To solve this problem we will also apply the concept related to the conservation of the mass, which announces that: "In an isolated system, during any ordinary chemical reaction, the total mass in the system remains constant, that is, the mass consumed by the reagents is equal to the mass of the products obtained. "
If the mass is in a closed system, it cannot change. This assessment should not be confused with the transformation of the matter within it, for which it is possible that over time the matter will change from one form to another. For example during a chemical reaction, there is a rupture of links to reorganize into another, but said mass in the closed system is maintained.
The correct answer is:
C. "The mass of a closed system cannot change over time; mass cannot be created or destroyed."
The following statements correctly describe the law of conservation of energy - c. The mass of a closed system cannot change over time; mass cannot be created nor destroyed
The law of conservation of mass states that the mass is an isolated system that can not be created nor destroyed.
conserved means saved, so according to the law of conservation of mass refers to the "saving" of mass.
Thus, The following statements correctly describe the law of conservation of energy - c. The mass of a closed system cannot change over time; mass cannot be created nor destroyed
Learn more:
https://brainly.com/question/13416057
A 92kg astronaut and a 1200kg satellite are at rest relative to the space shuttle. The astronaut pushes on the satellite, giving it a speed of 0.14m/s directly away from the shuttle. Seven and a half seconds later the astronaut comes into contact with the shuttle. What was the initial distance from the shuttle to the astronaut?
Answer:
13.7m
Explanation:
Since there's no external force acting on the astronaut or the satellite, the momentum must be conserved before and after the push. Since both are at rest before, momentum is 0.
After the push
[tex]m_av_a + m_sv_s = 0[/tex]
Where [tex]m_a = 92kg[/tex] is the mass of the astronaut, [tex]m_s = 1200kg[/tex] is the mass of the satellite, [tex]v_s = 0.14 m/s[/tex] is the speed of the satellite. We can calculate the speed [tex]v_a[/tex] of the astronaut:
[tex]v_a = \frac{-m_sv_s}{m_a} = \frac{-1200*0.14}{92} = -1.83 m/s[/tex]
So the astronaut has a opposite direction with the satellite motion, which is further away from the shuttle. Since it takes 7.5 s for the astronaut to make contact with the shuttle, the distance would be
d = vt = 1.83 * 7.5 = 13.7 m
This is a conservation of momentum problem where the astronaut moves opposite to the direction of the satellite's movement due to Newton's third law. The astronaut's velocity is calculated using the conservation of momentum principle, and the distance between him and the shuttle is then determined via the formula for distance.
Explanation:This problem involves understanding the conservation of momentum in a system with no external forces acting on it. When an astronaut pushes a satellite in space, there's a reaction force acting back on the astronaut due to Newton's third law. So, the astronaut will also move in the opposite direction. Keep in mind that the net momentum before and after this action remains zero as there are no external forces.
We're given that the astronaut comes into contact with the shuttle seven and half seconds after pushing on the satellite. He must have been moving at a certain speed to cover the distance in this time. Due to conservation of momentum, we can set up an equation as follows: Momentum of Astronaut + Momentum of Satellite = 0 (Because initially they were at rest). We can then calculate this to find the velocity of the astronaut.
After getting the velocity of the astronaut, we use the formula for distance: Distance = Speed * Time to get the initial distance between astronaut and Shuttle.
Learn more about Conservation of Momentum here:https://brainly.com/question/33316833
#SPJ3
Suppose that you release a small ball from rest at a depth of 0.600 m below the surface in a pool of water. If the density of the ball is 0.300 that of water and if the drag force on the ball from the water is negligible, how high above the water surface will the ball shoot as it emerges from the water? Neglect any transfer of energy to the splashing and waves produced by the emerging ball.
Answer:
1.4m
Explanation:
Which of the following statements are true? A. Earth's gravity has no effect on astronauts inside the International Space Station. B. An astronaut's mass is greater on Earth than on the Moon. C. An astronaut's weight is the same on the Moon as on Earth. D. An astronaut's mass is the same on the International Space Station as it is on Earth. E. None of these statements are true.
The given statement "An astronaut's mass is the same on the International Space Station as it is on Earth" is true.
Answer: Option D
Explanation:
There is usually a slight difference between mass and the weight of an object. The difference is that the mass of any object is independent of its acceleration due to gravity or gravitational influence of the planet where it is present.
Similarly, the weight of any object will be influenced by the gravitational force of that planet as the weight is directly proportional to the acceleration due to gravity of that planet.
So, the other three options are false and those three options states that weight of an object on Earth is equal to the weight of that object on any other planet. This is not true. So, the fourth option related to the mass of an astronaut in and outside Earth is true as it is equal theoretically.
An astronaut's mass being the same on the International Space Station as it is on Earth is a true statement.
What is Mass?Thus is defined as the resistance a matter offers to a change in its speed or position when force is applied.
Gravitational force doesn't determine the mass of objects which is why an astronaut's mass on International Space Station will be the same as on Earth. This therefore makes option D the most appropriate choice.
Read more about Mass here https://brainly.com/question/25121535
2. Fracture mechanics. A structural component in the form of a wide plate is to be fabricated from a steel alloy that has a plane- strain fracture toughness of 98.9 MPa √ m and a yield strength of 860 MPa . The flaw size resolution limit of the flaw de tection appa ratus is 3.0 mm . If the design stress is one- half the yield strength and the value of Y is 1.0, determine whether a critical flaw for this plate is subject to detection.
Answer:
the critical flaw is subject to detection since this value of ac (16.8 mm) is greater than the 3.0 mm resolution limit.
Explanation:
This problem asks that we determine whether or not a critical flaw in a wide plate is subject to detection given the limit of the flaw detection apparatus (3.0 mm), the value of KIc (98.9 MPa m), the design stress (sy/2 in which s y = 860 MPa), and Y = 1.0.
[tex]ac=1/\pi (\frac{Klc}{Ys} )^{2}\\ ac=1/\pi(\frac{98.9}{(1)(860/2)} )^{2}\\ ac=0.0168m\\ac=16.8mm[/tex]
Therefore, the critical flaw is subject to detection since this value of ac (16.8 mm) is greater than the 3.0 mm resolution limit.
A 90.0-kg fullback running east with a speed of 5.00 m/s is tackled by a 95.0-kg opponent running north with a speed of 3.00 m/s. (a) Why does the tackle constitute a perfectly inelastic collision? (b) Calculate the velocity of the players immediately after the tackle and (c) determine the mechanical energy that is lost as a result of the collision. (d) Where did the lost energy go?
Answer:
a) Please see below as the answer is self-explanatory.
b) 2.88 m/s
c) 785. 8 J
d) It is expended like thermal energy, due to internal friction.
Explanation:
a) In a tackle, both players keep emmeshed each other, so it is a perfectly inelastic collision; Immediately after the tackle, both masses behave like they were only one.
b) Assuming no external forces act during the collision, total momentum must be conserved.
As momentum is a vector, the conservation principle must be met by all vector components at the same time.
In our case, as the players move in directions mutually perpendicular, we can decompose the momentum vector along both directions, taking into account that after the collision, the momentum vector will have components along both directions.
So, if we call the W-E axis our X-axis (being the direction towards east as the positive one) , and to the S-N axis our Y -axis (being the northward direction the positive one), we can write the following equations:
pₓ₀ = pₓf ⇒ m₁*v₁ = (m₁+m₂)*vf*cosθ
py₀ = pyf ⇒ m₂*v₂ = (m₁+m₂)*vf*sin θ
where θ, is the angle that both players take regarding the x-axis after the collision (north of east).
Replacing by the values, we have the following equations:
vf*cosθ = (90.0 kg*5.00 m/s) / (90.0 kg + 95.0 kg) = 2.43 m/s (1)
vf*sin θ = (95.0 kg* 3.00 m/s) / (90.0 kg + 95.0 kg) = 1.54 m/s (2)
Dividing both sides:
sin θ / cos θ = tan θ = 1.54 / 2.43 = 0.634
⇒ arc tan (0.634) = 32.3º
Replacing in (1) we have:
vf = 2.43 m/s / cos 32.3º = 2.43 m/s / 0.845 = 2.88 m/s
c) As the collision happens in one dimension, all mechanical energy, before and after the collision, is just the kinetic energy of the players.
Before the collision:
K₀ = 1/2*m₁*v₁₀² + 1/2 m₂*v₂₀²
= 1/2*( ( 90.0) kg*(5.0)²(m/s)² + (95.0)kg*(3.0)(m/s)²) = 1,553 J
After the collision:
Kf = 1/2 *(m₁+ 767.2 Jm₂)*vf² = 1/2*185 kg*(2.88)²(m/s)²= 767.2 J
The mechanical energy lost during the collision is just the difference between the final and initial kinetic energy:
ΔK = Kf - K₀ = 767.2 - 1,553 J = -785.8 J
So, the magnitude of the energy lost during the collision is 785.8 J.
d) This energy is lost during the collision as thermal energy, due to the internal friction between both players.
The tackle constitutes a perfectly inelastic collision where the players stick together after the collision, resulting in a loss of kinetic energy. The velocity of the players immediately after the tackle is 2.70 m/s to the east. The mechanical energy lost as a result of the collision is 562.5 J.
Explanation:(a) The tackle constitutes a perfectly inelastic collision because the two players stick together after the collision, resulting in a loss of kinetic energy. In a perfectly inelastic collision, the objects involved stick together and move as a single unit.
(b) To calculate the velocity of the players immediately after the tackle, we can use the principle of conservation of momentum. The total momentum before the collision is equal to the total momentum after the collision. Since the fullback is running east, we can consider the positive direction as east and the negative direction as north. Applying the principle of conservation of momentum in the x-direction, we have:
Total momentum before the collision in the x-direction: (90.0 kg)(5.00 m/s) = 450 kg·m/sTotal momentum after the collision in the x-direction: (90.0 kg + 95.0 kg) * Vx = (185.0 kg) * VxSetting the two equations equal to each other and solving for Vx, we get:
(90.0 kg)(5.00 m/s) = (185.0 kg) * VxVx = 2.70 m/sSo the velocity of the players immediately after the tackle is 2.70 m/s to the east.
(c) The mechanical energy that is lost as a result of the collision can be calculated by subtracting the final kinetic energy from the initial kinetic energy. The initial kinetic energy is given by:
Initial kinetic energy = 0.5 * (90.0 kg) * (5.00 m/s)^2 = 562.5 JSince the players come to rest after the collision, the final kinetic energy is zero. Therefore, the mechanical energy lost is equal to the initial kinetic energy:
Mechanical energy lost = Initial kinetic energy = 562.5 J(d) The lost energy is converted into other forms of energy, such as sound, heat, and deformation of the players and their surroundings.
Learn more about Perfectly inelastic collision here:https://brainly.com/question/24616147
#SPJ12
A grinding wheel is a uniform cylinder with a radius of 7.80 cm and a mass of 0.550 kg.
Part A
Calculate its moment of inertia about its center. Express your answer to three significant figures and include the appropriate units.
Part B
Calculate the applied torque needed to accelerate it from rest to 1750 rpm in 7.40 s .
Take into account a frictional torque that has been measured to slow down the wheel from 1500 rpm to rest in 58.0 s .
Answer:
a. I = 167.31 x 10 ⁻³ kg*m²
b. T = 4.59 kg * m² / s²
Explanation:
The moment of inertia of a uniform cylinder:
a.
r = 7.8 cm * 1 m / 100 cm = 0.078 m
I = ½ * m * r²
I = ½ * 0.55 kg * (0.078²m)
I = 167.31 x 10 ⁻³ kg*m²
b.
T = Iα’ + Iα,
α’ = ω’/t = 1750 rpm * (2π/60) / 7.40s = 24.76 rad/s²
α = ω/t = 1500 rpm * (2π/60) / 58 = 2.71 rad/s²
T = (167.31 x 10⁻³ kg*m²)* (24.76 + 2.71 ) rad / s²
T = 4.59 kg * m² / s²
The moment of inertia of the wheel is calculated as 0.00133 kg*m^2. The second part of the question involves determining the net and frictional torques to find the total applied torque.
Explanation:To solve this problem, we need to apply the formulas of moment of inertia and the angular acceleration along with the concept of frictional torque. The moment of inertia for a cylinder rotating about its axis is given by the formula I = 0.5*m*r^2. In this case, where mass (m) is 0.550 kg and radius (r) is 7.80 cm or 0.078 m (since 1cm = 0.01m).
Part A: I = 0.5 * 0.550 kg * (0.078 m)^2 = 0.00133 kg*m^2.
For Part B, we first need to convert the rotational speed from revolutions per minute (rpm) to rad/s. Then we use these values to determine the angular acceleration and calculate the net torque. The frictional torque is then added to this net torque to find the total applied torque.
Learn more about Rotational Mechanics here:https://brainly.com/question/33791333
#SPJ11
Say that you are in a large room at temperature TC = 300 K. Someone gives you a pot of hot soup at a temperature of TH = 340 K. You set the bowl up so that as it cools to room temperature the heat first flows through a Carnot Engine. The soup has Cv= (33 J/K). Assume that the volume of the soup does not change.
1. What fraction of the total heat QH that is lost by the soup can be turned into useable work by the engine?
Answer:
Explanation:
Heat energy given out by the soup
= C_v x ( t₂ - t₁ )
= 33 x ( 340 - 300)
= 1320 J
This heat is given to Carnot engine . Efficiency of engine
= (340 - 300 ) / 340
= 40 / 340
2 / 17
This fraction of total heat given is converted into useable work by the engine.
When radio waves try to pass through a city, they encounter thin vertical slits: the separations between the buildings. This causes the radio waves to diffract. In this problem, you will see how different wavelengths diffract as they pass through a city and relate this to reception for radios and cell phones. You will use the angle from the center of the central intensity maximum to the first intensity minimum as a measure of the width of the central maximum (where nearly all of the diffracted energy is found).a. Find the angle θ to the first minimum from thecenter of the central maximum (Express your answer in terms λ and a.):b. What is the angle θFM to the first minimum foran FM radio station with a frequency of 101mMHz? (Express your answer numerically indegrees to three significant figures. Note: Do not write youranswer in terms of trignometric functions. Evaluate any suchfunctions in your working.)c. What is the angle θcell for a cellular phonethat uses radiowaves with a frequency of 900MHz? (Express your answer indegrees to three significant figures.)d. What problem do you encounter in tryingto find the angle θAM for an AM radio stationwith frequency 1000kHz?i. The angle becomes zero.ii. The angle can be given only in radians.iii. To find the angle it would be necessary to takethe arcsine of a negative number.iv. To find the angle it would be necessary totake the arcsine of a number greater than one.
Final answer:
The diffraction of radio waves when passing through city buildings can be represented by single-slit diffraction. The angle to the first minimum can be calculated using the equation θ = sin-1(λ/a), but for AM radio with very large wavelengths, this calculation may not be valid as it could require taking the arcsine of a number greater than one.
Explanation:
When radio waves encounter thin vertical slits such as the spaces between buildings, they diffraction occurs. The property of diffraction can be analyzed using the concept of single-slit diffraction from wave optics. For a single-slit diffraction, the angle θ to the first minimum can be found using the equation θ = sin-1(λ/a), where λ is the wavelength of the wave and a is the width of the slit.
For an FM radio station with a frequency of 101 MHz, we would use the relationship between frequency (f), wavelength (λ), and the speed of light (c) to find the wavelength (λ = c/f) before calculating the angle using the aforementioned equation.
Similarly, for a cellular phone using radio waves with a frequency of 900 MHz, we again find the wavelength using the same relation and then calculate the angle θ to the first minimum.
However, for AM radio, the complication arises because the wavelengths for AM radio are considerably larger. This can lead to a scenario where the slit width is not narrow enough compared to the wavelength, and as a result, the angle θAM calculated using sin-1(λ/a) may result in taking the arcsine of a number greater than one, which is not possible and indicates that the first minimum may not occur.
A horse running at 3 m/s speeds up with a constant acceleration of 5 m/s2. How fast is the
horse going when it travels 15.3 m from where it started to accelerate.
Answer:
The horse is going at 12.72 m/s speed.
Explanation:
The initial speed of the horse (u) = 3 m/s
The acceleration of the horse (a)= 5 m/[tex]s^{2}[/tex]
The displacement( it is assumed it is moving in a straight line)(s)= 15.3 m
Applying the second equation of motion to find out the time,
[tex]s=ut+\frac{1}{2}at^{2}[/tex]
[tex]15.3=3t+2.5t^{2}[/tex]
[tex]2.5t^{2}+3t-15.3=0[/tex]
Solving this quadratic equation, we get time(t)=1.945 s, the other negative time is neglected.
Now applying first equation of motion, to find out the final velocity,
[tex]v=u+at[/tex]
[tex]v=3+1.945*5[/tex]
[tex]v=3+9.72[/tex]
v=12.72 m/s
The horse travels at a speed of 12.72 m/s after covering the given distance.
A 44.5 mA current is carried by a uniformly wound air-core solenoid with 500 turns, a 18.5 mm diameter, and 14.0 cm length. (a) Compute the magnetic field inside the solenoid. µT (b) Compute the magnetic flux through each turn. T·m2 (c) Compute the inductance of the solenoid. mH (d) Which of these quantities depends on the current? (Select all that apply.)
Answer:
a. Magnetic Field =1.997×[tex]10^{-4}[/tex] T
b. Area= 2.68×[tex]10^{-4}[/tex][tex]m^{2}[/tex]
Magnetic Flux= 5.367×[tex]10^{-8}[/tex]T[tex]m^{2}[/tex]
c. Inductance= 6.013×[tex]10^{-4}[/tex]H
Explanation:
Parameters from the question
I= 44.5×[tex]10^{-3}[/tex]A
N=500 turns
Diameter=18.5mm
Radius = (diameter/2) = 9.25mm =9.25×[tex]10^{-3}[/tex]m
L= 14cm = 0.14m
Permitivity [tex]U_{o}[/tex]=4π×[tex]10^{-7}[/tex]H/m
The Formulars Used are
B(Magnetic Field) =[tex]\frac{U_{o}. N. I }{l}[/tex]
Mag Flux= B.A
Inductance= [tex]\frac{U_{o}.N^{2} .A }{l}[/tex]
Answer:
a) 199.716 μT
b) [tex]5.368 * 10^{-8}[/tex] T·m^2
c) 0.603 mH
d) B and Ф
Explanation:
I am giving the explanation with my handwritten solution in the paper.
Check the attachment please.
A wooden artifact is found in an ancient tomb. Its 14C activity is measured to be 66.3% of that in a fresh sample of wood from the same region. Assuming the same amount of 14C was initially presented in the wood from which the artifact was made, determine the age of the artifact. The half-life of 14C is 5730 y. Answer in units of y.
Answer:
3396.53 years
Explanation:
Using decay formula
In([tex]\frac{N}{No}[/tex]) = -Kt where t is the age of the artifact in years and k is the decay constant
T1/2 = [tex]\frac{In2}{K}[/tex]
5730 = [tex]\frac{In2}{K}[/tex]
K = In 2 / 5730= 0.000121yr^-1
N / No = 0.663
In (0.663) / -0.000121 = t
t = 3396.53 years
Cold water (cp = 4180 J/kg·K) leading to a shower enters a thinwalled double-pipe counterflow heat exchanger at 15°C at a rate of 1.25 kg/s and is heated to 60°C by hot water (cp = 4190 J/kg·K) that enters at 100°C at a rate of 4 kg/s. If the overall heat transfer coefficient is 880 W/m2 ·K, determine the rate of heat transfer and the heat transfer surface area of the heat exchanger.
Answer:
the rate of heat transfer Q is Q =235.125 kJ/s
the heat transfer surface area A of the heat exchanger is A= 15.30 m²
Explanation:
Assuming negligible loss to the environment, then the heat flow of the hot water goes entirely to the cold water
Denoting a as cold water and b as hot water , then
Q= Fᵃ* cpᵃ * ( T₂ᵃ - T₁ᵃ)
where
F= mass flow
cp = specific heat capacity at constant pressure
T₂= final temperature
T₁ = initial temperature
replacing values
Q = Fᵃ* cᵃ * ( T₂ᵃ - T₁ᵃ) = 1.25 kg/s* 4180 J/kg·K* ( 60°C-15°C) * 1 kJ/1000J= 235.125 kJ/s
if all there is no loss to the surroundings
Qᵃ + Qᵇ = Q surroundings = 0
Fᵃ* cpᵃ * ( T₂ᵃ - T₁ᵃ) + Fᵇ* cpᵇ * ( T₂ᵇ - T₁ᵇ) = 0
T₂ᵇ = T₁ᵇ - [Fᵃ* cpᵃ / (Fᵇ* cpᵇ) ]* ( T₂ᵃ - T₁ᵃ)
replacing values
T₂ᵇ =100°C - [1.25 kg/s* 4180 J/kg·K/ (4 kg/s* 4190 J/kg·K)]* ( 60°C-15°C)
T₂ᵇ = 85.97 °C
the heat transfer surface of the heat exchanger is calculated through
Q = U*A* ΔTlm
where
U= overall heat transfer coefficient
A = heat transfer area of the heat exchanger
ΔTlm = (ΔTend - ΔTbeg)/ ln ( ΔTend - ΔTbeg)
ΔTbeg = temperature difference between the 2 streams at the inlet of the heat exchanger ( hot out - cold in) = 85.97 °C - 15°C = 70.97 °C
ΔTbeg = temperature difference between the 2 streams at the end of the heat exchanger ( hot in - cold out ) = 100°C - 60 °C = 40°C
then
ΔTlm = (ΔTend - ΔTbeg)/ ln ( ΔTend - ΔTbeg) =( 70.97 °C- 40°C)/ ln( 70.97°C/40°C) = 17.455 °C
ΔTlm = 17.455 °C
then
Q = U*A* ΔTlm
A = Q/(U*ΔTlm) = 235.125 kJ/s/(17.455 °C *880 W/m²*K) *1000 J/kJ = 15.30 m²
A= 15.30 m²
Final answer:
Calculate the heat transfer rate and heat transfer surface area in a double-pipe counterflow heat exchanger using given water properties and overall heat transfer coefficient.
Explanation:
Cold Water: mw = 1.25 kg/s, cp = 4180 J/kg·K, Tin = 15°C, Tout = 60°C
Hot Water: mh = 4 kg/s, cp = 4190 J/kg·K, Tin = 100°C, Tout = ?
Overall Heat Transfer: U = 880 W/m²·K
Calculate Heat Transfer Rate:
Calculate Q using Q = mcΔT for each water type.Calculate ∆T using Tin and Tout values.Use the overall heat transfer coefficient equation: Q = U × A × ∆Tlm.Solve for A, the heat transfer surface area.A ≈ 1m²
So, the rate of heat transfer is approximately 55341.28 W and the heat transfer surface area of the heat exchanger is approximately 1 m².
A cylinder, which is in a horizontal position, contains an unknown noble gas at 4.00 × 10 4 Pa 4.00×104 Pa and is sealed with a massless piston. The piston is slowly, isobarically moved inward 16.3 cm, 16.3 cm, which removes 1.50 × 10 4 J 1.50×104 J of heat from the gas. If the piston has a radius of 30.5 cm, 30.5 cm, calculate the change in the internal energy of the system Δ U ΔU .
Answer:
-13094.55179 J
Explanation:
Q = Heat = [tex]-1.5\times 10^{4}\ J[/tex]
P = Pressure = [tex]4\times 10^4\ Pa[/tex]
[tex]\Delta V[/tex] = Change in volume = [tex]\pi r^2\times -h[/tex](negative because it is decreasing)
h = Height = 16.3 cm
r = Radius = 30.5 cm
Entropy is given by
[tex]\Delta U=Q-W[/tex]
Work done is given by
[tex]W=P\Delta V\\\Rightarrow W=4\times 10^4\times (\pi 0.305^2\times -0.163)[/tex]
[tex]\Delta U=-1.5\times 10^{4}-(4\times 10^4\times (\pi 0.305^2\times -0.163))\\\Rightarrow \Delta U=-13094.55179\ J[/tex]
The change in the internal energy of the system is -13094.55179 J
The period of a sinusoidal source is the time required for the sinusoid to pass through all of its possible values. We use the symbol T to represent the period of a sinusoid. The period and the frequency are inversely related. A sinusoidal source described by the function cos(ωt) has a frequency of ω radians/second, or a frequency f=ω/2π Hz. The units hertz represents the number of cycles per second. Since the period is the number of seconds per cycle, the period is the inverse of the frequency in hertz: T=1f Substituting the frequency in radians/second, ω, for the frequency in Hz gives us another way to calculate the period: T=2πω What is the period of the voltage source described as v(t)=50cos(2000t−45∘) mV? Express your answer to two digits after the decimal point and include the appropriate units.
Answer:
T=0.0031secs
Explanation:
The voltage expression [tex]v(t)=50cos(2000t-45^{0})[/tex] can be represented as
[tex]v(t)=v_{m}cos(wt-\alpha ) \\[/tex]
comparing the two equations we can conclude that the angular frequency
[tex]w=2000[/tex]
from the question, since the frequency,f which is express as
[tex]f=\frac{w}{2\pi }\\[/tex],
Hence [tex]f=\frac{2000}{2\pi } \\f=\frac{2000}{2*3.14 } \\f=318.471Hz\\[/tex].
The period which is the inverse of the frequency can be express as
[tex]T=\frac{1}{f} \\T=\frac{1}{314.471}\\ T=0.00314\\T=0.0031secs[/tex]
What is the difference between the states of phase equilibrium and metastability?
Answer:
The main difference is that the metastable state is not a state of equilibrium, but a state of non-equilibrium that is maintained for a long time. A metastable state is when the system approaches equilibrium in a very slow manner.
And on the other hand the phase equilibrium as the name says is a state of equilibrium in which there are more than two phases coexisting.
The state of phase is description about the substance existing in equilibrium and metastability is non-equilibrium state of substance.
The given problem is based on the major difference between the states of phase of equilibrium and the metastability. These two are the concepts of chemical equilibrium, when there is subsequent change in the phase of one substance, with respect to the other substance.
The metastable state is not a state of equilibrium, but a state of non-equilibrium that is maintained for a long time. A metastable state is when the system approaches equilibrium in a very slow manner.And on the other hand the phase equilibrium as the name says is a state of equilibrium in which there are more than two phases coexisting.
Thus, we can conclude that the state of phase is description about the substance existing in equilibrium and metastability is non-equilibrium state of substance.
Learn more about the chemical equilibrium here:
https://brainly.com/question/2761897
In a lab experiment, a student is trying to apply the conservation of momentum. Two identical balls, each with a mass of 1.0 kg, roll toward each other and collide. The velocity is measured before and after each collision. The collected data is shown below. A 5 column table with 3 rows. The first column is unlabeled with entries Trial 1, Trial 2, Trial 3, Trial 4. The second column is labeled Initial Velocity Ball A (meters per second) with entries positive 1, positive 0.5, positive 2, positive 0.5. The third column is labeled Initial Velocity Ball B (meters per second) with entries negative 2, negative 1.5, positive 1, negative 1. The third column is labeled Final Velocity Ball A (meters per second) with entries negative 2, negative 0.5, positive 1, positive 1.5. The fourth column is labeled Final Velocity Ball B (meters per second) with entries negative 1, negative 0.5, negative 2, negative 1.5. Which trial shows the conservation of momentum in a closed system? Trial 1 Trial 2 Trial 3 Trial 4
Answer:
Second Trial satisfy principle of conservation of momentum
Explanation:
Given mass of ball A and ball B [tex]=\ 1.0\ Kg.[/tex]
Let mass of ball [tex]A[/tex] and [tex]B\ is\ m[/tex]
Final velocity of ball [tex]A\ is\ v_1[/tex]
Final velocity of ball [tex]B\ is\ v_2[/tex]
initial velocity of ball [tex]A\ is\ u_1[/tex]
Initial velocity of ball [tex]B\ is\ u_2[/tex]
Momentum after collision [tex]=mv_1+mv_2[/tex]
Momentum before collision [tex]= mu_1+mu_2[/tex]
Conservation of momentum in a closed system states that, moment before collision should be equal to moment after collision.
Now, [tex]mu_1+mu_2=mv_1+mv_2[/tex]
Plugging each trial in this equation we get,
First Trial
[tex]mu_1+mu_2=mv_1+mv_2\\1(1)+1(-2)=1(-2)+1(-1)\\1-2=-2-1\\-1=-3[/tex]
momentum before collision [tex]\neq[/tex] moment after collision
Second Trial
[tex]mu_1+mu_2=mv_1+mv_2\\1(.5)+1(-1.5)=1(-.5)+1(-.5)\\.5-1.5=-.5-.5\\-1=-1[/tex]
moment before collision [tex]=[/tex] moment after collision
Third Trial
[tex]mu_1+mu_2=mv_1+mv_2\\1(2)+1(1)=1(1)+1(-2)\\2+1=1-2\\3=-1[/tex]
momentum before collision [tex]\neq[/tex] moment after collision
Fourth Trial
[tex]mu_1+mu_2=mv_1+mv_2\\1(.5)+1(-1)=1(1.5)+1(-1.5)\\.5-1=1.5-1.5\\-.5=0[/tex]
momentum before collision [tex]\neq[/tex] moment after collision
We can see only Trial- 2 shows the conservation of momentum in a closed system.
Answer: Trial 2
Explanation:
Select the statement that correctly completes the description of phase difference.
Phase difference describes:
O the difference in the phase angle between any two waves at any given position along the waves.
O the shift between the positions of corresponding crests of two waves of the same frequency.
O the difference in the frequencies of two waves at a given time.
O the displacement of a wave particle from its undisturbed position at the origin.
Phase difference denotes the difference in phase angle between two waves at a given point, occurring when waves are separated by a whole number of multiples of wavelengths.
Explanation:Phase difference describes the difference in the phase angle between any two waves at any given position along the waves. When the waves have the same frequency and the difference in their path lengths is an integer multiple of the wavelength, the waves are said to be in phase. This means these points are separated by a whole number multiple of whole wave cycles or wavelengths. For example, sound waves can illustrate a phase shift when they have different path lengths. It is also important to understand that the wavelength is defined as the distance between any two adjacent points that are in phase.
The mean diameters of Mars and Earth are 6.9 x 10^3 km and 1.3 x 10^4 km, respectively. The mass of Mars is 0.11 times Earth’s mass.
a) What is the ratio of the mean density (mass per unit volume) of Mars to that of Earth?
b) What is the value of the gravitational acceleration on Mars?
c) What is the escape speed on Mars?
Final answer:
a) The ratio of the mean density of Mars to that of Earth is 0.11 times the ratio of the volume of Earth to the volume of Mars. b) The value of the gravitational acceleration on Mars is 3.7 m/s². c) The escape speed on Mars is 5.03 km/s.
Explanation:
a) To find the ratio of the mean density of Mars to that of Earth, we need to divide the mass of Mars by the volume of Mars and divide the mass of Earth by the volume of Earth. The mean density is given by:
Mean density (Mars) = mass (Mars) / volume (Mars)
Mean density (Earth) = mass (Earth) / volume (Earth)
Substituting the given values, we have:
Mean density (Mars) = (0.11 x mass (Earth)) / volume (Mars)
Mean density (Earth) = mass (Earth) / volume (Earth)
Dividing these two equations, we get the ratio of the mean densities as:
Ratio of mean density (Mars to Earth) = (0.11 x mass (Earth)) / volume (Mars) / (mass (Earth) / volume (Earth))
Simplifying, the ratio of mean densities is 0.11 times the ratio of the volume of Earth to the volume of Mars.
b) The value of the gravitational acceleration on Mars can be found using Newton's law of gravitation. The formula for gravitational acceleration is:
Gravitational acceleration = (Gravitational constant * mass of Mars) / radius of Mars^2
Substituting the given values, we have:
Gravitational acceleration on Mars = (6.67 x 10^-11 N m^2/kg^2 * 6.418 x 10^23 kg) / (3.38 x 10^6 m)^2 = 3.7 m/s^2
c) The escape speed on Mars can be found using the formula:
Escape speed = sqrt(2 x Gravitational constant x mass of Mars / radius of Mars)
Substituting the given values, we have:
Escape speed on Mars = sqrt(2 x 6.67 x 10^-11 N m^2/kg^2 x 6.418 x 10^23 kg / 3.38 x 106 m) = 5.03 km/s
Air is compressed adiabatically in a piston-cylinder assembly from 1 bar, 300 K to 10 bar, 600 K. The air can be modeled as an ideal gas and kinetic and potential energy effects are negligible. Determine the amount of entropy produced, in kJ/K per kg of air, for the compression. What is the minimum theoretical work input, in kJ per kg of air, for an adiabatic compression from the given initial state to a final pressure of 10 bar?
Final answer:
The entropy production for a reversible adiabatic process of an ideal gas is zero. For the actual work input required for adiabatic compression, the formula involving pressures, volumes, and the heat capacity ratio is used, but cannot be calculated without additional information such as the specific volumes.
Explanation:
To determine the amount of entropy produced during an adiabatic compression of air modeled as an ideal gas, we need to recognize that, by definition, an adiabatic process is one in which no heat is transferred to or from the gas. Therefore, assuming the process is also reversible (which it must be, if we are to calculate a non-zero entropy production), the change in entropy (ΔS) for the process would actually be zero. However, as the conditions stated a rise in temperature during the compression, if any irreversibility were present in the real-world scenario, it would indeed generate entropy, but we need more information to calculate the precise amount for a real-world irreversible process.
The minimum theoretical work input for an adiabatic compression can be calculated using the first law of thermodynamics and the relation for adiabatic processes defined as PV^{γ} = constant, where γ (gamma) is the heat capacity ratio (Cp/Cv). For an ideal gas, the work done (W) on the air during adiabatic compression can be expressed using the formula W = (P2*V2 - P1*V1) / (γ - 1), where P1 and V1 are the initial pressure and volume, and P2 and V2 are the final pressure and volume, respectively. However, since the volume is not given in the question, this calculation cannot be completed without further information.
The entropy produced per kg of air during the adiabatic compression is approximately [tex]\( 0.0348 \)[/tex] kJ/K, and the minimum theoretical work input for the compression is approximately [tex]\( 215.25 \)[/tex] kJ/kg of air.
The amount of entropy produced during the adiabatic compression process in a piston-cylinder assembly, where air is modeled as an ideal gas, can be determined using the following relationship for an adiabatic process:
[tex]\[ s_2 - s_1 = c_p \ln\left(\frac{T_2}{T_1}\right) - R \ln\left(\frac{P_2}{P_1}\right) \][/tex]
where [tex]\( s \)[/tex] is the specific entropy, [tex]\( c_p \)[/tex] is the specific heat at constant pressure, [tex]\( T \)[/tex] is the absolute temperature, [tex]\( R \)[/tex] is the specific gas constant, and [tex]\( P \)[/tex] is the absolute pressure. The subscripts [tex]\( 1 \) and \( 2 \)[/tex] denote the initial and final states, respectively.
Given:
- Initial state: [tex]\( P_1 = 1 \) bar, \( T_1 = 300 \)[/tex] K
- Final state: [tex]\( P_2 = 10 \) bar, \( T_2 = 600 \)[/tex] K
- For air, [tex]\( c_p = 1.005 \) kJ/kg\K and \( R = 0.287 \) kJ/kg[/tex]
First, convert the pressures from bar to Pa (since the gas constant [tex]\( R \)[/tex] is in terms of Pa):
- [tex]\( P_1 = 1 \times 10^5 \) Pa[/tex]
- [tex]\( P_2 = 10 \times 10^5 \) Pa[/tex]
Now, calculate the entropy change:
[tex]\[ s_2 - s_1 = 1.005 \ln\left(\frac{600}{300}\right) - 0.287 \ln\left(\frac{10 \times 10^5}{1 \times 10^5}\right) \][/tex]
[tex]\[ s_2 - s_1 = 1.005 \ln(2) - 0.287 \ln(10) \][/tex]
[tex]\[ s_2 - s_1 = 1.005 \times 0.693 - 0.287 \times 2.303 \][/tex]
[tex]\[ s_2 - s_1 \approx 0.6965 - 0.6617 \][/tex]
[tex]\[ s_2 - s_1 \approx 0.0348 \text{ kJ/kg\K} \][/tex]
For the minimum theoretical work input during an adiabatic compression, we use the following equation for an ideal gas:
[tex]\[ w_{\text{in,min}} = \int_{V_1}^{V_2} P \, dV \][/tex]
For an adiabatic process, [tex]\( PV^\gamma = \text{constant} \), where \( \gamma \)[/tex] is the heat capacity ratio ([tex]\( c_p/c_v \)[/tex]). The work input can be calculated as:
[tex]\[ w_{\text{in,min}} = \frac{P_2V_2 - P_1V_1}{\gamma - 1} \][/tex]
Using the ideal gas law, [tex]\( PV = mRT \)[/tex], where [tex]\( m \)[/tex] is the mass of the gas, we can express [tex]\( V \)[/tex] in terms of [tex]\( P \) and \( T \)[/tex]:
[tex]\[ V = \frac{mRT}{P} \][/tex]
Since the mass [tex]\( m \)[/tex] cancels out, we can write:
[tex]\[ w_{\text{in,min}} = \frac{mRT_2 - mRT_1}{\gamma - 1} \][/tex]
[tex]\[ w_{\text{in,min}} = \frac{R(T_2 - T_1)}{\gamma - 1} \][/tex]
Given that [tex]\( \gamma = \frac{c_p}{c_v} = \frac{c_p}{c_p - R} \)[/tex], we can calculate \( \gamma \) for air:
[tex]\[ \gamma = \frac{1.005}{1.005 - 0.287} \approx 1.4 \][/tex]
Now, calculate the minimum work input:
[tex]\[ w_{\text{in,min}} = \frac{0.287(600 - 300)}{1.4 - 1} \][/tex]
[tex]\[ w_{\text{in,min}} = \frac{0.287 \times 300}{0.4} \][/tex]
[tex]\[ w_{\text{in,min}} = \frac{86.1}{0.4} \][/tex]
[tex]\[ w_{\text{in,min}} \approx 215.25 \text{ kJ/kg} \][/tex]
What is the difference between transverse and longitudinal waves?
a. Only longitudinal waves transmit matter.
b. Plane waves are transverse waves while spherical waves are longitudinal.
c. Only transverse waves transmit energy.
d. In transverse waves the displacement is perpendicular to the direction of propagation of the wave, while in longitudinal waves the displacement is parallel to the direction of propagation.
e. Mechanical waves are transverse waves while electromagnetic waves are longitudinal.
To explain how transverse and longitudinal waves work, let us give two examples for each particular case.
In the case of transverse waves, the displacement of the medium is PERPENDICULAR to the direction of the wave. One way to visualize this effect is when you have a rope and between two people the rope is shaken horizontally. The shift is done from top to bottom. This phenomenon is common to see it in solids but rarely in liquids and gases. A common application usually occurs in electromagnetic radiation.
On the other hand in the longitudinal waves the displacement of the medium is PARALLEL to the direction of propagation of the wave. A clear example of this phenomenon is when a Slinky is pushed along a table where each of the rings will also move. From practice, sound waves enclose the definition of longitudinal wave displacement.
Therefore the correct answer is:
C. In transverse waves the displacement is perpendicular to the direction of propagation of the wave, while in longitudinal waves the displacement is parallel to the direction of propagation.
Transverse waves have a perpendicular disturbance while longitudinal waves have a parallel disturbance.
Explanation:A transverse wave has a disturbance perpendicular to its direction of propagation, whereas a longitudinal wave has a disturbance parallel to its direction of propagation. For example, when you ripple a string up and down, you create a transverse wave. But when you push and pull a slinky back and forth, you create a longitudinal wave.
Giraffe bending to drink. In a giraffe with its head 1.83 m above its heart, and its heart 2.04 m above its feet, the(hydrostatic) gauge pressure in the blood at its heart is 246 torr. Assume that the giraffe stands upright and the blood density is 1.06 × 103 kg/m3. In torr (or mm Hg), find the (gauge) blood pressure.
(a) at the brain (the pressure is enough to perfuse the brain with blood, to keep the giraffe from fainting)
(b) at the feet (the pressure must be countered by tight-fitting skin acting like a pressure stocking).
(c) If the giraffe were to lower its head to drink from a pond without splaying its legs and moving slowly, what would be the increase in the blood pressure in the brain? (Such action would probably be lethal.)
Answer:
1) Pm₂ = 1.9 10⁴ Pa , b) P_feet = 5.4 10⁴ Pa , c) Pm₄ = 4.4 10⁴ Pa
Explanation:
a) Pressure can be found using Bernoulli's equation
P₁ + ½ rho v₁² + rho g y₁ = P₂ + ½ rho v₂² + rgo g y₂
The amount of blood that runs through the constant system, all the blood that reaches the brain leaves it, so we can assume that the speed of entry and exit of the total blood is the same. In this case the equation is
P₁-P₂ = rgo h (y₂-y₁)
The gauge pressure is
Pm = P₁ -P₂
Pm₂ = 1.06 10³ 9.8 1.83
Pm₂ = 19 10³ Pa
Pm₂ = 1.9 10⁴ Pa
The pressure in the heart is
Pm₁ = 246 torr (1,013 10⁵ Pa / 760 torr) = 3,279 10⁴ Pa
Therefore the gauge pressure is an order of magnitude less
Total or absolute pressure is
Pm₂ = P_heart - P_brain
P_brain = P_heart - Pm₂
P brain = 3,279 10⁴ - 1.9 10⁴
P brain = 1.4 104 Pa
b) on the feet
Pm₃ = rho g y₃
y = 2.04 m
Pm₃ = 1.06 10³ 9.8 2.04
Pm₃ = 21 10³ Pa
Pm₃ = 2.1 10⁴ Pa
Total pressure
Pm₃ = P_feet + P_heart
P_feet = Pm₃ + P_heart
P_feet = 3,279 10⁴ + 2.1 10⁴
P_feet = 5.4 10⁴ Pa
c) If you lower your head the height change is
h = 1.83 +2.04
h = 4.23 m
Pm₄ = 1.06 10³ 9.8 4.23
Pm₄ = 4.4 10⁴ Pa
If the coefficient of static friction between tires and pavement is 0.60, calculate the minimum torque that must be applied to the 69-cm-diameter tire of a 920-kg automobile in order to "lay rubber" (make the wheels spin, slipping as the car accelerates). Assume each wheel supports an equal share of the weight.
To solve this problem, it is necessary to apply the definitions and concepts related to Newton's second law, which relate the variables of the Normal Force, Weight, friction force and finally the Torque.
We start under the definition that the Normal Force of one of the 4 tires of the car would be subject to
[tex]N = \frac{mg}{4}[/tex]
Where,
m = mass
g = Gravitational Acceleration
Therefore the Normal Force of each wheel would be
[tex]N = \frac{920*9.8}{4}[/tex]
[tex]N = 2254N[/tex]
Now the friction force can be determined as
[tex]f_s = \mu_s N[/tex]
[tex]f_s = 0.60 * 2254[/tex]
[tex]f_s = 1352.4N[/tex]
The radius of each of the tires is given as
[tex]r = \frac{69}{2}[/tex]
[tex]r = 34.5cm = 0.345m[/tex]
Finally, the torque is made between the friction force (which is to be overcome) and the radius of each of the wheels, therefore:
[tex]\tau = r*f_s[/tex]
[tex]\tau = (0.345)(1352.4)[/tex]
[tex]\tau = 466.578N\cdot m[/tex]
Therefore the engine of the car must apply a torque of about [tex]466.578N\cdot m[/tex] to lay rubber
To calculate the minimum torque needed to make the wheels spin on a car, we must first understand the concept of static friction. The force of static friction (Fs) that must be overcome to cause slipping is given by
Fs = μsN
where μs is the coefficient of static friction and N is the normal force. In this case, the weight of the car (W) is evenly distributed on all four tires, so each tire supports a quarter of the weight, W/4. The normal force N for one tire would then be W/4.
Since the weight W of the car is the mass (m) times the acceleration due to gravity (g), we have:
N = W/4 = mg/4.
Substituting the given values, we find
N = (920 kg * 9.81 m/s2)/4.
Using the coefficient of static friction (μs = 0.60), the static frictional force Fs for one tire is
Fs = 0.60 * N.
To find the torque (τ), we use the relation
τ = Fsr
where r is the radius of the tire.
The radius is half the diameter, so r = 69 cm / 2 or 0.345 m. Thus, the minimum torque is
τ = Fs * 0.345 m.
Calculating N, we get
N = (920 kg * 9.81 m/s2)/4
N = 2251.05 N
so Fs = 0.60 * 2251.05 N
Fs = 1350.63 N.
Therefore, the minimum torque τ is 1350.63 N * 0.345 m = 465.97 Nm.
The intensity level of a power mower at a distance of 1.0 m is 100 dB. You wake up one morning to find that four of your neighbors are mowing their lawn 20 m from your open bedroom window. What is the intensity level in your bedroom? The intensity level of a power mower at a distance of 1.0 m is 100 dB. You wake up one morning to find that four of your neighbors are mowing their lawn 20 m from your open bedroom window. What is the intensity level in your bedroom?
A. 50 dB
B. 400 dB
C. 104 dB
D. 80 dB
E. 40 dB
Answer:
β₂ = 74 dB, The answer is D which is the closest
Explanation:
The definition and intensity is the power per unit area
I = P / A
P = I A
The emitted power is constant whereby the energy is distributed over the surface of a sphere
A = 4π R²
We can also write it in two points
P = I₁ A₁ = I₂ A₂
I₁ / I₂ = A₂ / A₁
I₁ / I₂ = 4π R₂² / 4π R₁²
I₁ / I₂ = R₂² / R₁²
The definition of decibels is
β = 10 log (I / I₀)
Let's write this equation for the two given points
m = 1m
β₁ = 10 log (I₁ / I₀)
m = 20m
β₂ = 10 log (I₂ / I₀)
Let's eliminate I₀
β₁ - β₂ = 10 log (I₁ / I₀) - 10 log (I₂ / I₀) = 10 (log (I₁ / I₀) –log (I₂ / I₀))
β₁ - β₂ = 10 log (I₁ / I₂)
β₁ - β₂ = 10 log (R₂² / R₁²)
Let's calculate
100 –β₂ = 10 log (20²/1²)
β₂ = 100 - 10 log 400
β₂ = 100 - 26.0
β₂ = 74 dB
The answer is D which is the closest
The intensity level in the bedroom is approximately 74 dB.
Explanation:The intensity level of sound decreases as the distance from the source increases. With each doubling of distance, the sound intensity decreases by 6 dB. In this case, the sound mowers are at a distance of 20 m from your bedroom window, which is 20 times the distance of 1.0 m where the intensity level is 100 dB. Therefore, the intensity level in your bedroom would be 100 dB - (6 dB x log2(20)) = 100 dB - 6 dB x 4.32 = 100 dB - 25.92 dB ≈ 74 dB.
Learn more about Intensity level of sound here:https://brainly.com/question/30101270
#SPJ12
While at the county fair, you decide to ride the Ferris wheel. Having eaten too many candy apples and elephant ears, you find the motion somewhat unpleasant. To take your mind off your stomach, you wonder about the motion of the ride. You estimate the radius of the big wheel to be 17m , and you use your watch to find that each loop around takes 26sWhat is your speed?Express your answer to two significant figures and include the appropriate units.What is the magnitude of your acceleration?Express your answer to two significant figures and include the appropriate units.What is the ratio of your weight at the top of the ride to your weight while standing on the ground?Express your answer using two significant figures.
Answer:
Case Study: General Andrew Jackson: Andrew Jackson's military career spanned several wars including the American Revolution, the Creek War, the War of 1812, and the Case Study: General Andrew Jackson: Andrew Jackson's military career spanned several wars including the American Revolution, the Creek War, the War of 1812, and the First Seminole War. After the Creek War, Jackson and the Creek Indians signed the
Explanation:
Case Study: General Andrew Jackson: Andrew Jackson's military career spanned several wars including the American Revolution, the Creek War, the War of 1812, and the First Seminole War. After the Creek War, Jackson and the Creek Indians signed the
Case Study: General Andrew Jackson: Andrew Jackson's military career spanned several wars including the American Revolution, the Creek War, the War of 1812, and the First Seminole War. After the Creek War, Jackson and the Creek Indians signed theCase Study: General Andrew Jackson: Andrew Jackson's military career spanned several wars including the American Revolution, the Creek War, the War of 1812, and the First Seminole War. After the Creek War, Jackson and the Creek Indians signed the
The St. Louis Arch has a height of 192 m. Suppose that a stunt woman of mass 84 kg jumps off the top of the arch with an elastic band attached to her feet. She reaches the ground at zero speed. The acceleration of gravity is 9.81 m/s 2 . Find her kinetic energy after 2.6 s of the flight. Assume the elastic band has no length and obeys Hooke’s Law. Answer in units of kJ
Final answer:
The kinetic energy of the stunt woman after 2.6 s of flight is 27578.835 kJ.
Explanation:
To find the kinetic energy of the stunt woman after 2.6 s of flight, we can use the formula for kinetic energy:
KE = 0.5 mv^2
where KE is the kinetic energy, m is the mass, and v is the velocity.
First, let's find the velocity of the stunt woman after 2.6 s of flight. We can use the equation:
v = u + at
where v is the final velocity, u is the initial velocity (0 m/s), a is the acceleration due to gravity (-9.81 m/s^2), and t is the time (2.6 s).
Substituting the values, we get:
v = 0 + (-9.81) * 2.6
v = -25.446 m/s
Since the stunt woman reaches the ground at zero speed, her final velocity is 0 m/s. Therefore, her velocity is -25.446 m/s after 2.6 s of flight.
Now, let's plug the values of mass (84 kg) and velocity (-25.446 m/s) into the formula for kinetic energy:
KE = 0.5 * 84 * (-25.446)^2
KE = 0.5 * 84 * 650.701716
KE = 27578.835 kJ
Therefore, the stunt woman's kinetic energy after 2.6 s of flight is 27578.835 kJ.
A large grinding wheel in the shape of a solid cylinder of radius 0.330 m is free to rotate on a frictionless, vertical axle. A constant tangential force of 210 N applied to its edge causes the wheel to have an angular acceleration of 0.932 rad/s2. What is the moment of inertia of the wheel? (Pick the answer closest to the true value.)A. 27.3 kg m2B. 42.4 kg m2C. 54.9 kg m2D. 74.4 kg m2E. 98.5 kg m2
Answer:
Moment of inertia will be [tex]I=74.356kgm^2[/tex]
So option (d) will be the correct answer
Explanation:
We have given radius of solid cylinder r = 0.330 m
Constant tangential force F = 210 N
Angular acceleration [tex]\alpha =0.932rad/sec^2[/tex]
We know that torque [tex]\tau =Fr=210\times 0.330=69.3Nm[/tex]
We also know that torque is given by [tex]\tau =I\alpha[/tex]
So [tex]69.3=I\times 0.932[/tex]
[tex]I=74.356kgm^2[/tex]
So option (d) will be the correct answer
The SI unit of power is the watt. Which of the following units are equivalent to the watt?
A) V∙AB) J/CC) C/sD) V/sE) A/s
Answer:
The right option is (A) V.A
Explanation:
Power: This is the rate at which work is done. Or it is the produce of force and velocity. The S.I unit of power is Watt (W). Other units include Horse power(hp), foot-pound per minutes, etc.
Generally, power can be represented as,
Power = Energy/time
P = W/t......................... Equation 1
Where p = power, w = Work or energy, t = time in seconds.
Electrical energy: This is the product of potential difference and the quantity of charge.
∴ W = VQ............................... Equation 2
Where V = potential difference, Q = quantity of charge and W = Energy or Work done.
Also Q = It........................ Equation 3.
where I = current in ampere, t = time in seconds
Substituting equation 3 into equation 3
W = VIt............................ Equation 4.
Also substituting Equation 4 into Equation 1
P = VIt/t = VI = voltage(V)×Current(A)
Therefore the equivalent unit of power is
P = V.A.
The right option is (A) V.A
The SI unit of power is the watt. The options A) V∙A, B) J/C, and C) C/s are equivalent to a watt.
Explanation:The SI unit of power is indeed the watt, represented by the symbol 'W'. The watt is a derived unit of power in the International System of Units (SI) and is defined as one joule per second. Hence, three of the given options, A) V∙A, B) J/C, and C) C/s are equivalent to a watt.
A) A Volt (V) times an Ampere (A) also equals a watt (V∙A=W). This is derived from the formula P=V∙I where P is power, V is voltage, and I is current. B) A Joule (J) per Coulomb (C) is also a watt (J/C = W). This comes from the relationship P=W/t = J/s = V∙A. C) A Coulomb (C) per second is also a watt (C/s = W), because one ampere equals to 1 C/s. The unit Coulomb per second refers to the electrical current where 1 A is equivalent to 1 C/s.Learn more about Watt here:https://brainly.com/question/27355276
#SPJ6
The capacity of a storage battery, such as those used in automobile electrical systems, is rated in ampere-hours (A?h). A 50 A?h battery can supply a current of 50 Afor 1.0 h, or 25 A for 2.0 h, and so on.A) What total energy can be supplied by a 13V , 60A?h battery if its internal resistance is negligible?Answer= ...... JB) What volume (in liters) of gasoline has a total heat of combustion equal to the energy obtained in part (a)? (See Section 17.6; the density of gasoline is 90 kg/m 3.)Answer= ........ LC) If a generator with an average electrical power output of 0.45 kW is connected to the battery, how much time will be required for it to charge the battery fully?Answer= ........ h
Answer: (A) 780J
(B) 1.89×10^-11L
(C)1.67×10^-4 h
Explanation:
Energy of the battery = IVt
=13×60 = 780J
Heat combustion of
1g of gasoline relax 46000J
Therefore 780J will release 780/46000
= 0.017g
Density = mass/volume
Volume = mass/density
Volume =0.017× 10^-3 / 900
= 1.89× 10^-8 m3
= 1.89×10^-11 litres
P=IVt
t=P/IV
= 450/60×13
1.67×10^-4 hours
The energy of a battery, volume of gasoline and time required to charge the battery is required.
The energy is 2808000 J
The volume is 0.683 L.
The time required is 1.733 h
It = Current-time = 60 Ah = [tex]60\times 3600\ \text{As}[/tex]
t = Time
V = Voltage = 13 V
Energy is given by
[tex]E=IVt=ItV\\\Rightarrow E=60\times 3600\times 13\\\Rightarrow E=2808000\ \text{J}[/tex]
[tex]\rho[/tex] = Density = [tex]90\ \text{kg/m}^3=\dfrac{90}{1000}=0.09\ \text{kg/L}[/tex]
C = Thermal heat capacity = [tex]4.57\times 10^7\ \text{J/kg}[/tex]
m = Mass
Power is given by
[tex]P=mC\\\Rightarrow m=\dfrac{P}{C}\\\Rightarrow m=\dfrac{2808000}{4.57\times 10^7}=\dfrac{702}{11425}\ \text{kg}[/tex]
Volume is given by
[tex]V=\dfrac{m}{\rho}\\\Rightarrow V=\dfrac{\dfrac{702}{11425}}{0.09}\\\Rightarrow V=0.683\ \text{L}[/tex]
P = Power = 0.45 kW
Time is given by
[tex]t=\dfrac{E}{P}\\\Rightarrow t=\dfrac{2808000}{450}=6240\ \text{s}\\\Rightarrow t=\dfrac{6240}{3600}=1.733\ \text{h}[/tex]
Learn more:
https://brainly.com/question/2254571?referrer=searchResults
You are in a submarine and are at the surface of the ocean but out in the deep sea. There is a big storm and you want to dive down deep enough so that you avoid the turbulence of the sea. You notice the distance between successive waves (wave length) is 20 meters. How far down do you need to dive down to not feel the effect of the waves?
One of the maritime principles that relate the turbulence and wavelength of the waves is called the "depth of 1/2 wavelength" which is also usually referred to as the floor of the wave: A point of depth in which There is no movement. There if a submarine is found, it can be unbalanced and steadily navigate.
If the wavelength is 20 meters, then it must be submerged 10 meters (20/2) to avoid turbulence.
Since we cannot physically collect data from stars and most other objects in the universe, almost all of the information we obtain from the universe comes from analyzing the light, or spectra, from those objects. The study of light is known as spectroscopy. As we have seen in this simulation, every blackbody emits light with an easily identified pattern known as the blackbody curve. This is the particular way the total light emitted by a blackbody varies with its frequency. The exact form of the curve depends only on the body's temperature. Since we can treat stars as blackbodies, this is incredibly useful in astronomy that shows us that the color of a star is also indicative of its temperature. Use the simulation to determine the surface temperature of the following star: Betelgeuse is a red supergiant star in the constellation Orion. Knowing that Betelgeuse has peak intensity in the red and infrared wavelengths, adjust the intensity scale and temperature until you can determine the approximate surface temperature of the star. a. 3500K b. 4800K c. 7700K d. 11,000 K
Answer:
3500 K
Explanation:
b = Wien's displacement constant = [tex]2.89\times 10^{-3}\ mK[/tex]
Wavelength range = 700 nm to 10⁶ m. Let us take 825 nm
[tex]\lambda_m=825\ nm[/tex]
From Wien's displacement law we have
[tex]\lambda_m=\dfrac{b}{T}\\\Rightarrow T=\dfrac{b}{\lambda_m}\\\Rightarrow T=\dfrac{2.89\times 10^{-3}}{825\times 10^{-9}}\\\Rightarrow T=3500\ K[/tex]
The surface temperature of Betelguese is 3500 K