Which statement has an inference mixed in?
A. The cells were rectangular and packed tightly together
B. The cells were no longer rectangular
C. They must have burst when they were microwaved
D. In the pond water, there was a small organism moving around very quickly
E. There was a white or clear dot inside most of the purplish cells of the red onion

Answer:

-- Determine solubility of compounds using

generalized solubility rules.

-- Determine the equilibrium concentration.

-- Write the dissociation equation for equilibrium.

-- To find the formula for Ksp  , write the product

of the concentrations of the ions formed.

-- Raise the concentrations to the correct power

based on the associated coefficients.

Explanation:

This was the checklist on edge. 2021. (There was one more thing, but it had a picture and it wouldn't load in sooo...ya. Sowwy -.-)

That would be when the baseball is rising. The energy from the throw is kinetic energy.

Answer:

They Both get benefited

Explanation:

Final answer:

In the relationship described, cattle egrets benefit by eating insects disturbed by grazing antelope, making it a commensal relationship where egrets benefit and antelope are typically unaffected. The correct answer to the question is A, with egrets gaining a food source from the activity of the antelope. So the correct option is A.

Explanation:

The relationship between cattle egrets and large grazing animals like rhinoceroses, elephants, antelope, and cows is a wonderful example of commensalism in nature. When large animals graze, they disturb insects in the grass, which the cattle egrets then feed on. This relationship is beneficial to the egrets as they gain a food source, but the large animals are neither harmed nor specifically benefitted by the presence of the egrets. However, sometimes there might be a slight advantage to the large animals if the egrets do remove pests like ticks or fleas, but this isn't the primary interaction.

Considering the relation between the cattle egrets and the antelope in the provided scenario, the most accurate answer would be:

This conclusion is based on the context of the question highlighting the egrets eating insects or small mammals that are disturbed by the grazing antelope.

Propane is a hydrocarbon and it will burn in presence of oxygen (it will undergo combustion) to give carbon dioxide and water (all in gas phase).

In presence of oxygen the carbon gets oxidized to carbon dioxide and hydrogen to water.

The general equation for a hydrocarbon undergoing combustion is

[tex]CxHy(g)  + (x+\frac{y}{4})O_{2}  ---> xCO_{2}(g)   +\frac{y}{2}H_{2}O(g)[/tex]

Here we are studying the combustion of propane so

x = 3

y = 8  

Propane has molecular formula of C3H8

Therefore the balanced equation will be

[tex]C3H8(g)  + (3+\frac{8}{4})O_{2}  ---> 3CO_{2}(g)   +\frac{8}{2}H_{2}O(g)[/tex]

Or

[tex]C3H8(g)  +   5O_{2} (g)  ---> 3CO_{2}(g) + 4H_{2}O(g)[/tex]

Answer:

B

Explanation:

its right

I believe a and d are both compounds. Sorry I couldn't help you much.

Answer:

Br2 + S2O32- + 5H2O –> 2Br- + 2SO4 + 10H+ + 6e

Explanation:

So, if we were to count the number of atoms on both sides, it would be: 2 Br, 2S, 3O, 2H, 1O | 1 Br, 1S, 4O, 1H. Because O appears with S and H on the reactant side of the equation, you would combine the count. This means that instead of 3O and 1O its 4O (3+1=4 so 4 oxygen atoms). So the count is: 2 Br, 2S, 4O, 2H | 1 Br, 1S, 4O, 1H.

Now it helps to look at the atoms that have the same number on both sides of the equation so you can see which atoms you don't have to worry about. The O count is the same on both sides, but since it's associated with S and H on the reactant side of the equation, you do have to worry about it on the product side. All right so far?

It's also easier to leave the solitary atoms alone until the end, so here we'll fix the count for Br towards the end since its alone on both sides of the equation. For right now, let's look at S. As part of the reactant, there are 2 of them, but only 1 as part of the product. This means that we must have another S atom on the product side, so the equation would be:

Br2 + S2O3 2- + H2O –> Br- + 2SO4 + H+ with the count as 2 Br, 2S, 4O, 2H | 1 Br, 2S, 4O, 1H

However, this also affects O on the product side, making the count be 8O since 2•4=8.

The count is thus 2 Br, 2S, 4O, 2H | 1 Br, 2S, 8O, 1H.

At this point, the count is incorrect for O, Br, and H. To fix the count for O, you need to increase the number of O atoms without adjusting S. To do that, you would only increase the number of water molecules instead of the S2O3 molecule. You need 8 O on the reactant side and so far you only have 4, so that means you must have 5H2O molecules (it would give you 5O in addition to the 3 from S2O3). Now the O count is set and the equation look like this:

Br2 + S2O3 2- + 5H2O –> Br- + 2SO4 + H+ with the count 2 Br, 2S, 8O, 5H | 1 Br, 2S, 8O, 1H.

You now need to adjust the H and Br count. On the product side, you have 1 H as well as 1 Br when you need 5H and 2Br. The adjustments are made on the product side and because both atoms are by themselves this makes it easy! Just have 10H and 2Br on the product side so the atoms are balanced (remember that its H2 on the reactant side)! The equation now looks like this:

Br2 + S2O3 2- + 5H2O –> 2Br- + 2SO4 + 10H+ with the count 2 Br, 2S, 8O, 10H | 2 Br, 2S, 8O, 10H. As you can see, the count shows you that both sides have the same amount of each type of atom. Now we need to look at the charges.

To figure out the amount of charge on each side, just look at the exponential number (small number above last atom of molecule) and add them together. On the reactant side, there is only a charge of -2 because of one S2O3 with a charge of -2 (1• -2= -2); Br2 and 5H2O are inert, charge-wise.

However, on the product side there is a total charge of 4. This is because 2•-1 + 2•-2 + 10•1= -2 + -4 +10= -6 +10= 4. To make the charge balanced, you need to adjust the side with the larger number to make it equal the smaller one. This is because of the electrons which have a negative charge, thus bring the number down. So how do you get 4 to become -2? You would subtract 6, so this means that there are 6 electrons on the product side.

All together, the equation looks like this:

Br2 + S2O32- + 5H2O –> 2Br- + 2SO4 + 10H+ + 6e

10 i think not sure

Answer:

47 %  

Step-by-step explanation:

The formula for relative humidity (RH) consists of three parts:

[tex]a_{d} = 6.112e^{\frac{17.502T_{d} }{240.97+T_{d}}}[/tex]

[tex]a_{w} = 6.112e^{\frac{17.502T_{w} }{240.97+T_{w}}}[/tex]

[tex]RH = \frac{ a_{w}-0.668 745(1+0.00115T_{w})(T_{d}-T_{w})}{a_{d}}\times100[/tex]

Data:

[tex]T_{d} = 28 ^{\circ}\text{C}; T_{w} = 20^{\circ}\text{C}[/tex]

Calculations:

[tex]a_{d} = 6.112e^{\frac{17.502\times28}{240.97+ 28}}[/tex]

[tex]a_{d} = 6.112e^{\frac{490.1}{238.97}}[/tex]

[tex]a_{d} = 6.112e^{1.822}[/tex]

[tex]a_{d} = 6.112\times 6.184[/tex]

[tex]a_{d} = 37.88[/tex]

[tex]a_{w} = 6.112e^{\frac{17.502\times20}{240.97+ 20}}[/tex]

[tex]a_{w} = 6.112e^{\frac{350.0}{260.97}}[/tex]

[tex]a_{w} = 6.112e^{1.341}[/tex]

[tex]a_{w} = 6.112\times 3.824[/tex]

[tex]a _{w} = 23.37[/tex]

[tex]RH = \frac{ 23.37 - 0.668 745(1+0.00115\times20)(28 - 20)}{37.88}\times100[/tex]

[tex]RH = \frac{ 23.37 - 0.668 745(1+0.02300)\times8}{37.88}\times100[/tex]

[tex]RH = \frac{ 23.37 - 0.668 745\times1.02300\times8}{37.88}\times100[/tex]

[tex]RH = \frac{ 23.37 - 5.4738}{37.88}\times100[/tex]

[tex]RH = \frac{ 17.90}{37.88}\times100[/tex]

[tex]RH = 47.3 \%[/tex]

It's much easier to use a RH table (see below) and get the same result.

The answer cvould be syrup

Syrup, Honey, Milk, and Soda.

Answer:

190 °C  

Step-by-step explanation:

The pressure is constant, so this looks like a case where we can use Charles’ Law:  

V₁/T₁ = V₂/T₂      Invert both sides of the equation.  

T₁/V₁ = T₂/V₂      Multiply each side by V₂

T₂ = T₁ × V₂/V₁

=====

V₁ = 3.75 L; T₁ = (37 + 273.15) K = 310.15 K  

V₂ = 5.6 L;   T₂ = ?  

=====

T₂ = 310.15 × 5.6/3.75

T₂ = 310.15 × 1.49

T₂ = 463 K

t₂ = 463 – 273.15

t₂ = 190 °C

Answer : The percent composition of Na, O and H elements are 57.47%, 40% and 2.52% respectively.

Solution : Given,

Molar mass of sodium = 22.99 g/mole

Molar mass of oxygen = 16 g/mole

Molar mass of hydrogen = 1.008 g/mole

First we have to calculate the molar mass of NaOH.

[tex]\text{ Molar mass of NaOH}=\text{ Mass of Na}+\text{ Mass of O}+\text{ Mass of H}[/tex]

[tex]\text{ Molar mass of NaOH}=22.99+16+1.008=39.998g/mole[/tex]

Now we have to calculate the percent composition of all the elements.

[tex]\%\text{ composition of Na}=\frac{\text{ Molar mass of Na}}{\text{ Molar mass of NaOH}}\times 100=\frac{22.99}{39.998}\times 100=57.47\%[/tex]

[tex]\%\text{ composition of O}=\frac{\text{ Molar mass of O}}{\text{ Molar mass of NaOH}}\times 100=\frac{16}{39.998}\times 100=40\%[/tex]

[tex]\%\text{ composition of H}=\frac{\text{ Molar mass of H}}{\text{ Molar mass of NaOH}}\times 100=\frac{1.008}{39.998}\times 100=2.52\%[/tex]

Therefore, the percent composition of Na, O and H elements are 57.47%, 40% and 2.52% respectively.

The percent compositions of Sodium, Oxygen, and Hydrogen in NaOH are 57.5%, 40%, and 2.5% respectively, based on their atomic masses and the molar mass of NaOH from the periodic table.

The percent composition of an element in a compound can be calculated using the atomic masses found on the periodic table and the molecular formula of the compound. The compound in question here is Sodium Hydroxide, or NaOH.

Firstly, let's find out the molar mass of NaOH. Sodium (Na) has an atomic weight of approximately 23 g/mol, Oxygen (O) is about 16 g/mol, and Hydrogen (H) is about 1 g/mol. Therefore, the molar mass of NaOH is 23 + 16 + 1 = 40 g/mol.

To find the percent composition, divide the atomic mass of each element by the total mass of the compound, then multiply by 100%. For Sodium: (23/40)*100% = 57.5%, for Oxygen: (16/40)*100% = 40%, and for Hydrogen: (1/40)*100% = 2.5%.

https://brainly.com/question/34955205

#SPJ3

The excretory system words with the respiratory system to remove carbon dioxide.

It works with the respiratory system because it helps the lungs get rid of carbon dioxide and water vapors.

Hope this helps,

Davinia.

The position of elements on the periodic table is significant. The elements arranged in combination on the periodic table exhibit identical electronic configurations and thus identical reactivity and chemical properties. The vertical rows of elements are known as groups.  

Fluorine is a group 17 element. This group has a unique name, they are termed as halogens. Chlorine is also a halogen, they both exhibit seven valence electrons in their outer shell, and as such desires to take an additional electron for a stable octet to form the single charged anion.  

Oxygen is a group 16 element, exhibiting 6 valence electrons, and likes to prevail as the double charged anion. As a consequence, the chemical properties of fluorine more closely resemble with that of chlorine, and not with oxygen.  

Proton and an electron .

Sb2 as a standalone molecule is unusual. While Antimony (Sb) usually forms a trigonal pyramidal molecule, the exact structure and polarity depend on the other atoms in the molecule.

The geometry name for Sb2 seems to be incorrect as it is unusual for antimony (Sb) to form a molecule with itself. Assuming it was intended to be SbF3 or similar, antimony typically forms bonds that result in a trigonal pyramidal molecular structure due to the electron geometry and polar bonds. However, the correct molecular structure and polar/non-polar status depends on the other atoms in the molecule.

As per the reference, antimony can form antimony(III) sulfide, which is also known as Sb2S3. Antimony typically has an oxidation state of +3 or +5 as it has 5 valence electrons, meaning in most of its compounds, it will form 3 covalent bonds and leave 2 electrons unshared, resulting in a trigonal pyramidal shape with sp³ hybridization, which will likely be a polar molecule due to the unequal sharing of electrons between Sb and other atoms.

https://brainly.com/question/503958

#SPJ3

speed of light=wavelength*frequency

3*10^8m/s=wavelength*1.20*10^13

wavelength=3*10^8/1.2*10^13

=10^-5/0.4=2.5*10^-5m

Answer: 1-2, 2-1, 3-3, 4-4

Explanation:

1. planet A is an inner planet as its distance from sun is 1.52 AU.

2. Planet B is an outer planet as its distance from sun is 19.22 AU.

3. planet A is Mars as it has only 2 moons.

4. planet B is Uranus because it has 27 moons.

Hence, 1-2, 2-1, 3-3, 4-4

X rays have the shortest wavelength among the given options, while ultraviolet radiation enables your body to make vitamin D.

The answer to the first question is D) X rays because X-rays have the shortest wavelength among the options given. X-rays have a wavelength range of 0.01 - 10 nanometers, which is shorter than the wavelengths of green light, radio waves, and infrared radiation.

The answer to the second question is A) ultraviolet radiation. When your skin is exposed to ultraviolet (UV) radiation from sunlight, it triggers a series of chemical reactions in your body that produce vitamin D.

https://brainly.com/question/8264472

#SPJ6

Rainy weather has low pressure because it occurs when air mass warms causes the air layer to expand upward & outward causes to remove air from the colum, reducing air pressure.

✿ Clear Cutting a Forest is likely to cause the Loss of Soil by Erosion

Clear cutting forests primarily causes soil loss through erosion. Without the protection of trees, soil is easily washed away by rain and is no longer held in place by tree roots.

Clear cutting a forest is likely to cause the loss of soil primarily by erosion. When a forest is clear cut, it removes the trees that protect the soil from direct rain impact, causing the soil to be washed away easily. This is soil erosion. Furthermore, the tree roots that once secured the soil in place are no longer present, facilitating more rapid soil movement and loss. The process of soil erosion, like compaction, pollution, and overuse, can make the land unsuitable for vegetation growth. However, among the options given, clear cutting leads most directly to soil erosion.

https://brainly.com/question/37907836

#SPJ2

I think it is oxidation number

Answer:

Mass of oxygen in glucose = 29.3g

Explanation:

Mass of glucose given is 55grams.

We are to find the mass of oxygen in this compound.

In the compound we have 6 atoms of oxygen.

Solution

To find the mass of oxygen in glucose, we calculate the formula mass of glucose. We now divide the formula mass of the oxygen atom with that of the glucose and multiply by the given mass to find the unkown mass.

Atomic mass of C = 12g

                           H = 1g

                           O = 16g

Formula mass of C₆H₁₂O₆ = {(12x6) + (1x12) + (16x6)} = 180

             Mass of O in glucose = [tex]\frac{6x16}{180}[/tex]  x 55

                                                  = [tex]\frac{96}{180}[/tex] x 55

                                                  = 0.53 x 55

            Mass of oxygen in glucose = 29.3g

ILL FREAKING DIE FROM LOVE lol

That would e awesome

The correct answer is option A, that is, HCl.  

An acid refers to an ion or molecule possessing the tendency of donating a hydrogen ion or a proton, or alternatively, exhibiting a tendency of producing a covalent bond with a pair of electrons. The aqueous Arrhenius acids exhibit characteristic features that offer a practical illustration of an acid.  

The acids can turn blue litmus paper red, can form aqueous solutions with a sour taste, and reacts with bases and some kind of metals to produce salts. One of the general aqueous acids is HCl (hydrochloric acid) that is found in the stomach and stimulates digestive enzymes.  

Among the options given, HCl (Hydrochloric acid) is considered to be an acid because it is listed under strong acids and releases hydrogen ions (H+) in aqueous solution, unlike the other options which are strong bases.

Looking at the list provided, we can identify HCl (Hydrochloric acid) as an acid. Bases are compounds that, in aqueous solution, release hydroxide ions (OH-), whereas acids are compounds that release hydrogen ions (H+) in aqueous solution. From the provided lists and examples in the reference information

HCl is listed under strong acids, clearly indicating it as an acidic compound

KOH (Potassium hydroxide), NaOH (Sodium hydroxide), and Ca(OH)2 (Calcium hydroxide) are mentioned as strong bases, hence they are not considered acids.

Therefore, the correct answer to which of the following is considered to be an acid is A) HCl.

A compound contains atoms of different elements chemically combined together in a fixed ratio. An element is a pure chemical substance made of same type of atom. Compounds contain different elements in a fixed ratio arranged in a defined manner through chemical bonds.

The properties of the compound are different from the properties of the elements that make it up.

When elements combine in a specified ratio, compounds are formed. These compounds differ markedly from the elements that compose them.

As elements combine to form compounds, the individual properties of the combining elements are no longer observed. Only the properties of the compound formed is now observed.

Hence, the properties of the compound are different from the properties of the elements that make it up.

Learn more: https://brainly.com/question/11067389

If it is three moles of NaOH i.e 3 NaOH

The number of atoms in each mole = 3 moles atoms

so total moles of atom = 9 moles of atom

in each mole of atoms = 6.023 X 10^23 atoms

so total atoms in three moles of NaOH = 9 X 6.023 X 10^23 atoms

= 5.4207 X 10^24 atoms

In a neutralization reaction, equivalent volumes of solutions with equal normality will neutralize each other. Thus, 53 mL of 0.0050 N KOH will neutralize 53 mL of 0.0050 N H2SO4.

To answer the question 'How many milliliters of 0.0050 N KOH are required to neutralize 53 mL of 0.0050 N H2SO4 ?', we must understand the concept of neutralization in the context of acid-base reactions. Neutralization occurs when an acid reacts with a base to produce water and a salt, with no excess of hydrogen or hydroxide ions left in the solution.

In this case, the reaction is between KOH (Potassium Hydroxide, a base) and H2SO4 (Sulfuric Acid, an acid). As both solutions are of the same normality (0.0050 N), they will neutralize each other in equal volumes. Hence, 53 mL of 0.0050 N KOH are required to neutralize 53 mL of 0.0050 N H2SO4.

This concept ties into titration, a technique where a solution of known concentration (in this case, KOH) is used to determine the concentration of an unknown solution (H2SO4). It's important to note that this is a simplified example as it assumes 1:1 stoichiometry. For other reactions, it might be necessary to take into account the stoichiometric coefficients in the balanced chemical equation.

https://brainly.com/question/32025930

#SPJ3

Protons= 88

Neutrons= 138.

The weight of an element is comprised of entirely protons and neutrons. To get the protons look at the atomic number on the periodic table (88) and those are your protons. To get the neutrons take the weight of the isotope that you have and subtract the protons, giving you 138.

A volcanic eruption

The geometry and polarity of PF5 is trigonal bipyramidal, and it is a non-polar molecule due to its symmetrical shape causing the dipole moments to cancel out.

The geometry name for PF5 is trigonal bipyramidal. This is determined by the VSEPR model, which takes into account that PF5 has five bonding pairs of electrons and no lone pairs, giving it an AX5 designation. Since all electron groups are bonding pairs, no bond angle deviations from the ideal are expected.

Regarding polarity, PF5 is a non-polar molecule. This is because it has high symmetry with all the bonds being of identical polarity and oriented in a way that the dipole moments cancel out, resulting in a zero net dipole moment.

https://brainly.com/question/30052851

#SPJ2

Carbons starting from the left end:

Refer to the sketch attached.

The hybridization of a carbon atom depends on the number of electron domains that it has.

Each chemical bond counts as one single electron domain. This is the case for all chemical bonds: single, double, or triple. Each lone pair also counts as one electron domain. However, lone pairs are seldom seen on carbon atoms.

Each carbon atom has four valence electrons. It can form up to four chemical bonds. As a result, a carbon atom can have up to four electron domains. It has a minimum of two electron domains, with either two double bonds or one single bond and one triple bond.

Starting from the left end (H₂C=CH-) of the molecule:

Carbon atoms in a molecule can exhibit different kinds of hybridization, including sp³ and sp, leading to different molecular geometries such as tetrahedral and linear. For example, in acetylene, the carbon atoms have sp hybridization, forming a triple bond. In contrast, in a molecule like methane, the carbon atom undergoes sp³ hybridization, forming a tetrahedral structure.

In the context of the given molecule, we observe various types of hybridization in the carbon atoms. Specifically, carbon atoms 1 and 4 exhibit sp³ hybridization, indicated by their tetrahedral structure created by four single bonds. On the other hand, carbon atoms 2 and 3 are involved in a triple bond, leading to a linear geometry that signifies sp hybridization.

For instance, consider the molecule acetylene (H-C=C-H), where the two carbon atoms are attached by a triple bond due to sp hybridization. The sp hybrid orbitals of both carbon atoms form a σ bond between them and with the hydrogen atoms, while the remaining unhybridized p orbitals overlap side by side to form two π bonds.

Another form of hybridization can be observed in a molecule like CH4, where the carbon atom is surrounded by four hydrogen atoms, demonstrating sp³ hybridization. This tetrahedral structure gives methane its distinct shape. Overall, the type of hybridization a carbon atom undergoes is pivotal in determining the molecular geometry of the compound it forms.

https://brainly.com/question/33441356

#SPJ3