N2 has a lower boiling point than CO because N2, being a nonpolar molecule, can't exhibit dipole-dipole attractions that CO, being a polar molecule, can. This results in weaker intermolecular forces in N2 than CO, hence a lower boiling point.
Explanation:The reason why N2 has a lower boiling point than CO is due to the different intermolecular forces they experience. Both CO and N2 are diatomic molecules with similar atomic masses, therefore, they experience similar London dispersion forces. However, the key difference is that CO is a polar molecule and thus, it experiences dipole-dipole attractions. On the other hand, N2 is a nonpolar molecule and therefore, can't exhibit dipole-dipole attractions. Hence, the dipole-dipole attractions in CO are stronger than the dispersion forces in N2, leading to a higher boiling point for CO.
Learn more about Boiling Points here:https://brainly.com/question/2153588
#SPJ2
Water beads up on waxy surfaces because of a ___________ degree of adhesion with the surface?
high
low
the correct answer is low
A certain weak acid, ha, has a ka value of 8.4×10−7. calculate the percent ionization of ha in a 0.10 m solution
To
determine the percent ionization of the acid given, we make use of the acid
equilibrium constant (Ka) given. It is the ratio of the equilibrium
concentrations of the dissociated ions and the acid. The dissociation reaction
of the HF acid would be as follows:
HA = H+ + A-
The acid equilibrum constant would be expressed as follows:
Ka = [H+][A-] / [HA] = 8.4 x 10^-7
To determine the equilibrium concentrations we use the ICE table,
HF
H+ A-
I 0.10 0
0
C -x +x
+x
---------------------------------------------
E 0.10-x x
x
8.4 x 10^-7= [H+][A-] / [HA]
8.4 x 10^-7 = [x][x] / [0.10-x]
Solving for x,
x = 0.0002894 = [H+] = [A-]
percent ionization = 0.0002894 / 0.10 x 100 = 0.289%
The solubility of silver chloride can be increased by dissolving it in a solution containing ammonia. agcl (s) ag+ (aq) + cl- (aq) k1 = 1.6 x 10-10 ag+ (aq) + 2nh3 (aq) ag(nh3)2+ (aq) k2 = 1.5 x 107 what is the value of the equilibrium constant for the overall reaction? agcl (s) + 2nh3 (aq) ag(nh3)2+ (aq) + cl- (aq) knet = ?
Final answer:
To calculate the net equilibrium constant for the dissolution of silver chloride in ammonia, the individual constants for the dissolution of AgCl and the formation of [tex][Ag(NH_3)_2]^+[/tex] are multiplied, yielding Knet = 2.4 x 10^-3.
Explanation:
The solubility of silver chloride (AgCl) in ammonia solution can be analyzed using the concept of equilibrium constants. The equilibrium constant (K) for the dissolution of AgCl in water is given as 1.6 x 10-10, and the formation constant (K2) of the complex ion [tex][Ag(NH_3)_2]^+[/tex] is 1.5 x 107. To find the net equilibrium constant (Knet) for the overall reaction where AgCl dissolves in the presence of NH3 to form the complex ion and release Cl-, we can multiply the individual constants: K1 * K2. Thus, Knet = (1.6 x 10-10)(1.5 x 107) = 2.4 x 10-3.
What elements make up molecules of sugar?
What observations would lead you to believe that the ink is actually a mixture?
Consider the reaction cl2(g) + br2(g) <=> 2 brcl(g), which is endothermic as written. what would be the effect on the equilibrium position of removing cl2(g)?
What volume of 0.0250 m calcium hydroxide is required to neutralize 33.50 ml of 0.0200 m nitric acid?
Brainliest if answered in the next 5 minutes.
Identify the balanced combination equation.
Cl2O5 + H2O ⟶ 2HClO3
2Fe(OH)3 ⟶ Fe2O3 + 3H2O
Cl2O5 + 3H2O ⟶ HClO3
2Fe(OH)3 ⟶ 2FeO3 + 3H2O
Answer: The correct answer is [tex]Cl_2O_5+H_2O\rightarrow 2HClO_3[/tex]
Explanation:
Combination reaction is defined as the type of reaction in which teo smaller compounds join or combine together to form a large compound.
General representation is given by:
[tex]A+B\rightarrow AB[/tex]
A balanced chemical equation always follow law of conservation of mass. The law states that the total number of individual atoms on the reactant side is always equal to the total number of atoms on the product side.
From the given options:
The equation that is an example of balanced combination reaction is
[tex]Cl_2O_5+H_2O\rightarrow 2HClO_3[/tex]
What is the molarity of a sodium hydroxide solution if 35.4 ml of this solution is neutralized by 24.2 ml of 1.19 m sulfuric acid solution?
The molarity of the sodium hydroxide solution is approximately 0.818 M.
Explanation:To determine the molarity of the sodium hydroxide solution, we can use the equation for the reaction between sodium hydroxide and sulfuric acid: 2NaOH + H₂SO4 → Na₂SO4 + 2H₂O. From the balanced equation, we can see that the ratio of NaOH to H₂SO4 is 2:1. Thus, if 24.2 mL of 1.19 M sulfuric acid solution neutralizes 35.4 mL of the sodium hydroxide solution, we can set up the following equation:
Molarity of NaOH × Volume of NaOH = Molarity of H₂SO4 × Volume of H₂SO4
Molarity of NaOH × 35.4 mL = 1.19 M × 24.2 mL
Rearranging the equation, we get:
Molarity of NaOH = (1.19 M × 24.2 mL) / 35.4 mL
Calculating the molarity of NaOH, we find that it is approximately 0.818 M.
what is the percent composition in chloric acid (HClO3)?
Matter appears to be conserved in chemical reactions but not in nuclear reactions because:
A. the law of conservation of matter only applies to a limited number of chemical and nuclear reactions
B. the law of conservation of mass-energy applies only to nuclear reactions
C. in nuclear reactions, particles move too quickly to have their masses measured
D. in nuclear reactions the changes in mass are large enough to be detected
I think it's A? Just tell me if I'm right, and if I'm wrong, point me in the right direction :)
An elixir of ferrous sulfate contains 220 mg of ferrous sulfate in each 5 ml. if each milligram of ferrous sulfate contains the equivalent of 0.2 mg of elemental iron, how many milligrams of elemental iron would be represented in each 5 ml of the elixir?
Each 5 ml of the ferrous sulfate elixir contains 44 milligrams of elemental iron.
Explanation:The question is asking for the amount of elemental iron in 5 ml of ferrous sulfate elixir. Given that each milligram of ferrous sulfate contains 0.2 mg of elemental iron and there's 220 mg of ferrous sulfate present in every 5 ml, a simple multiplication would give the quantity of elemental iron in each 5 ml of the elixir.
Formula: Ferrous Sulfate (mg) x Elemental Iron/Ferrous Sulfate = Elemental Iron (mg)
Using the given values, it goes as follows: 220 mg x 0.2 = 44 mg. Consequently, each 5 ml of the elixir contains 44 milligrams of elemental iron.
Learn more about elemental iron content here:https://brainly.com/question/33060172
#SPJ12
What is the molar mass of (NH4)2O? Explain how you calculated this value.
The molar mass of (NH₄)₂O (ammonium oxide) is 52.10 g/mol.
To calculate the molar mass of (NH₄)₂O (ammonium oxide), we need to determine the total sum of the atomic masses of all the atoms in the chemical formula.
The atomic masses are as follows:
N (Nitrogen) = 14.01 g/mol
H (Hydrogen) = 1.01 g/mol
O (Oxygen) = 16.00 g/mol
Now, let's calculate the molar mass of (NH₄)₂O:
Molar mass of (NH₄)₂O = (2 x N) + (8 x H) + (1 x O)
Molar mass of (NH₄)₂O = (2 x 14.01 g/mol) + (8 x 1.01 g/mol) + (1 x 16.00 g/mol)
Molar mass of (NH₄)₂O = 28.02 g/mol + 8.08 g/mol + 16.00 g/mol
Molar mass of (NH₄)₂O = 52.10 g/mol
So, the molar mass of (NH₄)₂O (ammonium oxide) is approximately 52.10 g/mol.
To know more about molar mass here
https://brainly.com/question/31545539
#SPJ6
QUESTION 5
In their compounds, metals:
are assigned positive oxidation numbers
are assigned negative oxidation numbers
are assigned oxidation numbers of zero
can be assigned any oxidation number that balances the equation
QUESTION 6
In the reaction, Zn (s) + Fe+2 (aq) Imported Asset Zn+2 (aq) + Fe (s), the oxidizing agent is:
the Zn
the Fe
the Zn+2
the Fe+2
In compounds, metals have positive oxidation numbers; for instance, iron has a +2 oxidation number in FeO. In the reaction Zn + Fe2+ → Zn2+ + Fe, Fe2+ is the oxidizing agent as it gains electrons and is reduced.
In their compounds, metals are generally assigned positive oxidation numbers because they tend to lose electrons and form cations. For example, in FeO, iron has an oxidation number of +2 (Fe2+), correctly balancing the -2 charge from oxygen to result in a neutral compound.
Regarding the reaction Zn (s) + Fe2+ (aq) → Zn2+ (aq) + Fe (s), the oxidizing agent is the species that is reduced by gaining electrons. In this case, Fe2+ is the oxidizing agent because it gains electrons from Zn to form Fe (s). The Zn is oxidized to Zn2+, making it the reducing agent.
Predict how the addition of a catalyst would affect the rate of the reaction below, and explain your prediction. h2 (g) + i2 (g) 2hi
Explanation:
A catalyst helps in increasing the rate of a chemical reaction without itself getting consumed in the reaction.
Basically, a catalyst decreases the activation energy so that reactant molecules can easily participate in the reaction.
For example, when a catalyst is added to [tex]H_{2}(g) + I_{2}(g) \rightarrow 2HI[/tex] then there will be a decrease in activation energy and both reactants (hydrogen and iodine) can easily participate in the chemical reaction.
As a result, formation of product (HI) becomes faster.
Thus, we can conclude that a catalyst helps in increasing the rate of a reaction.
The national drug code number (NDC) of the drug is included in this section of a drug monograph
The Valence Electrons of an Atom of Which Element would feel a Greater Effective Nuclear Charge than the Valence?
The Valence Electrons of an Atom of which element would feel a greater effective Nuclear Charge than the valence electrons of a Boron (B) atom?
Aluminum (Al)
Beryllium (Be)
Hydrogen (H)
Carbon (C)
Carbon's valence electrons feel a greater effective nuclear charge than those of a Boron atom because Carbon has one more proton without significantly increasing the shielding effect, leading to a stronger pull on the valence electrons.
Explanation:The question asks which element's valence electrons feel a greater effective nuclear charge than those of a Boron (B) atom. To answer this, one must understand how shielding and effective nuclear charge work. As we go from left to right across a period in the periodic table, while the number of core electrons remains the same, the nuclear charge increases. This means the valence electrons feel a stronger pull from the nucleus since they are not effectively shielded by the same number of core electrons. Comparing Boron with Aluminum (Al), Beryllium (Be), Hydrogen (H), and Carbon (C), we find that Carbon, having one more proton than Boron, does not increase the shielding effect significantly, which leads to its valence electrons feeling a greater effective nuclear charge than Boron's. Therefore, Carbon (C) is the correct response.
Calculate the pressure in atmospheres exerted by 10.0moles of hydrogen gas at 293 kelvins if it is stored in a 7.50 liter container. Your value should be a decimal number written to three significant figures. Given: R= 0.08205 liter x atmosphere/mole x kelvin
Answer:
The correct answer is 32.1 atm. If you rearrange the ideal gas law equation to find pressure (P) and substitute the known values for the rest of the variables (n, T, and V), we get pressure equal to 32.1 atm.
Explanation:
I don't cap. Anyways good luck! I believe in you!
What is the only subatomic particle that is directly involved in the chemical reactions?
which statement best describes why specific heat capacity is often more useful than heat capacity for scientists while comparing two materials
Answer:
A.
key words: intensive, does not depend on sample size
Explanation:
What is the H+ if the pH of a solution is 1.65?
Answer:
[H⁺] = 2.2 × 10⁻²
Explanation:
pH = -log [H⁺]
10∧-pH = [H⁺]
[H⁺] = 10⁻¹°⁶⁵
[H⁺] = 0.0224
[H⁺] = 2.2 × 10⁻²
So the concentration of hydrogen in solution of 1.65 pH is 2.2 × 10⁻².
What is the molarity of the solution made by dissolving a 5.67 g of potassium chloride in enough water to make 100 mL of the solution
Describe one chemical property of Group 1 metals that results from the atoms of each metal having only one valence electron.
A chemical property of Group 1 metals that results from the atoms of each metal having only one valence electron is electronegativity.
Group 1 elements are also known as alkali metals. They include sodium, lithium, potassium, cesium, francium, and rubidium. They can be found in seawater.
A chemical property of Group 1 metals that results from the atoms of each metal having only one valence electron is electronegativity. This means the tendency for the atoms to be able to attract electrons.
Read related link on:
https://brainly.com/question/2827543
Nuclear fusion of hydrogen into helium occurs in the
Nuclear fusion of hydrogen into helium occurs in the core of stars, specifically in their stellar cores.
This process is known as stellar nucleosynthesis and is the primary source of energy production in stars. The intense heat and pressure in the core of a star allow hydrogen nuclei (protons) to overcome their mutual electrostatic repulsion and undergo fusion reactions. It results in the formation of helium nuclei.
The most common fusion reaction in stars is the proton-proton chain, which involves a series of steps leading to the conversion of four hydrogen nuclei into one helium nucleus.
Learn more about nuclear fusion, here:
https://brainly.com/question/14019172
#SPJ6
An organic compound in which a carbonyl group is bonded to two different carbon atoms is a(n) amide. aldehyde. ketone. ester.
Answer: ketone
Explanation:
Functional groups are specific group of atoms within molecules that are responsible for the characteristic chemical reactions of those molecules.
1. Amides have functional group [tex]-O=C-NH_2[/tex].
Example: Ethanamide with molecular formula [tex]CH_3CONH_2[/tex]
2. Aldehydes have functional group [tex]-O=CH[/tex].
Example: Ethanal with molecular formula [tex]CH_3CHO[/tex]
3. Ketones have functional group [tex]-C=O[/tex].
Example: Propanone with molecular formula [tex]CH_3COCH_3[/tex]
4. Esters have functional group [tex]-O=C-OR[/tex].
Example: methyl ethanoate with molecular formula [tex]CH_3COOCH_3[/tex]
Which of the following changes requires an oxidizing agent?
O2 yields 2O2-
SO3 yields SO42-
2F- yields F2
MnO2 yields Mn2+
Answer : The correct option is, [tex]2F^-\rightarrow F_2+2e^-[/tex]
Explanation :
Oxidation reaction : It is defined as the reaction in which a substance looses its electrons. In the oxidation reaction, the oxidation state of an element increases. Or we can say that in oxidation, the loss of electrons takes place.
Oxidizing agent : It is defined as the substance which has ability to oxidize the other substances by gaining electrons.
Reduction reaction : It is defined as the reaction in which a substance gains electrons. In the reduction reaction, the oxidation state of an element decreases. Or we can say that in reduction, the gain of electrons takes place.
Reducing agent : It is defined as the substance which has ability to reduce the other substances by losing electrons.
From the given options, we conclude that
(1) [tex]O_2+4e^-\rightarrow 2O^{2-}[/tex]
(2) [tex]SO_3+H_2O\rightarrow SO_4^{2-}+2H^+[/tex]
(3) [tex]MnO_2+4H^++2e^-\rightarrow Mn^{2+}+2H_2O[/tex]
The reaction 1, 2 and 3 shows the reduction reaction. So, it requires a reducing agent.
(4) [tex]2F^-\rightarrow F_2+2e^-[/tex]
The reaction 4 shows the oxidation reaction. Therefore, it requires an oxidizing agent.
Therefore, the correct option is, [tex]2F^-\rightarrow F_2+2e^-[/tex]
What does mass measure?
Determine the [oh] concentration in a 0.169 m ca(oh)2 solution. 0.338 m 0.169 m 5.92 x 10-14 m 2.96 x 10-14 m 0.298 m
The [OH-] concentration in the 0.169 M Ca(OH)2 solution is 0.0088 M. The pOH of the solution is 2.055, and the pH is 11.945.
Explanation:We begin by determining the concentration of hydroxide ions, [OH-], in the Ca(OH)2 solution. Since Ca(OH)2 is a strong base, there are two OH ions for every formula unit dissolved, so the concentration of OH- is 2 times the concentration of Ca(OH)2. Therefore, [OH-] = 2 × 0.0044 M = 0.0088 M.
The concentration of hydroxide ions can be used to calculate the pOH of the solution. The pOH is obtained by taking the negative logarithm of [OH-]. In this case, pOH = -log(0.0088) = 2.055.
To calculate the pH of the solution, subtract the pOH from 14. pH = 14 - 2.055 = 11.945.
Which pair of elements is most apt to form an ionic compound with each other?
A chemist dissolves 192.mg of pure sodium hydroxide in enough water to make up 150.ml of solution. calculate the ph of the solution.