Bart is ready to look for a site for his new business. to help him in his search he should:
Bart should consult a small business development office where he can have the technical assistance in searching for desired site for his business as well as other technical issues can be resolved. He can also use site selection software to personally make sure the right kind of features and choices for his site.
Can an indifference curve be downward sloping in one section, but then bend backward so that it forms a "hook" at the end of the indifference curve?
A researcher became a chef with a resort hotel chain for six months to observe food-handling practices. he saw food preparers using the same towel to wipe their hands, the counter, the food slicer, and cooking utensils during one food preparation session. in addition, he found the chefs tasted the food using their fingers. the researcher used _____ research to determine that more monitoring is needed to make sure that food handlers comply with sanitary regulations.
If the total warehousing cost for the year amounts to $450,000, and 40 percent of the warehousing activity is associated with finished goods and 60 percent with direct materials, how much of the cost would be charged as a product cost?
a. $270,000
The demand for gold toe socks is likely to be more elastic than the demand for power tools because:
The demand for gold toe socks is likely to be more elastic than the demand for power tools because the gold toe sock has more substitutes than the power tools
Further Explanation:
Price Elasticity: It measures the sensitivity of the demand for the services and goods to the change prices. If the demand is elastic then, the small change in price will result in the change in demand. If the demand is elastic then, the change in price will not effect the demand of the commodity.
The number of subsitutes available effects the elasticity of demand. If the number of subsitutes available is more then, demand will be elastic or vice versa. In the case of gold toe sock, there are many substitutes available that can replace the gold toe sock so the demand is elastic. But the
demand for power tools is less elastic because it has fewer subsitutes.
Learn more:
1. Demand and type of goods
https://brainly.com/question/11220857
2. Demand and supply of goods
https://brainly.com/question/11045011
3. Elasticity of demand
https://brainly.com/question/2396092
Answer details:
Grade: High School
Subject: Economics
Chapter: Elasticity of demand
Keywords: The demand for gold toe socks is likely to be more elastic than the demand for power tools because, the gold toe sock has more substitutes than the power tools.
Stein co. issued 14-year bonds two years ago at a coupon rate of 9.2 percent. the bonds make semiannual payments. if these bonds currently sell for 107 percent of par value, what is the ytm?
Areas set up to attract foreign investments by allowing the iportation of raw and intermediate materials without paying tariffs are called
Lisa and mandy have a contract. mandy wants out of the contract; carla sue is willing to take mandyís place, which is satisfactory with lisa. when the carla sue for mandy exchange is made, this is known as:
What do physical anthropologists call the taxonomic group that includes humans and humanlike ancestors, excluding living nonhuman primates?
Tennis rackets can be purchased for $60 each from an outside vendor. it costs the manufacturer $80 a piece to produce them, of which 30% is unavoidab
If martha leveraged a(n) __________ branding strategy to grow her overall business, she might develop a line of imported flavored teas and sell them at the local college town food cooperative using the college town name for the new product line.
Becky fenton has 65/130/75 automobile insurance coverage. if two other people are awarded $110,000 each for injuries in an auto accident in which becky was judged at fault, how much of this judgment would the insurance cover?
"alice purchased a new computer from compu-best, a local computer store. she used the computer for a week when the computer began to malfunction. she returned it to the store, where the store manager assured her that he could repair what he called a "minor problem" in the computer. two months had passed and alice had already returned the computer five times for repair. alice finally gave up and demanded her money back. under these circumstances: "
Amalia really wanted that new position at work and knew that in order to get it she would have to increase her skill set and shadow a fellow worker, stan, to learn some new processes. however, every time amalia decided that she had a few minutes to shadow stan she would get caught up in something else and the opportunity would pass. amalia's failure to shadow stan so far speaks to her _______________.
Amalia’s failure to shadow stan so far speaks to her direction. Amalia speak to her direction for wanting to promote to a better position at work and knew that in order to reach it she would have extra work and increase her skill set and ask for stan, her fellow worker, to learn some new process.
Aditya is attempting to classify information regarding a new project that his organization will undertake in secret. which characteristic is not normally used to make these type of classification decisions?
The _____ is a legal document that lists and explains the terms of the partnership
An example of global outsourcing is seen when gap, inc uses low-cost caribbean labor to cheaply produce its clothing, and then finishes off and sells its clothing in the united states.
Global outsourcing is when companies seek cost savings by hiring firms abroad, often to access lower-wage labor markets, demonstrated by Gap, Inc.'s use of Caribbean labor. While cost-efficient for companies, it leads to job losses and poor working conditions in many cases. The garment industry, particularly in regions like Quebec, is a clear example of the drastic shifts and challenges posed by global outsourcing.
Global Outsourcing in Business
Global outsourcing refers to the practice where a company in a developed country hires an outside firm, which can be located abroad, to perform tasks that were previously done internally. This process is driven by the search for cost savings, often taking advantage of lower labor costs in other countries. The example of Gap, Inc. using low-cost Caribbean labor to produce clothing, which is then sold in the United States, showcases this business strategy. Global outsourcing is linked to offshoring, where a company physically moves its operations overseas to capitalize on cheaper labor markets.
Outsourcing became significantly prevalent with globalization and the establishment of trade agreements like the North American Free Trade Agreement (NAFTA), enabling companies to save costs by manufacturing in countries like Mexico and still sell their goods in their home markets like the U.S. Despite its financial benefits to companies, outsourcing has led to various issues like the loss of jobs in developed countries, the rise of sweatshops with deplorable working conditions, and wage exploitation in developing countries.
The garment industry is a telling example of the impact of global outsourcing. In the past, regions like Quebec in Canada were the hub for garment manufacturing. However, the entry of low-cost labor from developing countries has virtually eliminated these local industries, compelling workers in developed nations to find alternative employment or retrain for different sectors of the economy.
Identify and briefly discuss three criticisms of beta as used in the capital asset pricing model
Beta is critiqued on the basis that it relies on historical data to predict future risks, fails to consider market changes, and presumes a consistent risk-reward relationship.
Explanation:
The Capital Asset Pricing Model (CAPM) uses beta to measure the volatility of an asset in relation to the market. However, there are several criticisms of using beta. First, beta assumes that historical volatility predicts future risk, which may not always be accurate as past performance is not always indicative of future results. Second, beta does not account for changing market conditions or structural changes within a firm that may affect its risk profile. Third, it presumes that the risk-reward relationship is linear and consistent, which might not hold in real-world scenarios where asset returns can behave in a more complex manner.
Learn more about Criticisms of Beta in CAPM here:
https://brainly.com/question/10593001
#SPJ3
The ability of rfid to make shopping easy for a store's customers by automating the check-out process creates value for the store by:
Jack graduated from enormous state university with a degree in accounting. he was immediately hired as an auditor by beene kounter associates and placed in their management training program. this program is an example of:
The management training program that Jack participates in at Beene Kounter Associates is an example of on-the-job training, where the employer educates the employee about the necessary skills to perform their job while they are actually working.
Explanation:In the context of the case provided, Jack's experience at Beene Kounter Associates is an example of on-the-job training. Specifically, it's a structured management training program, which means his employer teaches him how to effectively perform his job while he is actually working. This is a common practice in many industries, particularly those like accounting that require a specific set of skills.
Although college students have the opportunity to choose any major, they tend to choose those that offer immediate opportunities to earn money when they graduate, such as accounting. Gaining job-specific skills directly from an employer can provide a richer learning experience and faster career progression, as opposed to classroom education alone.
Learn more about On-the-job Training here:https://brainly.com/question/33157525
#SPJ11
Jack's placement in the management training program at Beene Kounter Associates is an example of a management training program, aimed at developing his skills for a future management role.
Jack graduated with a degree in accounting and was hired as an auditor by Beene Kounter Associates, where he was placed in their management training program. This program is an example of a management training program, which is designed to help new employees develop the skills needed to be successful in management roles within a company. Such programs often encompass a range of training activities including practical work experience, mentoring, and structured learning sessions.If the market price of each camera case is $8 what is the profit-maximizing quantity? 300 units 400 units 500 units 600 units
Profit will be maximum for the firm where marginal revenue = marginal cost.
Since, the market price is fixed at $8 and therefore each additional unit of camera will be sold at $8.
Hence, marginal revenue = $8.
From the table, it is clear that cameras are manufactured in batches of 100.
Marginal cost is the cost incurred to produce one additional unit of camera. It will be calculated by taking the difference of successive variable costs (or total costs) divided by 100.
To produce 400th unit, marginal cost = (2760 - 1960)/100 = $8
Hence, profit maximising quantity isB. 400 (MR = MC)
The profit-maximizing quantity cannot be determined from the given information.
Explanation:The profit-maximizing quantity is determined by finding the quantity where marginal revenue (MR) equals marginal cost (MC).
In the given information, there is no specific mention of marginal revenue or marginal cost. Without this information, it is not possible to accurately calculate the profit-maximizing quantity.
Therefore, it is not possible to determine the profit-maximizing quantity from the given information.
Learn more about Profit-maximizing quantity here:https://brainly.com/question/31852625
#SPJ3
Kelli is a software engineer for an electronics firm. she reports to the manager of software engineering but also works on a new product development team and reports to the team leader in that capacity. based on this information, it would appear that kelli's firm has a _______ structure.
what are the five main columns of a journal?
Approximately what percentage of state and local expenditures do bond referenda account for?
What might explain the decline in trust during this time? explain the decline in trust both in terms of the "moral trust" and "rational trust" views?
Your inheritance will pay you $100,000 a year for five years beginning now. you can invest it in a cd that will pay 7.75 percent annually. what is the present value of your inheritance? (round to the nearest dollar.)
nyoko signs a covenant not to compete with her employer, midstate distribution, inc. the covenant will be enforced if it does not require either party to obtain a business license. is reasonable with respect to geographic area and duration. relieves midstate from liability for any injury to nyoko due to simple negligence. none of the choices.
A non-compete covenant is a type of covenant that is a contractual promise between two parties where one party agrees not to compete with the other part in similar business for a specified period of time and geographic area. Non-compete covenants are enforceable when they are found to be reasonable according to the time period and geographic area limitations. The restriction must protect a legitimate business purpose and not be excessive in that protection.
On october 4, 2017, terry corporation had credit sales transactions of $2,500 from merchandising having a cost of $1,900. the entries to record the day's credit transactions include
I believe that this problem has the following choices:
> a debit of $2,500 to Merchandise Inventory.
> a credit of $2,500 to Sales.
> a debit of $1,900 to Merchandise Inventory.
> a credit of $1,900 to Cost of Goods Sold.
The correct answer from the choices is:
> a credit of $2,500 to Sales
To apply the techniques of process management, processes must be _____.
What possible sources of error could affect the accuracy of your calculated value of the amount of solid in your hand warmer?
Possible sources of error include limitations of the measuring device, the skill of the person making the measurement, and irregularities in the object being measured.
Explanation:There are several possible sources of error that can affect the accuracy of the calculated value of the amount of solid in a hand warmer:
Limitations of the measuring device: The measuring device used to determine the amount of solid in the hand warmer may have a certain level of uncertainty or error associated with it. For example, if the balance used to measure the mass of the solid has a limited precision, it can affect the accuracy of the calculated value.The skill of the person making the measurement: The accuracy of the calculated value can also be influenced by the person performing the measurement. Human errors, such as misreading the measurements or not following the procedure correctly, can introduce inaccuracies.Irregularities in the object being measured: The hand warmer itself may have irregularities or variations in the distribution of the solid material, which can affect the accuracy of the calculated value.