Answers
a. silicon dioxide
b. cottonseed oil
c. water
d. sodium chloride
e. FDC red dye #3
Related Questions
What are the three most abundant elements found on the earths crust that combine to form minerals?
A. Silicon, Iron, Aluminum
B. Oxygen, Silicon, Aluminum
C. Iron, Aluminum, Magnesium
D. Oxygen, Silicon, Iron
Answers
Hope this helps!
Answer:
B. Oxygen, Silicon, Aluminum is the correct answer.
Explanation:
The three most abundant elements found on the earths crust that combine to form minerals are Oxygen, Silicon, Aluminum.
oxygen is the first most abundant element found in the earth's crust, it is present in the main compound of silicate minerals that combines to produce minerals.
The second most abundant element present in the earth's crust is silicon.It combines with oxygen to make silicate minerals.
The third abundant element is aluminum in the earth's crust. The rich compounds of Aluminum contain potassium aluminum sulfate, aluminum hydroxide, and aluminum oxide.
_________ is amount of “ground” an object moves from its starting point and __________ is how much “ground” and object covers in total.
Answers
A radioactive nuclide that is used for geological dating has an atomic number of 19 and mass number 40. Which is the symbol of this nuclide?
Answers
Therefore, the answer is C:
40
K
19
Answer:
C. 40/19 K
Explanation:
If an organism reproduces quickly, its population can ________ faster.
Answers
Answer:
EVOLVE_
Explanation:
If an organism reproduces quickly, its population can ___EVOLVE_____ faster.
Evolution and Reproduction go hand in hand. The more the reproduction the better will be evolution.
- Reproduction causes genetic variation in the off spring
-The species can adopt to new environment due to variation in the genes.
-Offsprings are less prone to diseases.
-therefore, more survival advantage.
When the equation Ca(OH)2 + HBr → (products) is completed and balanced, one term in the equation will be
Answers
Look at the diagram of an electrochemical cell below.
(picture below)
Which part of the cell is the anode?
Na+
SO42-
nickel electrode
platinum electrode
Answers
In an electrochemical cell, there are always two electrodes, the anode and the cathode. The anode is the positively electrode through which the electrons leave the chemical device. In the set up given in this question, the nickel electrode is the anode while the platinum electrode is the cathode. You can easily see this from the half equations that are given in the question.
A flask with vinegar in it has a mass of 160 grams. A balloon with baking soda in it has a mass of 40 grams. The balloon is attached to the flask to seal the opening and the vinegar and baking soda mixes. The balloon inflates to a large volume. What will the total mass of the balloon and flask be after the balloon inflates? Explain.
Answers
The total mass that we started (160+40) will be the same at the end of the reaction.
Since a gas is produced during the reaction it's better to use a ballon to collect this gas and that way preserving the mass.
If 2.4 g of n2 gas has a volume of 0.40 l and a pressure of 6.6 atm , what is its kelvin temperature?
Answers
To solve for the absolute temperature, we assume ideal gas behaviour so that we use the equation:
PV = nRT
or T = PV / nR
So calculating:
T = [6.6 atm * 0.40 L] / [(2.4g / 28g/mol) * 0.08205746 L atm / mol K]
T = 375.35 K
The image formed by a lens may be real or virtual. The image formed by a lens is always virtual.
Answers
The image formed by a lens can be either real or virtual, depending on the position of the object relative to the lens and the type of lens used. Real images are formed when light rays converge at a point after passing through the lens, while virtual images are formed when the extended light rays appear to diverge from a point behind the lens.
The statement is not accurate. The image formed by a lens can be either real or virtual, depending on the position of the object relative to the lens and the type of lens used.
Real Image: A real image is formed when light rays converge at a point after passing through the lens. This image can be captured on a screen because the light rays converge at a specific location. Real images are formed by convex lenses when the object is placed beyond the focal point and by concave lenses when the object is placed within the focal point.Virtual Image: A virtual image is formed when the extended light rays appear to diverge from a point behind the lens. This image cannot be captured on a screen because the light rays only appear to converge when extended backward. Virtual images are typically formed by convex lenses when the object is placed within the focal point and by concave lenses when the object is placed beyond the focal point.So, the statement that the image formed by a lens is always virtual is incorrect. The nature of the image (real or virtual) depends on the specific conditions and the type of lens used.
Answer:
Convex and Concave
Explanation:
Took Test
2NH4Cl(s)+Ba(OH)2⋅8H2O(s)→2NH3(aq)+BaCl2(aq)+10H2O(l) The ΔH for this reaction is 54.8 kJ . How much energy would be absorbed if 24.7 g of NH4Cl reacts?
Answers
The amount of energy absorbed when 24.7 g of NH4Cl reacts according to the given balanced equation is 12.6 kJ.
Explanation:To calculate the amount of energy absorbed when 24.7g of NH4Cl reacts, we need to first convert grams to moles. The molar mass of NH4Cl is 53.49 grams/mole, therefore, 24.7g of NH4Cl in moles is (24.7 / 53.49) = 0.462 mol.
The given balanced equation tells us that 54.8 kJ of energy is absorbed during the reaction of 2 moles of NH4Cl with Ba(OH)2·8H2O, so the amount of energy absorbed when 0.462 mol react is (0.462/2) * 54.8 kJ = 12.6 kJ.
Learn more about Chemistry energy absorption calculation here:https://brainly.com/question/19054372
#SPJ11
The energy absorbed is 25.2 kJ.
Given ΔH = 54.8 kJ, determine the moles of NH₄Cl from 24.7 g, then use stoichiometry to find the energy absorbed.
Calculation: 24.7 g NH₄Cl (molar mass 53.49 g/mol) = 0.46 mol NH₄Cl. Energy absorbed = 54.8 kJ/mol * 0.46 mol = 25.2 kJ.
How many grams of H2 are needed to produce 14.10 g of NH3?
Answers
How many moles of gas were added to a balloon that started with 2.3 moles of gas and a volume of 1.4 l given that the final volume was 7.2 l?
a.12
b.0.085
c.4.4
d.9.5
e.none of the above?
Answers
The number of moles of gas were added to a balloon that started with 2.3 moles of gas and a volume increases from 1.4L to 7.2L is 11.82 moles.
How do we calculate moles?Number of moles of any gas will be calculated by uisng the ideal gas equation PV = nRT, for the given question equation becomes as:
V₁/n₁ = V₂/n₂, where
V₁ = initial volume = 1.4L
n₁ = initial moles = 2.3mol
V₂ = final volume = 7.2L
n₂ = final moles = ?
On putting values, we get
n₂ = (7.2)(2.3) / (1.4) = 11.82 moles
Hence required moles of gas is 11.82 mol.
To know more about ideal gas equation, visit the below link:
https://brainly.com/question/15046679
#SPJ3
Draw a structural formula of an alkene or alkenes (if more than one) that undergo acid-catalyzed hydration and without rearrangement give 1-methylcyclohexanol as the major product.
Answers
The alkene that would undergo acid-catalyzed hydration without rearrangement to give 1-methylcyclohexanol is 1-methylcyclohexene. During hydration, one of the carbon-carbon double bonds breaks, binds with hydrogen, and the other hydrogen forms a bond with the oxygen to form an alcohol.
Explanation:The major product of the acid-catalyzed hydration of an alkene without rearrangement is 1-methylcyclohexanol. This suggests that the initial alkene contains a double bond which would shift to form the alcohol after the reaction. By adding water and acid to an alkene, we have the general reaction mechanism:
The alkene reacts with H2O in the presence of H3O+ (from the acid). One of the alkenes' carbon-carbon double bonds breaks and forms a bond with the hydrogen atom from the H3O+. The other hydrogen from the H3O+ ion forms a bond with the oxygen, resulting in an alcohol.
Therefore, the structural formula of the alkene that would produce 1-methylcyclohexanol through an acid-catalyzed hydration reaction without rearrangement is 1-methylcyclohexene.
Learn more about Acid-Catalyzed Hydration of Alkenes here:https://brainly.com/question/31732900
#SPJ6
Got this question incorrect and no matter how hard I try I can't figure it out!
Answers
10^-3 L / 1 mL
That conversion factor may be derived from 1 L = 1000 mL
=> 1 L / 1000 mL = 1
=> 10 ^ - 3 L / 1 mL = 1
So, you can mutilply by the conversion factor 1 * 10^ -3L / 1 mL because it the equivalent to 1.
The other options are not valid. Let's see why:
1 KL = 1000 L => 1KL / 1000 L = 1
=> 10 ^ - 3 KL / 1 L, which is contrary to the first option.
In that same way you can find the righ conversion factors that relate L with cL, and L with d and you will discard the other options.
H3c6h5o7(aq) + 3nahco3(aq) → 3co2(g) + 3h2o(l) + na3c6h5o7(aq) calculate the number of grams of baking soda (nahco3; molar mass 84.00661 g/mol) that will react with 30.0 ml of 1 m citric acid.
Answers
n of citric acid = (30 mL)(1 L / 1000 mL)(1 mol/L)
= 0.03 mol of citric acid
It is seen in the equation that each mole of citric acid reacts with 3 moles of baking soda.
n of baking soda = (0.03 mol of citric acid)(3 mols baking soda/1 mol of citric acid)
n of baking soda = 0.09 mol of baking soda
mass of baking soda = (0.09 mol of baking soda)(84.00661 g/mol)
mass of baking soda = 7.56 g of baking soda
Answer: 7.56 g
Final answer:
7.560595 grams of baking soda are required to react with 30.0 mL of 1 M citric acid, calculated using the stoichiometry of the reaction where 1 mole of citric acid reacts with 3 moles of baking soda.
Explanation:
To calculate the number of grams of baking soda (NaHCO3) that will react with 30.0 mL of 1 M citric acid (H3C6H5O7), we first use the balanced chemical equation:
H3C6H5O7(aq) + 3NaHCO3(aq) → 3CO2(g) + 3H2O(l) + Na3C6H5O7(aq)
From the equation, 1 mole of citric acid reacts with 3 moles of baking soda. Since we have 30.0 mL of a 1 M solution of citric acid, which is equivalent to 0.030 liters, the number of moles of citric acid is 0.030 moles (1 M × 0.030 L).
Knowing the moles of citric acid, we can find the moles of baking soda needed:
0.030 moles H3C6H5O7 × (3 moles NaHCO3 / 1 mole H3C6H5O7) = 0.090 moles NaHCO3To find the mass of 0.090 moles of baking soda:
Mass = moles × molar massMass = 0.090 moles × 84.00661 g/mol = 7.560595 gTherefore, 7.560595 grams of baking soda are required to react with 30.0 mL of 1 M citric acid.
Suppose you decide to define your own temperature scale using the freezing point (13 ∘c) and boiling point (360 ∘c) of oleic acid, the main component of olive oil. if you set the freezing point of oleic acid as 0 ∘o and the boiling point as 140 ∘o, what is the freezing point of water on this new scale?
Answers
What is the molarity of a naoh solution if 11.9 ml of a 0.220 m h2so4 solution is required to neutralize a 25.0-ml sample of the naoh solution?
Answers
So moles of protons = 0.01 x 2 = 0.02 moles of H+
For neutralization: moles H+ = moles OH-
Therefore moles of NaOH = 0.02
conc = moles / volume
Conc NaOH = 0.02 / 0.025L = 0.8M
Answer : The concentration of the [tex]NaOH[/tex] is, 0.209 M
Explanation :
Using neutralization law,
[tex]n_1M_1V_1=n_2M_2V_2[/tex]
where,
[tex]n_1[/tex] = basicity of an acid [tex]H_2SO_4[/tex] = 2
[tex]n_2[/tex] = acidity of a base (NaOH) = 1
[tex]M_1[/tex] = concentration or molarity of [tex]H_2SO_4[/tex] = 0.220 M
[tex]M_2[/tex] = concentration or molarity of NaOH = ?
[tex]V_1[/tex] = volume of [tex]H_2SO_4[/tex] = 11.9 ml
[tex]V_2[/tex] = volume of NaOH = 25.0 ml
Now put all the given values in the above law, we get the concentration of the [tex]NaOH[/tex].
[tex]2\times 0.220M\times 11.9ml=1\times M_2\times 25.0ml[/tex]
[tex]M_2=0.209M[/tex]
Therefore, the concentration of the [tex]NaOH[/tex] is, 0.209 M
How does thermal energy transfer when a room is heated by a furnace?
Answers
Answer:
the anser is b
Explanation:
Use the given molar solubilities in pure water to calculate ksp for each compound. part a bacro4; molar solubility =1.08×10−5m
Answers
The expression for Ksp is [Ba2+] x [CrO42-]
There is a 1:1 molar ratio between the BaCrO4 that dissolves and Ba2+ and CrO42- that are in solution. This means that, when 1.08×10⁻⁵ moles per liter of BaCrO4 dissolves, it produces 1.08×10⁻⁵ mol/L of Ba2+ and 1.08×10⁻⁵ of CrO42-. So, applying the expression:
Ksp = (1.08×10⁻⁵ ) x (1.08×10⁻⁵ )
= 1.166 x 10⁻¹⁰
To calculate the Ksp for barium chromate (BaCrO₄), we use the given molar solubility of 1.08 × 10⁻⁵ M. The equilibrium concentrations of the ions are equal to the molar solubility, and the Ksp is calculated as (1.08 × 10⁻⁵)², resulting in 1.1664 × 10⁻¹⁰
To determine the solubility product constant (Ksp) for barium chromate (BaCrO₄), we need to use the given molar solubility in pure water, which is 1.08 × 10⁻⁵ M.
The dissociation equation for BaCrO₄ in water is: BaCrO₄ (s) ⇌ Ba²⁺ (aq) + CrO₄²⁻(aq)At equilibrium, the concentration of Ba²⁺ ions is equal to the molar solubility, s, and the concentration of CrO₄²⁻ ions is also s.
Thus, the Ksp expression is given by: Ksp = [Ba²⁺][CrO₄²⁻] = s × s = s²Plugging in the given molar solubility:
Ksp = (1.08 × 10−5)²Ksp = 1.1664 × 10⁻¹⁰Therefore, the solubility product constant (Ksp) for barium chromate (BaCrO₄) is 1.1664 × 10⁻¹⁰
Correct question is: Use the molar solubility 1.08×10⁻⁵M in pure water to calculate Ksp for BaCrO₄
For the element barium, which wavelength of light is produced by the largest drop in energy for an electron? Which represents the smallest drop? Explain.
Answers
Red, orange, yellow, green, blue, indigo, violet
Moreover, the lower the wavelength of a wave, the greater the energy it has. Because a larger transition in electron state releases a larger amount of energy, it will produce light of lower wavelength. Conversely, a smaller change in energy will release light with a higher wavelength.
Answer:
The wavelength decreases in the order:
Red, orange, yellow, green, blue, indigo, violet
Because a larger transition in electron state releases a larger amount of energy, it will produce light of lower wavelength. Conversely, a smaller change in energy will release light with a higher wavelength.
Explanation:
A compound with the empirical formula SiH3 was found to have a molar mass of approximately 62 g. What is the molecular formula of the compound?
Answers
so, empirical formula mass x n = molecular formula mass
Mass of Si = 28.0855 and H = 1.008
(28.0855 g + 3 x 1.008g) x n = 62 g
31.1095 x n = 62
31.1095 is equal to 31 approximately
n = 62/31 = 2
So, 2 x SiH₃ = Si₂H₆
Si₂H₆ is the molecular formula of the compound.
The molecular formula of a compound with the empirical formula SiH3 and a molar mass of 62 g is Si2H6.
Explanation:The subject of the question is the molecular formula of the compound with the empirical formula SiH3 and a molar mass of 62 g. The empirical formula mass of this compound can be calculated from its components: Si stands for silicon, with an atomic mass of roughly 28 g/mol, and H stands for hydrogen, with an atomic mass of roughly 1 g/mol. So the total atomic mass of SiH3 would be 31 g/mol. Comparing this with the given molar mass of 62 g/mol, we can deduce that the molecule contains two empirical formula units. Therefore, the molecular formula should be Si2H6.
Learn more about Molecular Formula here:https://brainly.com/question/28647690
#SPJ11
Will ag2so4 precipitate when 100 ml of 5.0×10−2 m agno3 is mixed with 10 ml of 5.0×10−2mna2so4 solution?
Answers
Silver sulfate (Ag₂SO₄) does not precipitate when 100 mL of 5.0×10⁻² M AgNO3 is mixed with 10 mL of 5.0×10⁻² M Na₂SO₄ because the reaction quotient is less than the solubility product constant.
Precipitation of Ag₂SO₄ When Mixing Solutions:
To determine if silver sulfate (Ag₂SO₄) will precipitate when mixing 100 mL of 5.0×10⁻² M AgNO₃ with 10 mL of 5.0×10⁻² M Na₂SO₄, we need to calculate the concentrations of Ag⁺ and SO₄ ²⁻ ions after mixing.
First, calculate the moles of each ion:
Ag⁺: 0.1 L × 5.0×10⁻² M = 5.0×10⁻³ molesSO₄²⁻: 0.01 L × 5.0×10⁻² M = 5.0×10⁻⁴ molesWhen mixed, the total volume is 110 mL (0.110 L), so the new concentrations are:
[Ag⁺] = 5.0×10⁻³ moles / 0.110 L ≈ 4.55×10⁻² M[SO₄²⁻] = 5.0×10⁻⁴ moles / 0.110 L ≈ 4.55×10⁻³ MThe solubility product (Ksp) of Ag₂SO₄ is 1.2×10⁻⁵. To check for precipitation:
Q = [Ag⁺]² [SO₄²⁻] ≈ (4.55×10⁻²)² × 4.55×10⁻³ = 9.45×10⁻⁷
Since Q < Ksp (9.45×10⁻⁷ < 1.2×10⁻⁵), Ag₂SO₄ does not precipitate.
Is there a relationship between the range of accessible oxidation states and sulfur's position on the periodic table?
Answers
Determine the number of atoms in a 48.3-g sample of zinc. express your answer in zinc atoms using scientific notation.
Answers
Since you are asked the amount of atom, you need to multiply the unit in mole with Avogadro number. The calculation should be: 0.74 * 6.02 * 10^23= 4.45* 10^23 molecules
Classify these compounds as strong electrolytes, weak electrolytes, or nonelectrolytes k3po4
Answers
According to solubility, potassium phosphate is weak electrolyte.
Solubility is defined as the ability of a substance which is basically solute to form a solution with another substance. There is an extent to which a substance is soluble in a particular solvent. This is generally measured as the concentration of a solute present in a saturated solution.
The solubility mainly depends on the composition of solute and solvent ,its pH and presence of other dissolved substance. It is also dependent on temperature and pressure which is maintained.Concept of solubility is not valid for chemical reactions which are irreversible. The dependency of solubility on various factors is due to interactions between the particles, molecule or ions.
Learn more about solubility,here:
https://brainly.com/question/31493083
#SPJ6
do free electrons exist under normal conditions
Answers
Consider the hydrocarbon below.
What is the name of this hydrocarbon?
1-ethyne
1-pentyne
1-ethane
1-butyne
Answers
Ethyne belongs to the alkyne family of the hydrocarbon and it is the simplest member of that family. It is made up of two carbon atoms and two hydrogen atom that has one triple bond between them. Ethyne is a gas at room temperature and it is widely used as fuel. As a fuel, it is easily ignited and it burn with a sooty flame; the gas is lighter than air.
Looking at the diagram given, you can determine the number of carbon in the structure by counting the number of joints in the structure, that is the location of the carbon in the structure. The structure we are given have two joints, which means two carbons are present. Out of all the options given, it is only ethyne that has 2 carbons and a triple bond in its structure. Pentyne has 5 carbon, butyne has 4 and ethane is an alkane which has 5 carbon atoms and single bonds in its molecule.
Answer: Option (b) is the correct answer.
Explanation:
The given hydrocarbon has five carbon atoms. Also, there is a triple bond at the extreme right end, therefore it is an alkyne.
Since there is only a triple bond in the give hydrocarbon chain. So, numbering will be started from extreme right end in order to give least number to the triple bond.
Hence, name of the given hydrocarbon is 1-pentyne.
A boy is pushing on a heavy door, trying to slide it open. His friend stands behind him and helps him push.
How have the forces changed?
A.
The net force applied will increase.
B.
The net force will decrease.
C.
There will be less friction.
D.
The applied force will not change.
Answers
What is the mass of 3.00 moles of magnesium chloride, MgCl2? Express your answer with the appropriate units.
Answers
The mass of 3.00 moles of magnesium chloride (MgCl2) is calculated by multiplying the number of moles by the molar mass of MgCl2, giving a result of 285.63 grams.
Explanation:To calculate the mass of 3.00 moles of magnesium chloride (MgCl2), we will use the molar mass of MgCl2. The molar mass of MgCl2 is 95.21 grams per mole. Therefore, to find the mass, multiply the number of moles by the molar mass:
Mass = moles × molar mass
Mass = 3.00 moles × 95.21 g/mol = 285.63 grams of MgCl2
The mass of 3.00 moles of magnesium chloride is thus 285.63 grams.
What reagent would distinguish between Ag+ and Fe3+?
Answers
When the reagent sodium iodide is added to distinguish the Ag⁺ ions and Fe³⁺ ions, it will react and form precipitate with one, while have no precipitates formed with the other, so that is how we can distinguish both of them.