collision, one water balloon moved at a velocity
of 2.5 m/s east, while the other moved at a velocity of 2.25 m/s west. After
the collision, one balloon moves at a velocity of 1.75 m/s west. What is the
velocity of the other water balloon?
O
A. 2 m/s west
O
B. 0.25 m/s east
O
C. 0.25 m/s west
O
D. 2 m/s east

Answer:

It takes  [tex] 2.43\times 10^2[/tex]  for the radio signal to travel from earth to the spaceship.

Explanation:

Given:

The frequency of the radio signal =  [tex]2.00 \times 10^6[/tex] hertz

Distance =[tex]7.30\times 10^10[/tex] meters

To Find:

The time taken for the radio signal to travel from the earth to the spaceship= ?

Solution:

we know that the time taken can be found by dividing the distance travelled by the speed at which the signal travels

So

[tex]Time = \frac{Distance}{Speed}[/tex]

Here the speed of the radio signal is equal the the speed of light

Now substituting the values,

Time taken is

=>[tex]Time = \frac{7.30\times 10^10}{3 \times 10^8}[/tex]

=>[tex]Time = 2.43\times 10^{10-8}[/tex]

=>[tex]Time = 2.43\times 10^2[/tex]

The time taken for the 2×10⁶ Hz radio signal to get to the spaceship from Earth is 243.33 s

Speed is the distance travelled per unit. Mathematically, it can be expressed as:

Speed = distance / time

speed = distance / time

3×10⁸ = 7.3×10¹⁰ / time

Cross multiply

3×10⁸ × time = 7.3×10¹⁰

Divide both sides by 3×10⁸

Time = 7.3×10¹⁰ / 3×10⁸

Time = 243.33 s

Learn more about speed:

https://brainly.com/question/680492

#SPJ5

Answer: $97.20

Explanation:

Convert 60w(x5 because he has 5 bulbs) and 240w to kw to get 0.3kw and 0.24kw and add these together to get 0.54kw. Next multiply 0.54kw with 4 for 4 hours which is 2.16kw then multiply this by 30 to get 64.8kw. Finally multiply 64.8kw by 1.50 to get $97.20

The total bill for 30 days would be $259.20, considering the energy consumed by the bulbs and water heater. We need to calculate the energy consumed by the bulbs and water heater in kilowatt-hours (kWh) and multiply it by the cost per kWh. The energy consumed by the bulbs is 4800Wh per day and the energy consumed by the water heater is 960Wh per day.

To calculate the bill for 30 days, we need to determine the total energy consumed by the bulbs and water heater in kilowatt-hours (kWh) and then multiply it by the cost per kWh.

The energy consumed by the bulbs can be calculated as follows:

Total energy = power of one bulb * number of bulbs * time = 60W * 5 * 4 hours/day = 1200W * 4 hours/day.

So, the total energy consumed by the bulbs each day is 4800Wh.

The energy consumed by the water heater can be calculated as follows:

Energy = power * time = 240W * 4 hours/day.

So, the total energy consumed by the water heater each day is 960Wh.

To convert it to kWh, divide by 1000:

Total energy consumed each day = (4800 + 960)Wh / 1000 = 5.76kWh.

Finally, calculate the total bill for 30 days:

Total bill = total energy consumed each day * cost per kWh * number of days = 5.76kWh * $1.50/kWh * 30 days = $259.20.

-- H₂O is a single molecule of water.  It's made of two Hydrogen atoms and one Oxygen atom.

-- 2 H₂O is two molecules of water.  Between them, they have a total of four Hydrogen atoms and two Oxygen atoms. (C)

The number of hydrogen atoms in 2H₂O  is 4 atoms.

The compound is water . And the water can be interpreted as 2 molecules of water.

H₂O → Water

2H₂O →  2 molecules of water.

The number of hydrogen atoms in 2 molecules of water is the individual number of hydrogen atoms in the compound.

Therefore, the number of hydrogen atom in the compounds is as follows:

2H₂O → 2 × 2 = 4 atoms of hydrogen.

The number of hydrogen atom is 4.

read more: https://brainly.com/question/19319859?referrer=searchResults

Answer:

light travels faster than sound

Answer:c is the answer every 2 hours A is just plain no B four hours is too long and D is a no you need to rest

Explanation:

Answer:

C

Explanation:

Answer:

Forces affect how objects move. They may cause motion; they may also slow, stop, or change the direction of motion of an object that is already moving. Since force cause changes in the speed or direction of an object, we can say that forces cause changes in velocity. ... So forces cause acceleration.

Answer:

Its called force

Explanation:

Answer:

The color corresponds to the electromagnetic spectrum of light waves.

Explanation:

The group electromagnetic waves are called the electromagnetic spectrum. They have been arranged according to the frequency as well as the wavelength. Further these have been grouped in sections like radio waves, microwaves, infrared waves, ultraviolet rays, X- rays and gamma rays. The graph formed are in form of radiant colors. Every color has some specific response pattern. The shortest wave is the violet color where the longest one is red. Being the shortest wave have the highest energy for all the visible light spectrum. The energy is high as well as the frequency and vibration are shortest. The energy of red is least.

Mitosis

Penicillium reproduces asexually and forms genetically identical spores by mitosis.

Explanation:

In fungi, spores are produced in a structure called sporangium. This is a bulb-like structure at the tip of the sporangiophore. The parent cells (usually haploid because the fungi spend most of their life cycle in the haploid phase) divides and produces spores by mitosis. This produces haploid spores that are dispersed and readily germinate into haploid hyphae.

Learn More:

For more on asexual reproduction in fungi check out;

https://brainly.com/question/3180938

https://brainly.com/question/12110653

#LearnWithBrainly

Answer:

C

Explanation:

Because...

A= Incideant ray

B= Angle of inciderance

C= angle of reflection

D= reflection ray

Answer:

B

Explanation:

Answer:

Time = 0.64 s

Explanation:

Given:

Displacement of the storage cabinet is, [tex]S=2\ m[/tex]

As the object falls from the top, so initial velocity is, [tex]u=0\ m/s[/tex]

Also, the acceleration of the storage cabinet is due to gravity only.

So, acceleration of the storage cabinet is, [tex]a=9.8\ m/s^2[/tex]

Now, in order to find the time taken to reach the floor, we have to use the equation of motion that relates displacement, initial velocity, acceleration and time.

So, the equation of motion used is given as:

[tex]S=ut+\frac{1}{2}at^2[/tex]

Plug in the given values and solve for time 't'. This gives,

[tex]2=0+\frac{1}{2}(9.8)(t^2)\\\\2=4.9t^2\\\\t^2=\frac{2}{4.9}\\\\t^2=0.4082\\\\t=\sqrt{0.4082}\\\\t=0.64\ s[/tex]

Therefore, the storage cabinet takes 0.64 seconds to reach the floor.

The maximum efficiency is 10%

Explanation:

The maximum efficiency of a machine is given by:

[tex]\eta=1-\frac{T_C}{T_H}[/tex]

where

[tex]T_H[/tex] is the temperature of the hot reservoir

[tex]T_C[/tex] is the temperature of the cold reservoir

For the machine in this problem, we have:

[tex]T_H=400K[/tex] is the temperature of the hot reservoir

[tex]T_C=360K[/tex] is the temperature of the cold reservoir

substituting, we find the max efficiency:

[tex]\eta=1-\frac{360}{400}=0.1[/tex]

So, the efficiency is 0.10 (10%).

Learn more about temperature:

brainly.com/question/1603430

brainly.com/question/4370740

#LearnwithBrainly

Answer:

10.0%

Explanation:

Answer:

The four ligths will share the same voltage.

Explanation:

Parallel connected circuits stand out for sharing the same voltage between nodes, the voltage source is connected to two nodes and each node shares the same common point between lights.

In the attached image we can see four lights connected between two nodes, and sharing the same voltage of the voltage source.

Answer:

Because the chemical reaction cools down, releasing excessive heat into its surroundings, which we interpret as heat.

Explanation:

Answer:

The work done against friction is the work done on an object that overcomes this frictional force allowing the object to move - it doesn't include any extra work used to accelerate an object for example - only the work used to beat the frictional force.

Explanation:

Answer: Commercialism

Explanation: Because one organism is benefited and one stay neutral

Eustress can act as a positive force that helps reach one's goals by fostering optimal performance and well-being. It is different from distress, which has negative effects on health and productivity.

The option that can help reach your goals is A) eustress. Eustress is a type of stress that acts as a positive, motivating force. It is associated with feelings of optimism, optimal health, and peak performance levels. When managed well, this kind of stress can enhance well-being and productivity, as is the case with athletes experiencing pregame stress or students experiencing stress before a major exam that may lead to improved memory recall. Contrarily, too much stress, known as distress, can have the opposite effect, highlighting the importance of maintaining stress at an optimal level for positive outcomes.

Answer:

Amplitude is the vertical distance between a ridge and the midpoint of the wave.

Explanation:

A mechanical wave is a disturbance that travels through a material or substance that is a medium of the wave. For example, when a tense string is pressed, the disturbance caused spreads along it in the form of a wave pulse. The disturbance in this case consists in the variation of The Shape of the string from its equilibrium state

it is important to know:

Crest: the crest is the highest point of this amplitude.

Period: the period is the time it takes the wave to go from one point of maximum amplitude to the next.

Amplitude: amplitude is the vertical distance between a crest and the midpoint of the wave.

Frequency: number of times that vibration is repeated.

Valley: it is the lowest point of a wave.

Wavelength: distance between two consecutive ridges of this size.

Transverse wave velocity.-

The propagation speed of a wave on a string (v) is proportional to the square root of the string tension (T) and inversely proportional to the square root of the linear density (μ) of the string:

[tex]v = \sqrt{\frac{T}{μ} }[/tex]

Answer:

A

Explanation:

Answer:

The answer is A)

Explanation:

The wall pushes back on you with the same force.

This is easily analyzed since when pushing or applying force toward the wall it does not move, it can be said that the system is in balance, this mathematically corresponds to that the sum of forces will be equal to zero, for this to be true the wall must apply an equal force and opposite to the force applied on the wall.

The above corresponds to newton's third law which says: Newton's Third Law also known as the principle of action and reaction tells us that if a body A exerts an action on another body B, it performs on another action-equal and of opposite sense.

An example of this can be seen in the attached image.

When you push against a brick wall, the wall pushes back with the same force, according to Newton's third law of motion.

When you push against a brick wall, according to Newton's third law of motion, the answer is A.) The wall pushes back on you with the same force. Newton's third law of motion states that for every action, there is an equal and opposite reaction.

This means that any force exerted on a body will produce a reaction force from the body that is equal in size but opposite in direction. Therefore, when you push on a brick wall, the wall pushes back with the same force, but the wall is firmly in place, due to its high mass and the friction between the wall and its foundation, which makes it seem immovable.

https://brainly.com/question/2057822

#SPJ6

Answer:

Petroleum

Explanation:

Water has a boiling point of 100°C meaning it will start to boil once the temperature reach 100° Celsius meanwhile

Petroleum's boiling point will change based on which petroleum product it is.

For example

LPG (which is a petroleum product)will boil at 40°C.

Answer:

Petroleum

Explanation:

According to the kinetic molecular theory, the pressure of a gas in a container will increase if the number of collisions with the container wall increases.

Explanation:

Keeping the volume of the vessel constant, if we increase the amount of gas in it; the pressure will increase. This is because when the number of gas particles increases in that limited volume, they hit the walls of the container with more energy and hence, the overall pressure of the gas increases.

If we decrease the amount of gas in the vessel or increase the volume for the same amount of gas, the pressure decreases. As the pressure inside the vessel depends upon the gas supplied in the container.

Answer:

Distance covered by Neva = 300 m

Displacement of Neva = 0 m

Explanation:

Given:

Length of the pool = 50 meter

Number of laps Neva swam = 3

1 lap is to swim to the other side and back.

To find the distance and displacement.

Solution:

To calculate the distance swum by Neva we will find the total length covered by Neva in 3 laps.

1 lap is 50 meters to the other side and 50 meters back

So, the length of 1 lap = [tex]50\ m+50\ m=100\ m[/tex]

Total length of 3 laps = [tex]3\times 100\ m = 300\ m[/tex]

To calculate the displacement we will find the distance between initial position and final position.

We, see that on completing 3 laps Neva returns to her starting point. Thus the initial and final position are the same. Do, the distance between initial position and final position will be = 0 m

Distance covered by Neva = 300 m

Displacement of Neva = 0 m

The distance Neva swam is 300 meters, while her displacement is zero meters.

To determine the distance Neva swam:

              3 laps × 100 meters/lap = 300 meters.

Displacement refers to the change in position from the starting point.

Since Neva ends up at the same point where she started after swimming 3 laps, her displacement is zero meters.

Hence,

Answer:

What is Newton's Disc?

This is a type of disc that is divided into the rainbow colors (red, orange,yellow, green, blue, indigo and violet).

How does it show that light is composed of many colours?

When the Newton disc is spun, it produces a white light. This means that light is made up of rainbow colors.

Explanation:

Newton's disc is commonly used in experiments. This is an idea introduced to us by Isaac Newton, an influential scientist who greatly contributed to science. The disc is described as a color wheel, in which the different rainbow colors are shown. Once you spin the wheel, you'd be able to see the different colors blending in. It turns into one color and that is "white."

Answer:

Explanation: light has been described as a particle and a wave

Answer: A.

Explanation: Roughly 180 - 200 million years ago, just before the first dinosaurs evolved. Mammals themselves evolved from a group or reptiles which exhibited mammal-like traits. One of them was specialized teeth. Reptiles tend to have teeth all the same shape. The mammal-like reptiles evolved tiny teeth in front of the jaw and two pairs of over sized fangs along the the sides. Like modern mammals, the head was large in proportion to the rest of the body. The jaws were also evolving another mammal trait, the ability to move sideways. Despite the lack of specialized teeth, acute hearing and the ability to chew, the dinosaurs evolved an adaptation which made them far more successful than mammals--modified leg bones. These limbs could be articulated directly under their bodies. This enabled the legs to support more weight, since the limbs were now under the body instead of at the sides. Then dinosaurs did something which secured their dominance for the next 120 million years - they began to stand on two legs. Although the back was still parallel to the ground, running on two legs greatly increased the dinosaur's speed. Mammals could simply not compete with swift, giant predators and were forced to remain small, and most became nocturnal to evade dinosaurs which were probably active during the day. Despite that they managed to survive which allowed the further evolution of mammals into us, humans.

In the Cenozoic period only mammals were alive. All dinosaurs had gone extinct leaving animals such as cave lions, woolly mammoths, and cave bears. Considering that Dinosaurs had gone extinct roughly 66 million years ago in the Cretaceous era and the Cenozoic era was 66 million years ago, the beginning of the Cenozoic era started with the extinction of dinosaurs.

Answer: D

Answer:

[tex]\displaystyle \vec a=-\frac{0.5\vec v_o}{t}[/tex]

[tex]\displaystyle \vec F_{net}=-\frac{0.5\vec v_om}{t}[/tex]

[tex]\vec v_f-\vec v_o=-0.5\vec v_o[/tex]

Explanation:

Dynamics

The dynamics of an object on which a net force is applied are explained by Newton's laws. The net force equals the product of the mass of the object by its acceleration

[tex]\vec F_{net}=m\vec a[/tex]

The formulas for the accelerated motion gives us other relevant magnitudes like the velocity

[tex]\vec v_f=\vec v_o+\vec a\ t[/tex]

Since all the magnitudes are vectors, given an initial state and a final state, their average values only depend on the difference of their states.

We know during the move from A to B, and object decreases its veclocity by half. It means

[tex]\vec v_f=0.5\vec v_o[/tex]

It that happened in a time t, then the average acceleration was

[tex]\displaystyle \vec a=\frac{\vec v_f-\vec v_o}{t}[/tex]

[tex]\displaystyle \vec a=\frac{0.5\vec v_o-\vec v_o}{t}[/tex]

[tex]\displaystyle \vec a=-\frac{0.5\vec v_o}{t}[/tex]

If the object has a mass m, the net force is

[tex]\displaystyle \vec F_{net}=m\vec a=-m\ \frac{0.5\vec v_o}{t}[/tex]

[tex]\displaystyle \vec F_{net}=-\frac{0.5\vec v_om}{t}[/tex]

Finally, the average velocity was

[tex]\vec v_f-\vec v_o=-0.5\vec v_o[/tex]

Average acceleration can be found using Δv/Δt and is negative if the particle is slowing down. Average net force requires the particle's mass and acceleration, which is calculated using Newton's second law. Average velocity is zero if the net displacement is zero.

The question deals with finding the average acceleration, average net force (Fnet), and average velocity of a particle during a motion where the velocity decreases by half.

For the average acceleration, one would typically use the formula a_avg = Δv / Δt, where Δv is the change in velocity and Δt is the change in time. Since the velocity is decreasing and acceleration is given as negative when the particle is slowing down, the acceleration vector will also be negative.

To determine average Fnet, one could use Newton's second law, F = ma, once the mass of the object and the average acceleration are known. However, without the mass, we cannot calculate the average net force.

In terms of average velocity, it would be calculated as the total displacement divided by the total time. In a scenario where the net displacement is zero (such as a round trip), the average velocity would also be zero.

The half-life of a substance describes the time in which it takes for half of the radioactive isotope to decay into another form. In your question, it says that the half life of radon-222 is 3.82 days; in a 100g sample of radon, 3.82 days pass and 50g of that isotope is left.

7.64 days is the equivalent to two half lives (7.64/3.82), so only half of half of 100%, or 25%, of the isotope would remain. The answer is D

Hope that helps

Answer:

An electric generator is a device that converts mechanical energy obtained from an external source into electrical energy as the output. ... Instead, it uses the mechanical energy supplied to it to force the movement of electric charges present in the wire of its windings through an external electric circuit.

Explanation:

Answer:

The difference in electrical potential is the difference of electrons from one site with respect to another, when this occurs those of the site where there is more they move to the site where there is less. This is what is known as electric current. The difference of electrons from one site to another is measured in Volts, the more volts the more difference there is in the amount of electrons from one site to the other and therefore more electrons will run to there as soon as they can.

The upper vessel has a potential (in this case gravitational) and the one below another. If the two are joined with a pipe, a stream of water starts from one to another container. This happens, for example, with any electric (electric-generated) battery, by joining the two (+) and (-) poles as they are at different electric potential an electric current (of electrons) starts between them.

An electric generator maintains a difference in electrical charges between two points, called poles, terminals or terminals, so this electrical energy can be converted into other forms of energy.

Answer:

Option A

[tex]5 m/s^{2}[/tex]

Explanation:

From fundamental equation of motion

[tex]v^{2}=u^{2}+2as[/tex] where v is the final velocity, u is the initial velocity, a is the acceleration of the body and s is the displacement.

Since the initial velocity is zero

[tex]v^{2}=2as[/tex]

Making acceleration, a the subject of the formula then

[tex]a=\frac {v^{2}}{2s}[/tex]

Substituting 5 m/s for v and 2.5 m for s then

[tex]a=\frac {5^{2}}{2\times 2.5}=5 m/s^{2}[/tex]