Answer:were is the passage
Explanation:
We’re the pasagee
4) Determine the Celsius temperature of 2.49 mol of gas contained in a 2.00-L vessel at a
pressure of 143 kPa.
Answer:
The temperature of the gas contained in the container is -259.35° C
Explanation:
To find the unit of degrees in Celsius (° C) in this case, the ideal gas law equation is used.
PV = nRT
Where P is the pressure, V is the volume, T is the temperature, n is the number of moles, and R is the universal gas constant.
P = 143kPa = 1.4113 atm V = 2.00L n = 2.49 mol R = 0.08205746 atm * L / mol * KSolving for T would be: PV / nR
T = ( 1.4113 atm * 2.00 L ) / ( 2.49 mol * 0.08205746 atm * L / mol * K )
T = 2.8226 / 0.2043
T = 13.8K = -259.35 ° C
Answer:
The Celsius temperature of the gas is -259.34 ° C
Explanation:
To answer the question, we note that the universal gas equation can be expressed as follows;
P·V = n·R·T
Therefore;
[tex]T = \frac{P \cdot V}{R \cdot n}[/tex]
Where:
n = Number of moles = 2.49 mol
P = Pressure = 143 kPa = 143000 Pa
V = Volume = 2.00 L = 0.002 m³
T = Temperature in Kelvin, K = Required
R = Universal Gas Constant = 8.3145 J/(mol·K)
Plugging in the values, we have;
[tex]T = \frac{143000 \times 0.002 }{8.3145 \times 2.49 } = 13.81 \, K[/tex]
Hence the temperature of the gas = 13.81 K
Converting the Kelvin temperature to Celsius temperature, we have
Celsius temperature = Kelvin temperature - 273.15
Therefore, 13.81 K to Celsius temperature gives;
13.81 - 273.15 = -259.34 ° C.
A mixture of oxygen, hydrogen and eater vapor has a total pressure of 684 mm Hg. The partial pressure of oxygen is 380 mm Hg and that of hydrogen is 0.100 atm. That is the partial pressure of the water vapor?
Answer:
684 mmHg
Explanation:
A mixture of oxygen, hydrogen and water vapor has a total pressure of 684 mm Hg, then the partial pressure of water vapor is 228 mmHg.
What is Dalton's Law?Dalton's law of gases states that total pressure of the mixture of gases is equal to the sum of the partial pressure of each gases present there, i.e.
P = p₁ + p₂ + p₃, where
P = total pressure of gas = 684 mmHg
p₁ = partial pressure of oxygen = 380 mmHg
p₂ = partial pressure of hydrogen = 0.100 atm = 76 mmHg
p₃ = partial pressure of water vapor = ?
On putting values, we get
p₃ = 684 - (380 + 76)
p₃ = 228 mmHg
Hence required partial pressure of water vapor is 228 mmHg.
To know more about dalton's law, visit the below link:
https://brainly.com/question/14119417
For the graph shown right, a good title for the x-
axis is
Agood title for
the
y axis is
Answer:
1) Time (Half-Life Cycles)
2) Radioactive Adams
Explanation:
on edg
Answer:
1) Time (Half-Life Cycles)
2) Radioactive Adams
3) quite strongly
4) Radioactive decay is a random event
Explanation: edge2023
Hydrogen peroxide, Hoz, is common in many households and is used as a bleaching agent. It usually comes in a dark, opaque bottle. When exposed to heat or light, hydrogen peroxide will decompose according to the reaction:
2H2O2--->2H2O+O2
Iron Nitrate has been shown to be an effective catalyst to accelerate the decomposition process and sodium phosphate can inhibit the effects of this catalytic effect.
Naturally, the consumer does not want their hydrogen peroxide to decompose Consider the factors affecting reaction rate that you learned about in this lesson. What should the consumer should do to prevent the decomposition of hydrogen peroxide? For example, should the hydrogen peroxide be stored in a warm or cool location? Use scientific reasoning to support your response
Answer:
1) hydrogen peroxide should be stored in dark bottles away from light
2) hydrogen peroxide should be stored in a cool place.
3) Drops of sodium phosphate may be added to inhibit its catalytic decomposition
Explanation:
Hydrogen peroxide is known to dissociate according to the equation;
2H2O2--->2H2O+O2.
This decomposition is facilitated by the following factors;
1) heat
2) light
3) presence of trace amounts of a catalyst
This implies that, if the user stores the hydrogen peroxide in a dark bottle, away from sunlight. It decreases its chances of decomposition.
Similarly, if the hydrogen peroxide bottle is stored in a cool environment, it is not decomposed by heat.
Lastly, drops of an inhibitor such as sodium phosphate may be added to inhibit the effect of any catalyst that may have mistakenly contaminated the hydrogen peroxide sample.
what type of energy for a spring is compressed
Answer:
potential energy is answer
Explanation:
HELP FAST PLEASE!!!!!Number the steps from when a stimulus is received to when the body reacts. The stimulus is received by sensory receptors. Motor neurons cause muscles to contract so the body can react to the stimulus. The brain processes the information through interneurons. Interneurons transfer response information to motor neurons. Sensory neurons carry stimulus information to the brain or spinal cord.
Answer:
hmm lets see The following is the sequence of the steps from when the stimulus is received to the reaction of the body: 1. The stimulus is received by the sensory receptors. 2. Sensory neurons carry stimulus information to the brain or spinal cord. 3. The brain processes the information through interneurons.
Explanation:
Answer:
Hey wilson Its Elijah Headley Im finished with half my classes now and finna finish 3 instead o 2
Explanation:
. Show all of your work. A radioactive cloud may contain Iodine-131, which has a half-life of 8 days. If the waste must decay to a concentration of less than 0.1% to be considered safe, it will take approximately ______ days to reach safe levels.
Answer:
4 days
Explanation:
A radioactive cloud is said Ron contain Iodine-131. It has a half-life of 8 days. If the waste must decay to a concentration of less than 0.1% to be considered safe, then it will take approximately 4 days days to reach safe levels under normal circumstances.
Answer:
100/2 ➙ 50/2 ➙ 25/2 ➙ 12.5/2 ➙ 6.25/2 ➙ 3.13/2 ➙ 1.56/2 ➙ 0.78/2 ➙ 0.39/2 ➙ 0.195/2 ➙ 0.0975
10 half lives x 8 days/half live = 80 days
describe a discovery or experiment that might have made it easier for people to believe in atoms
The presence of atom or molecules was proven already by scientific experiments by Rutherford, Dalton etc. There is no simple experiment by which we can prove that a substance is made of atoms. But we can observe it using Brownian motion.
What is atomic theories?There are various theories proposed by scientists regarding the structure and properties of atoms and they discovered the presence of sub-atomic particles electrons, protons and neutrons.
The presence of charged particles inside an atom is discovered by Rutherford using Gold-foil experiment. Similarly J.J Thomson discovered the electrons first.
Brownian motion is the random motion of particles which are suspended in a medium of liquid or gas. This motion is a proof of molecular vibration and thereby the presence of atoms or molecules.
By the immersing particle of inorganic matter in water we can observe the Brownian motion easily provided no external force is affected.
Therefore, in fact by these simple observations we can have a believe in atoms.
To find more related to Brownian motion, refer the link below:
https://brainly.com/question/935878
#SPJ2
Where would sound travel the slowest?
Question 3 options:
At the equator
At the North Pole
In New York City
In the pine forests of Georgia
Answer: In New York City
Explanation: I'm not a nerd but I think it would be that because when your in the middle of new York city, and you scream it echos.
Answer:
I believe it’s 4
Explanation:
PLEASE HELP
What type of patterns can a tidal height graph show ?
Answer:
Diurnal, Semidiural and mixed
Choose the most alkaline substance in the group.
soda, pH=25
household vinegar, pH=3
distilled water, pH=70
milk of magnesia, pH =105
PLEASE HELP
Answer:
pH=105
Explanation:
The higher the pH, the more alkaline it is.
Answer:
milk of magnesia, pH = 10.5
Explanation:
just got it right one edge
Explain the change in mass that occurs when the following substances are separately heated in open crucibles
(a) Copper metal
(b) Copper (II) nitrate
Answer:
your answer is (a) Copper Metal
Explanation:
Copper exists as a chemical element with the symbol Cu and atomic number 29. It exists as a soft, malleable, and ductile metal with very increased thermal and electrical conductivity. A freshly revealed surface of pure copper contains a pinkish-orange color.
Copper(II) nitrate represents any component of the family of inorganic compounds with the formula Cu(NO₃)₂ₓ. The hydrates exist in blue solids. Anhydrous copper nitrate includes blue-green crystals and sublimes in a vacuum at 150-200 °C. Familiar hydrates exist the hemipentahydrate and trihydrate.
Mass exists the quantity of matter in a physical body. It exists even a measure of the body's inertia, the resistance to acceleration (difference of velocity) when a net force exists applied. An object's mass also defines the strength of its gravitational attraction to other bodies.
Mass increase-Copper metals incorporated with oxygen forming copper oxide.Mass reduction-Copper II Nitrate exists deteriorated by heat forming copper oxide, Nitrogen IV Oxide, and oxygen gases, the gases escape.To learn more about Copper refer to:
https://brainly.com/question/24856041
#SPJ2
When harmful bacteria invade a wound, the skin around the wound turns red. This is known as:
Answer:
Inflammation
Explanation:
Inflammation is the response to a cut. The blood vessels expand when you get cut to allow white blood cells to flock to the wound site. These attack any bacteria that got past the clot. If you mean excess bacteria, then that would be an infection.
The redness around a wound caused by harmful bacteria is due to inflammation, an immune response that involves blood vessel dilation, increased blood flow, and white blood cells combatting the infection.
Explanation:When harmful bacteria invade a wound, the skin around the wound turns red due to a process called inflammation. This biological response is the body's second line of defense against pathogens. Inflammation is triggered by the release of chemicals when skin or other tissues are damaged. These chemicals cause blood vessels to dilate, increasing blood flow and making the area red and warm.
The influx of blood also delivers white blood cells like neutrophils to the wound site, and these cells help to combat the bacterial invaders. A well-known agent in this process is histamine, which not only contributes to the dilation of blood vessels but also helps attract immune cells to the site of injury. This inflammatory response helps to establish a physical barrier against the spread of infection and begins the process of tissue repair.
What is the molarity of a solution when 3.58 moles of NaCl are dissolved in 2.12 L of solution?
Answer:
1.68867925
Explanation: molarity = moles of solute divided by liters of solution so 3.58/2.12 equals 1.68867925
Each of the following statements is about voting trends in recent US elections. Which of the statements is FALSE?
A.
Male citizens are more likely to vote than female citizens.
B.
White citizens are more likely to vote than citizens of other races.
C.
Older citizens are more likely to vote than younger citizens.
D.
Wealthy citizens are more likely to vote than poor citizens
Answer:
I believe it is B
Explanation:
Taken from the California race voting %
What determines an object's potential energy?
Answer:
potential energy of an object depend on three factors. If an object has less mass,it will travel more distance, and Higher the mass of an object Distance tra
Explanation:
How many grams of H₂ are produced with the reaction of 36 grams of water?
2 Na + 2 H20 -> 2 NaOH + h2
Answer:
2g
Explanation:
The balanced equation for the reaction is given below:
2Na + 2H2O —> 2NaOH + H2
Next, we'll determine the mass of the water (H2O) that reacted and the mass of H2 produced from the balanced equation.
This is illustrated below:
Molar Mass of H2O = (2x1) + 16 = 18g/mol
Mass of H2O from the balanced equation = 2 x 18 = 36g
Molar Mass of H2 = 2x1 = 2g/mol
Therefore, from the balanced equation above, 36g of H2O reacted to produce 2g of H2.
From the illustration above, we can see that 36g of water will produce 2g of H2.
When pentane (C5H12) mixes with heptane (C7H16), what type of intermolecular forces must be broken? What type of attractive forces are formed?
A) Dipole-dipole; dispersion
B) Dipole-dipole; Dipole-dipole
C) Dispersion; Dipole-dipole
D) Dispersion; dispersion
Answer:
D) Dispersion; dispersion
Explanation:
Pentane or heptane are non-polar molecules so both of the , dispersion or london force exists as intermolecular force exists among molecules of pentane or heptane . So these bonds needs to be broken and dispersion interaction takes place between molecules of pentane and heptane. Dispersion interaction of AB type is stronger than AA or BB type.
Mixing of nonpolar molecules pentane and heptane results in the breaking and forming of dispersion forces, which are intermolecular forces present in such hydrocarbons.
Explanation:When pentane (C5H12) and heptane (C7H16) mix, the type of intermolecular forces that must be broken are dispersion forces. Both pentane and heptane are nonpolar molecules hence the only intermolecular forces present are the weak dispersion forces or London dispersion forces. These are the instantaneous dipole-induced dipole forces that result from transient shifts in electron density. The somewhat stronger intermolecular force among nonpolar hydrocarbons is basically due to larger electrong cloud, and the only type of 'attractive forces' available for them to form when they mix are still the same - dispersion forces
Learn more about Intermolecular Forces here:https://brainly.com/question/34620632
#SPJ6
How to convert particles to mass
Answer:
Use stoichiometry to find your answers
Explanation:
need help QUICK...
Which of the following is a compound?
lithium
carbon dioxide
potassium
nitrogen
Answer:
nitrogen
Explanation:
Explain why iodine is brittle in its solid state
Final answer:
Solid iodine is brittle due to weak dispersion forces between iodine molecules in its molecular lattice structure, which when stressed can cause layers to shift and fracture.
Explanation:
Iodine is brittle in its solid state because of its molecular lattice structure, where individual iodine molecules are held together by relatively weak dispersion forces. Despite being the strongest within the halogen group, these forces are not strong enough to allow for flexibility, so when iodine crystals are subjected to mechanical stress, layers of molecules can shift, leading to fracture and resulting in the brittleness observed. Iodine's electron configuration, with -empty valanced orbitals, allows for these molecular interactions to occur in its solid state.
Which atoms combine together during fusion reaction on the sun?
Answer:
Hydrogen
Explanation:
Four hydrogen atoms combine together during fusion reaction on the sun. In the core of the Sun hydrogen is being converted into helium.
What is fusion ?Fusion is the process by which the sun and stars are powered. It is the reaction in which two hydrogen atoms combine or fuse to form a helium atom. Some of the hydrogen's mass is converted into energy during the process.
The Sun and other stars are powered by nuclear fusion reactions. A fusion reaction occurs when two light nuclei combine to form a single heavier nucleus.
When two atoms collide, they fuse to form a heavier atom, such as when two hydrogen atoms fuse to form one helium atom. This is the same process that powers the sun and generates enormous amounts of energy many times more than fission.
Thus, Four hydrogen atoms combine together during fusion reaction on the sun.
To learn more about the fusion, follow the link;
https://brainly.com/question/12701636
#SPJ65
If 16.00 g of O₂ reacts with 80.00 g NO, how many grams of the excess reactant is used in the chemical reaction? (enter only the value, round to whole number)
Answer:
50.00 g of NO
Explanation:
Remember that the balanced chemical reaction equation is indispensable in solving any question that has to do with stoichiometry. Hence the first step in solving the problem is noting down the balanced chemical reaction equation.
2NO(g) + O2 (g)→ 2NO2(g)
Now we try to find out the reactant in excess. The reactant in excess gives the greater mass of product.
For O2;
From the balanced reaction equation;
32 g of O2 yields 92g of NO2
16.00g of O2 will yield 16.00×92/32 = 46g of NO2
For NO;
30g of NO yields 92g of NO2
80.00 g of NO yields 80.00 × 92/30 = 245.33 g of NO2
Hence NO is the reactant in excess.
If 1 mole of O2 reacts with 2 moles of NO2 according to the balanced reaction equation
Then 32 g of O2 reacts with 60g of NO according to the balanced reaction equation
16.00 g of O2 reacts with 16.00 × 60 /32 = 30 g of NO
Hence mass of excess reactant used in the reaction = total mass of NO- mass of NO reacted= 80.00g -30.00g = 50.00 g of NO
Hence the mass of excess reactant used in the reaction is 50.00 g of NO
Answer:
The amount in grams of the excess reactant (NO) used in the chemical reaction is 30 grams
Explanation:
The balanced chemical equation for the reaction is presented as follows;
O₂ (g) + 2NO (g) → 2NO₂ (g)
Therefore, one mole of O₂ combines with two moles of NO to produce two moles NO₂
Molar mass of oxygen gas, O₂ = 31.999 g/mol
Mass of oxygen gas, O₂, present = 16.00 g
Molar mass of nitric oxide, NO = 30.01 g/mol
Mass of nitric oxide, NO, present = 80.008
Number of moles, n, of a sample of a substance is given by the following relation;
[tex]n = \frac{Mass \ m, \, of \, sample}{Molar \, mass \, of \, sample}[/tex]
Number of moles of O₂ present is presented as follows;
[tex]n_{O_2}=\frac{16 \, g}{31.999 \, g} = 0.5 \, moles[/tex]
Number of moles of NO present is presented as follows;
[tex]n_{NO}=\frac{80 \, g}{30.01 \, g} = 2.67 \, moles[/tex]
Hence, since one mole of O₂ combines with two moles of NO to produce two moles NO₂, 0.5 moles of O₂ will combine with one mole of NO to produce one mole NO₂. Therefore, the oxygen is used up in the reaction and the nitric oxide is the excess reactant.
Number of moles of nitric oxide, NO, consumed in the reaction = 1 mole
Mass, m of nitric oxide used = number of moles of nitric oxide × molar mass of nitric oxide
∴ Mass of nitric oxide used = 1 mole × 30.01 g/mol = 30.01 grams
Rounding to the nearest whole number, we have;
Mass of nitric oxide used = 30 grams.
The amount in grams of the excess reactant (NO) used in the chemical reaction = 30 grams.
According to the equation, 2 H2 + O2 --> 2 H20, how many moles of oxygen are required to convert 12 moles of hydrogen to water?
Answer:
6 moles of oxygen, or 3O2.
Explanation:
I would build a proportion for this:
[tex] \frac{2(2)}{2} = \frac{12}{x} \\ 4x = 24 \\ x = 6[/tex]
if element x forms the oxides xo and x2o3 the oxidation numbers of element x are
a)+1 and +2
b)+2 and +3
c)+1 and +3
d)+2 and +4
Answer:
b) +2 and +3.
Explanation:
Hello,
In this case, given the molecular formulas:
[tex]XO[/tex]
And:
[tex]X_2O_3[/tex]
We can relate the subscripts with the oxidation states by knowing that they are crossed when the compound is formed, for that reason, we notice that oxygen oxidation state should be -2 for both cases and the oxidation state of X in the first formula must be +2 since both X and O has one as their subscript as they were simplified:
[tex]X^{+2}O^{-2}[/tex]
Moreover, for the second case the oxidation state of X should be +3 in order to obtain 3 as the subscript of oxygen:
[tex]X_2^{+3}O_3^{-2}[/tex]
Thus, answer is b)+2 and +3
Best regards.
In the case when the element x forms the oxides xo and x2o3 the oxidation numbers of element x are option b +2 and +3.
Calculation of the number of elements:
The equation should be X2O3.
Here we can link the subscripts with the oxidation states by knowing that they should not be linked at the time when the compound should be formed. So here the oxygen oxidation state should be -2 and the oxidation state of x should be +2.
Its like
X+2O-2
Here in the second case, the oxidation state of x should be +3 for obtaining 3 and treated as the subscript of oxygen.
Learn more about element here: https://brainly.com/question/4852150
How many moles are there in 2.35 grams of H2O?
Answer:
the answer is 0.13 moles
Final answer:
To find the number of moles in 2.35 grams of H2O, divide the mass by the molar mass of H2O (18.015 g/mol) to get approximately 0.130 moles.
Explanation:
To calculate the number of moles in 2.35 grams of H2O, you need to use the molar mass of water as the conversion factor. The molar mass of water (H2O) is calculated by summing the molar masses of 2 hydrogen atoms (2 x 1.0079 g/mol) and 1 oxygen atom (15.999 g/mol), which equals 18.015 g/mol.
To find the moles of water in 2.35 grams, use the following conversion:
Divide the mass of the H2O by the molar mass:
2.35 g H2O / 18.015 g/mol = 0.130 moles of H2O
Maria needs to dilute her stock of 15.0 M HNO3 solution for a lab. She wants to get 525 mL of 1.00 M HNO3. How many mL of 15.0 HNO3 must she prepare?
Answer:
35
Explanation:
I got it wrong and it gave me the right answer.
The concentration terms are molality, normality and mole fraction. Molarity can be used to find out the ionic strength of any solution. Therefore, 35ml of 15.0 HNO3 must she prepare.
What is molarity?Molarity can be calculated by dividing number of moles of solute by volume of solution in litre. Molarity is affected by temperature. Its unit is mole/liter. It measure the concentration of any solute in a solution.
Mathematically,
According to the dilution law,
M₁V₁=M₂V₂
where, symbols have following meaning
M₁ = molarity of stock solution = 15.0 M
V₁ = volume of stock solution =?
M₂ = molarity of dilute solution =1.00M
V₂ = volume of dilute solution = 525 mL
substituting all the given values we get
M₁V₁=M₂V₂
15.0×V₁=1.00×525
V₁=35ml
Therefore, 35ml of 15.0 HNO3 must she prepare.
Learn more about Molarity, here:
https://brainly.com/question/16727614
#SPJ2
How many Liters of oxygen at STP will react with 8.7 grams of ethene? * IF
(1 Point)
1 C2H4+3 02 → 2 CO2 + 2 H20
Answer Choices:
A. 20.88 L
B. 2.32
C. 224
D. 6.54 L
Answer:
Explanation:
20.88L
This is urgent! Please answer with the correct answer and fast! I made a thermometer which measures temperature by the compressing and expanding of gas in a piston. I have found that, at 1000 C, the volume of the piston is 20 L. What is the temperature (in either K or C) outside if the piston has a volume of 15 L?
Answer:
Temperature (T1) = 954.86 K or 681.86 ° C
Explanation:
Given:
Temperature (T) = 1000° C = 1000 + 273.15 = 1,273.15 K
Volume of the piston (V) = 20 L
Volume of the piston (V1) = 15 L
Find:
Temperature (T1) = ?
Computation:
⇒ [Temperature (T) / Volume of the piston (V)] = [Temperature (T1) / Volume of the piston (V1) ]
⇒ [1,273.15 K / 20 L] = [Temperature (T1) / 15 L]
⇒ Temperature (T1) = 954.86 K or 681.86 ° C
Using Charles's Law, which relates gas volume and temperature, it is determined that when a gas-filled piston with an initial volume of 20 L at 1000°C compresses to 15 L, the outside temperature is approximately 204.28°C.
Explanation:To determine the temperature outside when the piston has a volume of 15 L, we need to use Charles's Law, which states that the volume of a gas is directly proportional to its absolute temperature when the pressure is held constant. Mathematically, Charles's Law is expressed as V1/T1 = V2/T2, where V1 and T1 are the initial volume and temperature and V2 and T2 are the final volume and temperature. Given that at 1000°C (which is 1273.15 K), the volume of the piston is 20 L, we can find the outside temperature (T2) when the volume of the piston is 15 L by rearranging the formula to T2 = (V2×T1)/V1.
Let's calculate the outside temperature:
T2 = (15 L × 1273.15 K) / 20 L
T2 = 9548.625 K / 20
T2 = 477.43125 K
To convert this back to Celsius, we subtract 273.15 from the Kelvin temperature.
T2 (in °C) = 477.43125 K - 273.15
T2 (in °C) = 204.28°C
Therefore, the outside temperature is approximately 204.28°C when the piston has a volume of 15 L.
Which factors affect electronegativity?
A. Number of electrons and atomic radius
B. Number of unshielded electrons and density of the element
C. Atomic radius and number of unshielded protons
D. Density of the element and atomic radius
Answer:
I guess it would be C.
Explanation:
because it sounds familiar