Answer:
A) Metals
Explanation: They mainly explain metals in "periodic table" well it's in it too.
Which is the next logical step in balancing the given equation?
3CO(g) + Fe2O3(s) Fe(s) + 3CO2(g)
A.Place the coefficient 2 in front of iron(III) oxide.
B.Place the coefficient 2 in front of iron(III) oxide.
C.Place the coefficient 2 in front of elemental iron.
D.Replace the coefficient 3 in carbon monoxide with 6.
somebody help pleaseeee ):
Answer: C. Place the coefficient 2 in front of elemental iron.
Explanation: The given chemical reaction is
3CO(g) + Fe2O3(s) → Fe(s) + 3CO2(g)
As we can see that stiochiometric coefficient of Carbon is balanced and oxygen coefficient is also balanced. The atom left with unbalanced coefficient is Fe.
Thus By Placing the coefficient 2 in front of the elemental iron will lead to the balanced equation.
Thus the balanced equation can be written as -
3CO(g) + Fe2O3(s) → 2Fe(s) + 3CO2(g)
A solution is made by mixing 15.0 g of sr(oh)2 and 55.0 ml of 0.200 m hno3.
a. write a balanced equation for the reaction that occurs between the solutes.
b. calculate the concentration of each ion remaining in solution.
c. is the resultant solution acidic or basic?
After a balanced neutralization reaction between Sr(OH)2 and HNO3, the unused Sr(OH)2 determines the solution is basic.
Explanation:To address this question, let's first write down the balanced equation for the reaction between strontium hydroxide (Sr(OH)2) and nitric acid (HNO3) which is:
Sr(OH)2 (aq) + 2HNO3 (aq) → Sr(NO3)2 (aq) + 2H2O (l)
Now let's calculate the moles of HNO3 added:
Volume of HNO3 = 55.0 mL = 0.055 L
Concentration of HNO3 = 0.200 M
Moles of HNO3 = Volume × Concentration = 0.055 L × 0.200 M = 0.011 mol
Next, calculate the moles of Sr(OH)2:
Mass of Sr(OH)2 = 15.0 g
Molar mass of Sr(OH)2 = 121.63 g/mol (approximately)
Moles of Sr(OH)2 = Mass ÷ Molar mass = 15.0 g ÷ 121.63 g/mol = 0.123 mol
According to the stoichiometry of the balanced equation, we need twice as many moles of HNO3 to react completely with Sr(OH)2. In this scenario, we have excess Sr(OH)2 (0.123 mol) compared to HNO3 (0.011 mol). Hence, all of the HNO3 will react, leaving some Sr(OH)2 unreacted.
After reaction, moles of Sr(OH)2 remaining = 0.123 mol - (0.011 mol × 1/2) = 0.1175 mol
The concentration of remaining Sr(OH)2 can be calculated by assuming the final volume is the sum of the volumes of the solutions mixed, which is an approximation for dilute solutions.
Since all the HNO3 has reacted, the resulting solution will be basic due to the excess Sr(OH)2 remaining.
Learn more about Neutralization Reaction here:https://brainly.com/question/11403609
#SPJ3
(a) The balanced equation for the reaction between the solutes is: [tex]\text{Sr(OH)}_2(aq) + 2\text{HNO}_3(aq) \rightarrow \text{Sr(NO}_3\text{)}_2(aq) + 2\text{H}_2\text{O}(l)[/tex]. (b) The concentrations of ions are: Sr²⁺ is 2.136 M, NO₃⁻ is 0.2 M, and OH⁻ is 4.272 M. (c) Resultant solution is basic in nature.
To solve the given problem, let's follow the steps one by one:
(a) Write a balanced equation for the reaction that occurs between the solutes.
Strontium hydroxide Sr(OH)₂ reacts with nitric acid HNO₃ to form strontium nitrate Sr(NO₃)₂ and water:
[tex]\text{Sr(OH)}_2(aq) + 2\text{HNO}_3(aq) \rightarrow \text{Sr(NO}_3\text{)}_2(aq) + 2\text{H}_2\text{O}(l)[/tex]
(b) Calculate the concentration of each ion remaining in solution.
1. Determine the moles of each reactant:
- Moles of Sr(OH)₂:
[tex]\text{Molar mass of Sr(OH)}_2 = 87.62 \, (\text{Sr}) + 2 \times 16.00 \, (\text{O}) + 2 \times 1.01 \, (\text{H}) = 121.64 \, \text{g/mol} \\\\\text{Moles of Sr(OH)}_2 = \frac{15.0 \, \text{g}}{121.64 \, \text{g/mol}} \approx 0.123 \, \text{mol}[/tex]
- Moles of HNO₃:
[tex]\text{Molarity of HNO}_3 = 0.200 \, \text{M} \\\\\text{Volume of HNO}_3 = 55.0 \, \text{mL} = 0.055 \, \text{L} \\\\\text{Moles of HNO}_3 = 0.200 \, \text{mol/L} \times 0.055 \, \text{L} = 0.011 \, \text{mol}[/tex]
2. Determine the limiting reactant:
According to the balanced equation, 1 mole of Sr(OH)₂ reacts with 2 moles of HNO₃. Therefore, the reaction requires:
[tex]\text{Moles of HNO}_3 \text{ required} = 0.123 \, \text{mol Sr(OH)}_2 \times 2 = 0.246 \, \text{mol}[/tex]
Since we only have 0.011 moles of HNO₃, it is the limiting reactant.
3. Calculate the remaining moles of Sr(OH)₂:
[tex]\text{Moles of Sr(OH)}_2 \text{ reacted} = \frac{0.011 \, \text{mol HNO}_3}{2} = 0.0055 \, \text{mol} \\\\\text{Remaining moles of Sr(OH)}_2 = 0.123 \, \text{mol} - 0.0055 \, \text{mol} = 0.1175 \, \text{mol}[/tex]
4. Determine the concentrations of ions in the solution:
- Volume of the final solution = volume of HNO₃ + volume of water from Sr(OH)₂ dissolution (approximately equal to volume of water added):
Assuming the solution volume remains approximately 55.0 mL + a negligible volume from Sr(OH)₂, the final volume is roughly 0.055 L.
- Concentration of Sr²⁺ ions:
Since only 0.0055 moles of Sr(OH)₂ reacted to form Sr(NO₃)₂, 0.1175 moles of Sr(OH)₂ remain, giving the concentration of Sr²⁺:
[tex]\text{Concentration of Sr}^{2+} = \frac{0.1175 \, \text{mol}}{0.055 \, \text{L}} \approx 2.136 \, \text{M}[/tex]
- Concentration of NO₃⁻ ions:
All HNO₃ dissociates, producing:
[tex]\text{Concentration of NO}_3^{-} = \frac{0.011 \, \text{mol}}{0.055 \, \text{L}} = 0.2 \, \text{M}[/tex]
- Concentration of OH⁻ ions:
From Sr(OH)₂, OH⁻ concentration:
[tex]\text{OH}^{-} \text{ from Sr(OH)}_2: \text{2 moles OH}^{-}\text{ per mole of Sr(OH)}_2 \\\\\text{Concentration of OH}^{-} = 2 \times \frac{0.1175 \, \text{mol}}{0.055 \, \text{L}} \approx 4.272 \, \text{M}[/tex]
(c) Is the resultant solution acidic or basic?
To determine if the solution is acidic or basic, we compare the concentrations of H⁺ and OH⁻. Since HNO₃ (a strong acid) was completely neutralized and excess Sr(OH)₂ (a strong base) remains, the solution will be basic due to the presence of significant OH⁻ ions.
Summary
- Balanced equation:
[tex]\text{Sr(OH)}_2(aq) + 2\text{HNO}_3(aq) \rightarrow \text{Sr(NO}_3\text{)}_2(aq) + 2\text{H}_2\text{O}(l)[/tex]
- Concentrations of ions in solution:
[tex]\text{Sr}^{2+}: 2.136 \, \text{M} \\\\ \text{NO}_3^{-}: 0.2 \, \text{M} \\\\ \text{OH}^{-}: 4.272 \, \text{M} \\\\[/tex]
- Resultant solution is basic due to the presence of excess OH⁻ ions.
Convert 870 kg to pounds
In a chemical reaction, water decomposes to form hydrogen and oxygen. Which term names the water? A. an element B. an atom C. a product D. a reactant
The term that name the water in a chemical reaction that water decomposes is.
reactant ( answer D)
Explanation
Reactant is a substance that take part in and undergoes change during a reaction. In other words reactant are consumed to form product.
water is reactant when it decomposes because it is consumed to form hydrogen and oxygen.
The decomposition of water is as below equation,
2H2O→ 2 H2 + O2
Pure magnesium metal is often found as ribbons and can easily burn in the presence of oxygen. when 4.81 g of magnesium ribbon burns with 7.46 g of oxygen, a bright, white light and a white, powdery product are formed
Final answer:
When magnesium ribbon burns with oxygen, it forms a bright, white light and a white, powdery product called magnesium oxide (MgO).
Explanation:
When magnesium ribbon burns with oxygen, it forms a bright, white light and a white, powdery product called magnesium oxide (MgO). The chemical equation for this reaction is:
2Mg (s) + O₂(g) → 2MgO (s)
This is an example of a combination reaction where an element (magnesium) combines with oxygen to form an oxide. The reaction is accompanied by the release of heat and light.
calculate the number of Kilojoules to warm 125 g of iron from 23.5 C to 78.0 C
The perspective formula of threonine, an amino acid with two asymmetric centers, is provided below. perspective formula of threonine add either an h, oh, or nh2 group to complete the fischer projection for threonine.
Why must you carry out the oxidation of cu with hno3 in a fume hood?
Water boils at 373 K. The molar enthalpy of vaporization for water is 40.7 kJ/mol. If one mole of water is at 373 K when it starts to boil, its temperature when it all has boiled will be ____________________. a. 273 K c. 373 K b. 343 K d. 413 K
Answer: c. 373 K
Explanation:
Which base would not effectively deprotonate acetylene? (ch3)2nli ch3och2mgbr lioch3 ch3li kh?
Acetylene has a chemical formula which can be written as:
C2H2
We can see that there are two positive ions, H+. Now what deprotonation means is that the H+ is removed from acetylene to form acetylene ion and water. In this case, I believe that the answer would be:
LiOCH3
LiOCH₃ would not effectively deprotonate acetylene
Further explanationThe equilibrium reaction can be determined if the pKa or Ka values of the acid and conjugate acids (acids in the product) are known.
So it can be concluded that the reacting acid can protonate the base or vice versa base compounds can deprotonating the acid in the reaction, so that the reaction can proceed to the right to form a product or not
In an acid-base reaction, it can be determined whether or not a reaction occurs by knowing the value of pKa or Ka from acid and conjugate acid
Acids and bases according to Bronsted-Lowry
Acid = donor (donor) proton (H + ion)Base = proton (receiver) acceptor (H + ion)If the acid gives (H⁺), then the remaining acid is a conjugate base because it accepts protons. Conversely, if a base receives (H⁺), then the base is formed can release protons and is called the conjugate acid from the original base.
The value of the equilibrium constant (K)
Can be formulated:
K acid-base reaction = Ka acid on the left / K acid on the right.
or:
pK = acid pKa on the left - pKa acid on the right
K = equilibrium constant for acid-base reactions
pK = -log K
[tex]\large{\boxed{\bold{K\:=\:10^{-pK}}}}[/tex]
K value> 1) indicates the reaction can take place, or the position of equilibrium to the right.
There is some data that we need to complete from the problem above, the pKa value of the conjugated acid from the base of the compounds above
1. (CH₃)₂NLi, pKa = 382. CH₃OCH₂MgBr, pKa = 503. LiOCH₃, pKa = 164. CH₃Li, pKa = 505. KH, pKa = 50Whereas the pKa of Acetylene (C₂H₂) itself is = 25
From the conjugated acid pKa value of some of the bases above shows only LiOCH₃ bases that cannot deprotonate acetylene because the pKa value is smaller than the pKa acetylene
The reactions that occur are:
LiOCH₃ + HC ≡ CH ---> HOCH₃ + LiC = CH
The value of the equilibrium constant K is
pK = pKa acetylene - pKa HOCH₃
pK = 25-16
pK = 9
[tex]K\:=\:10^{-pK}[/tex]
[tex]K\:=\:10^{-9}[/tex]
K values <1 indicate a reaction cannot occur
Learn more
the lowest ph
https://brainly.com/question/9875355
the concentrations at equilibrium.
https://brainly.com/question/8918040
the ph of a solution
https://brainly.com/question/9560687
Keywords : pKa, acetylene, deprotonate, the conjugate acid
Which substance is the reducing agent in this reaction? 16h++2cr2o72−+c2h5oh→4cr3++11h2o+2co2?
Answer is: the reducing agent is C₂H₅OH.
Balanced chemical reaction:
16H⁺ + 2Cr₂O₇²⁻ + C₂H₅OH → 4Cr³⁺ + 11H₂O + 2CO₂.
Oxidation half reaction: Cr₂O₇²⁻ + 14H⁺ + 6e⁻ → 2Cr³⁺ + 7H₂O/ ×2.
2Cr₂O₇²⁻ + 28H⁺ + 12e⁻ → 4Cr³⁺ + 14H₂O.
Reduction half reaction: C₂H₅OH + 3H₂O → 2CO₂ + 12H⁺ + 12e⁻.
Net reaction: 2Cr₂O₇²⁻ + 28H⁺ + C₂H₅OH + 3H₂O → 4Cr³⁺ + 14H₂O + 2CO₂ + 12H⁺.
Reducing agent is element or compound who loose electrons in chemical reaction. Ethanol (C₂H₅OH) lost electrons and it is oxidized to carbon dioxide (CO₂).
The reducing agent in the reaction is [tex]\boxed{\text{C}_{2}\text{H}_{5}\text{OH}}[/tex].
Further Explanation:
Redox reaction:
Redox is a term that is used collectively for the reduction-oxidation reaction. It is a type of chemical reaction in which the oxidation states of atoms are changed. In this reaction, both reduction and oxidation are carried out simultaneously. Such reactions are characterized by the transfer of electrons between the species involved in the reaction.
The process of gain of electrons or the decrease in the oxidation state of the atom is called reduction while that of loss of electrons or the increase in the oxidation number is known as oxidation. In redox reactions, one species lose electrons and the other species gain electrons. The species that lose electrons and itself gets oxidized is called as a reductant or reducing agent. The species that gains electrons and gets reduced is known as oxidant or oxidizing agent. The presence of redox pair or redox couple is a must for the redox reaction.
The general representation of a redox reaction is,
[tex]\text{X}+\text{Y}\rightarrow\text{X}^{+}+\text{Y}^{-}[/tex]
The oxidation half-reaction can be written as:
[tex]\text{X}\rightarrow\text{X}^{+}+e^{-}[/tex]
The reduction half-reaction can be written as:
[tex]\text{Y}+e^{-}\rightarrow\text{Y}^{-}[/tex]
Here, X is getting oxidized and its oxidation state changes from to +1 whereas B is getting reduced and its oxidation state changes from 0 to -1. Hence, X acts as the reducing agent, whereas Y is an oxidizing agent.
Rules to calculate the oxidation states of elements:
1. The oxidation number of free element is always zero.
2. The oxidation number of oxygen is generally taken as -2, except for peroxides.
3. The oxidation state of hydrogen is normally taken as +1.
4. The sum of oxidation numbers of all the elements present in a neutral compound is zero.
5. The oxidation numbers of group 1 and group 2 elements are +1 and +2 respectively.
The oxidation state of O is -2.
The expression to calculate the oxidation number in [tex]\text{Cr}_{2}\text{O}_{7}^{2-}[/tex] is:
[tex]\left[2(\text{Oxidation state of Cr})+7(\text{oxidation state of O})\right]=-2[/tex] ...... (1)
Rearrange equation (1) for oxidation number of Cr
[tex]2(\text{Oxidation number of Cr})=\left[(-2)-7(\text{oxidation number of O})\right][/tex] …… (2)
Substitute -2 for oxidation state of O in equation (2).
[tex]\begin{aligned}\text{Oxidation state of Cr}&=\dfrac{[(-2)-7(-2)]}{2}\\&=\dfrac{[-2+14]}{2}\\&=+6\end{aligned}[/tex]
The charge on Cr is +3 so its oxidation state is also +3. The oxidation state of Cr changes from +6 to +3. This shows it decreases during the reaction and therefore Cr is an oxidizing agent.
The oxidation state of O is -2 and the oxidation state of H is +1.
The expression to calculate the oxidation in [tex]\text{C}_{2}\text{H}_{5}\text{OH}[/tex] is:
[tex]\left[2(\text{oxidation state of C})+1(oxidation state of O)+6(oxidation state of H)\right]=0[/tex] ...... (3)
Rearrange equation (3) for oxidation state of C
[tex]2(\text{oxidation state of C})=\left[-1(oxidation state of O)-6(oxidation state of H)\right][/tex] ...... (4)
Substitute -2 for oxidation state of O and +1 for oxidation state of H in equation (4).
[tex]\begin{aligned}\text{Oxidation state of C}&=\dfrac{[-1(-2)-6(+1)]}{2}\\&=\dfrac{[+2-6]}{2}\\&=-2\end{aligned}[/tex]
The oxidation state of O is -2.
The expression to calculate the oxidation state in [tex]\text{CO}_{2}[/tex] is:
[tex]\left[(\text{oxidation state of C})+2(oxidation state of O)\right]=0[/tex] ...... (5)
Rearrange equation (5) for oxidation state of C
[tex](\text{oxidation state of C})=\left[-2(oxidation state of O)\right][/tex] ...... (6)
Substitute -2 for oxidation state of O in equation (6).
[tex]\begin{aligned}\text{Oxidation state of C}&=[-2(-2)]\\&=+4\end{aligned}[/tex]
The oxidation state of C changes from -2 to +4. This shows it increases during the reaction and therefore [tex]\textbf{C}_{2}\textbf{H}_{5}\textbf{OH}[/tex] acts as a reducing agent.
Learn more:
1. Best cleaning agent for burned-on grease: https://brainly.com/question/3789105
2. Oxidation and reduction reaction: https://brainly.com/question/2973661
Answer details:
Grade: High School
Subject: Chemistry
Chapter: Redox reactions
Keywords: redox reaction, C2H5OH, Cr, C, CO2, Cr2O72-, oxidation, reduction, reductant, oxidant, reducing agent, oxidizing agent, electrons, redox pair, redox couple, oxidation state, oxidized, reduced, simultaneously.
Element x reacts with oxygen to produce x2o3 in an experiment it is found that 1.0000 g of x produces 1.1xxx g of x2o3 what is the molar mass of x?
The molar mass of element X is determined in g/mol by taking into account the mole ratio in the X₂O₃ compound. The mass of X (1.0000 g) is first divided by the moles of X, which is two-thirds of the moles of Oxygen, calculated by dividing the mass of Oxygen in X₂O₃ by its molar mass.
Explanation:To calculate the molar mass of element X, the mole ratio in the X₂O₃compound needs to be considered. This mole ratio suggests that for every 1 mole of X, 1.5 moles of Oxygen is used given that from the formula of X₂O₃hat would be 2 moles of X for every 3 moles of oxygen (2:3).
The mass of Oxygen in the compound can be calculated by subtracting the mass of X from the total compound weight. Given that 1.1xxx grams of X₂O₃ was obtained from 1.0000 grams of X, the mass of Oxygen in the compound would be 1.1xxx g - 1.0000 g giving a mass of Oxygen in the compound as 0.1xxx grams.
We know that the molar mass of Oxygen (O) is 16.00 g/mol. So, the number of moles of Oxygen in the compound can be calculated as (0.1xxx g)/(16.00 g/mol) which gives the number of moles for Oxygen. Given the mole ratio from the X₂O₃ formula, the number of moles of X will be two-thirds of the moles of Oxygen.
Finally, the molar mass of X can be calculated by dividing the mass of X (1.0000 g) by the number of moles of X calculated. This will give the answer for the molar mass of X in g/mol.
Learn more about Molar Mass Calculation here:https://brainly.com/question/25879634
#SPJ12
Two liquids – one polar, one nonpolar – have the same molar mass. which one has the higher boiling point?
Insulin, adrenaline, and estrogen are examples of
In the given question, Insulin, adrenaline, and estrogen are examples of hormones. Each hormone has a specific function and plays an important role in maintaining homeostasis in the body.
Insulin is a hormone made up of 51 amino acids and is released by the beta cells of pancreas. It helps in regulating blood glucose level.
Adrenaline is also known as epinephrine. It is produced by the adrenal glands and is involved in the body's "fight or flight" response to stress.
Estrogen is a female sex hormone produced by the ovaries and is involved in the development of female secondary sexual characteristics, such as breast development and the menstrual cycle.
Therefore, examples of hormones are insulin, adrenaline, and estrogen, which are chemical messengers that regulate many physiological processes in the body.
Learn more about Insulin here:
https://brainly.com/question/31251025
#SPJ6
(4 ten thousands 7 tens) × 10
Diatomic molecules of gases at room temperature are due to _________ bonds. ionic
covalent
metallic
none of the above
Question 9 solid sodium chloride is produced by the reaction of chlorine gas and solid sodium . write a balanced chemical equation for this reaction
A 1.248 g sample of limestone rock is pulverized and then treated with 30.00 ml of 1.035 m hcl solution. the excess acid then requires 11.56 ml of 1.010 m naoh for neutralization. part a calculate the percent by mass of calcium carbonate in the rock, assuming that it is the only substance reacting with the hcl solution.
The percentage by mass of calcium carbonate present in rock is [tex]\boxed{{\mathbf{77}}{\mathbf{.62 \% }}}[/tex].
Further Explanation:
First, we have to find the excess number of moles of HCl acid that are neutralized by NaOH.
The number of moles of NaOH in 11.56 ml of 1.010 M NaOH solution is calculated as follows:
[tex]\begin{aligned}{\text{Number of moles of NaOH}}\left({{\text{mol}}}\right)&={\text{Concentration }}\left( {{\text{mol/L}}}\right) \times{\text{Volume }}\left({\text{L}} \right)\\&= 1.010{\text{ mol/L}}\left({11.56{\text{ ml}}\times \frac{{1{\text{ L}}}}{{1000{\text{ml}}}}}\right)\\&=0.011676{\text{ mol}}\\\end{aligned}[/tex]
The balanced chemical reaction of NaOH and HCl is as follows:
[tex]{\text{NaOH}}\left({aq}\right)+{\text{HCl}}\left({aq}\right)\to{\text{NaCl}}\left({aq} \right) +{{\text{H}}_{\text{2}}}{\text{O}}\left( l \right)[/tex]
Since NaOH and HCl are reacted in 1:1 ratio, therefore, the excess number of moles of HCl are equal to number of moles of NaOH that is 0.011676 mol.
Now, we have to find how many moles of HCl initially reacted with limestone.
The initial number of moles of HCl in 30.00 ml of 1.035 M HCl solution is calculated as follows:
[tex]\begin{aligned}{\text{Number of moles of HCl}}\left( {{\text{mol}}}\right)&={\text{Concentration }}\left( {{\text{mol/L}}}\right) \times {\text{Volume }}\left({\text{L}} \right)\\&= 1.035{\text{ mol/L}} \times \left( {30.00{\text{ ml}}\times \frac{{1{\text{ L}}}}{{1000\,{\text{ml}}}}}\right)\\&=0.03105{\text{ mol}}\\\end{aligned}[/tex]
Therefore, the number of moles of HCl initially reacted with limestone is calculated as follows:
[tex]\begin{aligned}{\text{Number of moles of HCl reacted with CaC}}{{\text{O}}_3}&=\left({0.03105{\text{ mol}} - 0.011676{\text{ mol}}}\right)\\&={\text{0}}{\text{.019374 mol of HCl}}\\\end{aligned}[/tex]
Therefore, the number of moles of HCl initially reacted with limestone is 0.019374 mol.
The balanced chemical equation for the reaction of limestone [tex]\left( {{\text{CaC}}{{\text{O}}_{\text{3}}}}\right)[/tex] with HCl is as follows:
[tex]{\text{CaC}}{{\text{O}}_3}\left( s \right) + 2{\text{HCl}}\left( {aq} \right)\to{\text{C}}{{\text{O}}_{\text{2}}}\left( g \right) + {{\text{H}}_{\text{2}}}{\text{O}}\left( l \right) + {\text{CaC}}{{\text{l}}_2}\left( {aq} \right)[/tex]
The balanced chemical equation shows that 1 mole of [tex]{\text{CaC}}{{\text{O}}_3}[/tex] reacted with 2 moles of HCl to neutralize the reaction completely, therefore, the number of moles of [tex]{\text{CaC}}{{\text{O}}_3}[/tex] neutralized by 0.019374 mol of HCl are calculated as follows:
[tex]\begin{aligned}{\text{Amount of CaC}}{{\text{O}}_3}\left( {{\text{mol}}}\right)&= \left( {{\text{0}}{\text{.019374 mol of HCl}}}\right)\left({\frac{{1{\text{ mol CaC}}{{\text{O}}_3}}}{{{\text{2 mol HCl}}}}}\right)\\&=0.009687{\text{ mol CaC}}{{\text{O}}_3}\\\end{aligned}[/tex]
The molar mass of [tex]{\text{CaC}}{{\text{O}}_3}[/tex] is 100.0 g/mol.
Mass of 0.009687 mol of [tex]{\text{CaC}}{{\text{O}}_3}[/tex] is calculated as follows:
[tex]\begin{aligned}{\text{Mass}}\left( {\text{g}}\right)&={\text{Number of moles}} \times{\text{Molarmass}}\left({{\text{g/mol}}}\right)\\&=0.009687{\text{mol}}\times{\text{100}}{\text{.0 g/mol}}\\&=0.9687{\text{g}}\\\end{aligned}[/tex]
The percentage by mass can be calculated as follows:
[tex]\begin{aligned}{\text{Percent by mass}}\left( \%\right)&=\frac{{{\text{Mass of CaC}}{{\text{O}}_3}}}{{{\text{Mass of lime stone}}}}\times 100\\&=\frac{{0.9687{\text{ g}}}}{{1.248{\text{ g}}}}\times 100\\&=77.62{\text{ }}\%\\\end{aligned}[/tex]
Learn more:
1. Best cleaning agent for burned-on grease: https://brainly.com/question/3789105
2. Calculation of moles of NaOH: https://brainly.com/question/4283309
Answer details:
Grade: Senior School
Subject: Chemistry
Chapter: Mole concept
Keywords: Percentage by mass, calcium carbonate in rock, number of moles of HCl, excess number of moles, CaCO3, balance chemical equation, limestone.
Final answer:
To calculate the percent by mass of calcium carbonate in the limestone, we calculate the moles of HCl that reacted with the limestone, subtract the moles neutralized by NaOH, convert this to grams of CaCO₃, and divide by the sample mass.
Explanation:
To calculate the percent by mass of calcium carbonate in the limestone rock, we need to find out how much of the HCl was used to react with the calcium carbonate and not neutralized by NaOH, and then convert this amount to grams of CaCO3.
We start by calculating the number of moles of NaOH that reacted with the excess HCl:
Number of moles of NaOH = Volume (L) × Molarity (M)
Number of moles of NaOH = 0.01156 L × 1.010 M = 0.0116776 mol
Since the reaction between NaOH and HCl is 1:1, the moles of HCl that were neutralized by NaOH are also 0.0116776 mol.
Now we can calculate the moles of HCl that reacted with the CaCO3:
Total moles of HCl initially = Volume (L) × Molarity (M)
Total moles of HCl = 0.03000 L × 1.035 M = 0.03105 mol
Moles of HCl that reacted with CaCO₃ = Total moles of HCl - Moles of HCl neutralized by NaOH
Moles of HCl that reacted with CaCO₃ = 0.03105 mol - 0.0116776 mol = 0.0193724 mol
The reaction between CaCO₃ and HCl is also 1:1:
CaCO₃ + 2HCl → CaCl₂ + H₂O + CO₂
Moles of CaCO₃ = Moles of HCl that reacted with CaCO₃ = 0.0193724 mol
To find the mass of CaCO₃ we multiply the moles of CaCO₃ by the molar mass of CaCO₃ (100.09 g/mol):
Mass of CaCO₃ = Moles of CaCO₃ × Molar Mass of CaCO₃
Mass of CaCO₃ = 0.0193724 mol × 100.09 g/mol = 1.93936 g
Finally, we calculate the percent by mass of CaCO₃ in the rock:
Percent by mass of CaCO₃ = (Mass of CaCO₃ / Mass of Rock Sample) × 100%
Percent by mass of CaCO₃ = (1.93936 g / 1.248 g) × 100% = 155.413%
However, a percent mass over 100% indicates an error in the calculation as it's not possible to have more calcium carbonate than the total mass of the rock. It likely means that we must take into account other substances in the limestone that might react with HCl or a calculation error.
A student titrates an unknown amount of potassium hydrogen phthalate (khc8h4o4, abbreviated khp) with 20.46 ml of 0.1000 m naoh solution. khp has one acidic hydrogen. what mass (in grams) of khp was titrated by the sodium hydroxide solution?
Observation and assessment are most effective when
A. tools are appropriate for the children in your setting and meet professional requirements for quality.
B. the state has selected them as an appropriate tool for you to use.
C. parents select the tools you use.
D. assessments are formal and gather focused information.
Answer:
A. Tools are appropriate for the children in your setting and meet professional requirements for quality.
Explanation:
This is correct! C::
What might happen to a liquid with a freezing point of 32 degrees if its temperature dropped below 30 degrees?
A substance undergoes a change. Which of the following indicates that the change was a chemical change?
a. The substance changed shape.
b. New molecules formed.
c.The substance froze.
d. The substance changed size.
Answer:
The answer is B.
Explanation:
What mass of ammonium thiocyanate must be used if it is to react completely with 6.5 g barium hydroxide octahydrate?
If the atomic number of an element is 6 and its mass number is 15, how many neutrons are in the atom's nucleus?
Atomic Number is the same as the number of protons in an element.
Mass Number is the number of Protons + Neutrons in an element.
Atomic Number: 6 means 6 Protons
Mass Number: 15 means 15 atoms that are a proton/neutron.
We are given out of the 15 atoms, 6 of them are protons, so the other 9 must be Neutrons.
15 - 6 = 9 so there must be 9 Neutrons.
There are 9 Neutrons in atom's nucleus.
Give Brainiest if you think this is the best answer and explanation. Thanks!
Fritz haber was awarded a nobel prize for the processes he invented in which nitrogen and hydrogen gases are combined to make ammonia (nh3) a valuable chemical and a vital nutrient in modern agriculture.if we had 11.3 g of nitrogen and 2 g of hydrogen, how much nitrogen would remain if all the hydrogen was consumed?
3H2 + N2 ........> 2NH3
This means that each 6 grams of hydrogen react with 28 grams of nitrogen. To know how many grams of nitrogen are required to react with 2 grams of hydrogen, we will simply do cross multiplication as follows:
mass of nitrogen = (2 x 28) / 6 = 9.334 grams
Therefore, if we have 11.3 grams of nitrogen, 9.334 grams would react with 2 grams of hydrogen.
remaining mass of nitrogen = 11.3 - 9.334 = 1.966 grams
As a scuba diver descends under water, the pressure increases. at a total air pressure of 2.85 atm and a temperature of 25.0 ∘c, what is the solubility of n2 in a diver's blood? [use the value of the henry's law constant k calculated in part a, 6.26×10−4mol/(l⋅atm).] assume that the composition of the air in the tank is the same as on land and that all of the dissolved nitrogen remains in the blood. express your answer with the appropriate units.
The solubility of nitrogen in a diver's blood at a pressure of 2.85 atm and a temperature of 25.0 ∘c is 1.78 x 10^-3 moles per litre, according to Henry's law.
Explanation:In this context, we will use Henry's law to calculate the solubility of N2 in a diver's blood. According to Henry's law, the solubility of a gas in a liquid is directly proportional to the partial pressure of the gas above the liquid. The equation is: C = P * k, where C is the solubility of the gas in the liquid, P is the partial pressure of the gas, and k is Henry's law constant.
In the given situation, the total pressure is 2.85 atm (which is the sum of the partial pressures of all gases), and the value of Henry's law constant (k) for N2 is 6.26×10−4mol/(l⋅atm). So, the solubility of nitrogen can be calculated by multiplying the pressure by Henry's law constant: C = 2.85 atm * 6.26×10−4mol/(l⋅atm) = 1.78 x 10^-3 mol/L.
Therefore, at a pressure of 2.85 atm and a temperature of 25.0 ∘c, the solubility of nitrogen in a diver's blood is 1.78 x 10^-3 moles per litre.
Learn more about Solubility of Gases here:https://brainly.com/question/14396373
#SPJ12
One cup of fresh orange juice contains 124 mg of ascorbic acid (vitamin c, c6h8o6). given that one cup = 236.6 ml, calculate the molarity of vitamin c in organic juice.
Answer : The molarity of vitamin c in organic juice is, [tex]2.97\times 10^{-3}mole/L[/tex]
Solution : Given,
Mass of ascorbic acid (solute) = 124 mg = 0.124 g [tex](1mg=0.001g)[/tex]
Volume of juice = 236.6 ml
Molar mass of ascorbic acid = 176.12 g/mole
Formula used :
[tex]Molarity=\frac{\text{Moles of solute}\times 1000}{\text{Molar mass of solute}\times \text{volume of solution}}[/tex]
Now put all the given values in this formula, we get the molarity of vitamin c in organic juice.
[tex]Molarity=\frac{0.124g\times 1000}{176.12g/mole\times 236.6ml}=2.97\times 10^{-3}mole/L[/tex]
Therefore, the molarity of vitamin c in organic juice is, [tex]2.97\times 10^{-3}mole/L[/tex]
Final answer:
The molarity of vitamin C in orange juice, where one cup contains 124 mg of ascorbic acid and is equal to 236.6 mL, is approximately 0.00297 M.
Explanation:
To calculate the molarity of vitamin C in orange juice, we can use the formula for molarity:
Molarity = moles of solute / liters of solution
First, we need to find the number of moles of ascorbic acid in one cup of orange juice.
1 cup of orange juice contains 124 mg of ascorbic acid. Since the molar mass of ascorbic acid, C6H8O6, is 176.12 g/mol, we convert the mass from mg to grams and then to moles:
124 mg * (1 g / 1000 mg) * (1 mol / 176.12 g) = 0.000704 mol
Next, we convert the volume from milliliters to liters:
236.6 mL * (1 L / 1000 mL) = 0.2366 L
Now, we can calculate the molarity:
Molarity = 0.000704 mol / 0.2366 L ≈ 0.00297 M
Thus, the molarity of vitamin C in the orange juice is approximately 0.00297 M.
When an antifreeze like salt is used, the freezing point of a solution is lowered. The amount by which it is lowered is called the
The mass of a mouse is around 22 grams (0.022 kg). What is the weight of a mouse on the Moon?
Answer: The weight of the mouse on the Moon is 0.036 N
Explanation:
Weight is defined as the force exerted by the body on any surface. It is also defined as the product of mass of the body multiplied by the acceleration due to gravity.
Mathematically,
[tex]W=mg[/tex]
where,
W = weight of the mouse
m = mass of the mouse = [tex]22g=0.022kg[/tex]
g = acceleration due to gravity on moon = [tex]1.625m/s^2[/tex]
Putting values in above equation, we get:
[tex]W=0.022kg\times 1.625 m/s^2=0.036N[/tex]
Hence, the weight of the mouse on the Moon is 0.036 N
If a room is 212 m long how many hm is it
The room is approximately 0.0212 hectometers long.
To convert the length of the room from meters to hectometers, we need to know that 1 hectometer (hm) is equal to 100 meters (m). Therefore, to convert meters to hectometers, we divide the length in meters by 100.
Given that the room is 212 meters long, we perform the following calculation:
[tex]\[ \text{Length in hectometers} = \frac{\text{Length in meters}}{100} \][/tex]
[tex]\[ \text{Length in hectometers} = \frac{212 \text{ m}}{100} \][/tex]
[tex]\[ \text{Length in hectometers} = 2.12 \text{ hm} \][/tex]
However, to express this length in a more standard form, we can write 2.12 hectometers as 212/10000 hectometers, which simplifies to 212 hm divided by 100, or 2.12 hm. To be more precise, we can express this as a decimal:
[tex]\[ \text{Length in hectometers} = 0.0212 \text{ hm} \][/tex]
Thus, the room is approximately 0.0212 hectometers long.