A projectile proton with a speed of 500 m/s collides elastically with a target proton initially at rest. the two protons thenmove along perpendicular paths, with the projectile path at 60 from the original direction. after the collision, what are the speedsof (a) the target proton and (b) the projectile proton

Imagine that you're standing in a large room when a loud noise is made. You begin hearing a series of echoes. The characteristic of sound that best explains what just happened is: Reverberation.

Neglecting air resistance, the rock would have fallen a distance of 20 meters after 2 seconds, calculated using the formula d = gt²/2 with g as the acceleration due to gravity (10 m/s²).

If you drop a rock from a tall building neglecting air resistance, the distance it has fallen after 2 seconds can be calculated using the formula for the distance fallen under constant acceleration, which is d = gt²/2, where g is the acceleration due to gravity (approximately 10 m/s²) and t is the time in seconds the object has been falling.

Plugging in the values, we get:

d = 10 m/s² × (2 s)² / 2 = 20 m

Therefore, the rock would have fallen 20 meters after 2 seconds.

The speed of a proton is about 5.0 × 10⁵ m/s

[tex]\texttt{ }[/tex]

Let's recall the Kinetic Energy formula:

[tex]\boxed {E_k = \frac{1}{2}mv^2 }[/tex]

Ek = kinetic energy ( J )

m = mass of object ( kg )

v = speed of object ( m/s )

[tex]\texttt{ }[/tex]

Acceleration is rate of change of velocity.

[tex]\large {\boxed {a = \frac{v - u}{t} } }[/tex]

[tex]\large {\boxed {d = \frac{v + u}{2}~t } }[/tex]

a = acceleration (m / s²)v = final velocity (m / s)

u = initial velocity (m / s)

t = time taken (s)

d = distance (m)

Let us now tackle the problem!

[tex]\texttt{ }[/tex]

Given:

potential difference = ΔV = -1300 V

mass of proton = m = 1.67 × 10⁻²⁷ kilograms

charge of proton = q = 1.60 x 10⁻¹⁹ coulombs

initial speed of proton = v₁ = 0 m/s

Asked:

final speed of proton = v = ?

Solution:

[tex]Ep_1 + Ek_1 = Ep_2 + Ek_2[/tex]

[tex]qV_1 + \frac{1}{2}mv_1^2 = qV_2 + \frac{1}{2}mv_2^2[/tex]

[tex]q(V_1 - V_2 ) = \frac{1}{2}m( v_2^2 - v_1^2 )[/tex]

[tex]q( 0 - V ) = \frac{1}{2}m ( v^2 - 0^2 )[/tex]

[tex]-q \Delta V = \frac{1}{2} m v^2[/tex]

[tex]v^2 = -2mq \Delta V[/tex]

[tex]v = \sqrt { (-2q \Delta V) \div m }[/tex]

[tex]v = \sqrt { -2 \times 1.60 \times 10^{-19} \times (-1300) \div (1.67 \times 10^{-27})}[/tex]

[tex]v \approx 5.0 \times 10^5 \texttt{ m/s}[/tex]

[tex]\texttt{ }[/tex]

[tex]\texttt{ }[/tex]

Grade: High School

Subject: Mathematics

Chapter: Energy

The speed of a proton that has been accelerated from rest through a potential difference of - 1300 v  would be 4.99 × 10⁵ meters/ second.

Charged material experiences a force when it is exposed to an electromagnetic field due to the physical property of electric charge.

As given in the problem we have to find out the speed  of a proton that has been accelerated from rest through a potential difference of -1300 volts,

The speed of the proton can be calculated with the expression given as follows,

1/2 × mass ×velocity ² = electric charge × potential difference  

v² = 2qV /m

v = √(2qV/m)

  = √ ( 2×1.6×10⁻¹⁹ ×1300 / 1.67×10⁻²⁷)

  =4.99 × 10⁵ meters/seconds

Thus, the speed of the proton would be 4.99 × 10 ⁵  meters/seconds.

To learn more about an electric charge from here, refer to the link given below ;

brainly.com/question/8163163

#SPJ5

707 N

185×0.39×9.8

I just did it and found the answer

A solar eclipse occurs when the Moon blocks the Sun from the Earth's viewpoint during a New Moon phase. The Moon also needs to be crossing the line of nodes, the intersection of the Earth's and Moon's orbit plain.

A solar eclipse occurs when the Moon moves between the Sun and the Earth, casting a shadow on the Earth. This event happens only during a New Moonphase, which is one of the conditions needed. Not all New Moon phases result in a solar eclipse because the Moon's orbit is tilted relative to the Earth's orbit around the Sun. Therefore, for a solar eclipse to take place, the Moon must be in the New Moon phase, and it must also be at a position in its orbit where it crosses the plane of the Earth's orbit around the Sun. This place is known as the line of nodes.

https://brainly.com/question/34401067

#SPJ6

Answer:

static friction

Explanation:

she's not moving so she has static friction

Answer:

10.35 m

Explanation:

d1 = 5 m at angle 53 degree

d1 = 5 (Cos 53 i + Sin 53 j) = 3 i + 4 j

d2 = 8 m at an angle 130 degree

d2 = 8 (Cos 130 i + Sin 130 j) = - 5.14 i + 6.13 j

Total displacement = d = (3 - 5.14) i + (4 + 6.13) j = - 2.14 i + 10.13 j

magnitude of displacement = [tex]\sqrt{(-2.14)^{2}+(10.13)^{2}}[/tex] = 10.35 m

The concept Ohm's law is used here to determine the resistance. The resistance is found to be 16 ohm .The correct option is A.

The relationship between the electric current and the potential difference is given by the Ohm's law. The current which flows through the conductors is directly proportional to the voltage applied. Mathematically the relationship is given as:

V = IR

V - Potential difference

R - Resistance

I - Current

R = V / I

R = 120 / 7.6

R = 15.7 ohm ≈ 16 ohm

The ohm's law holds true if the provided temperature and the other physical factors remain constant. In certain components, increasing the current raises the temperature. In this case Ohm's law is violated.

It is the Ohm's law which maintains the desired voltage drop across the electronic components. It helps to determine the voltage, resistance or current of an electric circuit.

Thus the correct option is A.

To know more about Ohm's law visit;

https://brainly.com/question/12372387

#SPJ3

Assuming that all energy of the small ball is transferred to the bigger ball upon impact, then we can say that:

Potential Energy of the small ball = Kinetic Energy of the bigger ball

Potential Energy = mass * gravity * height

Since the small ball start at 45 cm, then the height covered during the swinging movement is only:

height = 50 cm – 45 cm = 5 cm = 0.05 m

Calculating for Potential Energy, PE:

PE = 2 kg * 9.8 m / s^2 * 0.05 m = 0.98 J

Therefore, maximum kinetic energy of the bigger ball is:

Max KE = PE = 0.98 J

Answer:

[tex]v_s= 37.8 m/s[/tex]

Explanation:

As per Doppler's effect when source and observer moves relative to each other then the frequency of the sound observed is different from the real frequency

When source is moving towards the stationary observer then we have

[tex]f_1 = f_o(\frac{v}{v - v_s})[/tex]

now when source of sound moving away from stationary observer then we have

[tex]f_2 = f_o(\frac{v}{v + v_s}[/tex]

now from above two equations

[tex]\frac{f_1}{f_2} = \frac{v + v_s}{v - v_s}[/tex]

here we know that

[tex]f_1 = 1000 hz[/tex]

[tex]f_2 = 800 hz[/tex]

v = 340 m/s

now we have

[tex]\frac{1000}{800} = \frac{340 + v_s}{340 - v_s}[/tex]

[tex]5(340 - v_s) = 4(340 + v_s)[/tex]

[tex]340 = 9 v_s[/tex]

[tex]v_s = 37.8 m/s[/tex]

The volume of a unit cell of lead, which is a face-centered cubic, can be determined by calculating the edge length of the cell using its atomic radius and then cubing the edge length. The volume of a lead unit cell with an atomic radius of 0.175 nm is 1.205 * 10^-29 m^3.

To calculate the volume of a unit cell of lead, we need to understand that lead crystalizes in a face-centered cubic lattice, where the edge length of the unit cell equals the square root of 2 times the atomic radius, doubled (since the diameter is 2 times the radius). So we first calculate the edge length, a = 2 * atomic radius * sqrt(2), and then calculate the volume of the unit cell, which is a cubic volume, V = a^3.

Given the atomic radius of lead is 0.175 nm or 0.175 * 10^-9 meters, we calculate:

Edge length, a = 2 * 0.175 * 10^-9 meters * sqrt(2) = 0.494 * 10^-9 meters.

The volume V = (0.494 * 10^-9 meters)^3 = 0.1205 * 10^-27 m^3 or 1.205 * 10^-29 m^3.

https://brainly.com/question/32036952

#SPJ11

Ans: The source Address field specifies the station that sends the frame. 

The format of an Ethernet frame includes a destination address at the beginning which contains the address of the device which is sending the frame. And, the source address tells us which station the information is received from. 

Answer:

In the field of radioactivity, the half-life is usually defined as the time required by an unstable radioactive isotope to disintegrate half of its initial composition. For different radioactive isotope elements, this value of half-life is different.

For example, the half-life of uranium-238 is approximately 4.5 billion years and the half-life of Carbon-14 is nearly 5700 years.

During the time of one half-life of a radioactive isotope, half of the parent atoms are disintegrated and forms a comparatively stable daughter isotope. This means that half of the initial concentration of the unstable isotope is reduced.

The Kinetic Energy (KE) is calculated using the formula:

KE = 0.5 m v^2

Where,

m = mass of bare helium nucleus = 6.64 ✕ 10^−27 kg

v = velocity = 0.018 c = 0.018 * 3 ✕ 10^8 m / s^2 = 5.4 ✕ 10^6 m / s^2

Calculating:

KE = 0.5 (6.64 ✕ 10^−27 kg) (5.4 ✕ 10^6 m / s^2)^2

KE = 9.68✕ 10^−14 J

An electron moves in an electric field towards regions of lower potential due to the decrease in its electric potential energy.

An electron moves in an electric field towards regions of lower potential. This is because the electron will move in the direction that tends to decrease its electric potential energy.

An electron moves toward lower electrical potential in an electric field, and will exhibit motion based on the Lorentz force when in a magnetic field. If both electric and magnetic fields are present, perpendicular velocity filtering can occur.

When an electron with initial velocity is introduced into a region where an electric field is present, it will be accelerated by the electric field. An electron moves toward regions of lower potential because it has a negative charge and is repelled by areas of higher negative potential and attracted to areas of higher positive potential. For example, if the electric field is uniform and points in the direction opposite to the electron's initial velocity, the electron will decelerate until it comes to rest, then accelerate in the direction of the field.

In a uniform magnetic field, the electron will start to move in a circular path due to the magnetic force acting perpendicular to its velocity. The radius of this path and the direction of the magnetic force can be determined using the Lorentz force law. If there is both an electric field and a magnetic field present, perpendicular to each other and the velocity of the charged particle, there exists a particular velocity at which the particle will experience no net force, leading to the concept of a velocity filter.

(a) It will strike the ground in 7.14 seconds

(b) The tourist at the bottom must get out in 6.10 seconds

Acceleration is rate of change of velocity.

[tex]\large {\boxed {a = \frac{v - u}{t} } }[/tex]

[tex]\large {\boxed {d = \frac{v + u}{2}~t } }[/tex]

a = acceleration ( m/s² )

v = final velocity ( m/s )

u = initial velocity ( m/s )

t = time taken ( s )

d = distance ( m )

Let us now tackle the problem !

Given:

h = 250 m

Unknown:

t₁ = ?

t₂ = ?

Solution:

We can use the following formula to calculate time taken for the rock to reach the ground,

[tex]h = v ~ t + \frac{1}{2} ~ g ~ t^2[/tex]

[tex]250 = 0 \times t + \frac{1}{2} \times 9.8 ~ t^2[/tex]

[tex]250 = \frac{1}{2} \times 9.8 ~ t^2[/tex]

[tex]250 = 4.9 ~ t^2[/tex]

[tex]t^2 = 250 \div 4.9[/tex]

[tex]t = \sqrt{250 \div 4.9}[/tex]

[tex]t = \frac{50}{7} ~ seconds[/tex]

[tex]\large {\boxed {t \approx 7.14 ~ seconds} }[/tex]

Firstly, we will find the time taken by sound to reach the tourist.

[tex]t_{sound} = \frac{250 ~ m}{335 ~ m/s}[/tex]

[tex]\boxed{ t_{sound} = \frac{50}{67} ~ s }[/tex]

Next, we will find how long will a tourist have to get out of the way.

[tex]t_2 = t_1 - ( t_{sound} + t_{reaction})[/tex]

[tex]t_2 = \frac{50}{7} - ( \frac{50}{67} + 0.300})[/tex]

[tex]\large {\boxed {t_2 \approx 6.10 ~ seconds} }[/tex]

The tourist only has about 6 seconds before getting hit by the stone.

Grade: High School

Subject: Physics

Chapter: Kinematics

Keywords: Velocity , Driver , Car , Deceleration , Acceleration , Obstacle , Speed , Time , Rate

The boulder will be going approximately 70.0 m/s when it strikes the ground, and a tourist will have approximately 1.046 seconds to react and move out of the way after hearing the sound of the rock breaking loose.

Calculating the Speed of a Falling Boulder and Reaction Time for Safety

For part (a) of the question, we want to calculate how fast a boulder will be going when it strikes the ground after falling from a height of 250 meters. We can use the equation of motion under the influence of gravity, which is v = sqrt(2gh), where g is the acceleration due to gravity (9.81 m/s²) and h is the height (250 m). Plugging in these values, we get the final velocity v as the square root of (2 * 9.81 m/s² * 250 m), which is approximately 70.0 m/s.

For part (b), we need to determine how long a tourist has to react and move out of the way after hearing the sound of the rock breaking loose. The sound travels at 335 m/s, so it will take the sound approximately 250 m / 335 m/s to reach the tourist, which is roughly 0.746 s. We must also add the tourist's reaction time of 0.300 s to this. Therefore, the total time the tourist has to react is the sum, which would be approximately 0.746 s + 0.300 s = 1.046 s.

A point charge with a charge q1 = + 2.90 uC is held stationary at the origin hence coordinates are (0, 0).

A second point charge with a charge q2= - 5.40 uC moves from the point x = 0.110 m, y = 0 to the point x = 0.280 m, y = 0.280 m  [(0.110, 0) to (0.28, 0.28)]

The initial distance between the two charges is:

Initial distance = r1 = 0.110 m

The final distance between the two charges is calculated using hypotenuse formula:

Final distance = r2 = sqrt [0.28^2 + 0.28^2]

r2 = sqrt [2 * 0.0784]

r2 = sqrt [0.1568]

r2 = 0.396 m

Δr = r1 - r2 = 0.110 - 0.396 = - 0.286 m

r1r2 = 0.04356 m^2

Work is done by the electric force on q2= W. The formula to use with change in location is:

W =k q1 q2 [1/r2 - 1/r1]

W = 9*10^9 * 2.9*10^-6 * -5.3*10^-6 [(1/0.396) – (1/0.110)]

W = 0.908 J = 9.08*10^-1 J            (ANSWER)