Considering there are different fields of science and many career involving the matter, I'd say that option D. They learn about the world through observation. makes the most sense in this scenario.
I hope this helps! :)
I think the answer to this is D, I am sorry if I’m wrong
The element chorine is represented by symbol ____. (Capitalization is important.)
the element chlorine is represented by the symbol Cl
All first letters on the Periodic Table are Capitalized. The answer is Cl.
Why isn’t the atomic mass always a whole number?
Atomic mass is never an integer number for several reasons: The atomic mass reported on a periodic table is the weighted average of all the naturally occuring isotopes. Being an average it would be most unlikely to be a whole number. The mass of an individual atom in atomic mass units is the mass relative to carbon-12.
Answer:
This is because the atomic mass ir usually calculated as the weighted average of the masses of the different isotopes of each element taking into account the relative abundance of each of them.
Explanation:
The isotopes of an element are those in which its atomic numbers (that is, the number of protons) are equal, but the number of neutrons is different. Record that protons and neutrons are found in the nucleus of the element. The same chemical element may consist of different atoms, that is, different isotopes. Then the atomic mass of an element is the weighted average mass of its natural isotopes. Therefore, the atomic mass of an element is not an integer. The weighted average means that not all isotopes have the same percentage. In other words, the atomic masses of the chemical elements are usually calculated as the weighted average of the masses of the different isotopes of each element taking into account the relative abundance of each of them.
This produces that the atomic mass don't always be a whole number
Which of the following statements is correct in regards to density?
A-Pressure is directly proportional to density.
B-Pressure is inversely proportional to density.
C-Temperature is directly proportional to density.
D-Temperature and pressure do not affect density.
Pressure is directly related to density implies increase in pressure results in increase in density. Hopes this helps,love! <3
Answer:
Pressure is directly proportional to density.
Explanation:
Which of the following describes a covalent bond?
a)It is the exchange of electrons between atoms with an electronegativity difference above 1.7.
b)It is the exchange of electrons between atoms with an electronegativity difference below 1.7.
c)It is the sharing of electrons between atoms with an electronegativity difference above 1.7.
d)It is the sharing of electrons between atoms with an electronegativity difference below 1.7.
I think it is C, because a covalent bond is a distribution of 2 atoms to 1 electron, meaning they are sharing and not exchanging, and the electronegravity would be above 1.7
Answer:
It is the sharing of electrons between atoms with an electronegativity difference below 1.7.
Explanation:
Covalent bond is the bond which is formed with the sharing of the electrons between the two atoms which are taking part in the bond. It is generally formed between the atoms with similar electronegativity values.
It is the bond which is generally occurs within non metals as they share electrons to complete their octet.
The difference in the electronegativity values of the atoms involving in a covalent bond must not exceed the value of 1.7 .
Correct answer:- It is the sharing of electrons between atoms with an electronegativity difference below 1.7.
Modern atomic theory states that atoms are neutral. How is this neutrality achieved?
Well, in an atom, there are an equal number of protons and electrons so they cancel each other out.
okayy so in atom there is an equivalent amount of protons AND electrons , meaning they would cancel each other out.
calculate the kinetic energy of a 0.25-kg car traveling at a constant velocity of 2 m/s
Hello!
Calculate the kinetic energy of a 0.25 kg car traveling at a constant velocity of 2 m/s
We have the following data:
m (mass) = 0.25 kg
v (velocity) = 2 m/s
KE (kinetic Energy) = ? (in Joule)
Formula to calculate kinetic energy:
[tex]\boxed{KE = \dfrac{1}{2} *m*v^2}[/tex]
Solving:
[tex]KE = \dfrac{1}{2} *m*v^2[/tex]
[tex]KE = \dfrac{1}{2} *0.25*2^2[/tex]
[tex]KE = \dfrac{1}{2} *0.25*4[/tex]
[tex]KE = \dfrac{1}{2}*1[/tex]
[tex]KE = \dfrac{1}{2}[/tex]
[tex]\boxed{\boxed{KE = 0.5\:Joule}}\Longleftarrow(kinetic\:energy)\:\:\:\:\:\:\bf\blue{\checkmark}[/tex]
_______________________
[tex]\bf\green{I\:Hope\:this\:helps,\:greetings ...\:Dexteright02!}\:\:\ddot{\smile}[/tex]
What is a base? chemistry
Answer:
A base is A. a substance that increace the concentration of OH- ions in solution.
Explanation:
According to Arrhenius Theory, a base is any substance that, when dissolved, releases hydroxyl ions (OH–). The bases are also known as alkalis, because when the hydroxyl groups dissociate and release, the pH of the solutions increases, that is, the solution becomes alkaline. Then its pH is greater than 7.
According to the Brønsted-Lowry Theory, a base is a substance capable of accepting protons (H +) in solution.
According to Lewis Theory, the bases are also considered those substances capable of donating or transferring electrons.
So, a base is A. a substance that increace the concentration of OH- ions in solution.
soil formation is a ____ geologic ____ that creates soil from sediment.
A) Destructive; event
B) Constructive; event
C) Destructive; process
D) Constructive; process
D) Constructive; process
Answer:
D) Destructive; process
Explanation:
What layer of the atmosphere are the moon and stars in?
The exosphere is the uppermost layer of Earth's atmosphere
Answer:
The Moon and stars lie outside the Earth's Atmosphere
Explanation:
In order to understand this concept we need to understand what the atmosphere is and how high it extends from the earth's surface.
The atmosphere is a protective envelop around the Earth. It not only protects us from the harmful UV radiations but also helps to retain the heat near the surface due to Green House Effect.
Layers Of the Atmosphere
From lowest to highest, the major layers of the atmosphere are:
tropospherestratospheremesospherethermosphere and exosphereHeight Of the AtmosphereThe Exosphere on the Atmosphere extends up to 10,000 km above the Earth's Surface. The moon is the nearest celestial object to Earth. it is at a distance of 3,84,400 km from earth i.e. more than 38 times the height of the Atmosphere. Stars are farther away from the Earth sometimes almost millions of light years away.
to learn more about Atmosphere, visit https://brainly.com/question/25526298
#SPJ2
Which describes a property of water that allows plants to transfer it from their roots to their leaves
adhesion and cohesion.
Answer:
Cohesion and adhesion properties of water, and capillarity property.
Explanation:
Cohesion refers to the attraction forces of water molecules between them. These cohesive forces are possible due to the water capacity to generate hydrogen bonds.
The cohesive forces are responsible for superficial tension, an example of this is when you fill a glass of water and then put some tears into, it not spills but it forms like a dome of water - You can see the image attached -, anyway this superficial tension is the responsible of make liquids more stablish to break itself when are subdue to stress or tension. The water molecules form hydrogen bonds and "glue" each other with their neighbors and with the molecules who are more deeply into the liquid.
On the other hand, Adhesion allows water "glue" itself, but also adhere to other molecules or material. Adhesion is the attraction of different kinds of molecules, and water can make it very strongly, more if the molecule has positive or negative electric properties.
Adhesion is responsible for capillarity, it happens when water up through a thin glass tube (you can see the image 2 attached), or in the roots of the plants to their leaves. The water climbs through the stem of the plants due to their capacity to adhere to the molecules of the steam, and their capillarity property.
Which of the following is not a polyatomic ion
B: CaCO₃ is a compound in and of itself thus it is not a polyatomic ion.
Which property can be used to distinguish talc from gypsum?
Gypsum has a soapy feel.
Talc has a soapy feel.
Gypsum can scratch glass.
Talc fizzes with hydrochloric acid.
Talc has a soapy feel.
Also, gypsum can scratch talc, but talc cannot scratch gypsum.
Hope This Helps! Have A Nice Feeling!!
Answer:
B. Talc has soapy feel.
Explanation:
Gypsum is a hydrated calcium sulphate mineral .
The chemical formula of gypsum is [tex] CaSO_4.2H_2O[/tex]
It consist of calcium, sulphur, oxygen and hydrogen.
It is soft sulphate mineral. It is used in plaster formation. It is used in blackboard chalk formation.It is used as a fertilizer.It Talc can not scratch gypsum because it is harder than talc.It has no soapy feel.
Talc is hydrous magnesium silicate mineral . It is usually green ,gray, white , brown or colourless.It is a translucent mineral . It has pearly luster.
It is soften known mineral. The chemical formula of talc is [tex]Mg_3Si_4O_{10}(OH)_2[/tex].It consist of magnesium, silicon, oxygen and hydrogen.It has extreme softness and greasy. It has soapy feel. Gypsum is harder than talc and more difficult to scratch.
Hence, the option B is true.
Answer: B. Talc has soapy feel.
What is the concentration (M) of CH3OH in a solution prepared by dissolving 12.5 g of CH3OH in sufficient water to give exactly 230 mL of solution ?
The concentration of CH3OH in the solution is found by converting the given mass to moles and then dividing by the volume of the solution in liters, resulting in a concentration of approximately 1.7 M.
Explanation:To find the concentration of CH3OH in the solution, we first need to convert grams to moles. The molar mass of CH3OH (methanol) is approximately 32.04 g/mol, so you divide 12.5g by 32.04 g/mol to get the amount in moles: around 0.39 mol. Now, concentration is defined as the number of moles of solute (CH3OH in this case) per liter of solution. As the volume given is in mL, we need to convert it to liters by dividing 230 mL by 1000 to get 0.23 L. Finally, dividing the moles of CH3OH by the volume of the solution in liters gives the concentration in M (Molarity), which is about 1.7 M.
Learn more about Molarity here:https://brainly.com/question/8732513
#SPJ3
Which of the following would you except to see in the death of a star that is less than 0.5 solar mass
A. Red giant
B. White dwarf
C. Supernova
D. Planetary nebula
B. White Dwarf.
ExplanationThe star would eventually run out of hydrogen fuel in the core. The core would shrink and heats up. As the temperature in the core increases, some of the helium in the core will undergo the triple-alpha process to produce elements such as Be, C, and O. The triple-alpha process will heat the outer layers of the star and blow them away from the core. This process will take a long time. Meanwhile, a planetary nebula will form.
As the outer layers of gas leave the core and cool down, they become no longer visible. The only thing left is the core of the star. Consider the Chandrasekhar Limit:
Chandrasekhar Limit: [tex]1.4 \;M_\odot[/tex].
A star with core mass smaller than the Chandrasekhar Limit will not overcome electron degeneracy and end up as a white dwarf. Most of the outer layer of the star in question here will be blown away already. The core mass of this star will be only a fraction of its [tex]0.5 \;M_\odot[/tex], which is much smaller than the Chandrasekhar Limit.
As the star completes the triple alpha process, its core continues to get smaller. Eventually, atoms will get so close that electrons from two nearby atoms will almost run into each other. By Pauli Exclusion Principle, that's not going to happen. Electron degeneracy will exert a strong outward force on the core. It would balance the inward gravitational pull and prevent the star from collapsing any further. The star will not go any smaller. Still, it will gain in temperature and glow on the blue end of the spectrum. It will end up as a white dwarf.
TIMED TEST HELP
As the sun heats the earth unevenly, the air rises and falls.
Which factor in the atmosphere does this result from?
arctic chill
Hanley cells
thunderstorms
increase in oxygen gas
Answer:
Answer is B Hanley Cells
Explanation:
HELP NEEDED 20POINTS i have alot of questions of PATTERNS OF INHERITANCE
please i need to get these right
1) A pea plant with round seeds (RR) is crossbred with another pea plant with wrinkled seeds (rr). What is the probability of producing offspring with genotype Rr?
25%
50%
75%
100%
2)What does a completely filled circle represent on a pedigree chart?
A female carrier of a disease
A male carrier of a disease
A female with a disease
A male with a disease
3) In pea plants, the gene for the color of the seed has two alleles. In the following Punnett square shown below, the dominant allele (Y) represents yellow and the recessive allele (y) represents green.
Punnett Square showing a grid that is blank with 4 empty boxes, two columns and two rows. The female parent plant across the horizontal side, top, of the grid indicates a yellow phenotype and a genotype of Yy. The male parent plant along the vertical side of the grid indicates a yellow phenotype and a genotype of YY.
Based on the Punnett square, what percentage of offspring would be expected to have green seeds?
0%
25%
50%
100%
4) Sickle cell anemia is known to run in a family. A pedigree chart for this family is shown below.
The parents are shown at the top and from left to right appear as a half-shaded circle labeled 1 next to a half-shaded square labeled 2. The two are connected by a straight line. Below the parent pair is a vertical straight line connecting to the next row of circles and squares which are the offspring. Starting from left an unshaded square labeled 1, half-shaded circle labeled 2, another half-shaded circle labeled 3, and a completely shaded square are shown labeled 4. All of these are also connected by a horizontal straight line.
What best describes offspring 4?
A female carrier of the disease
A female having the disease
A male carrier of the disease
A male having the disease
5) Which of the following statements accurately describes a pedigree chart?
A pedigree chart tracks inherited traits from parents to offspring.
A pedigree chart is used to predict the genotype of offspring.
A pedigree chart predicts the percentage of offspring that will have a specific trait.
A pedigree chart identifies the phenotype of the organism.
A tall pea plant (Tt) is crossbred with a short pea plant (tt). The following Punnett square shows the separated alleles for two pea plants.
Punnett square showing female parent across the top with a phenotype of tall and a genotype of Tt and a male parent across the side with a phenotype of short and a genotype of tt. Inside the top left box 1 is written, inside the top right box 2 is written, inside the bottom left box 3 is written, inside the bottom right box 4 is written.
Which of the following shows the correct match of the box numbers and the genotype of the offspring?
1 = Tt; 2 = tt; 3 = Tt; 4 = tt
1 = Tt; 2 = Tt; 3 = Tt; 4 = Tt
1 = Tt; 2 = Tt; 3 = tt; 4 = tt
1 = Tt; 2 = tt; 3 = tt; 4 = tt
Which of the following statements is true?
A pedigree chart tracks inherited traits, and a Punnett square is used to predict the genotype of offspring.
A Punnett square tracks inherited traits, and a pedigree chart is used to predict the genotype of offspring.
A pedigree chart predicts the percentage of offspring that will have a specific trait, and a Punnett square tracks which organisms are carriers for a specific trait.
A Punnett square tracks family traits, and a pedigree chart identifies the phenotype of the organism.
A pedigree chart tracks inherited traits, and a Punnett square is used to predict the genotype of offspring. A pedigree chart provides a visual representation of the inheritance of traits within a family, while a Punnett square is a tool used to predict the likelihood of an offspring inheriting particular genotypes from its parents.
The answers to the questions are as follows:
1) The probability of producing offspring with genotype Rr when crossing a pea plant with round seeds (RR) with another pea plant with wrinkled seeds (rr) is 100%. This is because all offspring will inherit one R allele from the round-seeded parent and one r allele from the wrinkled-seeded parent, resulting in the Rr genotype for all offspring.
2) A completely filled circle on a pedigree chart represents a male with a disease. An unfilled circle represents a female with a disease, a half-filled circle represents a carrier female, and a half-filled square represents a carrier male.
3) Based on the Punnett square described, with the female parent being Yy and the male parent being YY, the expected percentage of offspring with green seeds (yy) is 0%. This is because the male parent can only contribute the Y allele, and the female parent can contribute either Y or y, but not both recessive alleles needed for green seeds in the same offspring.
4) Offspring 4, which is represented by a completely shaded square on the pedigree chart, describes a male having the disease. This is because a completely filled square represents an affected male, while a half-shaded square would represent a carrier male.
5) The statement that accurately describes a pedigree chart is: A pedigree chart tracks inherited traits from parents to offspring. Pedigree charts are used to analyze the pattern of inheritance within a family, but they do not predict genotypes or percentages of offspring with specific traits. They show the phenotype and carrier status of individuals based on observed traits over generations.
6) For the Punnett square with a tall pea plant (Tt) crossed with a short pea plant (tt), the correct match of the box numbers and the genotype of the offspring is:
- Box 1: Tt
- Box 2: Tt
- Box 3: tt
- Box 4: tt
This is because the tall plant can contribute either a T or a t allele, and the short plant can only contribute a t allele.
7) The true statement is: A pedigree chart tracks inherited traits, and a Punnett square is used to predict the genotype of offspring. A pedigree chart provides a visual representation of the inheritance of traits within a family, while a Punnett square is a tool used to predict the likelihood of an offspring inheriting particular genotypes from its parents.
What five things is the element carbon part of??
It is part of oceans, air, rocks, soil and all living things. Carbon doesn't stay in one place. It is always on the move! In the atmosphere, carbon is attached to oxygen in a gas called carbon dioxide.
Hope this helps.
How can you know if evolution has occured within species?
You can use the HWE (Hardy Weinberg Equilibrium) equations :
p + q = 1
p^2 + 2pq + q^2 = 1
If the allele combinations do not equal one after a while, evolution has occurred.
WHAT IS AN ALKANE
WHAT IS AN ALKENE
Final answer:
Alkanes are saturated hydrocarbons with only single bonds, following the formula CnH2n+2, whereas alkenes are unsaturated with at least one double bond and follow the formula CnH2n. The double bond in alkenes makes them more reactive than alkanes, and their naming involves the '-ene' suffix with the bond position indicated numerically.
Explanation:
Understanding Alkanes and Alkenes
Before discussing the complexities of alkenes, it's important to grasp what an alkane is. Alkanes are hydrocarbons, which mean they consist only of carbon and hydrogen atoms. They are saturated compounds that follow the general formula CnH2n+2 and are characterized by single bonds between carbon atoms. Common names for alkanes include paraffin hydrocarbons or acyclic saturated hydrocarbons. A key feature of alkanes is that they do not contain double bonds, triple bonds, or rings in their structure.
In contrast, alkenes are hydrocarbons that contain at least one carbon-carbon double bond, falling under the general molecular formula CnH2n. This double bond makes alkenes unsaturated hydrocarbons and more reactive than alkanes. Alkenes are also known as olefins, highlighting their capacity for reactions due to the presence of the double bond. When naming alkenes, the '-ane' ending of the parent hydrocarbon chain is replaced with '-ene', and the position of the double bond is indicated with a number in front of the name.
Final answer:
An alkane is a compound of carbon and hydrogen without double bonds or rings. Alkenes are hydrocarbons containing carbon-carbon double bonds.
Explanation:
An alkane is a compound of carbon and hydrogen only, without double bonds, triple bonds, or rings. They all conform to the general formula CnH₂ and are sometimes called paraffin hydrocarbons or acyclic hydrocarbons.
Alkenes are a family of hydrocarbons containing a carbon-carbon double bond. They are unsaturated compounds and have the general formula CnH₂n. Alkenes are more reactive than alkanes due to their double bond.
A solution of 20.0 g of which hydrated salt dissolved in
200 g H2O will have the lowest freezing point?
(A) CuSO4 • 5 H2O (M = 250)
(B) NiSO4 • 6 H2O (M = 263)
(C) MgSO4 • 7 H2O (M = 246)
(D) Na2SO4 • 10 H2O (M = 286)
Thank you so much for your help and explanation :)
Answer:
(D) Na₂SO₄•10H₂O (M = 286).
Explanation:
The depression in freezing point of water by adding a solute is determined using the relation:ΔTf = i.Kf.m,
Where, ΔTf is the depression in freezing point of water.
i is van't Hoff factor.
Kf is the molal depression constant.
m is the molality of the solute.
Since, Kf and m is constant for all the mentioned salts. So, the depression in freezing point depends strongly on the van't Hoff factor (i).van't Hoff factor is the ratio between the actual concentration of particles produced when the substance is dissolved and the concentration of a substance as calculated from its mass.(A) CuSO₄•5H₂O:
CuSO₄ is dissociated to Cu⁺² and SO₄²⁻.
So, i = dissociated ions/no. of particles = 2/1 = 2.
B) NiSO₄•6H₂O:
NiSO₄ is dissociated to Ni⁺² and SO₄²⁻.
So, i = dissociated ions/no. of particles = 2/1 = 2.
(C) MgSO₄•7H₂O:
MgSO₄ is dissociated to Mg⁺² and SO₄²⁻.
So, i = dissociated ions/no. of particles = 2/1 = 2.
(D) Na₂SO₄•10H₂O:
Na₂SO₄ is dissociated to 2 Na⁺ and SO₄²⁻.
So, i = dissociated ions/no. of particles = 3/1 = 3.
∴ The salt with the high (i) value is Na₂SO₄•10H₂O.
So, the highest ΔTf resulted by adding Na₂SO₄•10H₂O salt.
If it takes 50.0 mL of 0.5 M Ca(OH)2 solution to completely neutralize 125 mL of HNO solution, what is the concentration of the HNO3 solution?
the balanced equation for the reaction is
Ca(OH)₂ + 2HNO₃ ---> Ca(NO₃)₂ + 2H₂O
Molar ratio of Ca(OH)₂ to HNO₃ is 1:2
Number of moles of Ca(OH)₂ reacted - 0.5 moldm⁻³ x 50.0 x 10⁻³ dm³
number of Ca(OH)₂ moles - 0.025 mol
according to the molar ratio
1 mol of Ca(OH)₂ reacts with 2 mol of HNO₃
therefore 0.025 mol of Ca(OH)₂ reacts with - 2 x 0.025 = 0.05 mol of HNO₃
there are 0.05 mol of HNO₃ in 125 mL
and concentration = number of moles / volume in 1 dm³
concentration = 0.05 mol / 125 x 10⁻³ dm
concentration of HNO₃ = 0.4 mol/dm³
The concentration of HON3 can be determined by understanding the molar relationship between Ca(OH)2 and HNO3. In this scenario the concentration of HNO3 is found to be 0.4 M.
Explanation:The subject of this question is chemistry, specifically the topic of titration in acid-base reactions. To find the concentration of HNO3, we need to understand the molar relationship between Ca(OH)2 and HNO3. Each molecule of Ca(OH)2 can neutralize two molecules of HNO3 because it provides two OH- ions.
The moles of Ca(OH)2 used can be calculated as:
Moles = Molar concentration * volume.
So, 0.5 M * 50.0 mL/1000 = 0.025 mol. Since each mole of Ca(OH)2 neutralizes two moles of HNO3 0.025 mol of Ca(OH)2 will neutralize 0.05 mol of HNO3.
Now, we can find the concentration of HNO3 by dividing the moles of HNO3 by its volume:
Concentration = Moles/volume.
Therefore HNO3 concentration = 0.05 mol / (125 mL/1000) = 0.4 M.
https://brainly.com/question/33950928
#SPJ3
The equation shown represents cellular respiration. Glucose + X → Y + Water + Energy What do X and Y most likely represent?
x=oxygen y=carbon dioxide
On the present Periodic table of the elements, the elements are arranged according to increasing what?
Elements on the Periodic Table are organized according to an increasing atomic number. Each element's box contains its atomic number, symbol, and average atomic mass. They're arranged in rows and columns to reflect shared properties.
Explanation:On the current Periodic Table of elements, elements are aligned according to an increasing attribute known as the atomic number. The atomic number signifies the number of protons in the nucleus of an atom. Each box in the table represents an element and consists of the atomic number, symbol, average atomic mass, and sometimes the name of the element. The elements on the table are arranged in seven horizontal rows, referred to as periods or series, and 18 vertical columns, often labeled as groups. Groups from 1 to 18 are assembled based on shared properties, which allows scientists to anticipate behaviors of elements.
https://brainly.com/question/31672126
#SPJ12
The Periodic table of the elements is arranged according to increasing atomic number. This system organizes the elements into groups of similar properties, making the table a vital tool for predicting the characteristics of individual elements.
Explanation:The Periodic table of the elements is a tool where the elements are arranged according to an increasing order of their atomic numbers which corresponds with the number of protons in each nucleus. Atomic number plays a major role in the table's structure, organizing the elements into seven horizontal rows or periods, and 18 vertical columns or groups. Atoms with similar properties are grouped together in the same vertical column. This arrangement allows for the prediction of an element's properties based on its location within the table.
Learn more about Periodic table here:https://brainly.com/question/31672126
#SPJ12
Which of the following leads to a higher rate of diffusion?
Cooled gas
Higher molar mass of particles
Higher velocity of particles
Reduced temperature
Higher velocity of particles
Explanation;The diffusion rate is determined by a variety of factors which includes;
Temperature such that the higher the temperature, the more kinetic energy the particles will have, so they will move and mix more quickly and the diffusion rate will be high.Concentration gradient such that the greater the difference in concentration, the quicker the rate of diffusion.Higher velocity of particles increases the diffusion rate as this means more kinetic energy by the particles and hence the particles will mix and move faster, thus higher diffusion rate.The correct answer is c. Higher velocity of particles leads to a higher rate of diffusion.
Diffusion is the process by which particles spread out from an area of high concentration to an area of lower concentration. The rate of diffusion is influenced by several factors, including the temperature, the molar mass of the particles, and the velocity of the particles.
1. Temperature: Increased temperature results in higher kinetic energy of the particles, which increases their velocity. Therefore, higher temperatures lead to a higher rate of diffusion. Conversely, cooled gas (reduced temperature) would have a lower rate of diffusion.
2. Molar Mass: Heavier particles (higher molar mass) move more slowly than lighter particles because they have more mass to move. Therefore, gases with a lower molar mass diffuse more quickly than those with a higher molar mass.
3. Velocity of Particles: The rate of diffusion is directly proportional to the average velocity of the particles. Faster-moving particles will spread out more quickly, leading to a higher rate of diffusion
In summary, higher velocity of particles is the factor that leads to a higher rate of diffusion. This is because faster-moving particles cover more distance in a given time, leading to a quicker spread of particles from high to low concentration areas.
One way in which light waves are different from sound waves is that light waves A. can move easily through empty space B.are caused by rapid vibrations C.travel more slowly D.can be reflected
Will mark brainliest
One way in which light waves are different from sound waves is that light waves
A. can move easily through empty space
B.are caused by rapid vibrations
C.travel more slowly
D.can be reflected
D.can be reflected
is the answer
Which of the following would have the highest vapor pressure?
A.
1.0 M solution of ionic compound sodium chloride (NaCl)
B.
1.0 M solution of ionic compound potassium chloride (KCl)
C.
1.0 M solution of molecular compound sucrose (C12H22O11)
D.
pure water
In the vapour pressure of solution when the solute is mixed in water it will less than the actual solvent so the correct answer is pure water as it is universal solvent therefore water can disolve so many sustances in it
Read more on Brainly.com - https://brainly.com/question/1601417#readmore
Answer : The correct options is, (D) Pure water.
Explanation :
According to the relative lowering of vapor pressure, the vapor pressure of a component at a given temperature is equal to the mole fraction of that component of the solution multiplied by the vapor pressure of that component in the pure state.
Formula used :
[tex]\frac{\Delta p}{p^o}=i\times X_B[/tex]
where,
[tex]p^o[/tex] = vapor pressure of the pure component (water)
[tex]p_s[/tex] = vapor pressure of the solution
[tex]X_B[/tex] = mole fraction of solute
i = Van't Hoff factor
(A) The dissociation of 0.1 M [tex]NaCl[/tex] will be,
[tex]NaCl\rightarrow Na^++Cl^-[/tex]
So, Van't Hoff factor = Number of solute particles = [tex]Na^++Cl^-[/tex] = 1 + 1 = 2
(B) The dissociation of 0.1 M [tex]KCl[/tex] will be,
[tex]KCl\rightarrow K^++Cl^-[/tex]
So, Van't Hoff factor = Number of solute particles = [tex]K^++Cl^-[/tex] = 1 + 1 = 2
(C) [tex]C_{12}H_{22}O_{11}[/tex], sucrose is a non-electrolyte solute that means they retain their molecularity, and not undergo association or dissociation.
So, Van't Hoff factor = 1
(D) Pure water : As we know that the vapor pressure of a pure solvent is always greater than the vapor pressure of a solution that containing a non-volatile liquid.
As we know that the vapor pressure is depend on the Van't Hoff factor but the vapor pressure of a pure solvent is always greater.
Hence, from this we conclude that, the pure water have the highest vapor pressure.
A combustion analysis of a 0.503 g sample of an unknown hydrocarbon yields 1.53 g CO 2 2 and 0.756 g H 2 2 O. What is the empirical formula of the sample? Give your answer in the form C#H# where the number following the element’s symbol corresponds to the subscript in the formula. (Don’t include a 1 subscript explicitly). For example, the formula CH 2 2 O would be entered as CH2O
Answer:
C₅H₁₂.
Explanation:
The hydrocarbon is burned in excess of oxygen to give CO₂ and H₂O.The no. of moles of CO₂ produced = mass/molar mass = 1.53 g/44.0 g/mol = 0.03477 mol.Which is corresponding to 0.03477 mol of C.
The no. of moles of H₂O produced = mass/molar mass = 0.756 g/18.0 g/mol = 0.042 mol.
which corresponds to (0.042 x 2) = 0.084 moles of hydrogen.
The ratio of the number of moles of hydrogen to carbon in the composition of the compound will be 0.084 / 0.03477 = 2.4 = 12/5.
Therefore, the empirical formula of the compound under consideration is C₅H₁₂.
What does LeChateliers principle mean? Plz hurry.
Answer:
its an observation about chemical equilibrium of reactions . it states that changes in the temperature, pressure, volume, or concentration of a system will result in predictable and opposing changes in the system in order to achieve a new equilibrium state.
Explanation:
LeChatelier's Principle is an "equilibrium subjected to a stress tends to adjust itself so as to relieve the stress."
Which unit is not a measurement of volume?
cm
L
ml
cm3
Which unit is not a measurement of volume?
cm
L
ml
cm³
Cm is a measurement for length
Since cm is the unit for the measurement of length, it has not been used to measure volume. L, ml, and cm3 are the units for the measurement of volume.
Volume can be described as the space occupied by the liquid. The liquid has no specific shape however they can attain the shape of the container in which they are kept.
The unit has been used to describe or measure a specific parameter. Units can be interconverted from one to another and help in the equivalent value in another unit.
The unit for the length, volume, weight are all assigned by the standard methods.
The centimeter is the unit of length and has been used for the measurement of matter in terms of length. It can give the length of a piece of land, cloth, etc.
liter, milliliter, and centimeter cube have been the value that has been used for the measurement of the volume.
Since cm is the unit for the measurement of length, it has not been used to measure volume. L, ml, and cm3 are the units for the measurement of volume.
For more information about the measurement unit, refer to the link:
https://brainly.com/question/14026238
To what volume must 480.0 mL of 3.50 M Cu(NO3)2 be diluted to produce 2.10 M Cu(NO3)2?
Answer:
800 mL
Explanation:
This is a dilution question so we have to use the dilution formula
c1v1 = c2v2
Where c1 is the concentration and v1 is the volume of the concentrated solution
And c2 is concentration and v2 is volume of the diluted solution to be prepared
Substituting the values in the equation
3.50 M x 480.0 mL = 2.10 M x v2
v2 = 800 mL
A volume of 480.0 mL of 3.50 M solution should be diluted upto a volume of 800 mL to make a diluted copper nitrate solution of concentration 2.10 M