Helium has a density of 1.79×10^-4 g/mL at standard temperature and pressure. A balloon has a volume of 6.3 liters. Calculate the mass of helium that it would take to fill the balloon. Be sure to follow significant figure rules when calculating the answer.
A. 35,000g
B. 1.1×10^-3 g
C. 2.8×10^-5 g
D. 1.1g
Consider the potassium permanganate reaction again.
2KMnO4 + 16HCl → 2KCl + 2MnCl2 + 8H2O + 5Cl2
How many moles of water are produced when 3.45 moles of KMnO4 react? Give your answer to the nearest 0.1 moles.
I know the answer is 13.8 moles but I dont know how to find this. Please explain.
Answer:
Moles of H2O produced = 13.8
Explanation:
Given:
Moles of KMnO4 reacted = 3.45
To determine:
moles of H2O produced
Explanation:
Given reaction:
2KMnO4 + 16HCl →2KCl + 2MnCl2 + 8H2O + 5Cl2
Based on the reaction stoichiometry:
2 moles of KMnO4 produces 8 moles of H2O
Therefore, moles of H2O produced when 3.45 moles of KMnO4 react is:
[tex]= \frac{3.45\ moles\ KMnO4 * 8\ moles\ H2O}{2\ moles\ KMnO4} = 13.8[/tex]
What number of atoms of phosphorus are present in 1.00g of each of the compounds in exercise 48?
Answer:
Explanation:
The compounds in exercise 48 are:
a) P4O6,
b) Ca3 (PO4)2, and
c) Na2 H PO4
So, proceed with the calculus for each compound.
a) Molecular formula: P4O6
Molar mass: 4 * 31 g/mol + 6* 16g/mol = 220 g/mol
Number of moles in 1.00 grams of compound = mass in grams / molar mass =
= 1.00 g / 220 g/mol = 0.004545 mol
0.004545 mol of P4O6 contains 4 * 0.004545 = 0.01818moles of atoms of P.
=> 0.01818 moles * 6.022 * 10^23 atoms / mol = 1.095 * 10^ 22 atoms of P.
Answer: 1.095 * 10^22 atoms of P.
b) Ca3 (PO4)2
molar mass = 3 * 40.1 g/mol + 2 * 31.0 g/mol + 8 * 16 g/mol = 310.3 g/mol
number of moles in 1.00 g of Ca3 (PO4)2 = 1.00 g / 310.3 g/mol = 0.00322 mol
0.00322 mol of compound * 2 mol P / mol of compound = 0.00644 mol P
0.00644 mol P * 6.022 * 10^23 atom / mol = 3.878 * 10 ^ 21 atoms P
Answer: 3.878 * 10^21 atoms P
c) Na2 H PO4
molar mass = 2 * 23.0 g/mol + 1 g/mol + 31.0 g/mol + 4 * 16g/mol = 142.0 g/mol
number of moles = 1.00 g / 142.0 g/mol = 0.0070 moles Na2HPO4
=> 0.0070 moles P
=> 0.0070 * 6.022 * 10^23 = 4.215 * 10^21 atoms of P
Answer: 4.215 * 10^21 atoms P
Final answer:
To determine the number of atoms of phosphorus in a compound, you need to use the molar mass and Avogadro's number. Convert the mass of the compound to moles and then multiply by Avogadro's number to get the number of atoms.
Explanation:
The number of atoms of phosphorus present in a compound can be determined using the molar mass and Avogadro's number. We need to convert the mass of the compound to moles using its molar mass, and then multiply by Avogadro's number to get the number of atoms.
For example, if we have 1.00g of phosphorus pentoxide (P2O5), we can calculate the number of atoms of phosphorus by:
Calculating the moles of P2O5 using its molar mass (141.94 g/mol) Converting the moles of P2O5 to moles of phosphorus using the ratio in the balanced equation (2 moles of P per 1 mole of P2O5) Multiplying the moles of phosphorus by Avogadro's number (6.022 x 1023 atoms/mol)
The result will be the number of atoms of phosphorus in 1.00g of P2O5.
The balanced equation for the reaction occurring when iron(iii) oxide, a solid, is reduced with pure carbon to produce carbon dioxide and molten iron is
Answer: The balanced chemical equation is written below.
Explanation:
A balanced chemical equation is defined as the equation in which total number of individual atoms on the reactant side is equal to the total number of individual atoms on the product side. These equations follow law of conservation of mass.
The chemical equation for the reaction of iron (III) oxide with carbon follows:
[tex]2Fe_2O_3(s)+3C(s)\rightarrow 3CO_2(g)+4Fe(l)[/tex]
By Stoichiometry of the reaction:
2 moles of solid iron (III) oxide reacts with 3 moles of pure carbon to produce 3 moles of carbon dioxide gas and 4 moles of molten iron
Hence, the balanced chemical equation is written above.
which one of the following ia a characteristic of a metal?
A metal sphere has a mass of 39.0g and a volume of 10.0cm is the sphere made of pure aluminum
If 1.20 moles of an ideal gas occupy a volume of 18.2 l at a pressure of 1.80 atm, what is the temperature of the gas, in degrees celsius?
We can calculate for temperature by assuming the equation for ideal gas law:
P V = n R T
Where,
P = pressure = 1.80 atm
V = volume = 18.2 L
n = number of moles = 1.20 moles
R = gas constant = 0.08205746 L atm / mol K
Substituting to the given equation:
T = P V / n R
T = (1.8 atm * 18.2 L) / (1.2 moles * 0.08205746 L atm / mol K)
T = 332.70 K
We can convert K unit to ˚C unit by subtracting 273.15 to Kelvin, therefore
T = 59.55 ˚C
What is a mixture?
A. Two compounds that chemically react
B. Compounds that cannot be separated from each other
C. Substances that are combined but do not chemically react
D. One substance that dissolves another substance
An undergraduate weighed out 20grams of sodium hydroxide pellets. If Na =23, O = 16 andH = 1, What is the mole of this sodium hydroxide.
Final answer:
To determine the number of moles of NaOH from 20 grams, calculate the substance's molar mass (39.997 g/mol) and divide the given mass by the molar mass, resulting in 0.5001 moles of NaOH.
Explanation:
The question asks about calculating the moles of sodium hydroxide (NaOH) from its mass in grams. To find moles, one has to use the molar mass of the substance.
First, calculate the molar mass of NaOH:
Na (1 x 22.990 g/mol) + O (1 x 15.999 g/mol) + H (1 x 1.008 g/mol) = 39.997 g/mol.
Next, use this molar mass to find the number of moles:
Given: 20.0 g NaOH,
Desired: moles NaOH
Since 1 mole of NaOH weighs 39.997 g, then:
moles of NaOH = mass (20 g) ÷ molar mass (39.997 g/mol) = 0.5001 moles.
What is the ph of a solution containing 0.12 mol/l of nh4cl and 0.03 mol/l of naoh (pka of is 9.25)?
The Henderson-Hasselbalch equation fails to provide accurate pH readings for excessively diluted buffer solutions because it ignores the self-dissociation that occurs in water. The pH of the solution is 8.65.
The Henderson-Hasselbalch equation establishes a connection between an acid's pKa (acid dissociation constant) and pH in aqueous solutions. When the concentration of the acid and its conjugate base, or the base and the corresponding conjugate acid, are known, the pH of a buffer solution can be determined with the use of this equation.
The expression used to calculate pOH is:
pOH = pKb + log [Conjugate acid]/ [Weak base]
pKa + pKb = 14
pKb = 14 - pKa
pKb = 14 - 9.25
pKb = 4.75
pOH = 4.75 + log 0.12 / 0.03
pOH = 5.35
pH = 14 - pOH
pH = 14 - 5.35
pH = 8.65
To know more about pH, visit;
https://brainly.com/question/27945512
#SPJ12
Is laundry detergent an element compound or mixture?
Green plants use light from the sun to drive photosynthesis. photosynthesis is a chemical reaction in which water and carbon dioxide chemically react to form the simple sugar glucose and oxygen gas.what mass of water is consumed by the reaction of carbon dioxide
The equation that represents the process of photosynthesis is:
6CO2+12H2O+light->C6H12O6+6O2+6H2O
Photosynthesis is the process in plants to make their food. This involves the use carbon dioxide to react with water and make sugar or glucose as the main product and oxygen as a by-product. Since we are not given the mass of CO2 in this problem, we assume that we have 1 g of CO2 available. We calculate as follows:
1 g CO2 ( 1 mol CO2 / 44.01 g CO2 ) ( 12 mol H2O / 6 mol CO2 ) ( 18.02 g / 1 mol ) = 0.82 g of H2O is needed
However, if the amount given of CO2 is not one gram, then you can simply change the starting value in the calculation and solve for the mass of water needed.
Final answer:
Photosynthesis involves converting carbon dioxide and water into glucose and oxygen with sunlight. The balanced chemical equation indicates a 6:1 mole ratio of water to glucose. The mass of water consumed would be six times the molecular weight of water times the moles of glucose formed.
Explanation:
Photosynthesis is a fundamental biological process in which green plants use sunlight to convert carbon dioxide (CO₂) and water (H₂O) into glucose (C₆H₁₂O₆) and oxygen (O₂). The balanced chemical equation for photosynthesis is:
6CO₂ + 6H₂O + sunlight → C₆H₁₂O₆ + 6O₂
The question asks about the mass of water consumed in the reaction with carbon dioxide to form glucose during photosynthesis. To determine this, you need to know the mole ratio between water and glucose from the balanced equation, which is 6:1, meaning six molecules of water are needed to produce one molecule of glucose. To find the specific mass of water used, you would multiply the molecular weight of water (18.01528 g/mol) by the number of moles of water consumed (which is typically six times the moles of glucose formed).
Aluminum metal reacts with iron(ii) sulfide to form aluminum sulfide and iron metal. what is the stoichiometric coefficient for aluminum when the chemical equation is balanced using the lowest, whole-number stoichiometric coefficients?
Answer: coefficient for aluminum is 2.
Explanation:
According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side. Thus chemical equations are balanced.
The skeletal equation is:
[tex]Al+FeS\rightarrow Al_2S_3+Fe[/tex]
The balanced equation for single displacement reaction is:
[tex]2Al+3FeS\rightarrow Al_2S_3+3Fe[/tex]
Thus the coefficient for aluminum when the chemical equation is balanced is 2.
How many grams of solute are present in 375 ml of 0.120 m kbr?
The balanced equation for the generation of sugar from sunlight water and co2 is
The balanced equation for the generation of sugar from sunlight water and CO₂ is
6 CO₂ + 6 H₂O → C₆H₁₂O₆ + 6 O₂
carbon dioxide + water → sugar + oxygen
The process of photosynthesis occurs when the chlorophyll present in the leaves of plants absorb sunlight to make food in the presence of carbon dioxide (enters through the stomata of leaves) and water (absorbed from the roots). As a result of this reaction sugar and oxygen is formed. After that sugar is converted in to starch and oxygen is released into air.
Photosynthesis is the biological process that transforms sunlight, water, and CO2 into glucose and oxygen. The balanced equation for photosynthesis is 6CO₂ + 6H₂O + light energy --> C6H12O6 + 6O2. The process includes intermediate reactions that eventually form simple carbohydrate molecules.
Explanation:The process that generates sugar from sunlight, water, and CO2 is called photosynthesis. The balanced chemical equation for photosynthesis is 6CO₂ + 6H₂O + light energy --> C6H12O6 + 6O2.
During photosynthesis, plants use sunlight energy to convert carbon dioxide gas (CO2) and water (H2O) into glucose (C6H12O6) and oxygen (O2). This process is complex and involves intermediate reactions and products.
Glyceraldehyde-3-phosphates, which are simple carbohydrate molecules that can be converted to glucose and various other sugar molecules, are formed during the course of the reaction.
Learn more about Photosynthesis here:https://brainly.com/question/29764662
#SPJ12
Sheila's measured glucose level one hour after a sugary drink varies according to the normal distribution with μμ = 120 mg/dl and σσ = 20 mg/dl. what is the level l such that there is probability only 0.15 that the mean glucose level of 5 test results falls above l?
Since the sample size is below 30, in this case we use the t statistic. The formula for t score is:
t = (x – u) / (σ / sqrt n)
where,
x = the level l = unknown
u = sample mean = 120 mg / dl
σ = standard deviation = 20 mg / dl
n = sample size or number of results = 5
Using the standard distribution tables for t, we can find the value of t given the probability (P = 0.15) and degrees of freedom (DOF).
t = 1.036
Going back to the formula for t score:
1.036 = (x – 120) / (20 / sqrt 5)
x = 129.27 mg / dl = l
Final answer:
To find the glucose level such that the probability of the mean of 5 tests being above it is 0.15, we calculate the reduced standard deviation for the mean of the tests, find the corresponding z-score for a cumulative probability of 0.85, and apply the formula for the mean's distribution. The level l is found to be 129.267 mg/dl.
Explanation:
The question asks for the level l such that there is only a 0.15 probability that the mean glucose level of 5 test results falls above l, given that Sheila's glucose level after a sugary drink follows a normal distribution with a mean (μ) of 120 mg/dl and a standard deviation (σ) of 20 mg/dl.
To solve for l, we first need to recognize that the distribution of the mean of several test results (in this case, 5) will also be normally distributed, with the same mean but with a reduced standard deviation that is equal to the original standard deviation divided by the square root of the number of tests (σ/√n). For 5 tests, the new standard deviation (σnew) is 20/√5 = 8.9443 mg/dl.
The next step involves determining the z-score that corresponds to a probability of 0.85 (since 1 - 0.15 = 0.85) in the standard normal distribution. Consulting a z-table or using statistical software, we find that the z-score corresponding to 0.85 is approximately 1.036. Using the formula l = μ + z σnew, we calculate:
l = 120 + (1.036)(8.9443) = 120 + 9.267 = 129.267 mg/dl.
Therefore, the level l such that there is a probability of only 0.15 that the mean glucose level of 5 test results falls above l is 129.267 mg/dl.
What action of the body would be disrupted if atmospheric pressure was innapropiate?
Consider KOH and the following information. Hsol = –58 kJ/mol Hhydr of = –336 kJ/mol Hhydr of = –532.7 kJ/mol What is the Hlat rounded to the correct number of significant figures? Use Hsol = –Hlat + Hhydr.
A. –927 kJ/mol
B. –926.7 kJ/mol
C. –811 kJ/mol
D. –810.7 kJ/mol
The total Hhydr is:
Hhydr = – 336 kJ/mol + – 532.7 kJ/mol
Hhydr = - 868.7 kJ/mol
Therefore using the formula Hsol = –Hlat + Hhydr we can get Hlat.
– 58 kJ/mol = – Hlat + - 868.7 kJ/mol
- Hlat = 810.7 kJ/mol
Hlat = - 810.7 kJ/mol
ANSWER:
D. –810.7 kJ/molAnswer:D
Explanation:
Using the table below, what is the change in enthalpy for the following reaction? 3CO (g) + 2Fe2O3 (s) Imported Asset Fe(s) + 3CO2 (g)
To solve this problem, we should recall that the change in enthalpy is calculated by subtracting the total enthalpy of the reactants from the total enthalpy of the products:
ΔH = Total H of products – Total H of reactants
You did not insert the table in this problem, therefore I will find other sources to find for the enthalpies of each compound.
ΔHf CO2 (g) = -393.5 kJ/mol
ΔHf CO (g) = -110.5 kJ/mol
ΔHf Fe2O3 (s) = -822.1 kJ/mol
ΔHf Fe(s) = 0.0 kJ/mol
Since the given enthalpies are still in kJ/mol, we have to multiply that with the number of moles in the formula. Therefore solving for ΔH:
ΔH = [3 mol ( − 393.5 kJ/mol) + 1 mol (0.0 kJ/mol)] − [3 mol ( − 110.5 kJ/mol) + 2 mol ( − 822.1 kJ/mol)]
ΔH = 795.2 kJ
How do you use the periodic table to recall the ionic charge of an alkali metal, an alkaline earth metal,or aluminum
The periodic table can be used to recall the ionic charge of alkali metals, alkaline earth metals, and aluminum by understanding the trends in the table.
Explanation:You can use the periodic table to recall the ionic charge of an alkali metal, alkaline earth metal, or aluminum by understanding the trends in the periodic table. The alkali metals (group 1) have a 1+ charge, alkaline earth metals (group 2) have a 2+ charge, and aluminum (group 13) has a 3+ charge. The ionic charges are determined by the number of electrons lost by the element.
For example, sodium, an alkali metal, has an atomic number of 11. It loses one electron and forms a cation with a 1+ charge. Calcium, an alkaline earth metal, has an atomic number of 20. It loses two electrons and forms a cation with a 2+ charge. Aluminum, in group 13, has an atomic number of 13. It loses three electrons and forms a cation with a 3+ charge.
Learn more about Using the periodic table to determine ionic charges of alkali metals, alkaline earth metals, and aluminum here:https://brainly.com/question/4409576
#SPJ12
Which of the following does not describe a characteristic of carbon?
A.) It is non-metallic
B.) It has four valence electrons
C.) It has an electron configuration of 1s2s2p2
D.) It forms bonds only, with itself and not other atoms.
Nitrogen is naturally abundant in the atmosphere. Why are nitrogen fertilizers added to soil, despite the dangers they produce when they enter aquatic ecosystems?
Nitrogen fertilizers are added to soil to provide readily available forms of nitrogen that plants can use. However, when these fertilizers enter aquatic ecosystems through runoff, they can cause eutrophication and harm aquatic fauna.
Explanation:Nitrogen fertilizers are added to soil despite the dangers they pose to aquatic ecosystems because atmospheric nitrogen is not readily available for plants to use. Most plants require nitrogen in the form of nitrate or ammonium, which can be obtained from fertilizers. However, when these fertilizers enter aquatic ecosystems through runoff, they can cause eutrophication, leading to the overgrowth of microorganisms and the depletion of dissolved oxygen levels, which can be harmful to aquatic fauna.
_______ is the classic structural formula for all the addictive narcotics
Research the amount of carbon dioxide generally found in the air and in breath. which has more carbon dioxide? what are some of the other sources of carbon dioxide in air?
Answer:
1- Carbon dioxide in our breath comes from the carbon in our food.
2- All plants need carbon dioxide to survive.
3- About .04 percent of the atmosphere's air is carbon dioxide and 4.4 percent of our breath is carbon dioxide we breathe out more carbon dioxide than we breathe in.
4- Some effects might include combustion with other gasses and it could also potentially kill all life.
Explanation:
In the reaction 2 c o2 → 2 co, how many moles of carbon are needed to produce 66.0 g of carbon monoxide
The solution would be like this for this specific problem:
Given:
66.0 g of carbon monoxide
mol e= mass / molar mass
In the given reaction moles of carbon are needed to produce 66.0 g of carbon monoxide is 2.35 moles.
How we calculate moles?Moles of any substance will be calculated as:
n = W/M, where
W = given mass
M = molar mass
Given chemical reaction is:
2C + O₂ → 2CO
Moles of 66g of CO = 66g / 28g/mol = 2.35 mol
2 moles of CO = produced by 2 moles of carbon
2.35 moles of CO = produced by 2.35 moles of carbon
Hence, required moles of carbon are 2.35 moles.
To know more about moles, visit the below link:
https://brainly.com/question/15374113
In an open system, the vapor pressure is _____ the outside air pressure.
A. Higher
B. Lower
C. Equal
D. Below
The vapor pressure is EQUAL TO the outside air pressure.
Answer: Option (c) is the correct answer.
Explanation:
In an open system, the vapor pressure is equal the outside air pressure because there can be mass transfer or energy transfer from the atmosphere to the system as the system is open.
Whereas in a closed system there cannot be mass transfer or energy transfer from the system to the surrounding or vice versa.
Thus, we can conclude that option (c) is the correct answer.
How many milliliters of a 0.266 m lino3 solution are required to make 150.0 ml of 0.075 m lino3 solution?
We need an equation that would relate the concentration of the original solution to that of the desired solution. To solve this we use the equation expressed as follows,
M1V1 = M2V2
where M1 is the concentration of the stock solution, V1 is the volume of the stock solution, M2 is the concentration of the new solution and V2 is its volume.
M1V1 = M2V2
0.266 M x V1 = 0.075 M x 150 mL
V1 = 42.29 mL
Therefore, we need about 42.29 mL of the 0.266 M of lithium nitrate solution to make 150.0 mL of the 0.075 M lithium nitrate solution.
[tex]\boxed{{\text{42}}{\text{.3 mL}}}[/tex] of a 0.266 M [tex]{\text{LiN}}{{\text{O}}_{\text{3}}}[/tex] solution is required to make 150 mL of a 0.075 M [tex]{\text{LiN}}{{\text{O}}_{\text{3}}}[/tex] solution.
Further Explanation:
The concentration is the proportion of substance in the mixture. The most commonly used concentration terms are as follows:
1. Molarity (M)
2. Molality (m)
3. Mole fraction (X)
4. Parts per million (ppm)
5. Mass percent ((w/w) %)
6. Volume percent ((v/v) %)
Molarity is a concentration term that is defined as the number of moles of solute dissolved in one litre of the solution. It is denoted by M and its unit is mol/L.
The molarity equation is given by the following expression:
[tex]{{\text{M}}_{\text{1}}}{{\text{V}}_{\text{1}}} = {{\text{M}}_{\text{2}}}{{\text{V}}_{\text{2}}}[/tex] …… (1)
Here,
[tex]{{\text{M}}_{\text{1}}}[/tex] is the molarity of the initial [tex]{\text{LiN}}{{\text{O}}_{\text{3}}}[/tex] solution.
[tex]{{\text{V}}_{_{\text{1}}}}[/tex] is the volume of the initial [tex]{\text{LiN}}{{\text{O}}_{\text{3}}}[/tex] solution.
[tex]{{\text{M}}_{\text{2}}}[/tex] is the molarity of the new [tex]{\text{LiN}}{{\text{O}}_{\text{3}}}[/tex] solution.
[tex]{{\text{V}}_{_{\text{2}}}}[/tex] is the volume of the new [tex]{\text{LiN}}{{\text{O}}_{\text{3}}}[/tex] solution.
Rearrange equation (1) to calculate [tex]{{\text{V}}_{\text{1}}}[/tex].
[tex]{{\text{V}}_{\text{1}}}=\frac{{{{\text{M}}_{\text{2}}}{{\text{V}}_{\text{2}}}}}{{{{\text{M}}_{\text{1}}}}}[/tex] …… (2)
The value of [tex]{{\text{M}}_{\text{1}}}[/tex] is 0.266 M.
The value of [tex]{{\text{M}}_{\text{2}}}[/tex] is 0.075 M.
The value of [tex]{{\text{V}}_{_{\text{2}}}}[/tex] is 150 mL.
Substitute these values in equation (2).
[tex]\begin{aligned}{{\text{V}}_{\text{1}}}&=\frac{{\left({{\text{0}}{\text{.075 M}}} \right)\left( {{\text{150 mL}}} \right)}}{{{\text{0}}{\text{.266 M}}}}\\&=42.29{\text{ mL}}\\&\approx 42.{\text{3 mL}}\\\end{aligned}[/tex]
Learn more:
1. What is the concentration of alcohol in terms of molarity? https://brainly.com/question/9013318
2. What is the molarity of the stock solution of luminol? https://brainly.com/question/2814870
Answer details:
Grade: Senior School
Subject: Chemistry
Chapter: Concentration terms
Keywords: molarity, LiNO3, 42.3 mL, molarity equation, volume, M1, M2, V1, V2, 150 mL, 0.075 M, 0.266 M, concentration, concentration terms.
True or false? In a two-column proof, the right column states your reasons.
If 100. mL of 0.400 M Na2SO4 is added to 200. mL of 0.600 M NaCl, what is the concentration of Na+ ions in the final solution? Assume that the volumes are additive.
The concentration of Na ion in the final solution is 0.66 M.
To calculate the concentration of Na ions in the solution, the moles of [tex]\rm Na_2SO_4[/tex] in the solution have been calculated.
Moles = molarity [tex]\times[/tex] volume (L)
The molarity of [tex]\rm Na_2SO_4[/tex] solution given is = 0.4
Volume of [tex]\rm Na_2SO_4[/tex] solution = 100 ml = 0.1 L.
Moles of [tex]\rm Na_2SO_4[/tex] = 0.4 [tex]\times[/tex] 0.1
Moles of [tex]\rm Na_2SO_4[/tex] = 0.04
The dissociation of [tex]\rm Na_2SO_4[/tex] will be as follows:
[tex]\rm Na_2SO_2\;\rightarrow\;2\;Na^+\;+\;SO_4^2^-[/tex]
1 mole of [tex]\rm Na_2SO_4[/tex] = 2 moles of Na ions.
0.04 moles of [tex]\rm Na_2SO_4[/tex] = 0.04 [tex]\times[/tex] 2
0.04 moles of [tex]\rm Na_2SO_4[/tex] = 0.08 moles of Na ions.
The moles of Na ions in NaCl solution will be:
Given, molarity of NaCl solution = 0.6 M
Volume of NaCl solution = 200 ml = 0.2 L.
Moles of Na ions in NaCl solution = 0.6 [tex]\times[/tex] 0.2
Moles of Na ions in NaCl solution = 0.12.
The dissociation of NaCl will be as follows:
[tex]\rm NaCl\;\rightarrow\;Na^+\;+\;Cl^-[/tex]
1 mole of NaCl = 1 mole of Na ions
0.12 moles of NaCl gives = 0.12 moles of Na ions.
Thus the total Na ions = Na ion in [tex]\rm Na_2SO_4[/tex] + Na ions in NaCl
Total moles of Na ions = 0.08 + 0.12
Total moles of Na ions = 0.2 moles.
The total volume of solution will be :
0.1 L [tex]\rm Na_2SO_4[/tex] + 0.2 L NaCl
= 0.3 L.
Concentration of Na ion in the final solution = [tex]\rm \dfrac{moles}{volume\;(L)}[/tex]
The concentration of Na ion in the final solution = [tex]\rm \dfrac{0.2}{0.3}[/tex] M
Concentration of Na ion in the final solution = 0.66 M.
The concentration of Na ion in the final solution is 0.66 M.
For more information about the concentration, refer to the link:
https://brainly.com/question/7127950
At -70 ∘c and 5.2 atm, carbon dioxide is in which phase?
A phase diagram is a temperature vs pressure plot from which the phase of a compound can be deduced under the given temperature and pressure conditions. The 3 equilibrium curves: Solid-Gas, Liquid-Gas and Solid-Liquid separate the compound into the three states of matter. The 3 states can however coexist at a unique point referred to as the triple point.
Based on the phase diagram for CO2 (which is readily available online), at -70 C and 5.5 atm, CO2 exist as a solid.