Which of these correctly shows what happens when two magnets are placed side by side?
A. N__S 《 《N__S
B. S__N》 《N__S
C. S__N《 》S__N
D. N__S《 》S__N

Answers

Answer 1

Answer:

D

Explanation:

Remember that magnets only attract at different poles. If both poles are the same, they repel

Answer 2
Final answer:

When two magnets are placed side by side they can either attract or repel each other depending on the arrangement of their poles. Option B correctly shows the magnets attracting each other.

Explanation:

When two magnets are placed side by side they can either attract or repel each other depending on the arrangement of their poles. In option B, the magnets are oriented in a way that the south pole of one magnet is facing the north pole of the other magnet. This is the correct representation of what happens when two magnets are placed side by side because opposite poles attract, resulting in the magnets sticking together.

Learn more about Magnetism here:

https://brainly.com/question/13026686

#SPJ2


Related Questions

A rock is dropped from a vertical cliff. The rock takes 6.00 s to reach the ground below the cliff. What is the height of the cliff? (take g=10.0 m/s2)

Answers

Answer:

180 m

Explanation:

The rock follows a free-fall motion - so the vertical distance covered can be found by using the equation

[tex]h=\frac{1}{2}gt^2[/tex]

where

g = 10 m/s^2 is the acceleration due to gravity

t = 6.00 s is the time of the fall

Substituting these data, we find the height of the cliff:

[tex]h=\frac{1}{2}(10 m/s^2)(6.00 s)^2=180 m[/tex]

Final answer:

The height of the cliff from which the rock is dropped can be calculated using the formula h = 0.5*g*t². This gives us a calculated height of 180 meters.

Explanation:

The problem you're dealing with is related to one of the basic physics equations of motion, specifically for an object under constant acceleration - in this case, the acceleration due to gravity. To find the height of the cliff, we can use the formula h = 0.5*g*t², where 'h' is the height, 'g' is the acceleration due to gravity (10.0 m/s² as provided), and 't' is the time it takes for the rock to hit the ground (6.0 seconds in this problem).

Plugging in the known values into the equation gives us h= 0.5*10.0*(6.0)² = 180.0 meters. This means the cliff is approximately 180 meters high.

Learn more about Motion under Gravity here:

https://brainly.com/question/28554700

#SPJ3

An alien spaceship is 8*10^14 m away sends us a radio wave signal. How long does it take for the signal to reach us?

Answers

Answer:

[tex]2.67\cdot 10^6 s[/tex]

Explanation:

The radio signal travels to us at the speed of light, so at a speed of

[tex]c=3.0\cdot 10^8 m/s[/tex]

The distance between the spaceship and the Earth is

[tex]d = 8\cdot 10^{14}m[/tex]

Since the signal travel by uniform motion, we can write

[tex]d = vt[/tex]

where

t is the time the signal needs to reach the Earth

By solving the equation for t, we find

[tex]t=\frac{d}{v}=\frac{8\cdot 10^{14} m}{3.0\cdot 10^8 m/s}=2.67\cdot 10^6 s[/tex]

If a force of 10 N applied to an object with a mass of 1 kg, what is the acceleration of the object?​

Answers

Answer:

10 m/s²

Explanation:

Newton's second law:

∑F = ma

10 N = (1 kg) a

a = 10 m/s²

Select the correct answer.
Why is the primary mirror in a telescope curved?
A.
to magnify the image
B.
to direct light rays to a focal point to intensify them
C.
to change the direction of the rays
D.
to bend the rays
E.
to absorb extra light

Answers

Answer:

to absorb extra light- E.

Answer:

E.

Explanation:

Curved mirrors absorb more light that the flat ones, this means that the image you're gonna get it has more information, you can see more.

That's why curved mirror are also used to vigilance in stores for example. Because allows you to see a more panoramic view due to the extra light reflection.

A 5 kg rock is 8 m above the ground,Calculate it's energy?​

Answers

Answer:

392 J

Explanation:

Gravitational potential energy is:

PE = mgh

where m is mass, g is acceleration of gravity, and h is the height.

PE = (5 kg) (9.8 m/s²) (8 m)

PE = 392 J

The phase of mitosis during which the chromosome pairs line up

along the middle, or the equator, of the cell is called



a. anaphase

b. prophase

c. telophase

d. metaphase
\


Never mind. I got the answer, it was d

Answers

Yep the answer is d

Metaphase is characterized by sister chromatids lining up at the cell's equator, on a plane known as the metaphase plate, preparing for separation during anaphase.

Metaphase is the second stage of mitosis. During this stage, the sister chromatids, with their attached microtubules, line up along a linear plane in the middle of the cell. This is known as the metaphase plate, a plane through the center of the spindle on which the sister chromatids are positioned. The spindles, emerging from centrosomes at either end of the cell, are poised to pull apart the sister chromatids and distribute one from each pair to each side of the cell. The chromosomes are maximally condensed at this time, ensuring efficient separation during the subsequent phase of anaphase.

What is the most significant factor in determining kinetic energy?

Answers

Answer:

The velocity

Explanation:

Kinetic energy of an object is directly proportional to the square of its velocity if mass if kept constant. Therefore, if the velocity is doubled the kinetic energy increases four times.

K.E= 1/2mv²

m is the mass of the object and v the velocity. This means that there must be motion for there to be kinetic energy.

a wave travels at a speed of 793 m/s and has a wavelength of 2.3 meters. calculate the frequency of the wave​

Answers

Answer:

344.8 Hz

Explanation:

The frequency of a wave is given by:

[tex]f=\frac{v}{\lambda}[/tex]

where

v is the speed of the wave

[tex]\lambda[/tex] is its wavelength

Here we have

v = 793 m/s

[tex]\lambda=2.3 m[/tex]

Substituting into the equation, we find

[tex]f=\frac{793 m/s}{2.3 m}=344.8 Hz[/tex]

A 2000 kg car is pulling a 1000 kg trailer. The car's engine exerts 6000 N of force to move the car and the trailer. In addition, the car and the trailer experience a 1000 N frictional force as they are being pulled. What is the magnitude of the net force on this system ?

a. 2000 N
b. 4000 N
c. 5000 N
d. 8000 N

Answers

Final answer:

The magnitude of the net force on the car and trailer system is 5000 N.

Explanation:

The magnitude of the net force on the car and trailer system can be calculated by subtracting the frictional force from the force exerted by the car's engine. In this case, the engine exerts a force of 6000 N and the frictional force is 1000 N. Therefore, the net force is 6000 N - 1000 N = 5000 N. So, the correct answer is c. 5000 N.

Learn more about Net force on a system here:

https://brainly.com/question/2902811

#SPJ2

Suppose a fly and an eagle have the same kinetic energy. How could this be true?

Answers

Final answer:

A fly and an eagle could have the same kinetic energy if the fly compensates its smaller mass by flying at a much higher velocity, whereas the eagle, which has a larger mass, would fly at a slower speed to achieve the same kinetic energy. This is a direct result of the kinetic energy formula and the principle of conservation of energy.

Explanation:

The scenario where a fly and an eagle have the same kinetic energy is actually possible. Kinetic energy, which is the energy an object possesses due to its motion, can be calculated using the formula ½mv², where 'm' is the mass of the object and 'v' is its velocity. For the fly and the eagle to have the same kinetic energy, the fly, which has a much smaller mass compared to the eagle, must compensate by having a much higher velocity. Conversely, the eagle with a larger mass can have the same kinetic energy by flying at a lower velocity.

For example, if we consider the kinetic energy formula, a very light fly (let's say 0.002 kg) moving at a high speed (say 20 m/s) would have a kinetic energy of 0.4 Joules. In comparison, a massive eagle (for instance, 4 kg) would only need to fly at around 0.14 m/s to have the same kinetic energy of 0.4 Joules. This illustrates how mass and velocity can vary inversely for different objects to have equivalent kinetic energies.

While it might seem counterintuitive, this is a direct consequence of conservation of energy and the kinetic energy relationship. The concept that energy cannot be created or destroyed, but only transferred or transformed, means that two vastly different animals could have the same kinetic energy if their masses and velocities are complementary.

a bicycle is a compound machine, true or false

Answers

This is true. The break handles and brakes are levers and the seat adjustment (raise or lower) is a screw.

Answer:

True.

Explanation:

A bicycle is a compound machine.

3. Which subatomic particle(s) determines an atom's atomic number?

Answers

Answer:

The remainder of the hydrogen atom's mass comes from the positively charged proton. The atomic number of an element is the number of protons in its nucleus. Neutrons are neutral particles having a mass slightly greater than that of the proton. Different isotopes of the same element contain the same number of protons but differing numbers of neutrons.

Explanation:

Describe the relationship between electricity and magnetism.

Sample Response: Electrical and magnetic fields occur together. A change in current induces a magnetic field. A change in magnetic field induces a current.

Answers

Answer:In the similar way, a changing magnetic field produces an electric current in a wire or conductor. The relationship between electricity and magnetism is called electromagnetism.

Explanation:

Final answer:

Electricity and magnetism are closely related, where changing electric currents produce magnetic fields and changing magnetic fields induce electric currents. This principle, known as electromagnetism, is fundamental to many technologies and reflects an underlying symmetry in nature.

Explanation:

The interconnection between electricity and magnetism is a cornerstone of the field of electromagnetism. These two phenomena are so intertwined that a change in electric current can produce a magnetic field, and conversely, a change in a magnetic field can induce electric current. This concept is crucial to many technological advances such as generators, transformers, and various electronic devices that are essential to modern life.

For instance, when an electric current flows through a wire, it creates a surrounding magnetic field. If this magnetic field varies, it can induce a current in another nearby circuit, a principle known as magnetic induction. This is the fundamental process behind the operation of electrical generators and transformers. Historical experiments, including those by scientists such as Michael Faraday and Joseph Henry, have shown that electricity can produce magnetism and vice versa.

what is the coefficient for titanium tetrachloride when the equation below is balanced?

Answers

the coefficient of TiCl4 would be 1

Hansel pushes a 2 lb. box 5 feet in 20 seconds. How much work has he done?

Answers

Work = force x distance

You can see time doesn’t matter (if we were talking about power, which is the RATE at which work is performed, that would be a different story).

W = 2 x 5 = 10 foot-pounds of work

Foot-pounds are gross units. Better to work in SI units when you can!

Answer:

10

Explanation:

100 POINTS!!!! ANSWER QUICKLY NOWWWW!!!! How does an electric motor convert electrical energy into mechanical energy? A. When current flows through the motor, it powers electromagnets in the motor. The movement of the electromagnets turns a rod in the motor, which makes the electrical energy available. B. When mechanical energy flows through the motor, it powers electromagnets in the motor. The movement of the electromagnets turns a rod in the motor, which makes the electrical energy available. C. When magnetism flows through the motor, it powers electromagnets that are attracted and repelled by the poles of permanent magnets in the motor. The movement of the electromagnets turns a rod in the motor, which makes the mechanical energy available. D. When current flows through the motor, it powers electromagnets that are attracted and repelled by the poles of permanent magnets in the motor. The movement of the electromagnets turns a rod in the motor, which makes the mechanical energy available.

Answers

Answer:

An electric motor converts electrical energy into mechanical energy. The process is as follows:

D. When current flows through the motor, it powers electromagnets that are attracted and repelled by the poles of permanent magnets in the motor. The movement of the electromagnets turns a rod in the motor, which makes the mechanical energy available.

State the 3 laws of motion

Answers

Answer:

Explanation:

Newton's first law of motion:

An object in motion stays in motion, and an object at rest stays at rest, until acted upon by an unbalanced force.

Newton's second law:

The net force on an object is equal to its mass times its acceleration.

Newton's third law:

For every action, there is an opposite and equal reaction.

in which region of the sun does energy move as waves that transfer from atom to atom

Answers

Answer:

Radiative zone

Answer:photosphere corona core radiative zone chromosphere convective zone. Radiative zone of the Sun does energy move as waves that transfer from atom to atom.

Explanation:photosphere corona core radiative zone chromosphere convective zone. Radiative zone of the Sun does energy move as waves that transfer from atom to atom.

The motion of an object thrown at an angle is__ motion.

Answers

The motion of an object thrown at an angle is projectile motion

Projectile(missile designed to be fired from rocket)

Please help I’m a big stupid idiot head

Answers

Answer:

Explanation:

ur right i think

Ur right gimme brainlyest

The latent heat of vaporization of a substance is the amount of energy associated with doing which of the following to 1 kg of the substance?

(PLEASE HELP NEED ANSWER ASAP!!)

Answers

Converting it from liquid to gas

Answer:

B) Boiling it at its boiling point

Explanation:

As we know that the heat required to convert the given substance from liquid to vapor at its boiling point is known as latent heat of vaporization

So here we know that

[tex]Q = mL[/tex]

here we know that

[tex]L = \frac{Q}{m}[/tex]

so it is known as the heat required to boil the given substance of unit mass at its boiling point

so correct answer will be

B) Boiling it at its boiling point

Caleb is swinging Rachel in a circle with a centripetal force of 533 N. If the radius of the circle is 0.75 m and Rachel has a mass of 16.4 kg, how fast is Rachel moving? Round to the nearest tenth. m/s

Answers

Velocity = √((Centrifugal force *  radius)/mass)

Velocity = √(533 * 0.75 / 16.4)

Velocity = √(399.75 / 16.4)

Velocity = √24.375

Velocity = 4.9 m/s

Answer:

4.9

Explanation:

I just did it

Which units are used to express kinetic energy?

meters

seconds

joules

newtons

Answers

Answer:

The SI units for energy is Joules.

Answer: Joules

Hope This Helps, Please Vote Brainliest!!

A 60.0 kg runner is moving at 6.00 m/s and speeds up to 9.00 m/s. The runner’s change in kinetic energy is 1,350 J.


Answers

Hello i hope you are having a good day :) Question : A 60.0 kg runner is moving at 6.00 m/s and speeds up to 9.00 m/s. The runner’s change in kinetic energy is 1,350 J? = firstly you would need to change the kinetic energy meaning that would be a kinetic energy of 1/2mv^2  so now you would do the m which would be for the mass and the v is the velocity as well the initial of k.e that would be 1/2 x 60 x 6^2 that would equal too = 1,080j Final K.E = 1/2 × 60 × 9² = 2,430 J Work done = change in kinetic energy. = 2,430 - 1,080 = 1,350 J. Hopefully that helps you.

The change in the kinetic energy of the runner will be 1350 J. It is found by subtracting the kinetic energy during two different velocity.

What is kinetic energy?

The energy of the body by the virtue of its motion is known as the kinetic energy of the body. It is defined as the product of half of mass and square of the velocity.

According to the law of conservation of energy, the total energy is defined as the sum of kinetic energy and potential energy.

The change in the kinetic energy is found as;

[tex]\rm KE = \frac{1}{2} m(v^2-u^2)\\\\ KE = \frac{1}{2} \times 60 (9^2-6^2) \\\\ KE=1350 \ J[/tex]

Hence, the change in the kinetic energy of the runner will be 1350 J.

To learn more about kinetic energy, refer to the link;

brainly.com/question/999862

#SPJ2

conclusion on ohm's law experiment ​

Answers

Answer:

Explanation:

In our previous articles, we observed the theoretical formulas of Ohm’s law, its calculations in the lab report, and experiment. Today you’ll learn the verification of theory vs experimental results on a 1 kΩ resistor.

The theoretical results are obtained from the formula of Ohm’s law: V = IR. The experimental verification is provided for a metal film 1 kΩ (±0.05%). We have used a high-quality resistor with negligible tolerance value so as to reduce the tolerance error.

The little problem in our calculations arises due to improper handling of multimeter probes. You can learn the complete method to perform the Ohm’s experiment here and can calculate the current values by using the Ohm’s law calculator.

1. The speed and direction with which an object moves is its

Answers

It’s called velocity. Velocity is a vector quantity so it’s basically the same thing as speed but the difference is it’s speed in a certain direction.

Answer:

The speed and direction with which an object moves is its velocity.

Explanation:

Velocity is the speed of an object with a given direction.

Hope this helps.

If a battery in a circuit is 24 volts and the resistance is 12 ohms what is the current

Answers

I = 2A.

The easiest way to solve this problem is using Ohm's Law equation I = V/R.

The battery in the circuit is V = 24V and the resistance R = 12Ω,  to calculate the current we use the equation above:

I = 24V/12Ω = 2A

Final answer:

Using Ohm's law, which states that current equals voltage divided by resistance, the current in a circuit with a 24-volt battery and a 12-ohm resistance is found to be 2 amperes.

Explanation:

To calculate the current in a circuit with a given voltage and resistance, we can apply Ohm's law, which states that current (I) equals voltage (V) divided by resistance (R). In this case, we are given a 24-volt battery and a resistance of 12 ohms.To calculate the current in a circuit with a given voltage and resistance, we can apply Ohm's law, which states that current (I) equals voltage (V) divided by resistance (R). In this case, we are given a 24-volt battery and a resistance of 12 ohms. Using Ohm's law:

I = V / R

I = 24 V / 12 Ω

I = 2 A

Therefore, the current flowing through the circuit is 2 amperes (A).

Learn more about Ohm's Law here:

https://brainly.com/question/36009177

#SPJ2

This direct relationship graph shows that the position of the car as time elapses.

Answers

When there is direct relationship the car moves with respect to time.

Effect of direct relationship

The direct relationship in the graph shows that the position of the car positively changes as time elapses because there is a direct relationship between position and time.

Direct relationship means when one factor increases the other also increases whereas one decreases the other also decreases so we can conclude that when there is direct relationship the car moves with respect to time.

Learn more about relationship here: https://brainly.com/question/26152883

Learn more: https://brainly.com/question/12680874

Answer: Increases

This direct relationship graph shows that the position of the car

increases as time elapses.

Explanation:  got 100 percent on edge

Which is not a form of light?

Answers

Radio waves, Middle-C, and halitosis are not forms of light.

All of the above are forms of light. Therefore, the correct option is option D among all the given options.

What is light?

Light as well as visible light is electromagnetic that is visible to the human eye. Here between infrared and ultraviolet ranges, visible light is commonly defined as having wavelengths of 400-700 nanometres (nm) or frequencies of 750-420 terahertz.

In physics, the term "light" can be used to more broadly characterize electromagnetic radiation of any wavelength, whether visible or not. Gamma rays, X-rays, microwaves, and radio waves are all forms of light in this sense. All of the above are forms of light.

Therefore, the correct option is option D.

To know more about light, here:

https://brainly.com/question/30749500

#SPJ6

Your question is incomplete but most probably your full question was,  

Which of the following is not a form of light?

A) radio waves

B) microwaves

C) x-rays

D) All of the above are forms of light.

E) None of the above is a form of light

a filament lamp of resistance 3 ohms is connected to the terminals of a 6 V battery. when the switch is closed, the current in the circuit is

Answers

voltage = current * resistance

so

current = voltage/resistance

therefore,

current = 6/3 A = 2 A

Answer:

tratamento de lei ohm

Explanation:

Other Questions
A typical american family uses 1000 kwh of electricity a month. what is the average rrns current in the 120 v power line to a typical house? Janet installed a dimmer on the lights in her bedroom. She slid the dimmer switch, causing the resistance in the circuit to decrease. Assuming the voltage is constant, what affect will Janets actions have on the circuit? The voltage will increase from 120 to 240 volts. The lights will brighten. The current will decrease. The current will increase. The lights will dim. What economic activity is located in the taiga of russia what global influence shaped the policy of woodrow wilson?TerrorismGlobalizationEthnic UnrestCommunism y varies inversely with xk= 1.25What is the value of y when x is 5? 1. How did middle class people generally differ from the lower class2.They lived in urban tenements,They moved to the centers of the cities,They had more time for leisure activities,They modeled their lives on foreign royalty. What is the area of parallelogram ABCD? According to Bhutto, what makes a government effective? You will create two classes, one for a box and one for a triangle. Each of the figures, the box and the triangle, will have an offset telling how far they are indented from the edge of the screen. Each figure will also have a size, although the size will be determined differently for a box and a triangle. For a box, the size is given as the width and the height, expressed in the number of characters. Because characters are taller than they are wide, a box will look taller than you might expect when it is written on the screen. For a triangle, the size will be given by its base. The triangle will point up, and the base will be at the bottom. The slope of a side of the triangle is limited to what you get by indenting one character per line. So once the base is chose, you have no choice regarding what the sides of the triangle will be. We also assume that the base size of a triangle must be odd. The following shows a sample of a 5-by-5 box and a triangle with base of size 15. Assuming that the offset 10. The CAN SOMEONE PLEASE HELP ME WITH BIBLE???I ALREADY HAVE SOME STUFF DOWN. JUST PLEASE GIVE ME SOMETHING MORE TO WRITE DOWN If m 1 = 90, what is m ACB?90180270 hows does one determine a molecular formula from the emprical formula? how do i make "atletico" plural in spanish A trapezoid has a base of two and six and an area of 24 square units. What is the height? help me with this please Determine if triangle XYZ with coordinates X(1, 1), Y(5, 6), and Z(6, 2) is a right triangle. Match the systems of linear equations with their solutions. Match each term with the appropriate example1. Absolute value2. All real numbers3. x = -54. No solution5. Adding the opposite to both sides of the equation.a.|2x| = -10b.3x = 3xc.5x = -25d.| - 7| = 7e.Canceling Llena el espacio con la forma apropiada del verbo en EL PRETRITO.--> El vuelo tarde del aeropuerto. (salir) Symmetry is an important component of photography. Photographers often use reflection in water tocreate symmetry in photos. Which of the following types of symmetry are created from the abovephoto? Select all that applya rotationalb horizontalc verticald diagonale translational Steam Workshop Downloader