Answer:
False, When an object rolls over a surface, the kind of friction that occurs is called ROLLING FRICTION
Explanation:
The correct term for the kind of friction that occurs when an object rolls over a surface is rolling friction, not round friction, making the statement False. Rolling friction, which is different from sliding friction, is weaker and allows a rolling object to travel farther.
The kind of friction that occurs when an object rolls over a surface is not called round friction, making the statement False. When an object rolls over a surface, the friction is correctly called rolling friction. Rolling friction is a force that resists the motion of an object rolling on a surface. It happens due to deformations at the contact area between the rolling object and the surface. Unlike sliding friction, which occurs when there is relative motion between two surfaces in contact without rolling, rolling friction generally requires less force to overcome due to the reduced contact area and the nature of the motion.
During rolling motion, especially without slipping, a kinetic friction force can also arise if there is relative motion between the surfaces. However, rolling friction is primarily responsible for slowing down a rolling object over time, even in the absence of air resistance. It is significantly weaker than sliding friction, allowing a rolling object to travel much farther than it could slide on the same surface. The force of rolling friction is necessary for rolling motion, as it provides the torque needed to change the object’s angular momentum.
how do you relate between magnetic field from current carrying wires with the force felt by a current carrying wire?
Answer:
"The magnetic field exert the force on current carrying wire in the direction of the individual charge particles moving."
Explanation:
The magnetic field that exert force in the current carrying wire in the same direction in which the charge particles moving came from the Right hand rule. The force are very higher that are sufficient to move the wire, hence, current particles have large number or moving particles in it. The wires through which current is flowing attract each other even in same direction because of the right hand rule only and also the formation of the magnetic field around the wire. The lines of force are the magnetic field.
2) If two locations have the same latitude and are on a coast, what factor determines the air temperature
Ocean Currents is the factor that determines the air temperature in coastal regions having same latitude.
Explanation:
There are factors that use to determine air temperature. They are latitude, altitude, region, water current, etc and it is based on the combination of water, air, and land.
If two coastal regions situated in the same latitude means they are not in the same region. Another city can be in the same latitude but in longitude. All the coastal regions don't have the same air temperature.
The air temperature in coastal regions can measured by the Ocean Current. A hypothesis of using cold water and warm water use to determine the air temperature.
The force of attraction between the opposite charges of the ions in an ionic compound
The force of attraction between the opposite charges of the ions in an ionic compound is an ionic bond.
Explanation:
The transfer process of valence electron between atoms referred as ionic bond. This is a kind of chemical bonds which can create two oppositely charged ions. In the presence of ionic bonds, the metal loses electrons and becomes a positive charge cation, while non-metal accepts these electrons and becomes a negative charge anion.
Here, more than 1 electron can be emitted or received to meet the octet principle and the net charge of the compound should be zero. For example: Table salt. In this compound, sodium loses the electron to become [tex]N a^{+}[/tex], while the chlorine loses the electron to become [tex]c l^{-}[/tex].
The force of attraction between opposite charges of ions in an ionic compound is caused by electrostatic forces, forming what is known as an ionic bond. This creates stability in the compound and the strength of this attraction is measured by the lattice energy. While ionic compounds are generally poor electrical conductors in their solid state, they can become excellent conductors when dissolved or melted.
Explanation:The force of attraction between the opposite charges of the ions in an ionic compound, often referred to as an ionic bond, is a result of electrostatic forces. For instance, in sodium chloride or table salt, positively charged sodium ions bond with negatively charged chloride ions, forming a crystalline molecule with exception of any net charge. That's because of the attraction between the oppositely charged ions which keeps them in close proximity.
An ionic compound is stable due to this electrostatic attraction between its positive and negative ions. An important concept in this context is lattice energy: it's the energy required to separate a mole of a solid ionic compound into its gaseous ions, and is essentially a measure of the strength of the ionic bonds in the compound.
Ionic compounds, or salts, tend to be rigid and brittle, having high melting and boiling points - all indications of the strength of ionic bonds. They are poor conductors of electricity in solid state as the strength of these bonds prevents ions from moving freely, however, once dissolved or melted, ionic compounds turn into excellent conductors because the ions can now move freely.
Learn more about Ionic Bonds here:https://brainly.com/question/11527546
#SPJ3
an electromagnetic wave has a frequency of 6.0 x 10^18 Hz. What is the wavelength of the wave?
Answer:
500 nm
Explanation:
[tex]\lambda = c/\nu = \frac{3*10^8}{6*10^{18}} = 5*10^{-11}[/tex] m
Answer:
5*10^-11
Explanation:
From alvs
The infection where the air sacs in the lungs fill up with fluids is called:
A.
Pneumonia
B.
COPD
C.
Sleep apnea
D.
None of the above
Answer:
A
Explanation:
Pneumonia
A diesel engine has an input temperature of 300K and an efficiency of 33.3%. Calculate the exhaust temperature. Tc = K
The exhaust temperature is 200 K
Explanation:
The maximum efficiency of a machine is given by the equation:
[tex]\eta=1-\frac{T_C}{T_H}[/tex]
where:
[tex]T_H[/tex] is the temperature of the hot reservoir
[tex]T_C[/tex] is the temperature of the cold reservoir
For the engine in this problem, we have:
[tex]\eta = 0.333[/tex] (efficiency is 33.3%)
[tex]T_H=300K[/tex] is the temperature of the hot reservoir
Re-arranging the equation for [tex]T_C[/tex], we can find the exhaust temperature (the temperature of the cold reservoir):
[tex]T_C=T_H(1-\eta)=(300)(1-0.333)=200 K[/tex]
Learn more about temperature:
brainly.com/question/1603430
brainly.com/question/4370740
#LearnwithBrainly
Answer:
200k
Explanation:
a 75 kilogram boy initally at rest skis down the slope as shown assuming no frictional loss what will be his kinetic energy at the bottom of the slope
Answer:
The kinetic energy at bottom, K.E = 73500 J
Explanation:
Given data,
The mass of the boy, m = 75 kg
Let the height of the hill be, h = 100 m
The P.E is maximum at the top of the hill. Since the boy is at rest at the top of the hill, his K.E is zero.
When he reaches the bottom, his K.E is maximum and P.E is zero.
According to the law of conservation of energy, K.E at the bottom is equal to the P.E at top.
P.E = mgh
= 75 x 9.8 x 100
= 73500 J
Hence, the kinetic energy at bottom, K.E = 73500 J
explain why when someone uses his thumb to push a pin into a block of wood the pressure on the wood is greater than the pressure on this thumb
When someone uses his thumb to push a pin into a block of wood the pressure on the wood is greater than the pressure on this thumb because the area of the pin on the thumb side is larger than the area of the pin on the wood side
What is pressure?The total applied force per unit of area is known as the pressure.
The pressure depends both on externally applied force as well the area on which it is applied.
The mathematical expression for the pressure
Pressure = Force /Area
the pressure is expressed by the unit pascal or N /m²
Since, the area of the pin on the thumb side is larger than the area of the pin on the wood side, when someone uses his thumb to push a pin into a block of wood, the pressure on the wood is greater than the pressure on this thumb.
Learn more about pressure here
brainly.com/question/28012687
#SPJ2
There are four springs stretched by the same mass.
Spring A: 25 cm
Spring B: 10 cm
Spring C: 100 cm
Spring D: 1 cm
Which spring is the strongest?
A
B
C
D
Answer:
That would be Spring C
Explanation:
i took the test :P
Answer:
The answer is C please give me brainliest
Explanation:
Which of the following describes the measure of current
Answer:
b. The rate at which charge flows
Explanation:
First we must complete the question:
Which of the following describes the measure of current:
a. The quality of the charge flow
b.The rate at which charge flows
c. The ability for something to have a charge flow
d.The potential for a charge to flow
The answer is b) The rate at which charge flows
The electric current is the electric charge flow that passes through a conductive material for a certain period of time. It is expressed in C / s, culombios per second in the international system of units, and the unit is known as Ampere (a)
The charge can be defined by culombio [C]
A wave with a period of three seconds travels at a speed of 12 m/s what is the wavelength of the wave
Answer:
λ = 0.28m
Explanation:
Equation used is v = λf, where v is velocity, λ is wavelength, and f is frequency
We need to find wavelength so rearrange the equation in term of wavelength.
v = λf
λ = f/v
We know that period is the inverse of frequency (f = 1/T), so lets substitute that into our equation
λ = f/v
λ = (1/T)/v
Plug in your the given values given in the question.
We're given v=12m/s and T=3sec
λ = (1/T)/v
λ = (1/3)/12
λ = 1/36 = 0.2777777 = 0.28m
Final answer:
The wavelength of a wave with a 3-second period traveling at 12 m/s is 36 meters.
Explanation:
To find the wavelength of a wave, you can use the formula:
wavelength = wave speed x period. In this case, the period of the wave (T) is 3 seconds and the wave speed (v) is 12 m/s.
wavelength = 12 m/s x 3 s = 36 meters.
Therefore, the wavelength of the wave is 36 meters.
If revenue is $3,000 and operating expenses are $4,000, cash flow equals _____. -$1,000 $1,000 -$7,000 $7,000
Answer:
-$1,000
Explanation:
$3000 - $4000
Answer:
-1000
3000-4000=-1000
The moon is not seen at all on the new moon.why???
The moon is not seen at all on the new moon because:
The moon itself doesn't make a light, it reflects sunlight. At the point when the moon lies between the Earth and the Sun, it is just the posterior of the moon that is light by the Sun. In this circumstance, the side of the moon confronting the Earth can't mirror any light whatsoever and seems dull.
The distinction between another moon and a sunlight based over-shadowing is during a sun oriented obscuration, the moon is actually in the position to completely obstruct the sun during the day.
Hi please help me with this question. ..
A man throws a stone upwards with a 'u' velocity and after spending ' t' seconds watching the motion of the stone he once again projects another stone upwards hoping that that these 2 stones should meet eachother. If his assumption is correct and these two stones collide with eachother, show that the 2 stones should meet each other 't/2 + u/g 'seconds later from the time of the first projection.
Explanation:
For projectile motion, use constant acceleration equation:
Δx = v₀ t + ½ at²
where Δx is the displacement,
v₀ is the initial velocity,
a is the acceleration,
and t is time.
Both objects are projected upward with velocity u. The second object is thrown after a time t₀.
For the first object:
Δx = u t + ½ (-g) t²
Δx = u t − ½g t²
For the second object:
Δx = u (t−t₀) + ½ (-g) (t−t₀)²
Δx = u (t−t₀) − ½g (t−t₀)²
Assuming the objects meet, the displacements will be equal:
u t − ½g t² = u (t−t₀) − ½g (t−t₀)²
u t − ½g t² = u (t−t₀) − ½g (t² − 2tt₀ + t₀²)
u t − ½g t² = u t − u t₀ − ½g t² + g tt₀ − ½g t₀²
0 = -u t₀ + g tt₀ − ½g t₀²
0 = -u + g t − ½g t₀
g t = u + ½g t₀
t = u/g + t₀/2
Sonja is riding her bike. She takes her feet
off the pedals to freewheel down a hill.
Describe the energy transfers that take place as the bike travels down the hill.
Ignore friction and air resistance.
Answer:gravity
Explanation:
As Sonja coasts down the hill on her bike, the gravitational potential energy is converted into kinetic energy, which is the energy that increases her speed as she moves downhill.
When Sonja freewheels down the hill on her bike, the primary energy transfer is the conversion of gravitational potential energy to kinetic energy. At the top of the hill, the bike has a certain amount of potential energy due to its elevated position. As she moves downhill, this potential energy is converted into kinetic energy, which is the energy of motion, allowing the bike to increase in speed.
If we were not to ignore friction and air resistance, these factors would cause some of the kinetic energy to transform into thermal energy, due to the friction between the bike tires and the road as well as the air resistance against the rider and the bike.
However, since the question asks us to ignore these factors, we focus solely on the transformation of gravitational potential energy into kinetic energy as Sonja coasts down the hill.
A rubbit gets down from a rump which its /\x=0.85m in 0.5s, The rubbit's mass is 2kg, what is the net Force?
Answer: 13.6 N
Explanation:
The equation of motion for the rabbit is:
[tex]\Delta x=V_{ox}t+\frac{1}{2}a_{x}t^{2}[/tex] (1)
Where:
[tex]\Delta x=0.85 m[/tex] is the distance traveled by the rabbit
[tex]V_{ox}=0 m/s[/tex] is the rabbit's initial velocity, assuming it started from rest
[tex]t=0.5 s[/tex] is the time
[tex]a_{x}[/tex] is the acceleration
Isolating [tex]a_{x}[/tex]:
[tex]a_{x}=\frac{2 \Delta x}{t^{2}}[/tex] (2)
[tex]a_{x}=\frac{2 (0.85 m)}{(0.5)^{2}}[/tex] (3)
[tex]a_{x}=6.8 m/s^{2}[/tex] (4)
On the other hand, the force [tex]F_{x}[/tex] is given by:
[tex]F_{x}=m.a_{x}[/tex] (5)
Where [tex]m=2 kg[/tex] is the mass of the rabbit
Substituting (4) in (5):
[tex]F_{x}=(2 kg)(6.8 m/s^{2})[/tex] (6)
Finally:
[tex]F_{x}=13.6 N[/tex]
A 10kg rocket is traveling at 80 m/s when the booster engine applies a constant forward force of 60 N for 3.0 seconds. What impulse
does the booster engine supply? What is the resulting velocity of the rocket?
Answer:
Impulse = 90
Resulting Velocity = 89
Explanation:
Use F * change in time = m * change in velocity.
For the first part of the question, the left side of the equation is the impulse. Plug it in.
60 * (3.0 - 0) = 90.
For the second half. we use all parts of the equation. I'm gonna use vf for the final velocity.
60 * (3.0 - 0) = 10 * (vf - 80). Simplify.
90 = 10vf - 800. Simplify again.
890 = 10vf. Divide to simplify and get the answer.
The resulting velocity is 89.
The impulse supplied by the booster engine is 180 Ns and the resulting velocity of the 10kg rocket is 98 m/s.
The question involves calculating the impulse delivered by the booster engine of a rocket and its resulting velocity. The impulse is obtained through the relationship Impulse = Force × Time. By applying a constant forward force of 60 N for 3.0 seconds, the impulse can be calculated as:
Impulse = 60 N × 3.0 s = 180 Ns (Newton-seconds)
To find the resulting velocity of the rocket, we use the impulse-momentum theorem which states that the impulse applied to an object is equal to the change in momentum of the object. Since the rocket's mass is constant, the change in momentum can also be expressed as the mass of the rocket times the change in velocity (Impulse = Change in momentum = Mass × Change in velocity). Therefore:
Change in velocity = Impulse / Mass
Change in velocity = 180 Ns / 10 kg = 18 m/s
The initial velocity of the rocket is 80 m/s, so the final velocity of the rocket after the impulse will be:
Final velocity = Initial velocity + Change in velocity = 80 m/s + 18 m/s = 98 m/s
Two persons A and B do same amount of work. The person A does that work in t1sec and the person b in t2sec. Find the ratio of power delivered by them.
The ratio between power of A and power of B is 2
Explanation:
In physics, power is defined as the ratio between the work done and the time taken to do the work:
[tex]P=\frac{W}{t}[/tex]
where
P is the work done
t is the time taken
In this problem, we have:
Person A and person B do the same amount of work --> let's call this work W
Person A does this work in a time of [tex]t_A = 1 s[/tex], so the power delivered by A is
[tex]P_A = \frac{W}{1}=W[/tex]
Person B does this work in a time of [tex]t_B = 2 s[/tex], so the power delivered by B is
[tex]P_B = \frac{W}{2}[/tex]
So, the ratio of the powers delivered by the two persons is
[tex]\frac{P_A}{P_B}=\frac{W}{W/2}=2[/tex]
Learn more about power:
brainly.com/question/7956557
#LearnwithBrainly
All leukocytes fight off infections by using phagocytosis.
A.
True
B.
False
the question is correct
A snowboard has a mass of 1.53 kg. What is the static frictional force on the snowboard if the
waxed snowboard was lying horizontally on a wet & snowy surface (u s = 0.2)?
Answer:
Static friction, F=2.9988 N
Explanation:
Static Friction: It is the friction between two or more solid body that are not moving relative to each other.
When an external force is applied to a body that is in contact with another body, static friction opposes the applied force upto a certain limit, keeping the body at rest. When the applied force exceeds the certain limit the body begins to move. At that moment applied force is equal to limiting value of static friction F.
It varies linearly with normal force(N)
F∝N
F=μN (where μ is constant of proportionality and known as coefficient of static friction)
Now,
Mass, m=1.53 kg
Coefficient of static friction, μ=0.2
Normal force, N=m×g
=[tex]1.53\times9.8[/tex] (g=9.8 m/s²)
=14.994 N
Static friction, F= μN
=[tex]0.2\times14.994[/tex]
= 2.9988 N
Different color ca
ferent color candy canes are tested to see
one type dissolves faster. What is the
independent variable?
Answer: The color of candy cane
Explanation:
An independent variable is the Variable that the scientist changed in order to change the dependent variable. The scientist changes the color of the candy cane to test the rate at which they dissolve.
Final answer:
The independent variable in this experiment is the color of the candy canes, while the dependent variable is the rate of dissolution. The student is testing different colors to see if they affect the dissolution rate.
Explanation:
The independent variable in this experiment is the different color of candy canes. The dependent variable is the rate at which each type of candy cane dissolves. By testing different colored candy canes, the student is investigating if there is a difference in the dissolution rate based on color.
this is the process of organisms adapting to he environment overtime
Natural selection is the process of organisms adapting to their environments over time.
Explanation:
Natural selection refers the process to various survival and multiplication of organisms due to environmental properties. For example peacock, pepper moth, etc. These lead to evolutionary changes in which individual with specific traits has higher survival or reproduction than individuals in other populations and passes on these hereditary genetic traits to their offspring.
A process in which organisms are well suited to the surroundings than others generate more offspring. Due to this process, the percentage of organisms that adapt to the environment is increasing with each generation.
What is the law of conservation of Machanical energy?
Final answer:
The law of conservation of mechanical energy states that the total mechanical energy (kinetic plus potential) in a closed system subjected to conservative forces remains constant, assuming no energy is lost via non-conservative forces like friction.
Explanation:
Law of Conservation of Mechanical Energy
The law of conservation of mechanical energy states that in a closed system where only conservative forces are acting, and in the absence of non-conservative forces such as friction or air resistance, the total mechanical energy of the system remains constant. Mechanical energy is the sum of the object's kinetic energy (energy due to motion) and potential energy (energy stored due to position). This implies that any loss in potential energy will result in an equal increase in kinetic energy, and vice versa, hence keeping the total energy unchanged.
As an example, consider a roller coaster. At the highest point, the car has maximum potential energy and minimum kinetic energy. As the car descends, potential energy decreases while kinetic energy increases. If we assume no energy loss to friction, the sum of potential and kinetic energies at any point will equal the total mechanical energy at the top of the first rise, illustrating the conservation of mechanical energy.
In mathematical terms, the law can be expressed as K + U = constant, where K represents kinetic energy and U represents potential energy. This conservation is also a consequence of the work-energy theorem when applied to conservative forces, leading to the understanding that the net work done is equal to the change in kinetic energy of the system.
James threw a ball vertically upward with a velocity of 41.67ms-1 and after 2 second David threw a ball vertically upward with a velocity of 55.56ms-1.When the balls will be at the same height?
Answer:
When have passed 3.9[s], since James threw the ball.
Explanation:
First, we analyze the ball thrown by James and we will find the final height and velocity by the time two seconds have passed.
We'll use the kinematics equations to find these two unknowns.
[tex]y=y_{0} +v_{0} *t+\frac{1}{2} *g*t^{2} \\where:\\y= elevation [m]\\y_{0}=initial height [m]\\v_{0}= initial velocity [m/s] =41.67[m/s]\\t = time passed [s]\\g= gravity [m/s^2]=9.81[m/s^2]\\Now replacing:\\y=0+41.67 *(2)-\frac{1}{2} *(9.81)*(2)^{2} \\\\y=63.72[m]\\[/tex]
Note: The sign for the gravity is minus because it is acting against the movement.
Now we can find the velocity after 2 seconds.
[tex]v_{f} =v_{o} +g*t\\replacing:\\v_{f} =41.67-(9.81)*(2)\\\\v_{f}=22.05[m/s][/tex]
Note: The sign for the gravity is minus because it is acting against the movement.
Now we can take these values calculated as initial values, taking into account that two seconds have already passed. In this way, we can find the time, through the equations of kinematics.
[tex]y=y_{o} +v_{o} *t-\frac{1}{2} *g*t^{2} \\y=63.72 +22.05 *t-\frac{1}{2} *(9.81)*t^{2} \\\\y=63.72 +22.05 *t-4.905*t^{2} \\[/tex]
As we can see the equation is based on Time (t).
Now we can establish with the conditions of the ball launched by David a new equation for y (elevation) in function of t, then we match these equations and find time t
[tex]y=y_{o} +v_{o} *t+\frac{1}{2} *g*t^{2} \\where:\\v_{o} =55.56[m/s] = initial velocity\\y_{o} =0[m]\\now replacing\\63.72 +22.05 *t-(4.905)*t^{2} =0 +55.56 *t-(4.905)*t^{2} \\63.72 +22.05 *t =0 +55.56 *t\\63.72 = 33.51*t\\t=1.9[s][/tex]
Then the time when both balls are going to be the same height will be when 2 [s] plus 1.9 [s] have passed after David throws the ball.
Time = 2 + 1.9 = 3.9[s]
State law of floatation
The law of floatation states that, a floating body displaces its own weight of the fluid in which it floats.
The position of an object along the x-axis is described by the formula x = 3t 2 − 2t. Which of the following are the correct formulas for the velocity and acceleration of the object?
Answer:
the formulas of velocity and acceleration can be given as:
Velocity : [tex]x'=6t-2[/tex]
Acceleration :[tex]x"=6[/tex]
Explanation:
Given:
The position function or formula for an object along x-axis is given by:
[tex]x=3t^2-2t[/tex]
To find the velocity and acceleration formulas.
Solution.
Velocity of an object is defined as rate of change of position of an object.
The rate of change can be found out by taking derivative of the position function of the object.
Thus the velocity formula can be written as:
[tex]x'=\frac{d}{dt}3t^2-\frac{d}{dt}2t[/tex]
[tex]x'=6t-2[/tex] [ As [tex]\frac{d}{da}a^n= na^{(n-1)}[/tex] and [tex]\frac{d}{da}na=n[/tex] ]
So, the velocity can be represented as [tex]x'=6t-2[/tex]
Acceleration of an object is defined as rate of change of velocity. In order to find rate of change of velocity, we will take derivative of the velocity function.
Thus the acceleration formula can be given as :
[tex]x''=\frac{d}{dt}6t-\frac{d}{dt}2[/tex]
[tex]x''=6[/tex] [ As [tex]\frac{d}{da}na=n[/tex] and [tex]\frac{d}{da}n=0[/tex] ]
So, the acceleration can be represented as [tex]x''=6[/tex]
The correct answer for the velocity and acceleration of the object described by the position formula x = 3t² - 2t are v = 6t-2 and a = 6. The correct option is d.
The correct formulas for the velocity and acceleration of the object described by the position formula x = 3t² - 2t are: v=6t-2 ; a=6
To find the velocity, we take the first derivative of the position equation with respect to time. The velocity is the derivative of position, so we differentiate x = 3t² - 2t to get v = 6t - 2. To find the acceleration, we take the second derivative of the position equation with respect to time. The acceleration is the derivative of velocity, so we differentiate v = 6t - 2 to get a = 6.
Complete Question:
content loaded
The position of an object along the x-axis is described by the formula x = 3t² - 2t. Which of the following are the correct formulas for the velocity and acceleration of the object?
a. [tex]$v=2 t^3-t, a=2 t-3$[/tex]
b. [tex]$v=6 t^2-4, a=12 t$[/tex]
c. [tex]$v=(1 / 2) t^3-2 t, a=(5 / 2) t^4-(2 / 3) t^2$[/tex]
d. v=6t-2, a=6
a 40.0 kilogram child exerts a 100 newton force on a 50.0 kilogram object the magnitude of the force that the object exerts on the child is?
A) 0.0N
B) 80.0N
C) 100N
D) 125N
Answer:
The answer is choice C.
Explanation:
According to Newtons third law of motion, the force that object exerts on the child is equal and opposite to the force that the child exerts on the object:
[tex]F_{child}=-F_{object}[/tex]
Thus if the child exerts a force of 100 newtons on the object, the object must also exert a force of 100 newtons on the child but in the opposite direction.
The magnitude of the force the object exerts on the child is 100 N.
The given parameters;
mass of the child, m = 40 kgforce exerted by the child, F = 100 Nmass of the object = 50 kgAccording to Newton's third law of motion, for every action there is an equal and opposite reaction.
The magnitude of the force the child exerted on the object is equal to the force the object exerted on the child.The direction of these forces are opposite.Thus, the magnitude of the force the object exerts on the child is 100 N.
Learn more here: https://brainly.com/question/20871179
An object with a mass of 20 kg has a net force of 80 N acting on it. What is the acceleration of the object?
Answer:
4 m/s²
Explanation:
The formula used here:
F = ma
F is force (80 N)
m is mass (20 kg)
a is acceleration
Since we need to calculate acceleration we will arrange the formula:
a = F ÷ m
Now substitute the values and solve
a = 80 ÷ 20
a = 4
The proper unit for this acceleration is m/s²
So the object accelerates at 4 m/s²
Answer:
4 m/s^2
Explanation:
F = ma
80N = (20kg)a
80N/(20kg) = (20kg)a/(20kg)
4 m/s^2 = a
What force causes the periodic motion of a pendulum?
O
A. Gravity
O
O
O
B. Elastic force
C. Nuclear force
D. Electric force
Answer:
the Answer is A
Explanation:
because the swinging motion of a pendulum is due to the force of gravity generated by the earth's size
please help me i don't get it
Answer:
39)
a) distance traveled = 1 mile
b) displacement = 0 mile
40) - 4 (m/s)
41-) distance traveled = 5 [m]
displacement = 3.6 [m]
Explanation:
The distance differs from the displacement, the distance traveled is equal to the sum of all displacements made by the particle or object.
Displacement is the difference between the initial point and the final point where the object or particle was stopped.
Then we can use the equation given:
[tex]a=\frac{(v_{f} - v_{i} )}{t} \\where:\\v_{f}=16[m/s]\\v_{i}=2[m/s]\\t=3.5[s]\\a=\frac{(2-16)}{3.5}\\ a=-4[m/s][/tex]
The minus sign means the particle is slowing down.
For the 41) we can see the attached image.
In the graph we can see that the particle moves north 3 miles, so that the first distance is 3 miles, then moves 2 miles east being the second distance of 2 miles. Thus the sum of the distances is 3 + 2 = 5 miles.
Displacement is the difference between the endpoint and the initial point since the form of displacement is a straight line, we can use the formula of the straight line or the theorem of Pythagoras.
[tex]d=\sqrt{(2-0)^{2}+(3-0)^{2} }\\d=3.6 [mi][/tex]