Which of the following causes a chemical change?

A. moving B. shattering C. burning D. melting

Answer: C. 118

Explanation:

Depending on what version you are using, most periodic tables have more than 92 elements on a periodic table.

As

Answer: The volume of solvent evaporated is 173.57 mL

Explanation:

[tex]\text{Molarity of the solution}=\frac{\text{Moles of solute}\times 1000}{\text{Volume of solution (in mL)}}[/tex]    .....(1)

Molarity of solution = 0.275 M

Volume of solution = 230.0 mL

Putting values in equation 1, we get:

[tex]0.275M=\frac{\text{Moles of solution}\times 1000}{230.0}\\\\\text{Moles of solution}=\frac{0.275\times 230}{1000}=0.0632mol[/tex]

As, the moles of solution remains the same.

When solvent gets evaporated, the volume of the solution is calculated by using equation 1:

Moles of solution = 0.0632 moles

Molarity of the solution = 1.15 M

Putting values in equation 1, we get:

[tex]1.15=\frac{0.0632\times 1000}{\text{Volume of solution}}\\\\\text{Volume of solution}=\frac{0.0632\times 1000}{1.15}=56.43mL[/tex]

Volume of solution evaporated = (230.0 - 56.43) mL = 173.57 mL

Hence, the volume of solvent evaporated is 173.57 mL

Hello!

Find the Energy of the Photon by Planck's Equation, given:

E (photon energy) =? (in Joule)

h (Planck's constant) = [tex] 6.626*10^{-34}\:J * s [/tex]

f (radiation frequency) = [tex] 8*10^{12}\:Hz [/tex]

Therefore, we have:

[tex] E = h*f [/tex]

[tex] E = 6.626*10^{-34}*8*10^{12} [/tex]

[tex] E = 53.008*10^{-34+12} [/tex]

[tex] E = 53.008*10^{-22} [/tex]

[tex] \boxed{\boxed{E = 5.3008*10^{-21}\:Joule}}\end{array}}\qquad\checkmark [/tex]

I Hope this helps, greetings ... DexteR! =)

The energy of an electromagnetic wave with a frequency of 8 × 1012 Hz is calculated using the formula E = hf. Using Planck's constant, 6.626 × 10-34 J·s, the energy is found to be 5.3008 × 10-21 Joules.

To find the energy of an electromagnetic wave with a given frequency, we use the formula E = hf, where E is the energy, h is Planck's constant, and f is the frequency of the wave. Planck's constant (h) is approximately 6.626 × 10-34 J·s. Therefore, for an electromagnetic wave with a frequency of 8 × 1012 Hz, the energy can be calculated as follows:

The energy of an electromagnetic wave with a frequency of 8•1012 Hz can be calculated using Planck's equation: E = hf, where E is the energy, h is Planck's constant (6.626 x 10-34 J•s), and f is the frequency in Hz.

E = hf = (6.626 × 10-34 J·s) × (8 × 1012 Hz)

Now multiply the two numbers:

E = 5.3008 × 10-21 J

Plugging in the values, we get:

E = (6.626 x 10-34 J•s) × (8•1012 Hz)

Simplifying, the energy is approximately 5.3 x 10-21 J.

So, the energy of an electromagnetic wave with a frequency of 8 × 1012 Hz is 5.3008 × 10-21 Joules. This formula is critical in understanding the relationship between the frequency of electromagnetic radiation and its energy, and is a cornerstone of quantum mechanics.

Answer:

The relationship between where elements is located in a block and super scripted value appearing at the end of the electronic configuration is that it gives information on the group the element exist in each block.

Explanation:

Blocks in the periodic table are divided as S, P, D AND F blocks.  Representing elements with a electronic configuration gives information on the block that the elements falls on . For example Sodium and fluorine configurations are as follows ;

Sodium → 1s²2s²2p∧6 3s∧1

flourine → 1s²2s²2p∧5

The outer shell that ends the configuration determines the block it belongs. In this case sodium belongs to the s block while fluorine belongs to the p blocks. Then the super scripted value which is 1 for sodium depict it belong to group 1 of the s blocks. The super scripted  value for fluorine which is 5 shows the element belongs to group 5 in the p blocks.

The block in which an element is located in the Periodic Table determines the type of subshell the last electron occupies. The superscript at the end of the electron configuration indicates the number of electrons in the corresponding subshell.

The location of an element within a block in the Periodic Table determines the type of subshell that the last electron occupies. The electron configuration details in what order the electrons fill up in different orbitals in an atom. In an electron configuration, the superscripted value - often referred to as the exponent - indicates the number of electrons in a particular subshell.

For instance, if an element is located in the 's block', the superscript value will represent the number of electrons in an 's' orbital. Similarly, if an element is located in the 'p block', the superscript value at the end of the electron configuration will denote the number of electrons in a 'p' orbital. In a d block, the d orbital's electron count is represented, and for the f block, the f orbital's.

This connection between electron configuration, blocks in the Periodic Table, and location of an element is a fundamental concept in the study of atomic structure and chemistry.

https://brainly.com/question/32364157

#SPJ6

Answer: The correct answer is Option A.

Explanation:

Enthalpy change is defined as the difference in enthalpies of all the product and the reactants each multiplied with their respective number of moles. It is represented as [tex]\Delta H^o[/tex]

The equation used to calculate enthalpy change is of a reaction is:  

[tex]\Delta H^o_{rxn}=\sum [n\times \Delta H^o_f(product)]-\sum [n\times \Delta H^o_f(reactant)][/tex]

For the given chemical reaction:

[tex]PbO(s)+CO(g)\rightarrow Pb(s)+CO_2(g);\Delta H^o=-131.4kJ[/tex]

The equation for the enthalpy change of the above reaction is:

[tex]\Delta H^o_{rxn}=[(1\times \Delta H^o_f_{(Pb(s))})+(1\times \Delta H^o_f_{(CO_2(g))})]-[(1\times \Delta H^o_f_{(PbO(s))})+(1\times \Delta H^o_f_{(CO(g))})][/tex]

We are given:

[tex]\Delta H^o_f_{(CO_2(g))}=-393.5kJ/mol\\\Delta H^o_f_{(CO(g))}=-110.5kJ/mol\\\Delta H^o_f_{(Pb(s))}=0kJ/mol\\\Delta H^o_{rxn}=-131.4kJ[/tex]

Putting values in above equation, we get:

[tex]-131.4=[(1\times \Delta H^o_f_{(0)})+(1\times (-393.5))]-[(1\times \Delta H^o_f_{(PbO(s))})+(1\times (-110.5))]\\\\\Delta H^o_f_{(PbO(s))}=-151.6kJ/mol[/tex]

Hence, the correct answer is Option A.

Letter A. do not react with other or chemically.

The answer is: B. metal.

Metals conduct an electric current in liquid and solid state, because they have mobile electrons.

Metallic bond is formed between electrons and positively charged metal ions.

Metallic bond increace electrical and thermal conductivity.

For example, thermal conductivity of sodium is 140 W/(m·K).

Nonmetals have low electrical and thermal conductivity.

The four groups attached to the central carbon of an amino acid are an amino group ([tex]\rm -NH_2[/tex]), a carboxyl group ([tex]\rm -COOH[/tex]), a hydrogen atom ([tex]\rm -H[/tex]), and a side chain group (also called an R group).

Amino acid is an organic compound which is defined as the amine substituted carboxylic acid.

-The amino group (-NH2) and carboxyl group (-COOH) are both functional groups that are involved in the formation of peptide bonds between amino acids during protein synthesis.

-The hydrogen atom (-H) is simply a single proton that is attached to the central carbon atom of the amino acid.

-The side chain group (R group) is a variable group that differs between different amino acids. The R group can be a simple alkyl group, a complex aromatic group, or a charged group, among others.

Therefore, an amino group ([tex]\rm -NH_2[/tex]), a carboxyl group ([tex]\rm -COOH[/tex]), a hydrogen atom ([tex]\rm -H[/tex]), and a side chain group (also called an R group) are the four groups attached to the central carbon of an amino acid.

Learn more about Amino acid here:

https://brainly.com/question/30586602

#SPJ4

Final answer:

Amino acids have four distinct groups attached to a central alpha carbon: an alpha-amine group, an alpha-carboxyl group, a hydrogen atom, and a variable R-group unique to each amino acid.

Explanation:

Every amino acid consists of four groups covalently attached to a central alpha carbon, also known as the α-carbon. These include:

This structure is essential in biology for protein synthesis, as amino acids are the building blocks of proteins. Each amino acid's specific R-group influences the protein's structure and function.

Answer: Option (A) is the correct answer.

Explanation:

When a solute is dissolved in a solvent then in order to dissolve the solute it is necessary that attractive forces between the solute must be broken such that solute molecules can combine with solvent molecules.

By increasing temperature, pressure, surface area etc of a solution we can break the attractive forces between the solute.

Thus, we can conclude that in order for a solute to dissolve in a solvent it is true that the attractive forces in a solute need to be broken.

Answer: It does not change.

Explanation:

[tex]H_2CO_3(aq) +H_2O\rightarrow H_3O^+(aq)+HCO_3^-(aq)[/tex]

According to Le Chatelier's principle, if an equilibrium reaction is subjected to a change, the reaction adjusts itself in a way to undo the change imposed.

The effect of pressure affects the equilibrium only when the reactants or products are in gaseous phase.

As none of the reactants or products is in gaseous state, there is no effect of pressure on equilibrium.

The equilibrium of the reaction H₂CO₃ + H₂O <-> H₃O⁺ + HCO₃⁻ is not affected by changes in pressure because it does not involve gases. This is in contrast to reactions involving gases, where increasing pressure favors the side with fewer moles of gas.

The reaction H₂CO₃ + H₂O <-> H₃O⁺ + HCO₃⁻ takes place in water and has reached equilibrium. When the pressure is increased, the equilibrium will shift according to Le Chatelier's principle. Since there are no gases on either side of the equilibrium, pressure changes will not affect the position of the equilibrium. However, this differs from the equilibrium of a reaction involving gases, such as C(s) + H₂O(g) = CO(g) + H₂(g), where increasing pressure would favor the side with fewer moles of gas, shifting the equilibrium to the left.

Answer:

[tex]V_{m} = \frac{V}{n}[/tex]

Explanation:

Molar volume is the volume occupied by 1 mole of a substance.

For gases, based on the ideal gas law we have:

[tex]PV = nRT[/tex]

where, P = pressure, V= volume, n = moles, R = gas constant, T = temperature

[tex]\frac{V}{n} = \frac{RT}{P}[/tex]

Here, the molar volume is given as:

[tex]V_{m} = \frac{V}{n}[/tex]

Under standard temperature and pressure conditions, the molar volume of an ideal gas is 22.4 L/mol

Answer: Option (b) is the correct answer.

Explanation:

The energy necessary to remove an electron from a gaseous atom or ion is known as ionization energy.

This means that smaller is the size of an atom more amount of energy has to be supplied to it in order to remove the valence electron. This is because in small atom or element there will be strong force of attraction between the nucleus and electrons.

So, high amount of energy has to be supplied to remove the valence electrons.

As electronic configuration of helium is [tex]1s^{2}[/tex]. So, due to completely filled valence shell it is more stable in nature.

As a result, we need to provide very high amount of energy to remove an electron from a helium atom.

Thus, we can conclude that out of the given options helium element would the first ionization energy of the atom be higher than that of the diatomic molecule.

Final answer:

The element for which the first ionization energy of the atom would be higher than that of the diatomic molecule is boron.

Explanation:

The element for which the first ionization energy of the atom would be higher than that of the diatomic molecule is boron (option a).

Ionization energy is the energy required to remove an electron from an atom or molecule. In the case of boron, removing an electron from the filled 1s² subshell requires much more energy compared to the diatomic molecule. The first ionization energy values for boron, beryllium, and carbon are given as follows: B: 25,026 kJ/mol, Be: 6223 kJ/mol, C: 7475 kJ/mol. As you can see, boron has a much higher first ionization energy.

To find the number of atoms in 131.97 liters of water vapor at STP, divide the volume by 22.4 L/mol to get the moles, then multiply by Avogadro's number and the number of atoms per water molecule, resulting in approximately 1.0645 × 10²⁵ atoms.

The question asks how many atoms are in 131.97 liters of water vapor at STP (standard temperature and pressure), which is a chemistry problem involving concepts around molar volume and Avogadro's number.

At STP, one mole of an ideal gas occupies 22.4 liters.

Therefore, the number of moles of water vapor in 131.97 liters can be found by dividing the total volume by the volume of one mole, which results in approximately 5.89 moles of water vapor.

Since water (H2O) consists of 3 atoms per molecule and the number of molecules in one mole of any substance is 6.022 × 1023 (Avogadro's number), we can calculate the total number of atoms in the given volume of water vapor as follows:

5.89 moles × 3 atoms/molecule × 6.022 × 10²³ atoms/mole = 1.0645 × 10²⁵ atoms.

Therefore, the correct answer is D.) 1.0645 × 10²⁵ atoms.

Answer

Rutherford inferred the existence of a dense, positively charged nucleus based on results of a scattering experiment.

Explanation

Bohr proposed a planetary model of the atom to explain the emission spectrum of hydrogen. Hence option B is incorrect.

Einstein explained the observation of the photoelectric effect experiment by stating that light has particle-like properties. Hence option C is incorrect.

Schrödinger proposed that electrons have wave like nature.  Hence option D is incorrect.

Ernest Rutherford is correctly matched with his inference of a dense, positively charged nucleus based on a scattering experiment. He developed the nuclear model, which described the atom like a mini solar system. Niels Bohr used this model to explain the atomic spectrum of hydrogen.

Contribution to Atomic Theory

The scientist correctly matched with his contribution to atomic theory in the given options is Ernest Rutherford. Rutherford inferred the existence of a dense, positively charged nucleus based on the results of his gold foil scattering experiment. This discovery was crucial to the development of the nuclear model of the atom. Rutherford's model described the atom as having a tiny, dense nucleus surrounded by lighter, negatively charged electrons, resembling a mini solar system, which later became known as the planetary model of the atom.

It was Niels Bohr who, convinced by the validity of Rutherford's model, based his theory on it. Bohr's theory explained the atomic spectrum of hydrogen and established new principles in quantum mechanics. The identification of the proton as a component of the nucleus was indeed suggested by Rutherford in 1920, and he coined the term proton for the positively charged particles found there. However, contrary to one of the statements from the quiz, it is not correct to attribute the confirmation of the existence of protons to Bohr. Additionally, Einstein's photoelectric effect experiment did establish the particle-like properties of light but wasn't directly related to the structure of the atom. The discovery of the neutron is credited to James Chadwick in 1932, a student of Rutherford, not to Rutherford himself.

Answer:

Answer:

The symbol in the parenthesis indicate (C) the physical state of each reactant and product

Explanation:

There are symbols used to represent the physical state of a reactant or product, the most common being (s) for solid, (l) for liquid, (g) for gas, and (aq) for aqueous, or water like. Precipitate is also considered a physical state and is represented by a downward-facing arrow. In this case, the only symbols used in the chemical equation are (aq) and (s). Therefore, C is the correct answer.

[tex]CaCl_{2(aq)} + 2AgNO_{3(aq)}[/tex] → [tex]Ca(NO_{3})_{2(aq)} + 2AgCl_{(s)}[/tex]

The other answers:

A. the catalyst used in the reaction

Because it is neither a reactant nor a product, a catalyst is shown in a chemical equation by being written above the yield arrow. The yield arrow is what would be the equals sign in a normal equation.

B.  the number of atoms of each reactant and product

These are represented by the subscripts. In the given chemical equation, these numbers are 2, 3, 3, and 2 (left to right).

D.  the number of units of each reactant and product

These are represented by the coefficients. In the given chemical equation, these numbers are 1, 2, 1, and 2 (left to right). The ones are implied, so there's no need to write them down.

I hope this helps!

The percent composition of each element in vinegar, also known as acetic acid, is as follows: Carbon - 39.9%, Hydrogen - 6.7%, and Oxygen - 53.4%, calculated using their respective atomic masses and the molar mass of acetic acid.

The chemical formula for vinegar, which is also known as acetic acid, is C2H4O2. Each molecule of vinegar contains two atoms of Carbon (C), four atoms of Hydrogen (H), and two atoms of Oxygen (O). The percent composition of each element in vinegar can be calculated using their atomic masses and the overall molar mass of vinegar.

The molar mass of acetic acid is 60.06 g/mol. Using this information and the atomic masses of carbon (12.01 g/mol), hydrogen (1.01 g/mol), and oxygen (16.00 g/mol), we can calculate the percent composition by volume of each element in vinegar as follows: Carbon constitutes 39.9%, Hydrogen constitutes 6.7%, and Oxygen constitutes 53.4% of the total composition.

https://brainly.com/question/34955205

#SPJ12

Answer: The order with respect to B is

Explanation: Rate law says that rate of a reaction is directly proportional to the concentration of the reactants each raised to a stoichiometric coefficient determined experimentally called as order.

[tex]Rate=k[A]^x[B]^y[/tex]

k= rate constant

x = order with respect to A

y = order with respect to B

n = x+y = Total order

a) From trial 1: [tex]20=k[0.20]^x[0.10]^y[/tex]    (1)

From trial 2: [tex]40=k[0.20]^x[0.20]^y[/tex]    (2)

Dividing 2 by 1 :[tex]\frac{40}{20}=\frac{k[0.20]^x[0.20]^y}{k[0.20]^x[0.10]^y}[/tex]

[tex]2=2^y,2^1=2^y[/tex] therefore y=1.

Thus order with respect to B is 1.

Given the data in the accompanying table, the reaction order for B is 1st order. The correct option is B.

We may study how the initial rate of the reaction varies when the initial concentration of B is changed to establish the reaction order for B.

We can detect the link between the rate and the concentration of B by comparing the start rate of the reaction at different initial concentrations of B.

Based on the information provided:

Initial concentration of B: [B] (mol/L)

Initial rate: mol/Ls

When [B] is 0.20 mol/L, the initial rate is 20 mol/Ls.

When [B] is 0.40 mol/L, the initial rate is 160 mol/Ls.

As we can see, increasing the initial concentration of B (from 0.20 mol/L to 0.40 mol/L) doubles the initial rate (from 20 mol/Ls to 160 mol/Ls). This suggests that the starting rate and the concentration of B have a direct proportional connection.

Here, one can conclude that the reaction order for B is 1st order. Therefore, the correct answer is B) first.

For more details regarding reaction order, visit:

https://brainly.com/question/33426359

#SPJ6

Final answer:

The cohesion-tension theory explains how water ascends in plants via the xylem, driven by water molecule cohesion and tension from evaporation in the leaves, creating a negative water potential gradient.

Explanation:

The cohesion-tension theory is a scientific model that explains the process of water movement within plants. According to this theory, water is able to move upwards from the roots to the leaves via the xylem due to the cohesive properties of water molecules and the tension created by water evaporation. Cohesion refers to the tendency of similar molecules to stick together, which is particularly strong among water molecules due to hydrogen bonding. As water evaporates from the mesophyll cells in the leaves, it creates a negative water potential gradient, effectively pulling more water up through the plant's xylem vessels, akin to a continuous water column. This tension is further aided by the adhesive forces between the water molecules and the walls of the xylem cells.

An element belongs to particular group is related to the number of electrons present in the outer shell of the atoms. In given case, group is 2, therefore, number of valence electrons is 2 implies it has ability to lose two electrons to get +2 charge.

[tex]A\rightarrow A^{+2}+2e^{-}[/tex]

Therefore, ion formed after removal of two electrons is [tex]A^{2+}[/tex].

Hence, option (D) is the correct answer.

The ion of an element from Group 2A can be represented as D. A²⁺

The periodic table shows the arrangement of elements into groups and periods.

Group II elements are elements with 2 electrons in the outermost shell (hence they have 2 valence electrons).

Group II element can lose this 2 valence electrons thereby forming a +2 cation.

The ion of an element from Group 2A can be represented as D. A²⁺

Find out more at: https://brainly.com/question/13557064

Answer: Option (a) is the correct answer.

Explanation:

Ionic compounds have atoms bonded through ionic bonds.

An ionic bond is formed when there is transfer of electrons from one atom to another. Also, ionic compounds have opposite charge on their atoms hence, they are attracted by strong intermolecular forces.

Thus, compound whose atoms are holded by strong intermolecular forces of attraction are solid.

Therefore, we can conclude that ionic compounds are normally in solid physical state at room temperature.

Answer: Conditions it was formed under, where it was formed, and what it is composed of.

Explanation:

Answer: 1. For a endothermic reaction , energy is absorbed

2. The temperature recorded by a thermometer in an endothermic reaction would be reduced.

Explanation:

Endothermic reactions are defined as the reactions in which energy of the product is greater than the energy of the reactants. The total energy is absorbed in the form of heat and [tex]\Delta H[/tex] which is difference between energy of products and energy of reactants come out to be positive.  The temperature of the surroundings will decrease.

Exothermic reactions are defined as the reactions in which energy of the product is lesser than the energy of the reactants. The total energy is released in the form of heat and [tex]\Delta H[/tex] which is difference between energy of products and energy of reactants comes out to be negative.The temperature of the surroundings will increase.