Motion graph:
It is defied as "A considerable amount of information about the motion like velocity, acceleration". and the information obtained by the slope of graphs.The graphs distance, velocity and acceleration are the function of time, that defines the motion using the motion equations.
An object moving at a constant speed in a circle is _____.
A. accelerating
B. changing its speed
C. not changing its velocity
D. not changing its direction
Please help me idek if this is physics
Answer:
A. accelerating
Explanation:
Acceleration is defined as the ratio between the change in velocity and the time taken for the velocity to change:
[tex]a=\frac{\Delta v}{\Delta t}[/tex]
We must note that the velocity is a vector - so it has both a magnitude (the speed) and a direction.
This means that a non-zero acceleration occurs when:
- the speed changes, or
- the direction changes, or
- both the speed and the direction change
For an object moving at constant speed in a circle, the direction changes, so the object is accelerating.
1. Set frequency of wave generator to 5Hz.
2. Set amplitude of wave generator to 1cm.
3. Place the barriers 10cm from the wave generator.
4.
5. Sketch the diffraction pattern observed.
What should be step 4?
Separate the barriers so they have a 2cm gap between them.
Answer:
Separate the barriers so they have a 2cm gap between them.
Explanation:
Changing the spacing between the barriers will alter the diffraction pattern.
which obstacle to problem solving involves arriving at a solution based on your preconceptions and ignoring any evidence that goes
Answer:
confirmation bias
Explanation:
the tendency to interpret new evidence as confirmation of one's existing beliefs or theories in a way that affirms one's prior beliefs or hypotheses.
Final answer:
Cognitive bias involves arriving at solutions based on preconceptions and ignoring conflicting evidence.
Explanation:
Problem-Solving Obstacles: Cognitive Bias
The obstacle to problem solving that you're referring to is commonly known as cognitive bias. Cognitive bias is a mental error that occurs when individuals hold onto their preconceptions, even when presented with new information that challenges those beliefs. This bias makes it difficult for individuals to process information in an unbiased manner, leading to deficits in problem-solving and decision-making.
Confirmation bias is a specific type of cognitive bias that involves seeking or interpreting evidence in ways that are partial to existing beliefs, expectations, or a hypothesis in hand. It represents a tendency to favor information that confirms one's preconceptions or hypotheses regardless of whether the information is true.
As a result, people afflicted with confirmation bias may disregard or undervalue evidence that contradicts their existing views, leading to a form of intellectual blinders.
Another related concept is the need for closure, which describes an individual's desire for a firm answer to a question, leading them to seek conclusions that feel satisfying rather than necessarily accurate. Both confirmation bias and the need for closure can lead to biased problem-solving, where a person's desire to reach a particular conclusion can cause them to overlook or ignore relevant information that does not align with their existing beliefs.
How long does it take a 1.51 × 10^4 W steam engine to do 8.72 × 10^6 J of work? Round your answer to three significant figures. 1.02 × 10^1 s 5.77 × 10^2 s 7.21 × 10^5 s 1.32 × 10^11 s
Answer:
5.77 × 10^2 s
Explanation:
Power is defined as the amount of work done divided by the tima taken to do that work:
[tex]P=\frac{W}{t}[/tex]
where W is the work done and t the time taken.
In this problem, we have:
- the power: [tex]P=1.51 \cdot 10^4 W[/tex]
- the work done: [tex]W=8.72 \cdot 10^6 J[/tex]
So we can re-arrange the previous equation to find the time taken:
[tex]t=\frac{W}{P}=\frac{8.72 \cdot 10^6 J}{1.51 \cdot 10^4 W}=5.77\cdot 10^2 s[/tex]
Answer:
B) 5.77 × 10^2 s
Explanation:
What is the force of friction between the dragsters tires and the track if the dragster mass is 300kg and the coefficient of the friction force is 0.8
The force of friction between the dragster's tires and the track is 2352 newtons, calculated using the formula F=μN with the given mass of 300kg and the coefficient of friction 0.8.
Explanation:The force of friction between the dragster's tires and the track can be calculated using the formula F=μN, where F is the frictional force, μ is the coefficient of friction, and N is the normal force. In this case, the normal force is equal to the weight of the dragster, which is the mass (m) times the acceleration due to gravity (g), N = mg. Given that the mass (m) is 300kg and the coefficient of friction (μ) is 0.8, the force of friction can be calculated as:
F = μ × mg = 0.8 × 300kg × 9.8m/s² = 2352N
Therefore, the force of friction is 2352 newtons (N).
you pull down on a rope to raise a flag on a flag pole which describes why the rope and the flag pole act as a machine
A-they change the direction of the forces
B-they increase the distance over which the force acts
C- they decrease the distance over which the force acts
Answer: A-they change the direction of the forces
Explanation:
Any device which makes our work simpler is known as a machine. A machine may increase the amount of output force which is determined by its mechanical advantage or a machine changes the direction of the force.
In the given situation the input force acts in the downward direction to pull the rope. The output force acts on the flag being pulled upwards at the other end. Thus, the direction of the forces varies. Correct option is A.
Answer:
A-they change the direction of the forces
Explanation:
What regions contain the largest concentration of oil wells
Answer:
Middle East, North America, Russia and the Former Soviet Union, South America, Africa
Explanation:
1. Middle East: The Middle East is one of the most significant regions for oil production, with countries like Saudi Arabia, Iraq, Iran, Kuwait, and the United Arab Emirates being major oil producers.
2. North America: Within North America, the United States and Canada have large concentrations of oil wells, particularly in states like Texas, Oklahoma, Alaska, and provinces like Alberta.
3. Russia and the Former Soviet Union: Russia is a major oil-producing country, and during the time of the Soviet Union, several other countries in the region also contributed significantly to oil production.
4. South America: Countries like Venezuela and Brazil have significant oil reserves and production.
5. Africa: Countries like Nigeria, Angola, and Algeria have substantial oil production.
A dog weighs 260 Newtons. What is her mass?
260 Newtons equals 26.51 Kg, or 58.44 lbs.
Hope this helps!
Which of the following is considered a calm area close to the equator resulting in little to no wind?
Question 3 options:
trade winds
polar easterlies
doldrums
prevailing westerlies
These are also called zones of equatorial calm and it is due a climatic phenomenon that is placed near the Earth equator, attributed to the soft winds, that are called calm winds as well; accompanied by systems of abundant rains and heat.
In this area periods of great calm occur when the winds virtually disappear completely, trapping the sailing ships for long periods (days or weeks). This is why the term doldrum became popular as a colloquial expression in the eighteenth century, to refer to "the caprice of the wind that slows down the navigation to sail".
The zone is located in the place where two trade winds meet, this means the trade winds of the northern hemisphere converge with those of the southern hemisphere, that is why this region is related to the intertropical convergence zone.
what is the average speed of a cheetah that runs 88m in 5 seconds?
17.6 m/s hope this helps
The average speed of a cheetah that runs 88 meters in 5 seconds is 17.6 meters per second.
What is Average speed?The average speed can be defined as the total distance traveled by the object in a particular time interval. The average speed is a scalar quantity because it is represented by only the magnitude and does not have the direction. The SI unit for average speed is m/s or ms⁻¹.
The formula for determining average speed is:
Average speed = Distance covered by the object/ Total time taken
Average speed = 88m / 5sec
Average speed = 17.6 m/s
Therefore, the average speed of the cheetah is 17.6 meters per second.
Learn more about Average speed here:
https://brainly.com/question/12322912
#SPJ6
Conservation of energy
Answer:
It is the fundamental concept of physics.It states that total amount of energy in a system remains constant in isolated system. This means energy can neither be created nor it can be destroyed but can change from one form to another.Energy can change from kinetic to potential energy, and back without reducing the total energy.A police car is parked by the side of a highway and it’s siren emits a sound measuring 750Hz. As you approach the police car from a distance, you hear a change in the sound. The change in the sounds
Answer:
The frequency of the sound increases
Explanation:
This phenomenon is known as Doppler effect, and it occurs when the observer is moving relative to the source of the sound (as in this case, sine you are moving towards the police car).
When you are moving towards the source of the sound, the frequency of the siren appears to increase, according to the formula:
[tex]f'=\frac{v+v_o}{v}f[/tex]
where
f' is the apparent frequency of the sound
v is the speed of the sound wave
[tex]v_o[/tex] is the speed of the observer relative to the source, and it is positive if the observer is approaching the source, or negative if the observer is moving away
f is the real frequency of the sound (in this case, 750 Hz)
If a 100Ib women walks up a flight of stairs to get to the top of a 100 meter building. How much work did she perform?
Given that
force ( F) = 100 lb ,
displacement (S) = 100 m ,
Determine , Work = ?
Work = Force × displacement
W = 100 × 100
W = 100000 lb-m
The is a measurement unit for intensity of sound. a) meter b) decibel c) degree
Answer: decibel
It is the unit of sound abbreviated as dB. It is also defined as Power per square meter, Therefore intensity of sound expressed in Watt per square meter (W/m2).
Decibel (dB)is the unit of expressing the ratio between two physical quantities, usually amounts of acoustics or electric power or measuring the relative loudness of sounds.
If your using GradPoint or NovaNet,
your answer would be (B) decibel.
I hope this helped!
If you throw a ball to your friend, the ball ____________.
a. exerts two forces against your hand
b. exerts a force against your hand
c. exerts a force in the same direction as the force from your hand
d. exerts no forces
Answer:
B
Explanation:
An apple drops from a tree and hits the ground in 1.5s what is its speed just before it hits the ground?
Vf - Vo = gT
where
Vf = velocity of apple just before hitting the ground
Vo = initial velocity of apple = 0
T = time for apple to hit the ground = 1.5 sec (given)
g = acceleration due to gravity = 9.8 m/sec^2 (constant)
Substituting appropriate values,
Vf - 0 = 9.8(1.5)
Vf = 14.7 m/sec.
Just before it hits the ground, the apple's speed is approximately 14.715 meters per second.
To find the speed of the apple just before it hits the ground, we can use the equations of motion.
When an object falls freely under the influence of gravity, its speed increases due to acceleration.
The equation to calculate speed is:
Speed (v) = Initial Speed (u) + (Acceleration (a) × Time (t))
Assuming the apple falls from rest (initial speed, u, is 0), and the acceleration due to gravity on Earth is approximately 9.81 [tex]m/s^{2}[/tex], and the time it takes to hit the ground is 1.5 seconds, we can calculate:
v = 0 + (9.81 [tex]m/s^{2}[/tex] × 1.5 s) = 14.715 m/s
So, just before it hits the ground, the apple's speed is approximately 14.715 meters per second.
To know more about gravity, here
brainly.com/question/31321801
#SPJ3
A daring 510N swimmersdives off a cliff with a running horizontal lead.what must be her mimimum speed just as she leaves the top of cliff so that she will miss the ledge at the bottom which is 1.75 m wide and 9m below the top of cliff
looks like its projectiles = swimmer. see encls may help
Answer:
The running horizontal speed should be larger than 1.29 m/s.
Explanation:
In order for the swimmer to just miss the bone-breaking ledge, her horizontal speed must be
[tex]v > \frac{1.75m}{t_{fall}}[/tex]
in which we need to know how long we she be diving through the air. To determine that, recall the formula for the distance made by an object with acceleration (in this case it is the gravitational acceleration) with no initial (vertical) velocity:
[tex]s = \frac{1}{2}gt^2[/tex]
from which it follows that (for non-negative t)
[tex]t = \sqrt{\frac{2\cdot9m}{9.8\fram{m}{s^2}}}\approx1.36s[/tex]
This result can be used in the initial inequality:
[tex]v > \frac{1.75m}{t_{fall}}=\frac{1.75m}{1.36s}=1.29\frac{m}{s}[/tex]
The diving lady better gets a speed larger than 1.29 m/s to avoid landing on the ledge.
If V = 10V, what value of R would limit I to 10mA? (If you have 10 volts, what resistance would be needed to limit the current to 10 milliamps)
Answer:
[tex]1000 \Omega[/tex]
Explanation:
The relationship between voltage, resistance and current in a circuit is given by Ohm's law:
[tex]V=RI[/tex]
where
V is the voltage
R is the resistance
I is the current
In this problem, we have:
V = 10 V
R = ?
I = 10 mA = 0.010 A
Therefore, we can re-arrange the equation to find R:
[tex]R=\frac{V}{I}=\frac{10 V}{0.010 A}=1000\Omega[/tex]
The government has declared that a hurricane is likely to hit the East Coast. Which government division is part of ACF and provides guidance to citizens?
A.
Job Opportunities for Low-Income Individuals
B.
Office of Human Services Emergency Preparedness and Response
C.
Assets for Independence
D.
Low-Income Home Energy Assistance Program
The Answer is B) Office of Human Services Emergency Preparedness and Response
an 1150kg elevator moving down speeds up at a rate of 3.5m/s. what is the tension in the supporting cables?
Answer:
The tension force in the supporting cables is 7245N
Explanation:
There are two forces acting on the elevator: the force of gravity pointing down (+) with magnitude (elevator mass) x (gravitational acceleration), and the tension force of the cable pointing up (-) with an unknown magnitude F. The net force is the sum of these forces:
[tex]F_{net} = F_g - F = m\cdot g - F\\[/tex]
We are given the resulting acceleration along with the mass, i.e., we know the net force, allowing us to solve for F:
[tex]1150kg\cdot 3.5\frac{m}{s^2}= 1150kg \cdot 9.8\frac{m}{s^2}-F\\\implies F = 1150kg\cdot(9.8-3.5)\frac{m}{s^2}= 7245N[/tex]
The tension force F in the supporting cables is 7245N
What happens when two forces act in the same direction?
When two forces act in the same direction they add together. Equal forces acting in opposite directions are called balanced forces. Balanced acing on a object wont change the objects motion. When you add equal forces in opposite directions the net force is going to be zero.
A race car travel on a racetrack at 44m/s and slows down at a constant rate to a velocity of 22m/s over 11s. How far does it move during this time
Final answer:
The race car moves a distance of 363 meters during the given time period.
Explanation:
To calculate the distance the race car moves during the given time, we can use the formula:
distance = initial velocity * time + 0.5 * acceleration * time^2
Given that the initial velocity of the car is 44 m/s and it slows down to a velocity of 22 m/s over 11 s with a constant acceleration, we can substitute these values into the formula:
distance = 44 * 11 + 0.5 * acceleration * 11^2
To find the acceleration, we can use the formula:
acceleration = (final velocity - initial velocity) / time
Substituting the values, the acceleration is:
acceleration = (22 - 44) / 11 = -2 m/s^2
Now we can substitute the acceleration value into the distance formula:
distance = 44 * 11 + 0.5 * (-2) * 11^2
Simplifying the equation, we get:
distance = 484 - 121
distance = 363 meters
what advantage does white fur give the arctic fox in the winter?
It allows it to blend in with the environment and avoid predators.
Длина лодки=6 метров человек, масса которого в 2 раза меньше массы лодки переходит с носа на карму определить, на какое расстояние переместилась лодка, если сопротивление воды пренебречь?
mv'=(M+m)v
v'=d/t
v=x/t
m'=M/2
Md/2t=(M+M/2)x/t
Md/2=3Mx/2
d=3x=>x=d/3=6/3=2 m
The boat and the person moving in opposite directions is a result of the principle of conservation of momentum. The man's mass being half of the boat means the boat will compensate for his movement to conserve the total momentum, shifting in the opposite direction. However, the exact distance can't be determined without more details due to factors like water resistance.
Explanation:In this case, we're dealing with a Physics problem. The topic is principle of conservation of momentum, which refers to the total momentum of an isolated system remaining constant if no external forces act on it.
As the total momentum of the system (boat and person) remains constant, the boat and the person move in such a way that their total momentum is preserved. The man's mass being half of the boat indicates that when the man moves to one end, the boat will shift by a certain distance in the opposite direction to conserve momentum.
However, as the resistance of water is neglected, we cannot calculate the exact distance the boat moves without more data. In real life, there are many factors like water resistance and the distributed mass of the boat that need to be accounted.
Learn more about Conservation of Momentum here:https://brainly.com/question/32309314
#SPJ2
clothes dryer uses about 3:00 amps of current from a 240-volt line how much power does it use
Electrical power is defined as
P = I * V
I = 3 amperes
V = 240 volts
Power = 3 * 240
Power = 720 Watts. Answer
PLS HELP WILL GIVE 20 POINTS. I just need C.
What is the voltage in a circuit if the current is 6 Amps and resistance is 6 ohms
In physics, Ohm's law is used to calculate the voltage in a circuit. With the current of 6 Amps and the resistance of 6 ohms, the voltage would be 36 Volts.
Explanation:The subject matter of the question is related to a fundamental concept in Physics, called Ohm's law. Ohm's law states that the voltage (V) across a resistor is directly proportional to the current (I) through it, and the constant of proportionality is the resistance (R). It is represented by the formula V = I * R.
In your case, if the current (I) is 6 Amps and the resistance (R) is 6 ohms, using Ohm's law, the voltage (V) can be calculated as the product of current and resistance. Therefore, V = I* R = 6 Amps * 6 Ohms = 36 Volts.
So, the voltage in the circuit is 36 Volts.
Learn more about Ohm's law here:https://brainly.com/question/36009177
#SPJ3
A 100.-kilogram cart accelerates at 0.50 meter per second squared west as a horse exerts a force of 60. Newtons west on the cart. What is the magnitude of the force that the cart exerts on the horse?
Answer:
The magnitude of the force on the horse by the cart is 60 N.
Explanation:
Given that,
mass of cart = 100 kg
Acceleration of cart = 0.50 m/s²
Horse exerted force on a cart F= 60 N
The cart is moving by the force is defined as:
[tex]F' = ma[/tex]
[tex]F' = 100\times0.50[/tex]
[tex]F' = 50\ N[/tex]
The cart is moving by the 50 N force.
But according to newton's third law,
Newton's third law is action reaction law.
When we exerted the force on the object then the object exerted same force but opposite direction.
Therefore,
A horse exerted the force on the cart and the cart exerted equal but opposite force on horse.
F=-F''
F = -60 N
So, The magnitude of the force is 60 N
Hence, The magnitude of the force on the horse by the cart is 60 N.
Car A (1750 kg) is travelling due south and car B (1450 kg) is travelling due east. They reach the same intersection at the same time and collide. The cars lock together and move off at 35.8 km/h[E31.6 S]. What was the velocity of each car before they collided?
Consider the east-west direction along x-axis and north-south direction along y-axis. In unit vector notation, velocities can be given as
[tex]\underset{V_{A}}{\rightarrow}[/tex] = velocity of car A before collision = 0 i - [tex]V_{A}[/tex] j
[tex]\underset{V_{B}}{\rightarrow}[/tex] = velocity of car B before collision = [tex]V_{B}[/tex] i + 0 j
[tex]\underset{V_{AB}}{\rightarrow}[/tex] = velocity of combination after collision = (35.8 Cos31.6) i - (35.8 Sin31.6) j = 30.5 i - 18.8 j
[tex]M_{A}[/tex] = mass of car A = 1750 kg
[tex]M_{B}[/tex] = mass of car B = 1450 kg
Using conservation of momentum
[tex]M_{A}[/tex] [tex]\underset{V_{A}}{\rightarrow}[/tex] + [tex]M_{B}[/tex] [tex]\underset{V_{B}}{\rightarrow}[/tex] = ([tex]M_{A}[/tex] + [tex]M_{B}[/tex]) ( [tex]\underset{V_{AB}}{\rightarrow}[/tex] )
(1750) (0 i - [tex]V_{A}[/tex] j) + (1450) ([tex]V_{B}[/tex] i + 0 j) = (1750 + 1450) (30.5 i - 18.8 j)
(1450) [tex]V_{B}[/tex] i - (1750) [tex]V_{A}[/tex] j = 97600 i - 60160 j
Comparing the coefficient of "i" and "j" both side
(1450) [tex]V_{B}[/tex] = 97600 and - (1750) [tex]V_{A}[/tex] = - 60160
[tex]V_{B}[/tex] = 67.3 km/h and [tex]V_{A}[/tex] = 34.4 km/
Describe the transformation of mechanical energy in a ball when it is thrown straight up and then comes back down
The ball's mechanical energy transforms from kinetic to gravitational potential as it is thrown up and slows down, and from gravitational potential back to kinetic as it falls down, increasing in speed.
Explanation:When a ball is thrown straight up, it undergoes a series of energy transformations involving mechanical energy. Initially, the ball has kinetic energy as it moves upwards. As it rises, this kinetic energy is gradually converted into gravitational potential energy due to the influence of Earth's gravity. The kinetic energy decreases because the ball slows down, and at the peak of its trajectory, its velocity is zero, so all of the kinetic energy has been converted into gravitational potential energy.
As the ball starts to fall back down, the gravitational potential energy begins to convert back into kinetic energy. The ball accelerates due to gravity, increasing its speed as it descends. By the time the ball reaches the hand of the thrower or the ground, nearly all of the gravitational potential energy has been transformed back into kinetic energy (assuming no energy is lost due to air resistance or other non-conservative forces). The ball's speed upon impact will be roughly the same as the speed it had when it was initially released, again depending on air resistance and other factors.