Tetraphosphorus pentasulfide
The covalent compound with the molecular formula P4S5 is named tetraphosphorus pentasulfide, using the numerical prefixes 'tetra-' for four atoms of phosphorus and 'penta-' for five atoms of sulfur.
The covalent compound P4S5 can be named using the appropriate numerical prefixes according to the rules for naming binary covalent compounds. In this case, the prefix for four is 'tetra' and the prefix for five is 'penta'. Therefore, the name would be tetraphosphorus pentasulfide.
To name the compound, first, identify the elements present: phosphorus (P) and sulfur (S). Then, apply the prefixes that correspond to the number of atoms of each element in the molecule: tetra- for four phosphorus atoms and penta- for five sulfur atoms. Combine these with the root name of the elements, and add the suffix '-ide' to the second element.
What happens to the particles of an object as temperature is added to it or taken away from it
Answer:
If temperature added
If temperature is added to the object, the particles of the object vibrate faster, the space between atoms increases. The motion and spacing of the particles determines the space of matter of the object. This results in increased molecular motion, object expands and takes up more space
If temperature taken away
If temperature is taken away from object, the particles vibrate slower. The atoms can get closer result in the matter contracts.
In both cases the mass is not changes. and it happens in all solids, liquids and gases
Visible light, X Rays infrared radiation and radio waves all have the same
The common feature of visible light, X-rays, infrared radiation, and radio waves is that they all represent types of electromagnetic radiation, possessing different wavelengths and energy levels, but all moving at the speed of light.
Explanation:Visible light, X-rays, infrared radiation, and radio waves all fall under the umbrella of electromagnetic radiation, which consists of waves of energy that move through space at the speed of light. This spectrum includes, from longest wavelength to shortest: radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays. The important common feature between all these types of rays is that they travel at the same speed in a vacuum, which is the speed of light, at approximately 299,792 kilometers per second.
Each type of electromagnetic radiation is characterized by its wavelength and frequency, which determine its position in the electromagnetic spectrum. For example, X-rays have shorter wavelengths and thereby more energy, enabling them to penetrate human tissue. Visible light has wavelengths ranges from 380 to 740 nm, frequencies visible to the human eye. Infrared radiation and radio waves have longer wavelengths and lesser energy.
Learn more about Electromagnetic Radiation here:https://brainly.com/question/10759891
#SPJ11
what takes place during a redox reaction
In a redox reaction, one substance is oxidized (loses electrons) while another substance is reduced (gains electrons). An example is the reaction between hydrogen and fluorine.
Explanation:During a redox reaction, one substance gets oxidized, meaning it loses electrons, while another substance gets reduced, meaning it gains the electrons that were lost by the oxidized substance. This simultaneous oxidation and reduction is why these reactions are referred to as 'redox' reactions. For example, in the reaction between hydrogen and fluorine, H2 + F2 → 2HF, hydrogen is oxidized, as it loses an electron, and fluorine is reduced, as it gains the electron lost by hydrogen.
Learn more about redox reaction here:https://brainly.com/question/31600276
#SPJ6
Which of the following is a solution for reducing greenhouse gases?
public transportation
not recycling
cutting down more trees
Answer:
public transportation
mark me as brainliest
Answer:
A) public transportation
Explanation:
public transportation can help reduce the amount of cars that contribute to an accumulation of greenhouse gases
Wrong answers:
not recycling contributes to greenhouse gases by requiring new products to be made and contributing to land fills
cutting down more trees both requires tools that create greenhouse gases and lowers the number of trees that could help absorb greenhouse gases
Therefore, the correct answer is A) public transportation
Elements located in the vertical column of the periodic table are of the same and have____chemical properties.
Answer:
Similar
Explanation:
Elements that are located in the same vertical colomn or group of the periodic table have similar chemical properties. This is because they have the same amount of valence electrons in the outermost shell.
chemicals integrate to kill insects and other pests that damage crops are
I believe the answer is pesticides
Hello,
Farmer's use many chemicals on their crops. The specific chemical you are looking for is Insecticides. Insecticides are specifically for crops, and it is used to kill insects and bugs. There are three different kinds of pesticides, and the one that mainly kills bugs in insecticides
- I . A -
The four main economic systems include...
I would say traditional, command, market and mixed.
Hope this helped
Mind marking me brainliest. Thank you!
What type of energy is present in lightning?
A.) Electrical energy
B.) Chemical energy
C.) Nuclear energy
D.) Potential energy
A.) Electrical energy
is your answer
A.) Electrical
This was proven by Benjamin Franklin with his kite experiment.
What is the number of moles in 432g Ba(NO3)2
First there is a need to calculate the molar mass of Ba(NO₃)₂:
137.3 + 2 (14.0) + 6 (16) = 261.3 grams/mole
The molar mass, denoted by M in chemistry refers to a physical characteristic illustrated as the mass of a given component divided by the amount of the component. The molar masses are always denoted in grams/mole.
After finding the molar mass, the number of moles can be identified as:
432 grams / 261.3 g/mol = 1.65 moles of Ba(NO₃)₂.
The number of moles in 432g of Ba(NO₃)₂, is 1.653.
To calculate the number of moles in 432g of Ba(NO₃)₂, we first need to find its molar mass. The molar mass of Ba(NO₃)₂ is calculated as follows:
Ba: 137.3 g/molN: 2 x 14.0 g/mol = 28.0 g/molO: 6 x 16.0 g/mol = 96.0 g/molTherefore, the molar mass of Ba(NO₃)₂ is 261.3 g/mol.
Next, we use the formula for the number of moles:
Number of moles = mass / molar massSo, the number of moles of Ba(NO₃)₂ in 432g is:
Number of moles = 432g / 261.3 g/mol = 1.653 moleslewis structures cannot
Answer:
Show the strength of bonds.
Explanation:
Lewis structures just show the bonding but not the strength.
Answer:
Show the strength of bonds
Explanation:
An element's atomic number is 44. How many electrons would an atom of this element have?
Atomic number is the number of protons in an atom and is equal to the number of electrons also.
Atomic number = 44.
Hence number of electrons in an atom of this element (with atomic number 44) = 44 electrons.
the normal boiling point of liquid x is less than of y which is less than that of z which of the following is in the correct order of increasing vapor pressure of the three liquids at stp?
XYZ is the answer
mark brainliest if helpful
The correct order of increasing vapor pressure at STP for the liquids X, Y, and Z is Z, Y, X, because vapor pressure is inversely related to boiling point. Option B is correct.
The student has asked to arrange liquids X, Y, and Z in the correct order of increasing vapor pressure at Standard Temperature and Pressure (STP). Liquids boil when their vapor pressure becomes equal to the external pressure. As per the given information, the normal boiling point of X is less than that of Y, which is less than that of Z. It is known that the vapor pressure of a liquid is inversely related to its boiling point.
Therefore, the liquid with the lower boiling point will have a higher vapor pressure at a given temperature. Hence, since X has the lowest boiling point, followed by Y, then Z, the correct order of increasing vapor pressure at STP would be Z, Y, X.
Hence, B. is the correct option.
The complete question is:
The normal boiling point of liquid X is less than that of Y, which is less than that of Z. Which of the following is the correct order of increasing vapor pressure of the three liquids at STP?
A) X, Y, Z
B) Z, Y, X
C) Y, X, Z
D) X, Z, Y
E) Y, Z, X
Which statement is true about a proton and a neutron?
1) they have the same masses and different charges
2)they have the same masses and different charges
3) they have different masses and the same charge
4) they have different masses and different charges
Final answer:
The true statement is that protons and neutrons have approximately the same masses and different charges. Hence option 1- 'They have the same masses and different charges' is the correct answer.
Explanation:
The statement that is true about a proton and a neutron is that they have approximately the same masses and different charges. Both the proton and neutron have masses close to 1 atomic mass unit (amu), but they have different charges: the proton has a positive charge (+1), while the neutron is electrically neutral (0 charge).
Protons and neutrons, which reside in the nucleus of an atom, are considered the primary contributors to the atom's mass, as their mass is approximately 1836 times greater than that of an electron. Despite their similar masses, protons and neutrons differ significantly in their electric charge, which is crucial for understanding atomic structure and nuclear chemistry.
Which answer choice is an example of a correct chemical name?
Al2O3
aluminum oxygen
O3Al2
aluminum oxide
im very postive it is aluminum oxide (;
Hello There,
The answer is:
aluminum oxygen
Hope this help have a great day :)
The equation that describes the process of photosynthesis
the last choice is the equation for photosynthesis
Which of the following is NOT needed in air for water condensation to occur?
A. Temperature at the dew point
B. Condensation nuclei
C. Temperature inversion
D. Water vapor
Answer:
option C)
Explanation:
correct option is option C)
in troposphere when we move up the temperature goes on decreasing and the hot air from the earth surface comes into contact with the cold air of the troposphere then air gets condensed.
but in temperature inversion when moves up temperature increases and this leads the gases to not to condense.
please help tia!
Referring to the previous question, who had used more power ; the man who walked up the hill or the man who bicycled up the hill?
They both used the same amount of power
The one who walked
Neither of them used power
The one who bicycled
A sample of air with a volume of 2.20m3 at a pressure of 105 KPa and a temperature of 30c is cooled to 10c and the pressure is reduced to 75.0 KPa.
What is the new volume?
6.9
1.34
2.56
43.0
2.88
Answer: The answer is 2.88 m3
Explanation: Since temperature, pressure and volume are given in the question, the general gas equation will be useful in calculating the new volume.
General gas equation,
(P1V1)/T1 = (P2V2) /T2 ................ (1)
Where,
P1 = Initial pressure
P2 = Final pressure
V1 = Initial volume
V2 = Final volume
T1 = Initial temperature in kelvin
T2 = Final temperature in Kelvin
Hence, from the question :
P1 = 105 KPa = 105,000 Pa
P2 = 75 KPa = 75,000 Pa
V1 = 2.20 m3
V2 =?
T1 = 30 °C = (273+30) K = 303 K
T2 =10 °C = (273+10) K = 283 K
Therefore, substitute these value into the general gas equation as given in eq (1) above.
V2 = (P1V1T2) /P2V1
V2 = (105000×2.2×283)/ (75000×303)
V2 = 2.88 m3
a certain skin lotion is a fine mixture of water and various oils. this lotion is cloudy and cannot be separated into oil and water by filtration. moreover, it’s compon do not separate when left standing. what type of mixture is it
Final answer:
The lotion is a colloid, which is a stable mixture of water and oils that remains consistent without separation and exhibits the Tyndall effect.
Explanation:
The skin lotion described is a type of mixture known as a colloid. In this colloid, the water and oils do not separate upon standing, nor can they be easily filtered apart. The mixture is cloudy because the particles are large enough to scatter light, which is also known as the Tyndall effect. Typical lotions are oil-in-water emulsions that use substances to keep the mixture consistent without separation. Despite the presence of water and oils, which are generally immiscible, the formulation of lotions ensures that they remain stable and homogenous through the use of emulsifiers.
help me with this please!!
heterogeneous mixtures are those that are mixed, but not evenly. so you can see the different parts. compound is something made up of 2 or more elements. so, K will be a compound, as they are giving you the chemical formula, and showing there are 2 elements. and L is the heterogeneous mixture, as, even though it is crushed, the rocks can be picked apart.
think about putting a glass of water on the counter, in the freezer, and on a hot stove how does the temperature of the water affect the kinetic energy and physical state?
The kinetic energy and the physical state of water depend strongly on the temperature;
Firstly, The kinetic energy of water on a hot stove is higher than that on the counter in the freezer; that the kinetic energy is directly proportional to the temperature according to the relation: [tex]K = \frac{3RT}{2NA}[/tex] ; where R is the universal gas constant, T is the temperature and NA is Avogadro number.As the temperature increases, the speed of colliding molecules increases and the kinetic energy increases.
Secondly, The physical state of water depends on the temperature; water has three states (gas, liquid and solid) depends on the temperature.If a glass of water is putt on the counter in the freezer, it will be converted to the solid state (ice).And, as if it is putt on a hot stove, it will be vapor (gaseous state).I need help with #26
Radioactive substances decay and emit alpha, beta, positron, and gamma particles in the process of converting to stable nuclei. An alpha particle has two protons and two neutrons, is relatively heavy and deflected by electrical and magnetic fields. Beta particles are fast moving electrons which are greatly deflected by electrical and magnetic fields. Gamma particles (highly energetic) are neutral and not deflected electrical and magnetic fields. Positron is positively charged beta particle. Opposite charges attract each other. So we can say that alpha particle and positron being positively charged are attracted towards the negative plate. Alpha particle is heavy, so it is slightly deflected towards the negative plate. Beta particle being negatively charged is deflected towards the positive plate and gamma particle is neutral and not deflected in the electrical field.
Therefore, the correct answer is,
A. Beta particle
B. Gamma particle
C. Alpha particle
D. Positron
The correct answer indicating the particle deflected towards the positive plate is option A, the Beta particle. Options B (Gamma particle), C (Alpha particle), and D (Positron) are not deflected towards the positive plate in an electric field.
In the context of radioactive decay, the behavior of particles in electric and magnetic fields provides clues to their charge and mass.
Beta particles, being fast-moving electrons, are negatively charged and deflect towards the positive plate.
Gamma particles, being neutral, remain unaffected by electric and magnetic fields.
Alpha particles, although positively charged, are heavy and only slightly deflected towards the negative plate.
Positrons, being positively charged, would be attracted towards the negative plate.
Therefore, the correct answer indicating the particle deflected towards the positive plate is option A, the Beta particle. Options B (Gamma particle), C (Alpha particle), and D (Positron) are not deflected towards the positive plate in an electric field.
Learn more about radioactive decay here:
https://brainly.com/question/23959901
#SPJ6
How are electromagnetic waves affected as the frequency of the waves increases?
A) energy and wavelength increase
B) energy and wavelength decrease
C) energy decreases, wavelength increases
D) energy increases, wavelength decreases
As the frequency is how many waves pass a fixed point in certain amount of times. This means that the waves get closer together and, therefore, the wavelength decreases. It also means that the wave has more energy.
Answer: D) Energy increases, wavelength decreases
When the frequency of the waves increases, its energy increases, while the wavelength decreases.
• A travelling disturbance, which mediates energy from one place to another is known as a wave.
• The tendency to do work or cause a change is known as the energy.
• Waves can be determined with the help of frequency and wavelength.
• In a given unit of time, the number of complete wavelengths is known as frequency.
• With the increase of the size of wavelengths, its energy and frequency decreases.
• There are two basic kind of waves, that is, electromagnetic and mechanical waves.
• The waves, which can travel through a medium or a vacuum is known as the electromagnetic waves.
• The waves with long wavelengths comprise less energy than waves with short wavelengths.
Thus, correct answer is option d, that is, energy increases, wavelength decreases.
To know more about:
https://brainly.com/question/21043141
What is the density of the table tennis ball ? Record your answer to the nearest hundredth
The density of a table tennis ball cannot be determined without knowing its mass and volume.
Explanation:The density of a table tennis ball is the mass of the ball divided by its volume.
Since we do not have the mass or volume of the table tennis ball, we cannot calculate its density.
The density of an object is typically measured in grams per cubic centimeter (g/cm³) or kilograms per cubic meter (kg/m³).
Learn more about Density of table tennis ball here:https://brainly.com/question/29139183
#SPJ12
Table tennis ball's density can't be provided directly without specific mass or volume data. However, it's generally understood to be less than water's density since it floats in water. You can measure the ball’s mass and volume yourself to calculate the density.
Explanation:The density of an object can be calculated by dividing its mass by its volume. We don't have specific mass or volume values for a table tennis ball provided, so we cannot directly provide a density value. However, you can usually find this information on the ball packaging or from the manufacturer. Alternatively, you could calculate it yourself by measuring the mass of the ball using a scale, and the volume by displacement method in a liquid.
Remember, the unit of density is often expressed as grams per cubic centimeter (g/cm³) or kilograms per cubic meter (kg/m³) depending upon the unit system being used. If we were to compare a table tennis ball generally to water, which has a density of 1 g/cm³, we could say that the table tennis ball has a much lower density because it floats on water.
Learn more about Table Tennis Ball Density here:https://brainly.com/question/29139183
#SPJ12
An individual with an excellent sense of smell is handed a bottle of perfume. After smelling the perfume, he reports that the perfume contains a predominant smell of roses with a faint touch of vanilla. If the perfume is made from water, rose essence, and a splash of vanilla, it is most likely A. a mixture. B. a gas. C. an element. D. a compound.
Answer:
A. a mixture.
Step-by-step explanation:
If the perfume is made from water and anything else, it is a mixture.
B. is wrong, because water is a liquid at room temperature.
C. is wrong, because water is a compound.
D. is wrong, because the perfume is a mixture of water and other compounds.
Answer: A. a mixture.
Explanation:
Element is a pure substance which is composed of atoms of similar elements. It can not be decomposed into simpler constituents using chemical reactions.Example: Copper [tex]Cu[/tex]
Compound is a pure substance which is made from atoms of different elements combined together in a fixed ratio by mass.It can be decomposed into simpler constituents using chemical reactions. Example: water [tex]H_2O[/tex]
Mixture is a substance which has two or more components which do not combine chemically and do not have any fixed ratio in which they are present.The components do not combine chemically and hence retain their original properties. Example: perfume made from water, rose essence, and a splash of vanilla.
Thus the perfume is most likely a mixture as different components retain their original properties.
What do you, a complex, multicellular organism, have in common with this single-celled algae that lives in the ocean? A) We have nothing in common. B) We have similar cell structure. C) We have the exact same cell parts. D) We both need salt water to survive.
Answer:
The answer is "B". We have similar cell structure.
Explanation:
We have similar cell structure. The algae is made of one cell. We are made of many, many cells. The cells that make up complex living things are different from each other.
The thing that a complex, multicellular organism, has in common with single-celled algae that live in the ocean is B. We have a similar cell structure.
Cells are referred to as the building blocks of life. Cells are important for every organism. It should be noted that while a unicellular organism and one cell, the multicellular organisms have two or more cells. It should be noted that the unicellular organisms and the multicellular organisms have the same cell structure. In this case, the unicellular organisms and the multicellular organisms both have cytoplasm and plasma membranes. They also contain DNA and ribosomes which are important for gene expression.In conclusion, the correct option is B
Read related link on:
https://brainly.com/question/17745638
which describes the composition of the ocean floor?
The composition of the ocean floor can be described as option A. Basalt covered in sediment
which describes the composition of the ocean floor?Basaltic rocks are the main type of rock on the ocean floor. They are made from cooled lava. Basalt is a kind of rock that has a lot of iron and magnesium. It looks dark and smooth. It forms most of the bottom layer of the ocean.
The ocean floor has different types of stuff called sediments covering it. These sediments can come from land, like rocks breaking down and being carried away, or from sea creatures, like shells and skeletons collecting on the ocean floor.
Hence option a is correct.
Read more about ocean floor here:
https://brainly.com/question/1675090
#SPJ6
see full text below
Which describes the composition of the ocean floor?
A. Basalt covered in sediment
B. Sediment covered in basalt
C. Granite covered in sediment
D. Basalt covered in granite
Helppppp what are the atomic mass neutrons and nuclear charge to these elements? For 15 POINTS
In these atoms, the positive and negative charges cancel each other out, leading to an atom with no net charge.
(Protons, neutrons, and electrons)
which of the following for an object should be known to calculate its density
Density = mass / volume
therefore, both mass and volume are needed
the first one represents volume
The Space it occupies is the answer
Rutherford's research was primarily involved with: electron distribution defining the components of nuclei using electromagnetic energy
Answer is: defining the components of nuclei.
Rutherford theorized that atoms have their charge concentrated in a very small nucleus.
This was famous Rutherford's Gold Foil Experiment: he bombarded thin foil of gold with positive alpha particles (helium atom particles, consist of two protons and two neutrons).
Rutherford observed the deflection of alpha particles on the photographic film and notice that most of alpha particles passed straight through foil.
That is different from Plum Pudding model, because it shows that most of the atom is empty space.
Rutherford conducted research that led to the first splitting of the atom in a nuclear reaction.
Ernest Rutherford's research primarily focused on defining the components of nuclei, leading to the discovery of the atomic nucleus and a planetary model of the atom, which advanced the understanding of the atom's structure.
Ernest Rutherford, a pioneering physicist, is renowned for his groundbreaking work that led to the modern understanding of atomic structure. His research involved defining the components of nuclei through experiments with alpha particles. Rutherford's shocking discovery was that atoms consist of a tiny, dense, positively charged nucleus, revolutionizing the atomic model at the time.
Unlike the previous plum pudding model, which assumed a uniform distribution of electrons within a positively charged atom, Rutherford proposed that electrons orbit this central nucleus, analogous to planets orbiting the sun. This model represented a significant shift from the thought that electrons were uniformly distributed throughout the atom's volume. Rutherford's planetary model laid the foundation for the quantum mechanical principles that describe electron distribution in contemporary atomic theory.
Rutherford's experiments involved directing a beam of alpha particles, emitted from the radioactive decay of radium, at thin gold foil. Along with his colleagues Hans Geiger and Ernest Marsden, Rutherford observed the scattering of these particles, leading to the conclusion that a massive positive charge (the nucleus) occupied a minute portion of the atom's space.